Development of Yercaud as a Tourist Destination, Salem District (IInd Call)

Clearing the site Clearing Heavy Jungle and stacked away from the Site etc. complete complying with standard specification

Clearing the Heavy Jungle by deploying JCB and the same stacked away from the work spot for disposal. The rate inclusive of Hire charges for machinary, fuel and driver betta,etc. complete complying with standard specification

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and ramimng of bottoms Upto 2.40m Footing Depth. etc. complete complying with standard specification

Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and ramming of bottoms etc., complete complying with standard specification

Breaking, removing and stacking for pre-measurements of existing hard rock to the required depth by cutting, drilling, breaking by using suitable special type cutting equipments with heavy breaker / diamond saw cutting machines / wire type saw machine with diamond impregnated beads wire / rock disintegrating chemicals / rock splitter / mounded breaking, wedging, chiseling trimming to proper shape where blasting is prohibited and without any environmental hazard, any vibrations and disturbance to the nearby any existing structures. The rate includes mobilizing transferring from one place to another / re-installing from one place to another / re-installing with all accessories & operating all the required materials, tools & plants viz suitable crane & drilling holes on the existing rock strata connecting the diamond cutting rope to the machine and also lifting, loading, conveying tackles along with the required labourers, electricity / DG power or Generator, watering and excavating the rock portion and depositing the same at a distance from the excavated area away from the work without obstruction to the work as specified by the departmental officers with all leads & lifts and traffic, including all incidental charges, fuel charges to all machineries, hire charges, crew charges etc complete complying with standard specifications

Drilling holes in hard granite 40mm diameter and placing of anchor with grouting with cement slurry used, finishing and curing etc. complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling Crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification

Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification

Brick work in following Cement Mortar 1:3 using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. a)For foundation & basement

For foundation & basement

In Ground floor

Brick work in following Cement Mortar 1:6 using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done etc. complete complying with standard specification a)In Ground floor

Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete complying with standard specification a)In Ground Floor

Damp proof course with Cement Mortar 1:4 (One Cement and Four sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation.

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed etc. complete complying with standard specification a)Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc upto 3.60m height

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided etc. complete complying with standard specification a)Centering for RCC slab surfaces upto 3.60m height

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be providedetc. complete complying with standard specification a)For plane surfaces such as rectangular or square RCC columns etc

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers A). Upto 2.10m Height of Shuttering

Supplying and erecting Shoring Shuttering with necessary supports to Retain Earth using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with MS Channel Section (ISMC 100) as Horizontal stiffener provided at top, bottom and every sheet joints. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C with lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) etc. complete complying with standard specifcation A). Upto 3.60m Height of Shuttering

In foundation and basement

In Ground floor

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using 20mm HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. a)75mm thick slab

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.

Supplying and fabricating the Mild steel steps and handrails using MS angle sections suitable sizes of . 150mm x 75mm x 6.5mm , 75mm x 40mm x 5mm and M.S sheet - 6mm thick The rate inclusive of using necessary mild steel angles for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Supplying and fixing colour Shingles for Roof covering material fixed in position with all necessary accessories complete complying with standard specification

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specification

Paving the floor with best quality Double charged Virtified tiles of size 600 x 600 x 10mm tk of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Providing full nosing to the steps or platforms to the Granite slab of 20mm thick including neat finishing, polishing, cost of powder, tools etc etc. complete complying with standard specification

Flooring with Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification

Dadooing Ceramic Tiles of size 300mm x 600mm x10mm best approved quality, white / colour glazed tiles set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. /sq.mneatly in all floors, curing, etc., complying with standard specification

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification

Paving the floor with pre-polished Sadarahalli gray cut stone of size 300x300x 40mm thick and Chambering 10mm 4 sides of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification

Manufacturing supplying and fixing of steel door Single leaf with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.

Supplying & fixing of WPC (Wood Polymer Composite) Door, Frame extruded with size 75mm x 50mm. The single core door made of rigid WPC compound with minimum Bulk Density of 900 KG/ Cub.Mt. & shore hardness of 55. Supplying & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. For the aesthetic appearance, the door shall be a printed digitally on one side of the shutter. The WPC door shall be fixed into the WPC frame with 3 Nos of 5” SS Hinges and the door shall have 2 towerbolt on one side and 1 towerbolt or aldrop on other side for locking system and 2 numbers of handle on the either side of the door shutter, all made of aluminium.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specification and as directed by the departmental officer.( The materials quality,brand, colour, shade should be approved by the Executive Engineer before use on works).

