Construction work of link road from Jakhora Nanura Kisalwans road to Vinaika Natrai

Construction of embankment with approved material obtained from local pits with a lift up to 1.50 m, transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300.1 and 300.2 with a lead up to 1000 m as per Technical Specification Clause 301.5 (Excluding GST)

Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Excluding GST)

Providing, laying and spreading material on a prepared sub grade. adiing cement @ 2 % by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. (Excluding GST)

Providing, laying and spreading matearial on a prepared sub base, cement @ 4% by weight to the spread material manually mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strenght and to form a layer of sub bass. (Excluding GST)

Providing and applying tack coat with bitumen VG-10 using bitumen distributor @ 0.30 kg / sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MORD technical specification clause 503 (Excluding GST)

Providing and laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Seal coat of Type C as per MORD Technical Specification Clause 508. (Excluding GST)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grede and cross fall using Type C as per Technical Specification MORD sepecification no. Clause 510. as per Data Book item No. 5.12 (B) Case - III TypeC (Excluding GST)

Brick edging on both sides of the road of first class bricks 8 cm (3") wide and 12 cm 4.5" deeps laid with mud mortar including labour and supply of bricks finished to required template and proper alignment and also including dressing and ramming the excavated earth as directed by E-in-C. (Excluding GST)

Excavation in foundation in soil requring the use of special tools and plant such as pickaxes/sabbals etc. including lift up to 1.5m and lead up to 50m as (Excluding GST)

Sand/Stone dust Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 (Excluding GST)