PROVISION OF BUILDING FOR EX SERVICEMEN CONTRIBUTORY HEALTH SCHEME (ECHS) POLYCLINIC TYPE D (NON MIL STN) AT BULDHANA UNDER GE(S) AHILYANAGAR

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in any kind of soil soil complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator) in ordinary rock, in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) in hard rock, in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) in hard rock, in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift exceeding 1.5 m and not exceeding 3.0m, including getting out the excavated and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) in ordinary rock over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) in hard rock over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift not exceeding 1.5m, complete all as specified and as directed by Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) in hard rock over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift exceeding 1.5m and not exceeding 3.0m, complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exc 1.5m wide and nexc 1.5m deep & getting out in Hard/ dense soil for foundations etc and getting out complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers in any type of soil not exc 25cm complete all as specified and as directed.

M & L anti termite Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface

M & L anti termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L anti termite Treating the the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M & L anti termite Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M&L Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as speified.

M&L Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) in columns, pillars ,piers, posts and struts complete all as specified and as directed

M&L Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) as in beams, cantilevers, bressummer lintel over 1.5 m span complete all as specified and as directed

M&L Reinforced cement concrete (Design mix) M-25 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for reinforced cement concrete, M-25 Design mix (20mm graded stone aggregate) as in chajjas complete all as specified and as directed

M&L for reinforced cement concrete, M-25 Design mix (20mm graded stone aggregate) as in facia /drop for roof projection Fins, parapets and railings exc. 60cm in height, newels,balustrade, and the like complete all as specified and directed.

Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions squre, rectangular or polygonal complete all as specified.

Use and waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

Use and waste formwork to edges of concrete roofs exec 10 cm but n exc 20cm wide for fair finished surfaces and similar work for rough finished surfaces of concrete complete all as specified and as directed

Use and waste formwork to chajjas, trough and simmilar items including edges for rough finished surfaces of concrete complete all as specified and as directed

Use and waste formwork to sides and soffits of fascia for rough finished surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to faces of walls,retaining walls, abutments, parapets and staircase railings and similar work etc., vertical or to batter complete all as specified and as directed.

M/L for Damp proof course to horizontal or vertical surface including necessary formwork of 40 mm thick in PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate mixed with integral water proofing compound conforming to IS-2645.

M & L for Mild steel bars 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete all as specified and as directed.

Filling under floor in including spreading, levelling, watering and well ramming in layers in any type of soil obtained from excavation not exc 25cm thick complete all as specified and as directed.

M&L for AAC block masonry , Grade-I (Min compressive strength 5N/Sqmm), Density 651-750Kg/Cum and shall be laid using polymer modified and curing free ready mix jointing mortar of joint thickness 3mm to 4mm complete all as specified and as directed. Note: Size of AAC blocks shall be as per site requirement and to be approved by GE.

M&L for rendering 10mm thick single coat ready mix plaster as per manufacturers instruction on fair faces of brick work or concrete surfaces, finished surfaces even & smooth complete all as specified and as directed.

M&L for rendering 12mm thick single coat ready mix plaster as per manufacturers instruction on fair faces of brick work or concrete surfaces finished even & fair complete all as specified and as directed.

M&L for rendering 5mm thick single coat ready mix plaster as per manufacturers instruction1:3 on fair faces of concrete surfaces in ceiling including finishing even & smooth complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance on over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge..

M&L for preparation of new plastered surfaces of walls and applying 1.5 to 2mm thick wall care putty to achieve smooth surface, sanding the surface and applying two coats of acrylic distemper of approved shade/tint over a coat of interior acrylic primer complete all as specified and as directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed .

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and directed.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 125X65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed. Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F 35 mm thick, second class hard

wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 100 mm size butt hinges medium weight, stainless steel and fixed all as specified and as directed.

S & F 250 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed.

S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed.

S&F mild steel helical door spring 300 mm long ordinary rat tail type including roller and roller plate fixed with screws to wooden frame complete all as specified and as directed.

M&L for preparation of new wooden surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of pink primer complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 150mm length of cover plate,complete all as specified and directed.