Supplying and fixing of WPC swing door, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/ Cub.Mt. & shore hardness of 55. The door shall be a plain matt board .The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 6” in SS, with neccessary locking arrangements etc.The rate is inclusive of all materials, labours, conveyance and fixing in position with all other incidential charges etc., complete complying with standard specfication and as directed

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. etc. complete complying with standard specification

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. etc. complete complying with standard specification

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical chargesetc. complete complying with standard specification

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase near wet riser using 50mm dia 304L GradeStainless Steel pipe of 1.60mm thick will be provided withtubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60m thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges,etc. complete complying with standard specification

Supplying and fixing of M.S.Grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation chargesetc. complete complying with standard specification ROLLING SHUTTERS (WITH ISI MONOGRAM) a)Manually operated (up to 8 m2 area)

Providing suspended Hilux Board False Ceiling of the following types with G.I. perimeter channel of size 0.55mm tk (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling , screw fixed to brick wall/ partition with the help of nylon sleeves and screws at 610mm centres. Then suspending G.I. Intermediate channel of size 45mm (0.90mm thick with two flanges of 15mm each) from the soffit at 1200mm centres with ceiling angle of 25mmx 10mmx0.50mm thick fixed to soffit with G.I Cleat and steel expansion fastners ceiling section of 0.50mm thickness having knurled web of 51.50mm and two flanges of 26mm each with lips of10.50mm are then fixed to the intermediate channel at 457mm centres. 12.50mm tapered edge Gyp board (confirming to is 2095-1982) is then screw fixed to ceiling section with25mm dry wall screws at 230mm centres. Screw fixing should bedone mechanically either with screw driver or with drilling machine with suitable attachment got approved by the Executive Engineer before use on works in etc., complete complying with standard specification. a)8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling

Providing Cornice Work for Gyp Board False Ceiling etc., complete in all floors complying with standard specification

Supplying and fixing fine polished cuddapah slab of 38 / 40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all and including Sinage direction and name sticker fixed eic complete complying with standard specification

Providing and Laying wetmix mecadam of 150 mm compacted thickness in 2 layers of 75 mm thick or else as specified on the prepared sub base with grade store aggregate and granular material of quality size and grading pasting in layer with motor grader and compaction with vibrating orller of 80/100 KN static weight and fine dressing for required grade and cross slope as shown on the drawing equipments safty measures etc. complete complying with standard specification

Supplying and laying Rubber moulded Hydraulic pressed Paver Block of 83mm thick approved design made out of 6 - 10mm thick HBGS chips in CM 1:2:4 properly laid to attain the required strength laying the Rubber Moulded Paver Block over a sand cushion of 10cm thick and well compacted using 1-3 tonne capacity compactor machine of manufacturing the inter locking blocks , loading, transportation , unloading and other incidential charges etc. complete complying with standard specification

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Three sand), 12mm thick used finishing in all floors including curing etc., complete complying with standard specification

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface ect., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification.

Supplying, laying and jointing 25 mm dia CPVC Pipe OF Standard Dimension Ratio 11 (Pressure class 1) conforming to IS:15778 - 2007 of approved quality and best variety of the following dia including cutting and fixing CPVC specials using CPVC adhesives (Solvent Cement) (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications and as directed by the departmental officers. (The CPVC pipes shall be got approved by Executive Engineer before use on works) - Internal water supply above ground level. etc. complete complying with standard specification

25 mm dia CPVC Elbow

25 mm dia CPVC TEE

25 mm dia CPVC Union

25 mm dia CPVC Nipple

25 mm dia UPVC Pipe

32 mm dia UPVC Pipe

40 mm dia UPVC Pipe

25 mm dia UPVC Pipe

32 mm dia UPVC Pipe

40 mm dia UPVC Pipe

50 mm dia UPVC Pipe

25 mm dia union

32 mm dia union

40 mm dia union

50 mm dia union

25 mm dia Elbow

32 mm dia Elbow

40 mm dia Elbow

50 mm dia Elbow

25 mm dia Tee

32 mm dia Tee

40 mm dia Tee

50 mm dia Tee

32 x 25 mm dia Reducer

25 x 20 mm dia Reducer

20 x 15 mm dia Reducer

25 mm dia G.M. Gate Valve

32 mm dia G.M. Gate Valve

40 mm dia G.M. Gate Valve

50 mm dia G.M. Gate Valve

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications

Supplying and fixing in position color glazed European Water Closet 10 litre capacity PVC flushing tank fixed on to wall of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.

Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). a)Colour Glazed Wash Hand Basin Without Pedestal

Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary etc. complete complying with standard specification

Supplying, laying and jointing glazed stoneware pipes of 110mm dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn, so that the waste water can be drained to the trenches already available, excluding cost of earth work excavation, cost of re-filling with sand / earth, but including laying the pipe in true alignment and gradient and conducting required water supply test for draining with necessary tools and plants, etc., complete complying with standard specifications.

75mm dia PVC soil / waste pipe

110mm dia PVC soil / waste pipe

75mm dia PVC Elbow

75mm dia PVC Tee

75mm dia PVC Tee with single door

75mm dia PVC Bend

110mm dia PVC Elbow

110mm dia PVC Tee

110mm dia PVC Tee with single door

110mm dia PVC Bend

Supplying and fixing position PVC Nahani Trap / Floor Trap of the 100 x 75mm with stainless steel gratings sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification.

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Up to 150m Below Ground Level

From 151m up to 180m

From 181m up to 210m

From 211m up to 240m

From 241m up to 270m

From 271m up to 300m

Supplying of best approved quality of PVC casing pipe of 6" dia for borewell with socket end to suit borewell of required depth -6kg/cm2 best approved quality with ISI mark with necessary PVC coupling etc.,

Supplying and fixing of suitable PVC endcap (6kg/cm2) for 7" dia borewell of best quality with ISI mark

Supply and delivery Of 3Core copper conductor Flat Cable (2.50Sq.mm) confirming to IS 694/1990 with ISI marking sutiable for Submersible Pumpset etc., Complete

UPVC Pipe 32 mm Dia Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure in residential areas do not normally exceed the maximum tolerance.

Supplying of best and approved quality of Nylon rope of the following size including laying in the bore well and tying with copper wire it etc commplete complying with standard specification.

Supplying and fixing erecting 7.5 HP ISI make bore well SUBMERSIBLE PUMPSET with required accassories for the 7.5HP ISI make3 phase electricmotar 2900rpm , 400/S.S. shaft cable of discharging 100 to 200 LPM against a total Head of 135m to 100m with ISI mark and an outlet of 50mm and suitable for 150mm dia bore well including supplying and fixing M.S. fabricated wall mounting Pannel board with internal wiring as per I.E. rules and necessary locking arrangements with suitable cutler and hammer type bush button automatic 10 HP texvel DOL starter - 1 no, suitable 15 Amp, TPIC switch, 0 to 500 v Voltmeter, 0 to 20 Amps Ammeeter, single phase preventer. pilot lamps with 3 bulps to indicate power supply and 50mm dia GI couplying - 2 nos, M. S. clamps - 2 nos, 2.5 Sq mm wire 3 core copper flat submergible cable, including Conveyance and Erection charges including required G. I. pecials, MR Tape Electrical connection charges., delivery pipe connection charges and other plumbing works including hire charges for Chain pully, tripod and other tools and trial run for three days etc., including labour charges complete complying as directed by the departmental officers.

Supplying and fixing wall mounting of Panel board with following accessories a.Suitable DOL type push botton automatic starter etc., complete.

Supplying and erecting 2H.P monoblock with ISI mark with necessary accessories (motor should be got approved by Executive Engineer before use onworks) complete complying with standard specification.

Supplying and fixing of PVC ready made HDPE water storage tanks having 1000 litre capacity made of PVC matertials including necessary provision for conveying, jointing delivery line etc.

Supplying and erecting in position of 500 lit capacity capacity Industrial Model Reverse Osmosis Water-cum- Purifier to deliver Potable Water with World Health Organisation WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No.Low Pressure Switch - 1 No.,Level Switch - 1 No. &Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact

Providing and fabricating of powder Coating finish Food kiosk of SIZE:3m X 3 m X2.4 m , from the floor level, the frame of the food kiosk is fabricated using mild Steel L-Angles of size 50mm X50mm X6 mm and MS Tubes of size 40 mmX 40mm X0.6 mm thickness. Flooring will be covered with 12 mm wood panels. Providing & fixing of Stainless Steel Sink(450 mm X 450mm X200 mm) including UPVC inlet Pipe with 15 mm PTMT Bib cock and drain of 40 mm dia PVC waste pipe including 75/100 mm dia waste coupling. Providing of Glass Display name board of 8 mm toughened glass of size 600 mm X 600mm.Provision of Cash Counter of size 450mm X450 mm X500 mm with SS top and other panels made up of MS powder coated, including one of working Stainless –Steel Table(grade SS202) of size 120mm X 300mmX900mm, Providing name board cut from ACP (Aluminum Composite panel)Sheet of 3 mm thick for displaying of menu items.etc. complete as directed

