RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC) Bid to RA enabled No Shorts - Sports ( 260 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) UTILITY Utility For Sports For Sports SIZE/DIMENSIONS Size Large Small
RequiredMedium
RequiredLarge Side Length with Waist Band 480mm ( Large ) * Waist relaxed width 425mm ( Large ) * Waist Stretched 610mm ( Large ) * Hip 200 mm down from waist 590mm ( Large ) * 1/6 Thigh at crotch 385mm ( Large ) * Front rise including waist band 295mm ( Large ) * Back rise including waist band 415mm ( Large ) * Bottom hem Double needle lock stitched
Requiredmin depth 25mm * Side Pocket opening 180 * In seam 215 ( Large ) * Minimum stitch per inch 9 * MATERIAL Body and other parts 100 % Polyester 100 % Polyester Any other material Blend as per buyer's requirements - * Mass ( gram per square meter ) 120 120.0 Count of Warp 60 * Count of Weft 120 * Mesh Lining Yes Yes Mesh Lining composition 100 % Polyester * Mass of Mesh Lining ( gram per square meter ) 50 50 Mesh Lining - Netting Mesh Nos of Holes on base and bias within 625 square mm 155 * Sewing Thread Polyester
Required( 145 dtex X 3 ) Polyester
Required( 145 dtex X 3 ) Embroidery thread Not Applicable * Width of Elastic band for waist 38mm * Technical requirements of Elastic Band IS 9686 latest IS 9686 latest Draw Cord Polyester * Diameter of Draw Cord 4 * Slide Fastners for opening and Closing of Side Pockets Yes Yes Technical Requirements of IS 14181-2002 latest
Requiredmedium
Requiredclosed end IS 14181-2002 latest
Requiredmedium
Requiredclosed end 2/6 Slide Fastener MANUFACTURING DETAILS Front Two panels joined at crotch * Inseam Five thread overlocked stitched * Mesh lining attached at waist and Leg opening Yes * Mesh lining stitching Stitched with five thread overlock * Lining seams Inverted * Bartack Stitching ( Reinforcement Stitching ) at stress bearing areas Pocket opening
RequiredCentre of Waist Band Seam and bottom hem * Contrast panels attachement Not Applicable * Back parts Two Parts * Waist band stitching Stitched in two rows with chain stitch on the elastic * Tunnel at waist band Two holes stitched to allow the draw cord with insertion free movement * Waist Band Pocket Yes Yes Size and material of Waist Pocket 7 cm X 12 cm
Requiredof Mesh Lining fabric 7 cm X 12 cm
Requiredof Mesh Lining fabric Side Pockets Two Side Pockets with Slide Fastener * COLOUR Colour of Fabric White * Other colour/Print ( Other than colours mentioned above ) - * Sublimation Printing (For 100 % polyester only) Available Available Sublimation colour Any other colour required by buyer's * Other colour for sublimation - * Sublimation Print Finish Gloss * Colourfastness to Light ( IS 2454 ) - Base Fabric 5 * Colourfastness to Washing ( IS/ISO Change in Colour- 4; Staining of Adjacent * 3/6 105-C10
RequiredTest- C (3))- Base Fabric Fabric- 3-4 Colourfastness to Rubbing ( IS 766 )- Base Fabric Dry- 4/Wet- 3 * Colourfastness to perspiration ( IS 971 )- Base Fabric 4 * Colour of Mesh Lining White * Any other colour of Mesh as per buyer's requirements - * Colourfastness to Washing ( IS/ISO 105-C10
RequiredTest- C (3))- Mesh Lining Change in Colour- 4; Staining of Adjacent Fabric- 3-4 * Colourfastness to perspiration ( IS 971 )- Mesh Lining 4 * OTHER REQUIREMENTS Pilling Resistant (after 5 hours Test as per IS 10971 (Part 1))
Requiredmin 4 * Dimensional stability to washing
RequiredShrinkage or Elongation Percentage
Requiredmax ( IS 2977 latest)
Requiredin lengthwise and widthwise direction 2 2 LOGO AND MARKING Logo/Totem Marking As per buyer's requirements As per buyer's requirements Type of Logo Printed Printed Numbers of Logos 1 1 Size
RequiredDesign and Location of Logo as per buyer's requirement - * TEST REPORT Availability of test report from NABL/ILAC accredited or central government lab to prove conformity of products to the specification No No Test Report No - * Test report date (hint:) - * Name of lab - * 4/6 Address of lab - * Test reports to be furnished to buyer on demand
Requiredif claimed to be available Not Applicable * ADVANCE SAMPLE Agree to provide Advance Sample(s) for buyer's approval before commencement of supply Yes Yes * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
