Construction of SAMETI Building at Directorate of Agriculture Sanjenthong, Imphal East District Manipur.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.

1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work @1 kg per 50 kg of cement.

Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finnal with a piece of cloth lightly soaked in Kerosene oil.

1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Thermo-Mechanically Treated bars

Foundation,footings,bases of columns etc.and mass concrete

Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick.

Edgesof slabsand breaksin floor walls under 20 cm wide

Columns, pillars , post and struts (square, rectangularor polygon in plain)

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Stairs, (excluding landings) except spiral-staircases.

Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement mortar 1 : 3 (1 cement : 3 coarse sand)

Local best quality Teak wood

35 mm thick shutters

Providing 40x3 mm flat iron hold fast 40 cm long i/c fixing to frames with 10 mm dia. bolts nuts and wooden plugs and embedding to cement concrete block 30x10x15 cm 1:3:6 (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal gauge).

Providing and fixing 75 x 60 mm moulded hand rail in straight lengths complete Uningthou wood.

Providing & fixing 75 mm x 60 mm Uningthou wood scrolls made to suit the moulded hand rails (dia of scrolls to be three times the width of hand rails 75 mm x 60 mm).

Providing & fixing 25mm x 25mm Uningthou wood balusters 25mm x 25mm square, wrought fixed with ends housed(square or splay) to hand rails &treads or strings complete.

Size of Tile 600 x 600 mm

Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours White, Ivory, Grey, Fume Red,, Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Raj Nagar plain.

8 mm thick.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

1:4 (1 cement : 4 fine sand)

1:4 (1 cement : 4 fine sand)

New work (two or more coats) over and including priming coat with cement primer:-

Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Water thinnable cement primer

New work (Two or more coats applied @ 3.84 kg/10 sqm)

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Centering and shuttering including strutting, propping etc. and removal of form for: i)Foundations, footings, bases of columns, etc. for mass concrete.

ii)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level: i)1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

ii)1:2:4 ( 1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

iii)1:3:6 ( 1 Cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

i)2x1.5sqr mm +1x1.5sqr mm earth wire

i)2x2.5 sq.mm+ 1x2.5 sq.mm earth wire

ii)2x4 sq.mm+1x4 sq.mm earth wire

iii) 2x6mm sq. + 1x6mm sq. earth wiring

Group c

Group C

S/F 48'' sweep fan complete with down rod, canoy, 3 (three) blades but without egulator etc as reqd. (Make Bajaj /Usha or similar)

Stepped type Modular Fan regulator

S/F 305 sweep exhaust fan complete with all accessories i/c connection etc as reqd.

i)6 pin 15/16 amps socket outlet

ii) 5/6 amps switch

iii) 15/16 amps switch

6 amps to 32 amps Ratings, SP MCB, "B" series 10 KA breaking capacity

12 way, SPN single door, MCB DB

i) 40 amps

P/F 125 amp. TPN stand ground on load change over switch (compact design)415/500 V Including connection etc as reqd.

P/F 200 amp. TPN stand ground on load change over switch (compact design)415/500 V Including connection etc as reqd.

S/f Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 100 amp capacity complete with all accessories i/c connection earthing the bodt etc. as reqd.

20 mm junction box, one way

20mm junction box,two way

40 mm dia. ISI marked, PVC conduit

40 mm PVC bends

Modular GI box 4 module

Modular GI box 6 module

Earthing with G.I earth plate 600mmx600mmx6mm thick i/c accessories and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc.(but without charcoal or coke and salt) as required.

Extra for using Salt and charcoal for G.I. or copper plate earth electrode as reqd.

P/F 4mm dia copper wire on surface or in recessed for loop earthing as reqd.

Havells Octane 15W LED Recessed Round Panel Light/ Warm White/Slim Design/Energy Efficient / Upto 3KV Surge Protection/remium ownlight for Home andOffice/ BIS Approved

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

All work upto plinth level:

1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work @1 kg per 50 kg of cement.

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level and above plinth level

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundation,footings,bases of columns etc.and mass concrete

Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:4 (1 cement: 4 fine sand)

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & Ci.I. brackets, 40mm flush bend , overflow arrangements with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and flors wherever required

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink drain board 510x1040mm bowl depth 178mm

Providng and fixing 8mm dia C.P. / S.S Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C of quality and make as approved by Engineer-in-charge.

Providing and fixing CP brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge

Providing and fixing PVC waste pipe for sink or wash basin iincluding P.V.C waste fittings complete.

Semi rigid 40mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing toilet paper holder:

C.P. brass

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

External work

40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the wall etc.

20 mm nominal outer dia Pipes

Providing and fixing brass bib cock of approved quality :

20 mm nominal bore

Providing and fixing brass bib cock of approved quality :

20 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :

100 mm dia Ductile Iron Class K-7 pipes

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

15 mm nominal bore, weighing not less than 32 gms

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes

75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

Coupler

75 mm bend

12.38.6. Shoe (Plain)

75 mm Shoe

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.