S&F powder coated aluminium door with frame and shutter in two panels (top and bottom) made out of aluminium sections (make Jindal or equivalent) including 5 mm thick sheet glass, aluminium cleats, rubber/ neoprene beading, all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style- 47 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min) Note : Shade shall be as approved by Engineer-in-Charge.

S & F powder coated aluminum windows, three track, made out of aluminium sections including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a) Window frame: (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter: (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m) Note : Shade shall be as approved by Engineer-in-Charge.

S&F, powder coated anodised aluminium ventilator having aluminium section weighing not less than 0.55 kg/m, including aluminium louvers, frosted 3mm thick glass, SS wire mesh, including arrangement for fixing of exhaust fan and necessary joining cleats,glazing clips,screws etc complete all as specified and as directed. Note : Shade shall be as approved by Engineer-in-Charge.

S&F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

S&F mild steel framed work such as grills, framed guard bars and similar work conforming to Fe-290.Gde-E-165, welded to steel ventilators & window complete all as specified and as directed.

S&F in repairs, 20mm dia stainless steel curtain rod with brackets and finials at both ends as per site requirement ( Min length 0.9 and Max length 2m) including taking down old curtain rods with accessories complete all as specified and as directed. Note :- The Cost of brackets and knobs shall deemed to be included in the quoted rate.

M & L for Mild steel TMT bars 6mm dia to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for Mild steel bars TMT Bars 5mm and over upto and including 10mm dia in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F hat and coat hooks, aluminium solid body 175mm to 250 mm long, complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surfaces as dado of size 450x300x 7-8mm, thick set and jointed in neat cement and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:3 on other than fair faces of brick work etc complete all as specified & directed. Note: Color, size and shade shall be as approved by Engineer-in-charge

M&L for Vitrified tiles double charged (light shade) 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm (600 X 600 mm), as in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:6, complete all as specified and as directed. Note: Color and shade shall be as approved by Engineer-in-charge

M&L 18 to 20mm thick pre-polished granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projection, urinal partition, including full round moulding the edge, laid over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture or pigment to match the shade of granite and rubbing, polishing to achieve mirror finish complete all as specified and as directed. Note : Colour and shade shall be as approved by GE.

M&L for machine cut cudappah stone slab 20-25mm thick laid over and including 20 mm thick bedding layer of cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for precast cement concrete coloured chequered tiles with glossy finish of size 25cm x 25cm x 25mm thick/30cm x 30cm x 25mm thick, machine pressed with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over a

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors and pavings complete all as specified and as directed.

Supply only liquid water proofing compound complete, ISI mark all as specified and as directed.

M&L for moorum filling in floors or paving, laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hardcore of gauge not exc 63 mm size of broken stone or boulder, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for pre-cast cement concrete coloured chequered tiles glossy finish of size 25cm x25cm x25mm thick/30cmx30cmx25mm thick machine pressed with grey cement and pigment set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM mortar 1: 3 complete all as specified & directed.

S&F 15mm bore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed.

Supplying and laying 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, in any length, with fittings such as socket, elbow, bends, tees,

reducer, union, caps plug, nipple etc complete all as specified and directed.

Cutting chases n. exc 10 cm in girth, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks colour white (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting complete all as specified and as directed.

S&F bib tap 15mm dia, fancy type, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed. Make : Cat No. F1015151 of CERA or equivalent model of makes specified.

S&F two way bib tap 15mm dia, fancy type, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed. Make : Cat No. F1015161 of CERA or equivalent model of makes specified.

S & F angle valves/stop valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed. Cat No. F1015201 of CERA or equivalent model of makes specified.

S&F, tubular towel rail, chromium plated, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

S & F stainless steel grating with square frame (grating thickness 1mm and frame thickness 1.5mm) of size 125mm (minimum) with waste hole complete all as specified and as directed.

S&F, 75 mm dia PVC(SWR) nahani/floor trap with grating including jointing to waste pipe with solvent cement complete all as specified and as directed. .

