Construction of New Boys Hostel Building (G plus 1) for Paradip College(Revised Tender)

Amount

Providing 300mm dia Single under reamed RCC (1:1.5:3) (Bored Compaction) Pile of 9m length from cut off level including welding of cages, boring through all strata from existing ground level with removal of obstruction if any, using bentonite, providing required reinforcement 6 nos main bar @12mm dia and 60 nos ring @8 mm dia properly welded to the main bars , welded properly and disposing the boring earth out from the work site, including supply of all labour, materials, taxes, tollage, royalties, transportation, T&P etc complete exlcuding GST and as per direction of Engineer in charge.(excluding cost of Reinforcement) (Payment shall be made from cut off level).

Cutting of pile heads upto 0.30m from cut off level and disposing the debrises clear out of the work site with supply of all labour, T&P etc. complete excluding GST and as directed by Engineer in charge.

Initial load Test for Pile including kenteledge of required load and supply of all testing equiments including construction of test pile cap and sismantling the same after completion of test and submitting the test report as per ISI-2911(PT-IV) with supply of all labour, materials, taxes, tollage, royalties, transportation, T&P etc complete exlcuding GST and as per direction of Engineer in charge.

Routine load test for working pile including kenteledge of required load and supply of all testing equiments including construction of test pile cap and sismantling the same after completion of test and submitting the test report as per ISI-2911(PT-IV) with supply of all labour, materials, taxes, tollage, royalties, transportation, T&P etc complete exlcuding GST and as per direction of Engineer in charge.

Earth work in excavation in all kinds of soil with initial lead & lift with dressing, leveling & compacting the foundation bed, breaking the clods to maximum 5cm to 7cm, disposing the material at a designated place and keeping the required quantities for back filling with cost of labour, T&P, tollage,transportation, loading at one end & unloading at other end, all taxes, excluding GST all complete as per the direction of Engineer-in-charge.

Back filling the excavated material in low laying are using the excavated material with all lead & lift with dressing, leveling & compacting the material around the structure, breaking the clods to maximum 5cm to 7cm laying in layer not exceeding 0.30m. with cost of labour, T&P, tollage, taxes,compacting the same all complete as per the direction of Engineer-in-charge but excluding GST.

Supplying and filling of saline sand including transportation by private trucks/dumpers within 5km lead with covering at the top to prevent blowing out / spillage of sand including loading at one end and unloading at the other end, spreading in layers, levelling, watering, compacting with supply of all labour, T&P, all taxes, royalties, VAT but excluding GST etc. barricading the site if required, all complete as directed by Engineer-in-charge. NB: 10% voids shall be deducted from the measurement quantity of sand after compaction to arrive at the payable quantity.

P.C.C(1:3:6) of using 20mm. & down C.B.H.G chips of approved quality in foundation & plinth including mixing, hosting, laying to proper level & slope consolidating, curing, watering charges, finishing smooth to the exposed surface with including cost & supply of all materials, labour, Transportation, T&P, all taxes, excluding GST etc all complete as directed by Engineer-in-charge.

P.C.C(1:2:4) of using 20mm. & down C.B.H.G chips of approved quality in foundation & plinth including mixing, hosting, laying to proper level & slope consolidating, curing, watering charges, finishing smooth to the exposed surface with including cost & supply of all materials, labour, Transportation, T&P, all taxes, excluding GST etc all complete as directed by Engineer-in-charge.

Providing reinforced cement concrete with C:C (1:1.5:3) (1cement: 1.5 coarse sand: 3 hard granite crusher broken chips ) using 12mm and down hard black granite chips of approved quality for constructioin of RCC drain, culverts, including mixing in mixture machine, hoisting, laying, consolidating with Needle vibrator of appropriate capacity, curring, maintaining proper level and slope, finished smooth to the exposed surface, providing PVC pipes of 100mm dia and required length on walls for keeping weep holes position as directed etc. including cost of testing complete with supply of all materials (but excluding cost of binding wire, cost of steel, labour charges bending and binding of steel and cost of form work) labour, T&P, all taxes, tollage, royalties, VAT but excluding GST etc. barricading the site if required, all complete as directed by Engineer-in-charge.

