REPAIR AND MAINT OF INTERNAL WIRING EM FITTING AND FIXTURES OF OTM ACCN AT ZONE II UNDER JURISDICTION OF GE ARMY JAISALMER

Amount

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including PVC Casing Capping and conduit, fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surface of walls,floors etc all as directed.

Taking down old point wiring from existing concealed conduit including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surface of walls,floors etc all as directed.

Taking down of old unsv submain wiring of anytype any size complete all as specifie d and directed with casing capping / surface conduit

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down submain wiring any type any size from existing conduit complete all as specifie d and directed

Taking down light fitting any type any watt complete all as specified and directed

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and inciuding medium grade, PVC casing caping and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box of 1.8 mm thick and 60 mm deep (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for One light or fan point, controlled by one, one way switch 5 Amps.

All as per Item No 8.00 here-in-before but for one bell/buzzer point controlled by one push botton.

All as per Item No 8.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.

All as per Item No. 8.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.

All as per Item No. 8.00 here-in-before but for one light point controlled by two, 2 way switches.

All as per Item No 8.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified.

M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and existing PVC /Steel Concealed conduit of 20 mm bore with accessories in wall floor etc ISI mark covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-charge for One light or fan point, controlled by one, one way switch 5 Amps.

all as per Item No 20.00 here-in-before but for one bell/buzzer point controlled by one push botton.

all as per Item No 20.00 here-in-before but for one socket out let 3 pin 5 Amps on the same board.

all as per Item No. 20.00 here-in-before but for one socket outlet of 3 pin 5 Amp on independent board.

all as per Item No 20.00 here-in-before but for one socket outlet of 15 Amps fixed on independent board with 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated and 4.0 Sq mm multistranded copper conductor wire FRLS PVC insulated as earth wire complete all as specified and directed by Engineer-in-charge.

S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete specified.

S&F switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as specified.

S&F switch piano, flush type, 5 amps, 230 volts, single pole, two way (ISI marked) complete all as specified

S&F sockets outlet multipurpose 2 in 1, 5 Amps flush type confirming to IS all as specified.

S&F sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type confirming to IS all as specified.

S&F ceiling rose, PVC of size 65 mm x 18 mm two to three terminals (ISI marked) all as specified.

S&F bell push flush type 5 Amps complete all as specified.

S&F stepped type, Socket type, electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specfied

M&L for lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings including taking down unserviceable lamp holder of any description complete all as specified

S&F bell AC single pole Ding Dong type 230 volt all as specified.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 sqmm cable & One run of 4.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

M & L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sqmm (FRLS) in existing concealed/Surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 Sqmm cable & One run of 4.0 Sqmm cable shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sqmm (FRLS) in existing concealed /surface conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 Sqmm cable & One run of 6.0 Sqmm cable shall be paid as one unit length.)

S & F for LED tube light fitting 20 Watt 4 Feet or 1183 MM in lenth, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver , IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 2000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with polycarbonate housingand diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F LED 18 Watt Square surface mounted LED panel. PDC aluminum housing and high translucent frosted plastic diffuser makes it a robust Luminaire. Efficacy 100lm/w complete all as specified Make Orient, Philips, Crompton, Havells etc

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as directed by Engineer-in-Charge. Make Orient, Philips, Crompton, Havells etc

S & F in repair bracket of GI pipe medium grade of 40 mm dia,clamps made of FI 40 mm x 6 mm Incl nuts,bolts & washers,painting complete as specified.

S & F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make: Bajaj Cat part No BGBOS 600 9W LED, Philips Cat Part No BCP 150 LED 150 WW or its equavalent in Wipro.

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj Cat part No BGCL 40 W LED WH or its equavalent in Philips, Wipro.

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified and as directed

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed.

S & F for sheet metal enclosure MCB SPN DB way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed of following Size.

(a) SPN DB 8 way

(b) SPN DB 6 way

(c) SPN DB 4 way

(d) SPN DB 2 way

S & F MCCB TPN 415 volts 25 KA suitable for fixing on VTPN DB of capacity 63 to 100 Amps with extended terminals complete all as specified. Make : Schindier / Legrand / L&T / ABB

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for MCB Single pole and neutral rated capacity 6 to 32 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

S & F for MCB Single pole rated capacity 6 to 32 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schindier/Legrand/L&T/ ABB

M & L for bore earthing not less than 250mm dia 16 feet deep filled with black soil upto 7 feet from bottom complete with galvanised iron pipe 40 mm bore medium grade 3m long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre upto 2.5 m of length from bottom, burried directly in ground filled with 45 cm alternate layer of magnesium sulphate, charcol & salt up to ground level & connected to galvanised iron strip 32 x 6 mm upto 7.5 Mtr above ground level as earthing lead by means of bolt and nut, check nuts and washers of galvanised iron or steel including brazing work upto equipment in including GI strip drawn into GI pipe 40 mm dia light grade up to required as protection pipe top edge of earth electrode to be plugged with GI plug including taking out old earthing complete all as specified.

Rasam Engg Co.

Leelashah Enterprises

KALLA TRADERS AND ENGINEERS

JAI ENGINEERING COMPANY

S.O.S.CONSTRUCTION CO.

M/S RAKESH CHOUDHARY