S&F, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

S&F, Health faucet (ABS Body) suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F toilet paper holder of chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed. Make : Cat No. F1015109CH of CERA or equivalent model of makes specified.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve and handle including brackets, PVC connection pipe 450mm long, etc complete all as specified and as directed. Make : Cat No. B1010110 of CERA or equivalent model of makes specified.

S&F vitreous china wash down water closet (pedestal pattern) white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed. Make : Cat No. S1053102 of CERA or equivalent model of makes specified.

S&F vitreous china wash hand basin, white, counter sunk, of size 520 mm x 450 mm x 200 mm, including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe15mm dia, PVC connection pipe 450mm long complete all as specified and as directed. Make : Cat No. S2030101 of CERA or equivalent model of makes specified.

S&F vitreous China Half stall urinal size of 390 x 360 x 590 mm (minimum), white with grating and union for discharge pipe (excluding flushing cistern, flush pipe) including urinal spreader of brass chromium plated for fixing with 15 mm dia pipe, PVC connection, 40mm PVC waste pipe & 40 mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe complete all as specified and as directed. Make : Johnson Cat Part No P0519PW0703 or Cat No. S4020112 of CERA or equivalent model of makes specified.

S&F Soap dish, chromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats.

S&F, sinks made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, CP waste coupling 40mm, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 200 mm including CP coupling 40mm complete all as specified and as directed. Make : Cat No. SBFB 01A of JAYNA or equivalent model of makes specified.

S&F 32/ 40 mm bore PVC flexible outlet pipes for wash basin/ sink/ urinal fixed complete all as specified and as directed.

S&F 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixd to wall or laid in trenches or in floors all as specified and as directed.

S&F PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls or laid in floors complete including clamps for securing pipe complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed

S&F PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) 75mm dia in junction single, (Bend) equal or unequal complete all as specified and as directed.

Ditto- all as per Item No. 65 above but as in dado/skirting or on vertical surfaces and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

nd including 15mm thick screed bed in cement mortar 1:6 etc complete all as specified & directed. Note: Color and shade shall be as approved by Engineer-in-charge

S&F 110 mm dia PVC (SWR) bends with access door of any radius, complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top:- (i) Surface roughening concrete slab by picking, sweeping clean and washing down with water to remove dust etc and applying cement slurry @3kg/Sqm. (ii) Screed bed or bedding layer of mortar 1:4 in 15 mm thick for laying as in roof slab with including mixing of WPC (as per manufacturers instruction) and surface finished fair and smooth without using extra cement. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.25ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be laid/ applied over bituminous primer as specified above, and application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) Applying two coat of bituminous aluminum paint over the APP modified membrance @ 0.11Kg/sqm. Note: Water proofing compound shall be measured separately and paid under respective item of BoQ.

M&L for rolled mild steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, of. Fe 410-W (Gde E- 250) quality -A, complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Use and waste formwork to edges of concrete roofs n exc 20cm wide for fair finished surfaces and similar work of concrete complete all as specified and as directed

M&L for 100mm thick plain cement concrete, 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as levelling course in sub base of floors and pavings complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coat of cement based paint on over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge..

M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed .

S&F Steel rolling shutters, with thickness of lath 1.25 mm without ball bearing, as specified, including top cover, anchoring rod, hasp and staple, safety lever lockmild steel with 4 levers and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed.

S&F ball bearing, for roling shutters complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for cement - concrete P.C.C 1: 2 :4 type B 2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete etc complete all as specified and directed.

Use and waste Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter. rough finished flat surfaces of concrete, etc complete all as specified and directed.

M&L Reinforced cement concrete (Design mix) M-30 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc for water retaining structure complete all as speified.

M&L for Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) in Walls, retaining Walls and the like ,any thickness,above top of footing etc for water retaining structure complete all as specified and directed.

M& L for Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregates) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S & F 100mm dia CI Vent pipe Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and as directed.

M& L for laying Polythene fim layer 200 micron thick as moisture barrier laid on a coat of blown type bitumen @ 2.20kg/sqm complete all as specified and as directed.

M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean redius, built in cement mortar 1:6 with, complete all as specified and as directed.

