PROVISION OF TOILET BLOCKS FOR AGNIVEERS AT VARIOUS CAMPS UNDER GE PANAJI, GOA.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: CHIEF ENGINEER PUNE ZONE

Nature of Work: PROVISION OF TOILET BLOCKS FOR AGNIVEERS AT VARIOUS CAMPS UNDER GE PANAJI, GOA

Contract No: CA NO. CEPZ/MUM/TOKEN-08 OF 2026-27

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category

1 SCH 'A' PART-I To IX Note: This schedule is pre-priced by MES and the rate indicated under Col 5 signifies this fact only

Total amount of Sch 'A' Part-I (Building and Structures) 1 LUMP SUM 52040000 Excess(+) Full Conversion INR

Total amount of Sch 'A' Part-II (Site Clearance, Excavation and Earthwork) 1 LUMP SUM 1313142.4300000002 Excess(+) Full Conversion INR

Total amount of Sch ‘A’ Part III (Internal Water supply) 1 LUMP SUM 1162136.6800000002 Excess(+) Full Conversion INR

Total amount of Sch ‘A’ Part IV (Internal Electric Supply) 1 LUMP SUM 2163421.72 Excess(+) Full Conversion INR

Total amount of Sch ‘A’ Part V (Road, Path and Culverts) 1 LUMP SUM 4423836.438 Excess(+) Full Conversion INR

7 Total amount of Sch ‘A’ Part VI (Sewage Disposal) 1 LUMP SUM 2338258.7600000002 Excess(+) Full Conversion INR

8 Total amount of Sch ‘A’ Part VII (Area Drainage) 1 LUMP SUM 2578631.64 Excess(+) Full Conversion INR

9 Total amount of Sch 'A' Part-VIII (External Water Supply) 1 LUMP SUM 447901.9 Excess(+) Full Conversion INR

Total amount of Sch 'A' Part-IX (External Electric Supply) 1 LUMP SUM 191810.1 Excess(+) Full Conversion INR

11 SCHEDULE 'A' PART-X (MISCELLANEOUS B/R AND E/M WORKS) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 5 signifies this fact only.

M&L for two way Bib taps fancy type chromium plated 15mm dia cast copper alloy with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed 39 Each 0 Excess(+) Full Conversion INR

S&F of Brass Tee (3/4 X 1/2 ) Reducer of 20mm outer dia for CPVC pipe complete all as specified and as direcetd. 50 Each 0 Excess(+) Full Conversion INR

S&F of Lamp holder, PVC/Polycarbonate type with cord grip cap including 9 Watt LED Bulb 230 volt for pendant fittings complete all as specified and as direcetd. 144 Each 0 Excess(+) Full Conversion INR

S&F LED light fitting type with high out put diffuser 4 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as direcetd. 42 Each 0 Excess(+) Full Conversion INR

M&L for two coats of Anti Corrosive paint over one coat of red oxide primer on steel surfacesof any description over 10 cm width or grith including preparation of new surface 514.2 Sqm 0 Excess(+) Full Conversion INR

M&L for cutting through existing bituminous road / hard standing making trench of minimum 100 mm width x 150 mm deep along cross section of road or laying of Gl pipe for encasing electric cable and then repairing. the road /hard standing to match with original finish all as specified and directed. 12 RM 0 Excess(+) Full Conversion INR

M&L for valve chamber of any size, type and construction of brick masonry valve chamber of size 0.60m x0.6m x 0.6m (internal dimension) with 15cm thick foundation using PCC 1:3:6 type C-2 (using 40nim graded stone aggregate) over 15cm thick hardcore, 23cm thick brick wall built in cement and sand mortar (1 :4), 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3 finished even and smooth, without using extra cement, 6mm thick MS sheet cover with, 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type 8-1 (using 20mm graded stone aggregate) coping having rectangular hinged opening of size with locking arrangements & handle made out of 25cm dia MS round bar, hold fasts etc applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surface including excavation and earth wotk in any type of soil and disposal of surplus soil to a distance n.exc 50m complete all as specified. 20 Each Job 0 Excess(+) Full Conversion INR

M&L for making connection by cutting existing GI /CI/DI tubing of size for alternations or additions or fixing of tee as specified and directed. 20 Each Job 0 Excess(+) Full Conversion INR

M&L for HDPE DWC Pipes for laying in trenches for cushioning of cable of sizes -40mmX 32mm all as directed and specified. 816 RM 0 Excess(+) Full Conversion INR

M&L for cutting into existing manholes for connecting new drains of 200mm dia ,making good to pipe and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required. 17 Each Job 0 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information