Manufacturing, Supplying and Erection in position of Granite Stone Sitting bench of 1500x670x1000 of 100 mm thick jet block granite stone etc., complete complying with standard specifications

Supplying and fixing of Bison Sculpture of Making figure of object from stone,wood and clay materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed

Manufacturing, Supplying and Erection in position of 100 liter twin plastic dustbin with stand ,complete as directed

Supplying and fixing Chain link - 2" x 2" using 10 Gauge Galvanised Iron Wire (of all sizes) and ms angle of size 75x75x6mm of 3.00 meter intervel inculding fixing charges. ,complete as directed

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). ,complete as directed

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). ,complete as directed

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) ,complete as directed

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. ,complete as directed

Providing and laying Neelgiri /Mexican grass turf with earth 50mm to60mm thickness of existing ground prepared with proper level andramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, ,complete as directed

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-incharge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.),complete as directed

Barderplaints (Hemalis patten,Exora, Alamanda, Ujaniva)

Foliage Shrubs ( Clerodendron, Nicodia)

Hedge Plants ( Golden Dhurandha )

Single Trunk Palm (Foxtail Palm)

Multi trunk palm (Areca palm)

Ground Covers ( Panthanus, BlackLilly, Landana purple, Ibiscus, Arali)

Supply and fixing of Swing 2-Seater with Rubber Seat: A-Frame :1 ½” Galvanished ‘B’ class pipe Top Rail : 2” Galvanished ‘C’ Class Pipe Seats : Rubber Chain : 8mm Stainless Steel Chain (Grade-304) Chain : 8mm Stainless Steel Chain (Grade-304) Painting with PU coating Product area: 10’ft * 9’ft Play area :15’ft * 15’ft . The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Spiral Slide Senior FRP: [Component] Ladder :Galvanished ‘B’ Class pipeSlide : FRP Spiral slide BED LEG :Galvanished ‘C’ Class pipe [Measurement] Height :6 ½ ft.FRP thickness 6mm. (Reinforced Polymers in 7 Layers) 450 CSM Matt, 600 Roving mat, Isotolic gel coat with UV pigment. Painting with PU coating Painting with PU coating width :10ft [Required area] Product area: 6’ft * 10’ft Play area :8’ft * 15’ft The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Roller Slide 8ft: Measurement] Height:5ft Width: 2ft Sliding Chute:10ft Roller thickness:3mm PVC Roller with½ inch galvanished pipes. No. of Rollers.46 with multicolours. Painting with PU coating Product area: 21/2’ft * 14’ft Play area:6’ft * 18’ft The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Sea – Saw 2 seater – FRP 24 CPE-128 Height: 20” width:96’’ X 30’’ pa frame:11/2’’ GI pipe,2.5mm thickness, B Class, arm:2”GI pipe, 4mm thickness, C class. Paint:pu coating. FRP seat with 450csm, seat size 15”*14 The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Merry go round – 6 Seater (FRP) Height :3” GI Pipe, 2.5mm thick, b class Seat size:15” X 14”, paint: pu coating. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Horse Rider: [Component] LEG :Galvanished ‘C’ Class pipe Galvanished ‘B’ Class pipe Spring: Mild steel spring horse : FRP with Isotolic gel coat with UV pigment. Painting with PU coating Product area: 3ft*3ft Play area:5ft*5ft [Measurement] Width:3ft. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Duck Merry Go Round: [Measurement] Height:2ft Width:7ft [Component] LEG :3” Galvanished ‘B’ Class pipe Seat :FRP Duck -4Nos. with Isotolic gel coat with UV pigment. Support : 1 ½” Galvanished ‘B’ Class pipe. Painting with PU coating [Wanted area] Product area : Ø 7’ft Play area : Ø 9’ft. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supply and fixing of Jungle Gym: [Component] Galvanished ‘B’ Class pipe painting with PU coating [Required area] Product area :5’ft * 5’ft Play area: 7’ft* 7’ft. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed

Supply and fixing of 8 mt Single bracket GI pole (114.30mm OD x 5.40mm thick x 4500mm length,88.90mm OD x 4.85mm thick x 1500mm length, 76.10mm OD x 3.25mm thick x 1750mm length) with base plate of 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with suitable MS box to house 6A MCB with suitable angle iron frame work, with door and with lock and key arrangements with supply and fixing of 1No 100W LED street light fitting with heat resistant toughened glass with IP 65 Prtection in suitable dia GI pipe (Class 'B') complete with PVC unsheathed Copper leads MS clamps and aluminium painting (Philips / Havels /Crompton/equivalent)

Supply and fixing of coil earth to street light poles with No.8 SWG GI wire of 11.5 meters of length in which 10 meters of total length compressed in to a coil of one metter length (75mm to 100mm dia) connected suitable with hexagonal eath bolt of size 8mm in to 25 mm welded on the pole at one end with a coil position fixed on the earth.

Supply and fixing of Unique concept 10W LED Bollard post top latern in IP 66 to ensure sustainable performance in all sections and aesthetics which keeps the surrounding lively concreting with construction of Masonary pedestal with PVC unsheathed Copper leads MS clamps and aluminium painting (Philips / Havels /Crompton/equivalent)

Supply and laying of 4 X 16 sq mm PVC armoured aluminum LTUG cable in a trench to be excavated at dept of 0.75 mtr putting 0.15 layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 4 X 16 sq mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps

Supply and fixing of brass cable gland for 2 X 16 sq mm PVC armoured LTUG cable with earth connection

Design, Supply, Testing and commissioning of 16m Highimast lighting unit (Philips/ Bajaj make or ISI equivalent) complete with hot dip galvanized and suitable for 45met/sec wind velocity and above. The Highmast structure should have head frame, single ring and provided with galvanized lantern carriage suitable for 1 x 8 Nos of 150W LED luminaries with manual ladder arrangement and feeder pillar Box with Automatic timer system including wiring etc: complete as specified in the relevent ISS. Erection of the High Mast by providing concreting 1:2:4 mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30cms above the ground level. The feeder pillar box may be mounted in RCC pedestal with projection of 30cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T/M2 at 1.5m depth of below round level and necessary galvanized foundation bolts nuts washers and Anchor plate & Template etc: Complete as per standard specification of IS-875-1987.Supply and fixing of specially Heavy type water proof, Dust proof integral luminaries fitting provided with 150Watts LED High lumen Flood light fitting (Philips/Wipro or Equivalent) with control switch gears, Allas coated reflectors, with cable connection etc complete as per standard specification along with the supply & fixing of hot dip galvanized lightening arrester and necessary accessories etc: complete as per standard specification.Supply Erection and commissioning of 0.90m x 0.45m x 1.20m floor mounting feeder pillar box and sufficient numbers of ventilation opening should be provide & supporting M.S angle frame with 63A main switch 1no, 63A fuse unit 3 Nos and 63A power contactor with automatic timer arrangment. The feeder pilllar box should be painted with red oxide and two coat of anit corrosive enamel paint including all other allied material etc and supply and fixing of aviation lamp fitting with base and coupling arrangments ect. Complete as per standard specification.

Supply and laying of 31/2 X 25 sq mm PVC armoured aluminum LTUG cable in a trench to be excavated at dept of 0.75 mtr putting 0.15 layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 31/2 X 25 sq mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps

Supply and fixing of brass cable gland for 4 X 16 sq mm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 1/2 X 25 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with GI Flush Mounting box and 6A FT switch in flush with wall with Modular cover Plate (Plastic) and making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm, MS switch box with Modular coverplate along with 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and fixing of 32A DP MCB in flush with wall with earth connection

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube(HigherEnd) complete with Tw round block son wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and run of 1 of No.8 SWG GI wire for earth connection, including cost of all materials etc. all complete in all respects complying with relevant standard specification and as directed by the departmental officer.

Supply and run of 2 of 4 sq.mm .PVC insulated SC unsheathed FRLS copper conductor of 1100 Von 7/20 Gibearer wire for service connection mains

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link(1"x1/8"copperflat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1"thick an either side with painting with suitable bolt and nuts for fixing the TWplank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply & Fixing of Water Tight Bulk Head Fitting suitable for LED Lamp with Guard Heavy Type

Supply & Fixing of 7 / 9 W LED bulb 5.00

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply & Fixing of TNEB Service Connection meter board and Charges

GST at 18%

Please Enable Macros to View BoQ information