REPAIR / REPLACEMENT OF SHEETING, PLUMBING AND SANITARY APPLIANCES IN PERMANENT BUILDING AT AF STATION CARNICOBAR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

All as per item No 3.00 above but fixing only. Note : Coloured Pre-coated / Pre-painted Galvalume aluminium items shall be reused as obtained serviceable from item No 2.00

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

M&L for MS work as in Wind Tie in roof and MS structural works in trusses,etc with screwed ends including nuts,washers and mild steel plates for walls, chimneys,roofs arches etc any kind rods and straining bolts conforming toFe 410-0 or Fe 310-0 complete all as specified .

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level)

Dismantling floor, hearth or wall tilling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM 1:6 complete all as specified and as directed.

Renewing of glazed tiles in patches as in floor /wall area n.exc 5 sqm including removing and cleaning old tiles , preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and as directed.

S&F non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed in CM 1:6 complete all as specified and as directed.

S&F coloured glazed ceramic tiles of size 350 x 250 x 7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster in cement mortar 1:4 complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10mm thick light shade (square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade, incl 15 mm thick screed bed in CM (1:6) complete all as specifeid and directed.

M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course complete all as specified and directed.

M&L 20 mm thick granite (of any type) machine cut in wall/Pillar laid over cement slurry and pointed with admixture of pigment to match the shade of granite stone including grinding and polishing incl 15mm thick cement screed in CM(1:4) laid and jointed in neat cement slurry with pigment to match the colour of stone complete.

M&L rounding to edges of stone slabs one edge such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M & L for dismantling water tanks exc 250 but not exc 500 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge

M & L for dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distempering over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of antifungal acrylic emulsion paint over a coat of acrylic emulsion primer complete all as specified and as directed

Taking up or down steel water tubing and connection 15 mm dia complete all as specified and as directed.

Taking up or down steel water tubing and connection 20 mm dia complete all as specified and as directed.

S&F steel tubes, medium grade 15mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F steel tubes, medium grade 20mm bore galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Refixing 15 mm old steel tubing and connections in new or old position (walls,ceiling,floors, etc.) complete all as specified and as directed.

Refixing 20mm old steel tubing and connections in new or old position (walls,ceiling,floors, etc.) complete all as specified and as directed.

S&F in repair vitreous china squatting 'Orisa' pattern, size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) complete trap, connection to drain, flushing pipe, complete all as specified and directed

S&F in repair European type WC (Pedestal pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed

S&F PVC 10 ltr flushing cistern valveless, syphonic action type, low level , white ,with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F concealed angle cock 15mm bore, fancy type, chromium plated, with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed

Supply only CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP fancy type pillar taps suitable for 15mm dia pipe, cast copper alloy, with capstan heads,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair CP fancy type stop valves suitable for 15mm dia pipe, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs CP shower roses 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed complete all as specified and as directed.

S&F in repair CP fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F PVC 10 ltr flushing cistern valveless, syphonic action type, low level , white ,with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair PVC Connections 15mm size 600mm long with PTMT nuts complete all as specified and as directed.

S&F in repair Waste coupling 32mm bore for wash hand basin cast copper alloy complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia 90cm long for WHB complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia with 40mm dia reducer, 90cm long for urinal outlet with 4 Nos screws for fixing pipes complete all as specified and as directed.

S&F in repair SS grating 110mm dia with waste pipe hole complete all as specified and as directed.

S&F in repair SS grating 75mm dia with waste pipe hole complete all as specified and as directed.

S&F in repair SS grating 110mm dia without waste pipe hole complete all as specified and as directed.

S&F in repair SS grating 75mm dia without waste pipe hole complete all as specified and as directed.

S&F in repair SS soap dish (fancy type) approximated size 160 x 160 x 90 mm complete as specified and directed.

S&F in repairs, towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms)

S & F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete.

S&F in repair glass shelf assembly Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms).

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 100 mm, set in cement mortar complete all as specified and directed..

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed in trenches or in floors, 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T) 110mm bore branch piece (equal or un equal) with access doors.

M&L PVC (SWR) floor trap 75mm outlet dia with grating including jointing with solvent cement complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including preparation of steel surfaces complete.

M&L applying one coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation of steel surfaces complete.

ASHOK BISWAS

Kakolil Trade Agencies

KML CONSTRUCTION

RADHA GOVIND CONSTRUCTION

bansal construction