Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC 128 ALLEN MARKET SADAR KABARI BAZAR MEERUT CANTT 250001 | MEERUT CANTT | MEERUT | UTTAR PRADESH | 250001 | L1 | Accepted-AOC Accepted and admitted being L1 | |
| 2 | L2₹34.2 L+₹2.3 L (7.17%)Rejected-Finance D 249 GREEN ESTATE A2Z BUILDER DEVELOPERS NH 58 ROORKEE ROAD MODIPURAM MEERUT UP 250110 | MEERUT | MEERUT | UP | 250110 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹39.0 L+₹7.1 L (22.1%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North)
GE (North) Meerut Cantt PIN 250001
WELCOME MAINTENANCE TO MD OFFICERS ACCN ALLIED WORKS UNDER AGE BR I AGE EM I OF GE NORTH MEERUT CANTT
2022_MES_527585_2
8335/E8
Open Tender
Civil Works
Item Rate
150 days
Meerut
Class D
Category a i
13 documents required · 13 mandatory
₹500
GE (North)
₹90,000
Yes
17 Aug 2022
9 Jul 2022
1 Aug 2022
9 Jul 2022
30 Jul 2022
16 Jul 2022
Amount
M&L for 25mm thick PCC (1:2:4) type BO, (using 12.5mm graded stone aggregate) sub base as in floor to receive tiles complete all as specified.
M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.
Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 174 of SSR Part-II complete all as specified and directed.
S&F in repairs 75mm, 4 levers, brass lock drawer grade complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium frame for door shutters, windows ventilators with one or more rebates with and including joining cleats for fixing etc complete all as specified and directed.
S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutter fixed type with sash bar aluminium section weighing 0.55 Kg/RM including necessary jointing cleat glazing, clip, handles, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.
S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 150 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note : - (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note : - (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S&F long brass barrel tower bolts,with cast or sheet berrel and rolled or cast bolt length of bolt 200mm with dia of shoot / bolt complete all as specified and directed.
S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed. complete all as specified and directed.
S&F 100mm size butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, Size of hinges complete all as specified and directed.
S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electro galvanised,width of flap (when open) 40 mm. complete all as specified and directed.
S&F 125mm size extruded brass handles, febricated type polished , complete all as specified and directed.
S&F in repairs stainless steel fancy type curtain rod 25mm dia, complete all as specified and directed.
S&F in repair aluminiun (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed. complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.
S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.
S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.
M&L in repairs 18/19 mm thick solid WPC board, exterior grade, prelaminated one side with decorative choice laminatation and other side balancing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edges fancy handle, Magnite lock complete all as specified and directed.
M&L for rounding to edges of stone slabs two edge full round, such as in steps, cooking platform and other similar situation complete all as specified and directed
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".
M & L for light shade vitrified tiles 10mm thick (minimum), (square / rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as on vertical surfaces sch as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the clour of tiles and over and including 10mm thick screed bedding in CM (1:4) complete all as specified and directed".
M & L for light shade vitrified tiles 10mm thick (minimum), (square / rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the clour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed".
M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and and directed
M&L for 18-20 mm thick machine cut mirror polished Granite stone slab PERFECT BLACK table rubbed polished and round edges as in cooking plateform, steps and window cills and like over and including 10mm thick scread bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade / colour / matrix of granite complete all as specified and directed.
Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M & L for applying 15mm thick rendering unsing ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @3% by weight of cement of as per manufacturer instructions, complete all as specified an directed. Note:-Water proofing compound shall be measured and paid sepratly Note Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.
M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.
M&L preparation of complete removal of existing treatment by mechanical means plastered old surface of wall and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion destemper using roller for complete all as specified and directed
M&L for preparing of old decorated surfaces of ceiling including complete removal of existing treatment ( plastered or un plastered ) including cornics etc and applying three coats of white wash using roller using roller complete all as specified and directed
M&L for preparing of old decorated surfaces of ceiling including complete removal of existing treatment ( plastered or un plastered ) including cornics etc and applying two coats of white wash using roller complete all as specified and directed
M&L for preparing of old decorated surfaces of wall including complete removal of existing treatment ( plastered or un plastered ) including cornics etc and applying three coats of white wash using roller complete all as specified and directed
M&L for preparing of old decorated surfaces of wall including complete removal of existing treatment ( plastered or un plastered ) including cornics etc and applying two coats of cement base paint using roller using roller complete all as specified and directed
M&L for preparing of old decorated surfaces of wall including complete removal of existing treatment ( plastered or un plastered ) including cornics etc and applying one coat of cement base paint using roller complete all as specified and directed
M & L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.