Supplying of Fe 500 steel confirming to IS 1786 of TATA/ SAIL/RINL brands including cutting, straightening, bending, binding and placing the grills in position for RCC works including cost binding wire of 18 to 20 guage with supply of all materials, labour, transportation, T&P, (taxes if any excluding GST, tollage etc barricading the site if required, all complete as directed by Engineer-in-charge (No wastage shall be paid) N.B:- Payment shall be made as per co-efficient laid down in IS-1786

Providing Rigid smooth leak proof good quality centering and shuttering for RCC works with form works made out of new ply / steel shutters, providing opening on walls as per requirments, maintaining proper alignment etc. in both horizontal and vertical plane, chipping and coaltarring after each use of shuttering materials, dismantaling the same after stripping off period including supply of all materials ,labour ,T&P, tollage , all taxes but excluding GST etc. barricading the site if required, all complete as directed by Engineer-in-charge.

Foundation

Coulmn & Beam (G.F)

Coulmn & Beam (F.F)

Coulmn & Beam (S.F)

Lintel & Chhajja (G.F)

Lintel & Chhajja (F.F)

Lintel & Chhajja (S.F)

Roof slab (G.F)

Roof slab (F.F)

Roof slab (S.F)

Wall (S.F)

Brick work with flyash brick having crushing strength not less than 75kg/CM2 in cement mortar(1:6) inclduing splay/cutting, racking out the joints, curing, hoisting, stagiing, at any height with cost and supply of all materials, labour, T & P, taxes, royalties, transportation charges, curing, testing charges but excluding GST etc. all complete as per direction of Engineering-in-charge

For F&P

For Superstructure (G.F).

For Superstructure (F.F.)

For Superstructure (S.F.)

Cement plaster of following proportion, over brick & R.C.C. surface finished smooth to the exposed surface, rounding the corners providing grooves,beading,raincuts, wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, safety arrangements but .excluding GST etc. all complete as per direction of Engineer-in-charge

12mm. Cement plaster 1:6 (G.F)

12mm. Cement plaster 1:6 (F.F)

12mm. Cement plaster 1:6 (S.F)

16mm. Cement plaster in CM(1:6) (G.F)

16mm. Cement plaster in CM(1:6) (F.F)

16mm. Cement plaster in CM(1:6) (S.F)

6mm. Cement plaster in CM(1:4) (G.F)

6mm. Cement plaster in CM(1:4) (F.F)

6mm. Cement plaster in CM(1:4) (S.F)

Cement Punning over plastered surafce finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc.excluding cost of GST complete & as per direction of Engineer-in-charge

Painting two coats with plastic emulsion of approved quality & shade a coat of primer over putty surface, at any floors and any height with applying the paint uniformly including cost of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, but excluding GST etc all complete and as per direction of Engineer-in-charge.

Painting two coats using 1st quality Weather Coat Paint over the wall surface over a coat of primer of approved quality & shade having resistance to Fungus, moisture, Fading including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding but excluding GST etc all complete and as directed by the Engineer-in-charge.

40mm thick graded concrete with C.C(1:2:4) by using h.g chips of 12mm and down grade of approved quality and additing 2% W.P.C (plastocrete plus) or its equivalent ,chipping the roof surface & preparing the surface before concrete work, laying concerete , compacting properly etc all complete and supply of all materials, labour T&P, taxes royalties, curing, supplying fitting fixing of rain water pipe of approved length, chcken mesh where necessary excluding cost of GST Complete as per direction of Engineer in-charge.

Providing AS flooring of 40mm (avg.) thick, finished smooth to the exposed surface with C.C(1:2:4) by using C.B.H.G chips of 12 mm and down grade of approved quality laid to proper level and slope including finishing the top of the flooring with a coat of neat cement punning rounding the corner where necessary, curing with supply of all materials, labour T&P, taxes royalties, curing, supplying fitting fixing of rain water pipe of approved length, as per requirment excluding GST etc all complete as per direction of Engineer in-charge.

Providing and laying ceramic glazed floor tile of size 300mmx300mm (thickness to be specified by manufacturer)of 1st quaity confirming to IS:15622 of approved make in colours such as white, Ivory, grey, Fume, red, brown laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including jointing the joints with white cement & matching pigment, curing watering etc all complete as per direction of EIC (Excluding cost of GST)

Providing and fixing of 1st quality ceramic glazed wall tiles of approved size350x450mm (thickness to be specified by manufacturer) confirming to IS:15622 of approved make in all colours shades except burugundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dadoos over 12mm thick cement mortar 1:3 (1cement : 3 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade, curing watering etc all complete as per direction of EIC (Excluding cost of GST)

Supplying, fitting, fixing full body vitrified tile of size 605mm. x 605mm of approved quality brand, shade laying over a base course of CM(1:1) of required thickness and cement slurry including cutting to size, filling the joints with tile grouts of appropriate shade laid to proper slope & level cleaning the top surface with cost and supply of all materials, labour all wastages, mending good to the damages T&P, taxes, curing, transportation,staging charges but excluding GST etc all complete as per the direction of Engineer-in-charge.

