Improvements to road from Kotihal village to Benchi Camp in Siruguppa Taluk Ballari Dist

Improvements to road from Kotihal village to Benchi Camp in Siruguppa Taluk Ballari Dist

Improvement of Road Kotihal Village to Benchi Camp in Siruguppa Taluk Ballari Dist. Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees gi...

Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades,levels and dimensions. Excavated material to be used in embankment with a lift upto 3m ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment with approved materials deposited at site from

roadway cutting and excavation from drain and foundation of other structures

graded with desired compaction.

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and

compacted to mee...

Construction of Granular Sub-Base by Mix in Place Method

by providing well graded Gravel, spreading in uniform

layers with motor grader on prepared surface, mixing by

mix in place method with rotavato...

Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of

specific sizes to water bound macadam specification including

spreading in uniform thickness, hand packing, rolling w...

Water Bound MacadamProviding, laying, spreading and compacting stone aggregates of

specific sizes to water bound macadam specification including

spreading in uniform thickness, hand packing, rolling w...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/m2 using mechanical...

Providing and applying tack coat with RS1 Bituminous Emulsion

using emulsion pressure distributor at the rate of 0.20 kg/m2 on

the prepared bituminous surface cleaned with mechanical broom

Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported t...

Providing, laying and rolling of close-graded premix surfacing

material of 20 mm thickness composed of 11.2 mm to 0.09 mm

(Type-A) or 13.2 mm to 0.09 mm (Type-B) aggregates using VG-

30 bitumen to req...

Providing and constracting un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Providing and fixing of retro- reflectorised cautionary,

mandatory and informatory sign as per IRC:67:2022 made

of Class B Type IV retro reflective sheeting fixed over 2 mm

thick aluminium sheeting vi...

Providing and erecting direction and place identification retroreflectorised

sign as per IRC:67:2022 made of high intensity

grade sheeting vide clause 801.3, fixed over aluminium

sheeting, 2 mm thick ...

Kilometre Stone Reinforced cement concrete M15grade kilometre stone of standard design as per IRC 8-1980, fixing in position including painting and printing etc (odrinary KM stone (pre cast)

Hectometer stone (precast) Reinforced cement concrete M15grade kilometre stone of standard design as per IRC 8-1980, fixing in position including painting and printing etc Ordinary 200 m stone

Providing and fixing of typical Logo board as perspecifications and drawing. Two ACP Sheet of 3mm thick,top and Bottom plate duly welded/bolted with MS Squareangle 25mm x25mmx 5mm size on back and on ...

Providing and laying 60mm thick factory made precast M-30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour laid i...

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includi...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 2000mm Standa...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and she...

Open Conduit System Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plug...

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.

Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 4...

Fabricating supplying and mounting MS box made out 14SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40Amps

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 32-40Amps 4 pole

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

GI/Copper strips for grounding connections, using necessary fixing

materials as required. 25X3mm GI Strip

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends / End-caps of same materials in existing trench as per IS 14930 part -II su...

Aluminium End Terminal (Lug) 10sqmm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 10 Sq...

Laying of cable in Existing Trench GI pipe Stone Ware RCC Hume pipe using wooden Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm

Earth work excavation for pipelines/cables by Manual means upto 600 mmtrench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights,...

Refilling available earth around trenches/pipelines, cables in layers not

exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.For Foundations of Bridges

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 15"x12...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps

Providing and erecting overhead signs with a corrosion

resistant 2mm thick aluminium alloy sheet reflectorised with

high intensity retro-reflective sheeting as per IRC:67:2022 with

vertical and latera...

Providing and erecting overhead signs with a corrosion

resistant 2mm thick aluminium alloy sheet reflectorised with

high intensity retro-reflective sheeting as per IRC:67:2022 with

vertical and latera...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications.including setting out. shoring, strutting.

barricading, caution lig...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Additionalities for Formwork, Centering & Scaffolding Haed Wall structures8%

Additionalities for Formwork, Centering & Scaffolding drain 35%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying reinforced cement concrete pipe NP3

for culverts on first class bedding of granular material in

single row including fixing collar with cement mortar 1:2

but excluding excavation,...