M & L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.
M & L Preparation of new plastered surface of ceiling and applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.
M & L Preparation of Complete removal of existing treatmentplastered old surface of wall and applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified & directed.
M& L Preparation of Complete removal of existing treatment by mechanical means plastered old surface of wall and applying 3mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.
M& L Preparation of Complete removal of existing treatment by mechanical means plastered old surface of ceiling and applying 3mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed.
M& L Preparation of old surface of wall and applying 3mm thick wall care putty wherever required to obtain / achieve surface smooth and applying one coat of acrylic smooth exterior paint using roller for painting complete all as specified & directed.
M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint complete all as specified and directed
M&L for 4 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square exc 0.5 sq. m in each pane complete all as specified and directed.
M&L in repairs for 4 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.
Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed
Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed
Supplying and laying of 16mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches and wall complete all as specified and directed
Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches and wall complete all as specified and directed
Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.
S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.
S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs stop valves, 15mm bore dia, cast copper alloy,CP with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F in repairs angular valve, 15mm bore dia, cast copper alloy, CP with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
Supply and fixed in repairs gun metal globe or gate valves, 20mm bore dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
Supplied and fixed in repairs CP towel rack 24" size complete all as specified and directed make Jaquar cat part No 1181 or equivelent in Parko / Gem complete all as specified and directed
S&F in repair virtrous china were EWC combined pattern complete with internal fititngs as specified and directed by Engineer-in-Charge. Make : CERA of Cat Part No S1013123 or equivalent in parryware / Hindware
Supplied and fixed in repairs CP over head shower 100mm dia round shape single flow (ABS Body chrome plated with Gray face plate) with rubit cleanig system Inc connection with wall mixer. Make : CERA(Cat No : F 101540) complete all as specified and directed
Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed. Make : CERA Cat Part No S2040113 (wash hand basin) & S2090106 (Pedestal)
Supplied and fixed in repairs 15mm dia bib cock long thread fancy type,brass CP with wall flange fixed as in repair make-Jaquar Cat part No - CON - CHR - 037KN complete all as specified and directed.
Supplied and fixed in repairs CP toilet paper holder brass CP conforming to the sample kept in the office of Engr-in-Charge complete all as specified and directed.
S&F in repairs towel ring 200mm dia chromum plated fancy type conforming to the sample kept in the office of Engineer-in-Charge.
Supplied and fixed in repairs CP soap dish make-Jaquar cat part No- ACN 1131 complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.
Supplied and fixed 110mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.
Supplied and fixed in repairs UPVC (SWR) bends 110 mm bore complete all as specified and directed
Supplied and fixed in repairs PVC (SWR) 110 mm bore junction, single(single 'T') equal or unequal complete all as specified and directed
Supplied and fixed in repairs UPVC (SWR) floor trap 100mm bore including jointing to waste pipe with cement solvent fixed in cement concrete complete all as specified and directed
Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.
Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.
S&Fin repairs sinks with drainage board made of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs plate rack of stainless steel, sheet 1mm thick for kitchen overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified and directed.
S&F in repairs glass shelf assembly 60 cm long , 5.5 mm thick glass , CP guard and fixed to wooden plug with CP screws and cup washer as specified complete all as specified and directed.
Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.
Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.
Dismantling of cast iron / PVC / RCC drain pipes of 110mm / 75mm jointed in cement mortar and taking out of trenches & clear the debris complete all as specified and directed.
Dismantling structrual / framed steel steel work of any description as in purlin, rafter, grills, grating & doors etc. complete all as specified and directed.
Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.
S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed Make - CERA Cat Part No F8030301
S&F in repairs fancy type brass CP hot and cold wash hand basin mixer 15mm bore screwed down high pressure with long screwed shanks and fly nuts, screwed to iron piep complete all as specified and directed
S&F in repairs PVC Bath cabinet with mirror 18" x 22" x 4.25". Make : commander, Prayag or equivalent
Taking down copper/aluminium point wiring (ligh, fan, bell, socket or power etc.) complete with all accessories like switches, sockets, regulators, ceiling roses, light fittings etc. for taking credit and making good disturbed surfaces, applying distemper / Emulsions matching to the existing colour / quality of walls / floors / ceiling etc complete all as specified and directed.
Taking down carefully all type of sub main wiring any core including batten / conduit and making good to disturbed surface as matching to existing complete all as specified and directed.
M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable in existing PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as directed for One light/fan/bell point wiring controlled by one, one way switch/bell push button.