M&L for rendering 10mm thick on in CM 1:6 fair faces of brick/concrete sufaces surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on other than fair faces of brick work masonary surface or concrete surface finished even and fair without using extra cement complete all as specified and directed.

S&F rolled steel as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, of Fe-290 (Gde E 165) complete all as specified and as directed.

M&L PCC 1:2:4 type B1 (20mm graded stone agg) incl necessary form work etc as in lintels, copings etc complete all as specified and as directed.

S&F MS butt hinges cold rorred medium weight 75 mm size complete all as specified and directed

S & F MS sliding door bolt 300mm size etc complete all as specified and directed by Engineer-in-Charge.

M&L for providing cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in copings , haunchings and the like including weathering slightly rounded or chamfered angles and throating with necessary form work as required & directed.

M&L for 150 mm internal dia reinforced concrete pipes with collars, class NP3, laid and jointed complete all as specified and as directed.

M&L Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in bed to drain pipes of 150mm bore including forming cradles complete all as speccired and directed.

M&L for precast cement concrete type B-1 (1:2:4) (20 mm graded stone aggregates) set in CM (1:6) in cover slab and similar work including formwork Notes : Reinforcement shall be measured and paid separately

M&L extra for forming fair finished drain or channel 30 Cm inner girth with using extra cement including forms, mouds, mitred /stopped ends etc complete all as specified and directed.

Construction of RCC septic tank conventional type( for 50 users) designed to carry out

sewage and sullage water, excavation in any type of soil /soft/Hard Rock including Returning filling and removing of surplus soil/rock or filling under floor. PCC (1:4:8) below foundation , RCC M-30 design mix in walls, base slab baffale wall and roof slab incl beams etc with vent shaft, manhole openings with cover connection effective depth is 1.5 mtr and over all depth is 3.0 mtr etc complete all shown on TD DRG (Ref drg No AFB/TD/228/2018(S)sheet 1R/1 ) and complete al as specified and directed.

Construction of sokage well,(2.4 mtr dia x 3 m effective depth) including excavation in Any type of soil/soft/Hard Rock including Returning filling and removing of soil /filling under floor, foundation in PCC (1:3:6) type C-2 walls of honey combed masonary with top slab in RCC M25 concrete, brick masonery in CM 1:4, RCC cover slab in M-25 with SFRCcover,interconnecting pipes of RCC, complete filled with brick bats incl intercepting chamber screen chamber brick work in CM RCC cover slab in M 25 interconnecting pipes of RCC / DWC complete filling with brick bats of required size complete all as per (TD Drawing No CEPZ/2019/TD/03 sheet 1/2 2/2 ) and complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete.

M & L for providing precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in landings cover slabs(for manholes etc)

M & for RCC pipe , 450mm bore , class NP-2 laid and jointed complete with coller for entry from main road

M&L Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in bed to drain pipes of 450mm bore including packing under and haunchings against the sides of drain pipes after they are laid complete all as speccired and directed.

Material and labour for in replacement of MS box of size 180x120x30 cm depth, dust proof with front opening hinged door both side, made out of 2mm thick MS sheet cubical type with powder coated painting for mounting of MCCB, DB's, electric meter etc inside the box fixed in wall by necessary cutting of wall of suitable size in concealled and making good the surface, by applying cement work, brick work and matching colour (Oil bond distemper) etc including dismantling of MS box with MCCB DB's and electric meters and refixing the same MCCB, DB's and electric meters in new box carefully including necessary electric connection by suitable size of copper conductor cable of suitable length and testing completed all as directed by Engr-in-Charge.

Excavation in post holes in Hard rock, each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

Excavation in trenches n.exc 1.5 M deep and getting out in hard Rock

M&L for 45 to 50mm thick Prestressed reinforced cement concrete solid slabs finished fair on both sides in Prestressed cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) (with interlocking joints as directed) including mouldings and fixed as compound wall in grooves of Prestressed posts as per approved design and pattern and set in cement mortar 1:4 complete all as specified and as directed. Note : (a) The cost of reinforcement and form work shall deemed to be included in rate quoted. (b) Surface area of slabs excluding embedded portion in grooves shall be measured for payment. (c) Prestressed concrete posts shall be measured and paid separately.