Supplying, fabricating and fixing of stainless steel of 304 grade in hand railing using 50mm. dia of 2mm. thick circular pipe with fabricating of 2 mm thick circular pipe with newel posts of 75mm Øx 900 mm height balustrade of size 32mm. dia x 2mm thick @ 0.90mtr. C/C and pipe bracing of size 32mm. dia. x 2mm thick in 3 rows at stair case and other required places as per approved design & specification, muffing, polishing, etc. with cost of conveyance, all materials, labour, T&P, taxes etc.excluding cost of GST all complete as per direction of Engineer-in-charge.

Providing and applying termite treatment to soil under floors at the junction of floors and walls, drilling 12mm holes vertically at 300mm interval to reach the soil below and injecting squirted chemical emulsion into these hole using a hand operated pressure pump sealing the holes with white cement. The existing wood work in the building in contact with floor and walls which is infected by termites will be treated by spraying chemical emulsion at the point of contact with adjoining masonary by drilling 6mm hole at the chowkaths at an angle about 45 0 at the joint of wood work including all cost of insecticide, labour, transportation. taxes, staging, scaffolding but excluding GSTetc all complete as per the direction of engineer in charge. NB 1. This is a onetime treatment, if required it should be increased as per the requirement for effective control without any extra cost. 2. The warranty period for the above work is 02(Two) years. 3. The measurement will be taken as per the covered area in sqm.

Factory made FRP Door frames of 75mm. x 100mm. or 70mm. x 120mm. size shall be fabricated using E-Glass Chopped Strand Mat (CSM), U.V. stabilized Isopthalic Gelcoat & impregnated with Isopthalic resin. The thickness of the FRP skin shall not be less than 2.0mm. The Door frame will consist of three segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in & with joined together by means of screws. The FRP frame shall be provided with wooden reinforcement of 6 locations for high screw holding capacity for fixing metallic hold fast & shall be consolidated by filling with plaster of pairs with fibre reinforcement with supply of all materials, labour, T&P , safety arrangements for labours, Port entry fee, taxes excluding GST etc., transportation, etc. all complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing of dressed seasoned Salwood frames / chaukath for doors/ windows / ventilators etc coaltaring two coats to wall side face of frames, fixing to position with requires size of W.I. Clapms of size 250mmx40mmx4mm size grouting with C.C (1:3:6) including cutting groves in walls & fixing to proper position and making good the damages including cutting grooves in chaukaths and jointing with adhessive solution including cost, and supply of all labour, materials, scaffolding staging transportation, T&P, taxes etc all complete as directed by EIC (Excluding cost of GST)

Supplying, fitting, fixing fully glazed sliding aluminum window/ventilator shutters with anodized aluminum section of 63mm. x 37mm. x 1.50mm. thick as per approved design fixing with 5.5mm. thick plain/frosted/coloured glass panes providing rubber beading, aluminum U channels, angle, clips, required nos. of handles, tower bolts, hooks as per relevant IS specification, all finished including cost & supply of all materials, labour, T&P, taxes, transportation charges, staging, scaffolding, etc. complete and as per direction of Engineer-in-charge. (Excluding cost of GST)

Supplying, fitting, fixing aluminum grill of approved quality for window/ventilator shutters providing rubber beading, aluminum U channels, angle, clips, etc. all complete including cost & supply of all materials, labour, T&P, with cost & safety arrangements for labours, Port entry fee supply of all materials, labour, T&P, taxes excluding GST taxes, transportation charges, staging, scaffolding, etc. complete and as per direction of Engineer-in-charge.

Factory made single/double leaf rigid FRP sand which composite door shutter of 28mm./1 mm. thick laminated with two FRP skin with wood grain finish fabricated using U.V. stabilized Isopthalic Gelcoat and one layer of 450 GSM E-Glass chopped Strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins will not be less than 1.5mm. Expanded Polystyrene (EPS) structural form panel of 29mm. thickness and a density of 20 Kg./Cu. Mtr shall be used as core material. Wooden reinforcement made of seasoned Sal wood blocks of cross section not less than 27mm. x 38mm. and also necessary Sal wood reinforcement for fixing the metal fitting such as tower bolts, aldrops, handles etc. shall be provide. A material, the Sal wood reinforcement & the skins. with supply of all materials, labour, T&P , safety arrangements for labours, Port entry fee, taxes excluding GST etc., transportation, etc. all complete as per direction of Engineer-in-charge

Supplying,fitting, fixing in position 32mm thick piasal wood panneled shutters for doors windows & ventilators with aluminium fittings, aluminum aldrops, aluminum tower bolts, aluminum handles, aluminum hinges, wooden hinged cleats, sand blocks, cutting grooves in chaukath, mending good the damages etc all complete including supply of all materials, T&P, labour, tollages etc as per direction of EIC for all floors (Excluding cost of GST)

Supplying fitting and fixing 32mm WPC door and window shutter with supply of all materials, labour, T&P , safety arrangements for labours, Port entry fee, taxes excluding GST etc., transportation, etc. all complete as per direction of Engineer-in-charge

Supplying,Fabricating,fitting fixing of MS Grill,made of solid Square bar /MS Flat/MS Angle/MS Channel etc.fixing position with screws,clamps,nails including grouting if required with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges, grinding, staging, scaffolding, finishing the joints & exposed surfaces curing but excluding GST etc all complete as directed by the Engineer-in-charge

Painting two coats of Enamel paint of approved quality shade over a coat of primer, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. excluding cost of GST complete and as per direction of Engineer-in-charge

Painting two coats of of approved quality Enamel paint shade over a coat of primer, over wood work applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. excluding cost of GST complete and as per direction of Engineer-in-charge

Reinforced Cement concrete (1 cement:1.5 Coarse sand :3 chips) using 12mm to 20mm size C.B.H.G chips of approved quality with 2% WPC for all floors, foundation & plinth etc. of including mixing in a mixer machine, hoisting, laying in proper level, consolidating by mechanical vibrator, finished smooth to the form work and exposed surface, curing, water charges, including cost of materials, labour, Transportation, all testing, engagement & hire charges of all mechaniries, T & P, tollage, royalities, all taxes excluding GST etc. all complete but excluding cost of reinforcement, formwork and bending/binding charges as directed by Engineer-in-charge.

Dewatering the water by engaging pump of 5HP capacity with sufficient long suction & delivery pipes including engagement hire & running charges, operator expenses, fuel charges of the pumps,including transportation charges, incidental expenses required for the work if any with supply of all labour, taxes, T&P , excluding GST etc. all complete as directed by Engineer-in-charge. N.B:- No idle hours shall be paid payment shall be made as per the jointly signed Log Sheets maintained by the Contractor in daily basis.

Supplying & fitting and fixing of following PH materials of good quality with ISI mark with all transportation loading & unloading at both ends with all taxes, tolage, royalty etc all complete as direction of EIC (Excluding cost of GST)

Porcelain hand wash basin (Parryware / Hindware / Johnson) (16" x 22")

Porcelain hand wash basin with pedestal (Parryware / Hindware / Johnson) (16" x 22")

15mm dia CP pillarcock wt 450gm (Piaza/Amber)

32mm CP wate

40mm CP wate

50mm CP waste

32mm PVC waste pipe

40mm PVC waste pipe

50mm PVC waste pipe

15mm Brass stop cock (Wt 450gm)

20mm Brass stop cock (Wt 450gm)

15mm connection pipe (PVC/CP)

Steel Kitchen Sink (24 x 18 x 8Cm) (TATA / Jindal)

4 to 5 mmthick bevelleged plate glass mirror 24" x 18" size with masonite board and mirror screw

50mm G.M.F.W.V (Heavy duty)

40mm G.M.F.W.V (Heavy duty)

25mm G.M.F.W.V (Heavy duty)

20mm G.M.F.W.V (Heavy duty)

15mm G.M.F.W.V (Heavy duty)

10 ltr capacity PVC low level cistern(Slimline)

Soap holder

100mm dia shower

20mm dia 60cm cp long towel rail

Cp glass self (600 x 125) with Glass

CP self(20'' x 5")

150mm /100mm dia C.I/C.P gratings

15mm dia C.P stopcock (Amber/Piaza)

20mm dia C.P stopcock (Amber/Piaza)

15mm long body C.P bibcock wt 400gm (Piaza/Amber)

15mm C.P bibcock wt 400gm (Piaza/Amber)

15mm dia PVC bibcock (Prayag)

C.P towel ring

Health Faucet (Jaguar/Hindware/Johnson)

C.P two way bib cock (Jaguar/Hindware/Johnson)

25mm GI tank nipple

CP extension piece

OWC eith footrest / IWC with footrest

Commode (P-trap/S-trap) EWC/AWC with cover (parryware/Hindware/Johmson)

Commode sheet cover and clamp (Parryware / Hindware / Johnson)

Commode with cistern (Hindware/Johnson/Parryware)