All as per Srl item No 94 here-in-before but with sunk zinc coated pressed steel terminal boxes suitable for modular fixtures including suitable Modular box, base plate and outer plate all as directed for One light/Fan/Bell point controlled by one, one way modular switch 06 Amps all as directed by Engr-in-charge.
All as per Srl item No 94 here-in-before but One 06 Amps socket outlet point on independent board controlled by one, one way modular switch 06 Amps.
All as per Srl item No 94 here-in-before but One 06 Amps outlet point on same board controlled by one, one way modular switch 06 Amps.
All as per Srl item No 94 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable with earth wire 2.5 sqmm for one 16 Amps socket outlet point on independent board.
S&F in repairs switch piano flush type, 5/6A, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs switch piano flush type,16A, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Bell Push, Flush type, 5/6A, AC, 240V, ISI Marked complete all as specified and directed.
S&F in repairs socket piano flush type, 5/6A, 5pin, AC, 240V ISI Marked complete all as specified and directed.
S&F in repairs socket piano flush type, 16A, 6pin, AC, 240V ISI Marked complete all as specified and directed.
S&F in repairs Electronic socket size step Fan Regulator, 240V, AC, 240V, ISI Marked complete all as specified and directed.
S&F in repairs Modular Switch, 1 Module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Modular Switch, 1 Module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Modular Bell Push, 1 Module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Modular Step Fan Regulator, 2 Module, 120W, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way ISI Marked complete all as specified and directed.
S&F in repairs Modular white cover plate with frame, 1 Module ISI marked complete all as specified and directed.
S&F in repairs Modular white cover plate with frame, 2 Module ISI marked complete all as specified and directed.
S&F in repairs Modular white cover plate with frame, 3 / 4 Module ISI marked complete all as specified and directed.
S&F in repairs Modular white cover plate with frame, 6 Module ISI marked complete complete all as specified and directed.
S&F in repairsModular white cover plate with frame, 8 Module ISI marked complete all as specified and directed.
S&F in repairs Modular Power Switch and Socket Unit with factory made poly carbonate modular box, 20A, 3Pin, AC, 240V incl 20A MCB SP and Plug Top ISI Marked complete all as specified and directed. Make: Havells/IndoAsian/Legrand.
S&F in repairs lamp holder, PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, ISI marked complete all as specified and directed.
S&F in repairs Ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V, ISI Marked complete all as specified and directed.
S&F in repairs Call Bell, AC, 240V, SP, ISI Marked complete all as specified and directed.
S&F in repairs fan Condenser 2.5 mfd 240 Volts ISI marked complete all as specified and directed.
S&F in repairs fan Condenser 3.15 mfd 240 Volts ISI marked complete all as specified and directed.
S&F in repairs integrated LED tube light fitting surface mounting, poly carbonate batten type, 4' , 240V, T5, 20 watt complete all as specified and directed.
S&F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten,2', 240V, T5, 9/10 Watt complete all as specified and directed.
S&F in repairs Retrofit polycarbonate diffuser type 20 watt retrofit LED tube rod 4 feet, 240V complete all as specified and directed.
S&F in repairs Fancy light cast Aluminum polyurethane paint(with prior Treatments)bracket with round base with LED Lamp 05 to 11 watts complete all as specified and directed.
S&F in replacement, 15 Watts LED lamp 2 pin with B22 base, clear acrylic diffuser, power factor .90, 100 lumens per watt complete all as specified and directed.
All as per Srl item No 126 here-in-before but 4/5 Watts
S&F in repair Metallic Enclosure, SPN DB, 240V, AC, 2 way, double door with 200Amps rated busbar ISI Marked complete all as specified and directed.
All as per Srl item No 128 here-in-before but 4 way with 200Amps rated busbar.
All as per Srl item No 128 here-in-before but 8 way with 200Amps rated busbar.
All as per Srl item No 128 here-in-before but 12 way with 200Amps rated busbar.
S&F in repair MCB SP 6 to 32 A, AC, 240V, 10KA ISI Marked complete all as specified and directed.
S&F in repair Isolator DP, 40A, AC, 240V, ISI Marked complete all as specified and directed.
S&F in repair Isolator 4P, 63A, AC, 415V, ISI Marked complete all as specified and directed.
S&F in repair Isolator 4P, 100A, AC, 415V, ISI Marked complete all as specified and directed.
Material and labour for 3 phase sub main wiring with 06 Sqmm nominal cross sectional area, four run of single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including two run of continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into existing concealed conduit of 32 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing. complete all as specified and directed Note:-One meter of conduit along with 6x6 sq mm wire shall be measured as one unit length.
Tridev Construction Company
M/S VIKRANT ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .