8847 REPAIRS TO INTERNAL WIRING AND OTHER CONNECTED WORKS AT KANDIVALI AND MARVE UNDER GE NORTH MUMBAI

Amount

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Taking down of old DBs with MCB / fuses of any size and ratings complete from the position after disconnecting the electrical connection all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (not less than 20mm wide) or 20mm dia non metallic rigid PVC conduit (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable switch / socket outlet shall be reused.

(a) One light / Fan / Exhaust fan / bell point controlled by one, one way switch

(b) One 3 pin 5/6 Amps switch socket combination point on independent board.

(c) One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 3.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

All as per item No. 3.00 described here - in - before but for 3 pin 20/25 Amps switch socket combination on independent board with 4.0sqmm copper cable and provision of 4.0sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including heavy duty grade stove enamelled steel conduit 20mm dia (ISI marked) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge. Note: Serviceable switch / socket outlet shall be reused.

(a) One light / Fan / Exhaust fan / bell point controlled by one, one way switch

(b) One 3 pin 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

(c) One 3 pin 5/6 Amps switch socket combination point on independent board.

All as per item No. 6.00 described here - in - before but for 3 pin 15/16 Amps switch socket combination on independent board with 2.5sqmm copper cable and provision of 2.5sqmm PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix surface / recess mounted LED ceiling light fitting, 2 x 2 ft, 230V, 50Hz complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including lamp duly fixed on the false ceiling with necessary fixing arrangement such as screws / fasteners etc complete all as specified and as directed. Make : Cat No BZRSQL 36W GZ1 CW of Bajaj or equivalent in Havells / Philips / Sakthi / Wipro

Supply and fix sleek square recessed mounting LED down light with AL die cast body LED ceiling light fittings, 15W, 230V, 50Hz complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including lamp duly fixed on the false ceiling with necessary fixing arrangements such as screws / fasteners etc complete all as specified and as directed. Make : Cat No BGSLO SLEEK 15W WH SQ of Bajaj of equivalent in Havells / Philips / Sakthi / Wipro

Supply and fix in repair LED Pendant luminaries light fittings, hanging type 1 x 20w, 4 feet, 230v with long hanging steel wire rope all prewired fixed on ceiling / walls with all fixing accessories such as nuts, bolts, screws etc and connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Cat No BPTX 20W LED 4FWH of Bajaj of equivalent in Havells / Philips / Sakthi / Wipro

Supply and fix LED Tube light fittings decorative box type, PVC end caps blue coloured including with retrofit LED tube rod 20W (T8 type) with necessary prewired, connecting with three core copper flexible cable 16/0.20mm from ceiling rose to fittings complete all as specified and as directed. Make : Crompton Grieves CAT Part No DMLN1LT8-16 and tube rod : LTT8-16 or equivalent in Halonix, Wipro, Havells, Sakthi

Supply and fix, decorative ultra slim square profile LED tube light fitting, 1X 10 watts, 230 volt, all pre-wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0. 20sqmm complete all as specified and directed by Engr-in-Charge, Make : Havells Cat Part No LHEXBTP71N1W009 or equivalent in Bajaj / CG / Phillips

Supply and fix angle holder, PVC/Polycarbonate type with back plate suitable for batten / angular fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix LED bulb 9 watts, Retrofit type suitable for lamp holder / bulk head fittings all as specified and as directed by Engineer-in-Charge. Make: Havells / Bajaj / Sakthi / Phillips

Supply and fix Switch Piano, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Havells

Supply and fix Switch bell push, flush type, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Call bell electric (Ding Dong type) suitable for working on 240 volts AC supply multi music type complete all as specified and as directed. Make: Anchor / Legrand / L&T

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix switch socket outlet, combination 2 Pin 6Amps / 3 Pin 6Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix socket outlet, combination 2 in 1, 3 Pin, 6/16Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix stepped type electronic fan regulator on existing phenolic laminated sheet etc complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB SPN 8 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 53 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs double door, sheet metal enclosure powder coated MCB DB TPN 4 way with 200 Amps rated bus bar, 415 volt, horizontal type, IP 53 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCB SP, 6 Amps to 32amps, 240 volts,10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCB SPN/DP, 32 Amps, 240 volts,10 KA, 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs double door, sheet metal enclosure powder coated DB VPTN 4 way, vertical type with 200 Amps rated bus bar, 415 volt, IP 43 protection with provision for DPX 125 MCCB as incomer and SP/TP MCB as outgoing flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCCBs 125 Amps, 25KA, 4 pole with adjustable thermal & magnetic settings complete all as specified and as directed by Engineer-in-Charge. Make : Legrand Cat Part No. 4200055 / L&T / Havells

Supply and fix in repairs MCB TPN, 63 Amps, 415 volts,16 KA 'C' series complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells

Supply and fix in repairs MCB protected power unit with one 25 Amps socket including 3 pin plug top, MCB DP and starter 25 Amps rating with six module plate and flush metal GI box complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Legrand / L&T

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC casing /caping of suitable size including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and one run of 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC casing/caping shall be measured as one unit length.

Material and labour for submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC casing /caping of suitable size including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and one run of 2.5sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 2.5sqmm cable and one run of PVC casing/caping shall be measured as one unit length.

Material and labour for Earthing complete with Galvanised steel earth plate electrode 600mm x 600mm x 6.0 mm thick, buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) connected to GI wire 4mm dia, by means of GI bolts, nuts, check nuts and washer etc, to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR- 2009 Part-I other end connected to Panels, laid under floors/plinths or fixed on walls or concealed in wall etc; with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, including PCC chamber in cement concrete (1:2:4) type B-1(using 20 mm graded aggregate) and finished even and smooth without using extra cement, M.S angle iron frame 50x50x6mm, cast iron cover with locking arrangement, with, GI 20 mm bore medium grade pipe and MS funnel with wire mesh for watering arrangement, GI pipe light grade 15mm bore for protection of GI wire, necessary excavation and earth work in any type of soil / strata & testing complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs compact building security light luminaries 25 watt LED light including bracket made out of 40mm light grade GI pipe not less than 1.2m, ISI marked duly fixed with MS clamps of 3mm thick-2 Nos, bolts, nuts etc complete all as specified and as directed by Engineer-in-Charge. Make: Cat Part No BRLEP 25W LED of Bajaj or equivalent in CG / Philips / Havells

Supply and fix meter box replacement with new meter box for housing meter and MCB's made out of 2mm thick CRCA sheet duly painted with two coated synthetic enamel paint over a coat of red zinc chrome primer of size 0.60m x 0.60m x 0.20m including fixed in angle iron stand grouted in wall and refixing of existing / new tamper proof meters and MCBs including providing wiring of suitable size of copper conductor cable and including necessary masonry works with wooden planks for mounting meters and MCBs complete and taking down the old U/S meter box and making good the surface as required all as specified and as directed by Engineer-in-Charge.

joshua construction

AZIM ENTERPRISES

Vishal Builders