RandM of Nigams Building at Pachpadra and Kalyanpur under Balotra.

Earth work in exacavation in foundation trenches or drains including dresing of sides and ramming of bottoms, lift up to 1.5 Mtr.. Including taking out the excavated soil and depositing and refilling or jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soil (B-1/1.8)

Providing and laying in position cement cocrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (B-3/3.1.6)

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 CM thick wall in : cement Mortar 1:6: (1 Cement : 6 Sand). ( B-6/6.1.6)

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. Thick walls in: Cement Mortar 1:6 (1- Cement : 6 - sand) Extra over item No. 6.1 & 6.2 for: Wal upto 30cm. And less thickness. (B-6/6.2.6+6.3.4)

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. Thick walls in: Cement Mortar 1:6 (1- Cement : 6 - sand) : Wall above 30cm. (B-6/6.2.6)

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand): flush & Rulled Pointing. (B-12/12.31.1)

Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand): Deep grooved pointing. (B-12/12.31.3)

Plaster on new surface on walls in cement sand moprtar 1:6 including racking of joint etc. complete fine finished: 25 mm thick. (B-12/139/12.3.1)

Plaster on new surface on walls in cement sand moprtar 1:4 including racking of joint etc. complete fine finished: 25 mm thick.(B-12/12.2.1)

Cement concrete flooring grade 1:2:4 (1 - cement : 2 coarse sand : 4 graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of steps etc. complte: 75 mm thick with 20mm thick nominal size aggregate (B-11/11.3.2)

Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge (B-10/10.16)

Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint (B-9/9.17)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : (B-10/10.22)

Providing & fixing precast cement concrete copying 1:2:4 mis 50mm thick complete as per specification : - 50mm - (B-3/3.8)

6 mm thick plaster to ceiling in C M 1:3 (B-12/12.5)

Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.110mm dia (S-3/3.44.2)

Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’Commercial Veneer both side 30 mm thick shutter (B-78/8.13.2.1))

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs. Same Colour (B-12/12.37.2b)

White washing with whiting to give an even shade including all scafforlding: Old work (two or more coats) including scrapping old surface and repairing with whiting where ever necessary.: (B-12/12.34.2)

Colour washing of all shades to give an even shade including all scaffolding: Old work (one or more coats) with whiting with a base coat of white washing including scrapping old surface. (B-12/12.35.3)

Painting with enamel paint of apprived brand and manufacture to give an even shade: One or more coats on old work. (B-12/12.46.2)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). (B-7/7.12)

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). (B-7/7.13)

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 : upto 15 cm thick (B-6/6.18.1)

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) (B-13/13.1)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Light shade using shade cement. (B-11/11.17.1)

Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm (B-13/13.4.1)

Demolishing mud phuska/ Lime dhar/ Kharanja in terracing and disposal of unserviceable material within 50 meters lead. (B-14/14.27)

Providing and laying cement concrete including curing, compaction etc. complete CC 1:3:6 using stone aggregate 20mm nominal size in super structure excl. cost of centering and shuttering. (B-3/3.2.4)

Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. (B-10/10.24)

Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges: Kota stone 25 to 30 mm thick. (B-6/6.17.3)

Half Brick masonry in superstructure with bricks of class designation 75 with nominal hoop reinforcement (2 Nos. 6 mm MS bar) at every 4 th course in for hoop rejnforcement 1 Sqm. 6 mm MS bar 2X2X1.00=4.00 Cement Motar 1:6 Half brick masonary (B-5/5.8.3+5.9)

P&F steel gate grating & grills made of angle, tee, square bar or other flates black pipe with holdfast and fittings completes as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9/9.8)

Supply and fixing chittar or equivalent stone slab perchits with making edges and top surface level in cement mortar 1:3 complete finished Upto 2.15m span Soorsagar or eqvt. White Ashlar (B-6/6.51.1)

P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (I.S. : 2556 Mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor: Size 580x440mm. (S-1/1.2.2)

P & F WVC wsh basin (Ist quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. Pillar cock (I.S. : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make. 25 mm G.I. waste pipe complete including cutting & making good the wall. : Size 550 mm x 400mm (S-1/1.36.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal size (S-2/2.38.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size (S-2/2.38.3)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 15 mm nominal bore size (S-2/2.39.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work) 25 mm nominal bore size (S-2/2.39.3)

P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make. Brass 400 grm. 15 mm nominal bore (S-2/2.7.1)