1" PVC ball valve

3/4" PVC ball valve

1 1/2" PVC ball Valve

75mm CP round grating

100mm cp round grating

100mm x 100mm square grating

Supplying all materials, labour, T&P, all taxes for fitting and fixing of approved make as per specefication, etc all complete as per direction of EIC (Excluding cost of GST)

100mm dia PVC Pipe

75mm dia PVC Pipe

100mm dia PVC P/S P-Trap

100mm dia PVC dor bend

100mm dia PVC plain bend

100mm dia PVC cowl

75mm dia PVC cowl

100mm dia PVC offset

75mm dia PVC offset

100mm dia S/J with door

100mm dia D/J with door

15mm dia CPVC pipe including fittings 80 sch

20mm dia CPVC pipe including fittings

25mm dia CPVC pipe including fittings

40mm dia UPVC pipe including fittings 80 sch

50mm dia UPVC pipe including fittings 80 sch

100mm PVC socket

PVC clamp

40mm dia UPVC elbow

40mm dia UPVC Tee

40mm dia UPVC bend

50mm dia UPVC elbow

50mm dia UPVC Tee

Elbow for CPVC 15mm dia

Elbow for CPVC 20mm dia

Elbow for CPVC 25mm dia

Tee for CPVC 15mm dia

Tee for CPVC 20mm dia

Tee for CPVC 25mm dia

Brass elbow for CPVC pipe 15mm dia

Brass elbow for CPVC pipe 20mm dia

Brass elbow for CPVC pipe 25mm dia

Brass Tee for CPVC pipe 15mm dia

Brass Tee for CPVC pipe 20mm dia

Brass Tee for CPVC pipe 25mm dia

Supplying, fitting and fixing of following PVC grey pipes of type-B schedule conforming to IS-13592 and fittings conforming to IS-14735 for water supply & sanitary works with supply all labour, material, T&P, transportation, taxes, staging, scaffolding etc.excluding cost of GST all complete as per direction of Engineer-in-charge.

110 dia Rain Water Pipe

Supplying of all labour, material, T&P including all taxes, tollages, royalty & construction of Manhole Chamber, earthwork of excavation in all kinds of soil, backfilling the same after work done, with CC (1:3:6) using 40mm & down graded CB metal of approved quality over the bed of 0.25M thick, KB brick work having crushing strength not less than 75kg/sqcm to 99kg/Sqcm, RCC cover slab with CC(1:2;4) using 20mm and down CB chips of approved quality including bending, binding of Tor steel with binding wire 18 to 20 gauge and centering and shuttering, CP (1:3) of 12 mm thick to outside and inside and neat cement punning to the outside surface wall and flooring, curing etc all complete as per direction of EIC as per approved specification and design size (1200 x 1200 x 900mm) excluding cost of GST

Supplying of all labour, material, T&P including all taxes, tollages, royalty & construction of Greese Chamber, earthwork of excavation in all kinds of soil, backfilling the same after work done, with CC (1:3:6) using 40mm & down graded CB metal of approved quality over the bed of 0.25M thick, KB brick work having crushing strength not less than 75kg/sqcm to 99kg/Sqcm, RCC cover slab with CC(1:2;4) using 20mm and down CB chips of approved quality including bending, binding of Tor steel with binding wire 18 to 20 gauge and centering and shuttering, CP (1:3) of 12 mm thick to outside and inside and neat cement punning to the outside surface wall and flooring, curing etc all complete as per direction of EIC as per approved specification and design size (600 x 450 x 1200mm) excluding cost of GST

Supplying of all labour, material, T&P including all taxes, tollages, royalty & construction of inspection chamber, earthwork of excavation in all kinds of soil, backfilling the same after work done, with CC (1:3:6) using 40mm & down graded CB metal of approved quality over the bed of 0.25M thick, KB brick work having crushing strength not less than 75kg/sqcm to 99kg/Sqcm, RCC cover slab with CC(1:2;4) using 20mm and down CB chips of approved quality including bending, binding of Tor steel with binding wire 10 to 20 gauge and centering and shuttering, CP (1:3) of 12 mm thick to outside and inside and neat cement punning to the outside surface wall and flooring, curing etc all complete as per direction of EIC as per approved specification and design size (762 x 762 x 457mm) excluding cost of GST

Construction of Soak Pit 1.20x1.20x1.20Mtr filled with brickbats including S.W. drain pipe 100mm dia and 1.20M long complete as per direction of EIC (excluding cost of GST)

P.S. Construction

SUBRAT KUMAR BEHURA

Naresh Chandra Bhatta

NNS CONSTRUCTIONS AND ENGINEERING PRIVATE LIMITED