M&L for prestressed reinforced cement concrete solid posts with fair faces in precast cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) (with grooves for interlocking of precast slabs as directed) including mouldings and fixed in columns, posts, boundary pillars with and including grooves to locking of precast RCC precast wall panels, set in cement mortar 1:4 complete all as specified and as directed. Notes : (a) The cost of reinforcement and form work shall deemed to be included in rate quoted. (b) Precast/prestressed slabs for wall shall be measured and paid separately under respective item.

S&F UPVC pipes 100mm dia for weep holes / in boundary wall

Excavation over area in soft loose soil nexc 1.5m deep and getting out

ked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2.four runs of 10 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

M & L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2.Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

Supply and fix in replacement sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.

Supply & fix exhaust fans PVC body AC single phase 230/ 240 V of size 250 mm sweep with louver incl making hole of size 250 mm dia in any type of wall and making good to match the surrounding area complete all as specified and directed.) Note:Quoted rates includes taking down and old Ceiling fans submitted to MES Store yard.

Removing the excavated surplus soils not exceeding 50mtr & depositings where directed at a level n.exc 1.5 mtr above the starting point

Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 80 mm thick ,hydraulically pressed cemented tiles of grey colour with pigments,(glossy finish/ rubber mat finish) factory made, M-40 grade conforming to IS-15658-2006, as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed. (Note : Size, shape & pattern of tiles shall be as approved by GE).

M&L precast cement concrete Kerbstone of M25 grade including slightly rounded or chamfered angles fixing with cm 1:4 , including excavation and fixing complete. (Note : Size, shape shall be as approved by GE).

M & L point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including heavy grade PVC rigid conduit not less than 20 mm dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made flush metal GI boxes 1.6mm thickness of suitable size as per site requirement, totally concealed in walls with modular cover plates and frames fixed flush with wall surface for mounting of switches, sockets, fan regulates etc; including 1.5 Sqmm 1100 V grade PVC insulated, unsheathed flexible multi stranded copper conductor FRLS cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & directed for light point or one fan point controlled by one, one way switch NOTES: (a) Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) All points shall be earthed up to fittings. (c) The unit rate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making good disturbed surfaces .

S&F of lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & as directed.

S&F of ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F of bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F of modular switch one way, 6 Amp, one module, 230V all as specified and directed.

S&F of modular bell push, 6 Amp, one module, 230V all as specified and directed.

S&F of modular socket, 6A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F of modular switch one way, 16 Amp, one module, 230V all as specified and directed.

S&F of modular socket, 6A/16A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F of modular fan Regulator, 120 watt , 2 module complete all as specifed and as directed.

Supply and fixing ceiling fans complete with Aluminium blades, down rods, suitable for electronic regulator and accessories, 230 V, 1200 mm sweep 26+/- 10 % watt. Min air delivery 210 CMM with service value 8.1 cum/min/W, BEE Five star rated with Super enamelled copper wire,class B insulation, brushless direct current motor (BLDC) with out remote complete all as specified and directed.

S & F in replacement square profile LED lighting fixture with extruded polycorbonate,environmental friendly,energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection complete with all as specified and directed by Engineer-in-charge..

Supply testing commissioning LT feederl pilar box double door factory fabricated out door type front openable with locking arrangements compartmental type made out of 3.15 mm thick CRCA sheet apoxy painted and two coats of synthetic enamel Paint over a coat of red oxide , of size 750 mm x 600mmx 550mm complete mounted on and including MS angle Iron frame made out of 40x6 mm thick of suitable size painted with black synthetic enammed paint over a coat of red oxide primer embedded in PCC (1:2:4) type B-1 in foundation up to the depth of 300 mm and 150 mm above ground level with suitable size & No of Cable glands and including necessary excavation and earth work suitable for housing and including the following accessories:- (a) MCCB 4 Pole 160 A, 25 KA adjustable thermal & magnetic settings - 01 Nos ( Incomer) (b) MCCB 100 Amps 4 Pole 25 KA as outgoing - 02 Nos ( 01 is standby ) (c) MCB 40 Amps TPN 10 KA as outgoing - 01 Nos for security lights (d) MCB TPN 63 Amps - 02 No (e) MCB SPN 20 Amps - 02 No (f) Multifunctional Energy Meter (Voltage,Amp& Frequency) - 01 No (g) Copperbus bar 250 Amp with 4 Strips of suitable size-01 Set (h) LED type indicator lamp -01 Set (03 Nos) (j) Astronomical time switch three phase 415 V suitable for Indian Region longitude/latitude with 3 pole ML-2 pole contractor suitable for 60 Amp complete with all acces