P & F Stop Cock (IS : 8931 Mark) , superior quality & of approved make: brass 400grm 15 mm nominal bore. (S-2/2.8.1)

P & F Ball Cock ( IS : 1703 Mark) with Rod & P.V.C. Ball complete: Brass wt. 400 gm., 15mm. (S-2/2.11.1)

P & F 15 mm. Dia Connection Pipe of approved quality/make: PVC pipe with C.P. Brass nuts upto length. 450 mm. (S-2/2.13.3)

P & F Flush Cock/Flush Valve (IS: 9758 Mark) for WC of approved quality make: (-do-) Half-turn exposed 25mm nominal bore. (S-2/2.14.7)

P & F Full-way Value (IS: 778 Mark) or wheet valve of approved make. Gun - metal 25 mm nominal bore. (S-2/2.15.3)

P & F Full-way Value (IS: 778 Mark) or wheet valve of approved make. Gun - metal 15 mm nominal bore. (S-2/2.15.1)

P & F UPVC SWR. pipes grade 'B' for sciland wast discharge system (IS :13592-1992 marked) of approved make 75 mm dia (S-3/3.44.1)

P & F UPVC SWR. pipes grade 'B' for sciland wast discharge system (IS :13592-1992 marked) of approved make 110 mm dia (S-3/3.44.2)

P & F UPVC SWR. pipes grade 'B' for sciland wast discharge system (IS :13592-1992 marked) of approved make 100 mm dia Tee with door ( S-3/3.45.17(iii))

P & F UPVC SWR. pipes grade 'B' for sciland wast discharge system (IS :13592-1992 marked) of approved make 110 mm dia bend (S-3/3.45.4(ii))

P & F Square - month gully trap 'A' grade (IS: marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40 mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 x 100 mm, RCC cover with frame, Internal Chamber size 300 x 300mm. (S-3/3.5.1)

Construction of manhole in all type of soil inner size 90x60 cm. thick masonary in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring making channels, 80mm thick stone slab covering with 40 mm thick M-15 grade C.C. flooring, RCC cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50mtr. lead. Depth up to 0.5 M (S-3/3.19.1)

Construction of soakage well in all type of soil 300mm thick dry masonry, top and bottom 300mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40mm thick M-15 grade C.C. flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr. : Size 240 cm. dia outside & 240 Cm. Depth. (S-3/3.22.3)

P&F looking mirror of PVC frame of appd make ( Atul or eq ) size 500x400 mm (S-1/1.45.1 )

P&F towel rail or ring of appd quality or make Cp brass towel rail with bracket 600X20 mm heavy duty. (S-1/ 1.47.4)

Providing and Fixing Spun –Cast Iron floor trap (Nahani) of (IS :3989 Mark ) approved quality / make with socket down or hinged grating including cutting and making good the floor :- Size 100X75 mm. (S-3/3.42.2)

P & F PVC Storege Tank (IS : 12701 marked indicating the BIS license No.), of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 ltr. capacity (S-2/2.26.3)

Wiring of ligh point/fan point/exhaust fan point/call bell point with 1.5 sq.mm nmninal size FR PVC insulated unsheathedstd fiexible copper conductor 1.1.kv grade and 1.5 mm nmninal size FR PVC insulated unsheathedstd fiexible copper ea

rth conductor 1.1.kv grade (IS:694) of approved make in surface / recessed ISI marked MMS (IS:9537 P-III) PVC conduct & its accessoreis, 18 swg M.S. box with earthing terminal 6A swith 3.0 mm thick phenolic laminated sheet, zinc planted brass screws, cup washers, making connections, testing etc. as required. Group 2 (E020100 ) Short poing (upt 3 mtr.)

Medium point (Upto 6.0 Mtr.)

Long point (Upto to 10.0 Mtr.)

Supplying and drawing FR PVC insulated and unsheathed flexible copper conductor (IS:694) of 1.1 kv grade of approved make in exisisting surface or recessed conduit/casing capping including making connections etc. as required. Group-2 2x2.5 sq.mm +1X1.5 sq mm (E040108)

(B) 2x4.0 sq. mm+1x2.5 sq. mm (E040117)

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required. group-1 6 A to 32 A rating E060112

Providing & Fixing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Double pole isolator 30A / 40A (E-6.2.1.1)

Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing (E17.2.2)

Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR On board (E01.3.1)

Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure 'A' attached with this BSR (E07.37)

S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 25 mm (E1.4.2)

Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating (7.29.1)