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level of any strata and connected to galvanized earth lead strip 32 mm x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 40 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. ( For LT panel - 02 Nos & DG Set -04 Nos) Note : 7.5 Mtr of GI Strip included in the above items , more than 7.5 Mtrs will be measured and paid seprately under respective items.

Supply and laying Double Walled Corrugated (DWC) HDPE pipe of nominal bore 50 mm including 90 degree bends with coupler and rubber ring, conforming to IS : 16205 Part 24 Type 450N, laid in trenches for cable protection complete, all as specified and as directed.

Supplying and laying or passing through pipe , 1100 volts grade heavy duty cable with XLPE insulated aluminum stranded conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheatther 6 Sqmm 4 Core complete all as specified and directed .

Supplying and laying or passing through pipe , 1100 volts grade heavy duty cable with XLPE insulated aluminum standard conductor served with an inner sheathing or PVC tape amoured and galvanized steel wire or tape and overall PVC sheather 16 Sqmm 4 Core complete all as specified and directed.

Supply and fixing in replacement factory made powder coated sheet metal enclosure, TPN Vertical Distribution Boards with MCCB four pole 16 KA, 100 Amp with fixed thermal and magnetic settings as incomer IP43 protection Double Door : Plain 4 way with suitable rated busbar,neutral link, and MCB SP 40 Amp-8 Nos as outgoings complete all as specified and directed.

Point

All as per serial item No. 151 here-in-before but for one 6 Amp, 3 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 151 here-in-before but on independent board.

All as per serial item No. 151 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No.151 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 16 Amp, 3 pin socket on independent board.

Supplying and laying XLPE insulated heavy duty electric cables with aluminum conductor, 1100 Volts grade, armored power cable size 25 Sqmm , 3.5/4.0 core with fixing accessories complete all as specified and directed.

Supply and fix on load change over switches with side handle operated 415 Volts, 50 HZ , 4 pole 125 Amps with sheet steel body enclosure complete all as specified and directed.

M&L for removing 15 KVA DG set (Old ) from foundation & Refixing at near new bldg. incl making new foundation size as per site reqmt for DG set with stud and vibration pad and conveyance from existing ECHS polyclinic including making all electric connection and testing after installation complete all as spd and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply and fixing LED street light 35/36 W IP 65 bldg mounted complete all as specified and directed.

sories -01 Nos (k) Internal wiring of panel board with copper cable of appropriate size single core including control fuses and cable glands, lungs of suitable size for incoming and out going cables earthing terminal and cable glands.

M & L Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4 mm dia , by means nut bolt, nuts, check nuts and washer of the GI .Earth wire connected upto main earth point/DBs alongwith 15mm dia incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

S&F MCB SPN, AC 240 V, 40 to 63 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

Supply and fix MCB SP, AC 240 V,6 to 32 Amps 10 KA capacity ,'c' series making connection with suitabl size of copper lugs etc complete all as specified and directed by engineer-in-charge.

Supply and fix sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 4 way protection class IP-42,suitabl for fixing MCBs,Isolators etc,confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 100 Amps rated copper busbar,with Neutral bar,Earthbar and cable alley for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed

Supply and fix sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way protection class IP-42,suitabl for fixing MCBs,Isolators etc,confirming As per IEC 61439-3,suitable for flush mounting and surface mounting,with 100 Amps rated copper busbar,with Neutral bar,Earthbar and cable alley for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed.

S & F Tubes medium grade galvanized with all fitting and fixed complete to wall & ceiling or laid in trenches of 25 mm dia bore all as spd and directed