SPECIAL REPAIRS TO ADMINISTRATIVE BUILDING AT CPDC HYDERABAD

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

Demolition of brick /stone masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exceeding 1.50 sqm but not exceeding 4.0sq.m each (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exceeding 2.0sq.m each complete all as specified and directed.

Taking down shutters of any description exceeding 1.0sq.m but not exceeding 2.0sq.m each and refixing the same position complete all as specified and directed.

Brickwork with fly ash bricks old size straight or curved on plan exceeding 6 metre mean radius , built in CM 1:6 complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing liquid and finishing the surface even and smooth with out using exta cement on external walls complete all as specified and directed. NOTE:- Water proofing liquid shall be measured and paid separately under respective item of this Schedule.

Rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces/ stone surfaces finishing the surface even and smooth with out using exta cement on external walls complete all as specified and directed.

Rendering 5 mm thick, in cm 1:3 on ceiling ,chajjas and facias and finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding /backing complete all as specified and directed.

Double charged fully Vitrified tiles, light shade 10 mm thick of size 600mm x 600mm polished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Double charged fully Vitrified tiles, light shade 10 mm thick of size 600mm x 100mm polished in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Non - skid Ceramic coloured tiles (Grade B-IIa) of superior quality of size 400mmx400mmx 7 to 8 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

Non - skid Ceramic coloured tiles (Grade B-IIa) of superior quality of size 400mmx100mmx 7 to 8 mm thick in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Non - skid Ceramic coloured tiles (Grade B-IIa) of superior quality of size 300mmx300mmx 7 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

Glazed ceramic tiles (Grade B-IIa) of superior quality in vertical surfaces such as dado 300x450x7 to 8 mm / 450 mm x 350 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Plain cement concrete 1:2:4, type B0 (using 12.50mm graded stone aggregate), 25mm thick as in base course of floors, complete all as specified and directed.

75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection, laid in bays, bay area not exceeding 2sqm each, finishing the surface even and smooth without using extra cement including necessary formwork and filling the joints with mastic filling comprising 1 part of heated bitumen and 3 parts of sand (all by weight) complete all as specified and directed.

Aluminium powder coated (minimum thickness of powder coating 50 micron) frame as in doors /windows / partitions etc including glazing clips ,fabrication and fixing in position complete to receive sheet glass /particle board complete all as specified and directed.

Aluminium door powder coated shutters (to receive glass & prelaminated particle board) ( minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg per metre including necessary joining cleats glazing clips, ruber neoprene packing. handles 2 Nos in each door, hinges anodised aluminum snap beading screws etc complete all as specified and directed. Note: 5 mm thick glass and 12mm thick prelaminated particle board will be measured and paid separately .

Aluminium powder coated window and ventilators shutters fixed type without sash bars ( minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg per metre including necessary joining cleats glazing clips, ruber neoprene packing. anodised aluminum snap beading screws etc complete all as specified and directed. Note: 5 mm thick glass will be measured and paid separately .

Sheet glass, 5.0 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed.

12 mm thick prelaminated particle board, exterior grade decorative lamination on both faces fixed in aluminium partition /doors etc complete all as specified and directed.

Second class hard wood plain, solid straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue and pinned at joints complete all as specified and as directed.

35 thick flush shutters, solid core construction, with block board core and plywood face panels, both faces is covered with decorative face veneer with teak wood lipping to match the door complete all as specified and directed.

Dismantling existing wall and ceiling of any type including frame work complete all as specified and directed.

Providing & fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles with Armstrong silhouette exposed grid system . The tiles should have Humidity Resistance (RH) of 99%, NRC 0.6, Light Reflectance >85%, Thermal Conductivity k=0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 pt-6 & 7) in module size of 600 x 600 x16mm, suitable for Green Building application, with Recycled content of 31%. The tile shall be laid on Armstrong Suprafine 32 with 15mm wide T section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200mm & 600mm cross Tees with a web height of 32mm and a load carrying capacity of 7.5 Kgs/M2 & minimum pull out strength of 100 Kgs. The 'T' sections have galvanising of 90 grams per M2 and need to be installed with suspension system complete all as specified and directed. Makes: Armstrong or equivalent in Saint Gobain.

Factory made UPVC window /ventilators of profile width 56mm to 62mm ,limit thermal conductivity 1.3 kcal/sqm per hr centigrade ,sound insulation upto 40Dbs ,density 1.46gm/ml,tensile strength 43.90 N/sqmm ,% of elongation at break 215, tensile modulas 2840 N/sqmm flextural 515N/sqmm ,heat aging 15 degree C, no surface defects ,thickness 2mm, flextural modular elasticity 2200/sqmm ,double gasket and wool pile on window ,multipoint gear locking at difference side of frame ,antilift device on slide windows with tamper proof screws area exc 2.00 sqm each as per manufacturers instructions complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

150mm long,extruded aluminium handles, fabricated type, anodised, complete all as specified and directed.

100mm size Butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Butt hinges 100mm size extruded aluminium alloy with galvanised mild steel hinge pin ,anodised type B-21 complete all as specified and directed.

Door closer hydraulically regulated, designation No, 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61to 80 kg ,aluminium die cast body complete all as specified and directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal /wooden frame with oil putty or beading complete all as specified and directed.

Sheet glass, 4.0 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed.

Figured glass, 4.0 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane complete all as specified and directed.

Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Collapsible steel gates , top hung ,consisting of channel pickets ,pivoted flat bars ,top and bottom ruuners ,brass handles etc as specified and erected in position and securing runners with hold fasts and bracket including taking down existing one complete all as specified and directed.

Gear operated steel rolling shutters of thickness of laths 1.25mm with out ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated complete all as specified and directed.

Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as sepecified and directed.

Rotational moulde polyethelene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) double layer hoisted and fixed in position all as sepecified in SSR Part -I including dismantling and removing to store o complete all as specified and directed

Rotational moulde polyethelene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) double layer hoisted and fixed in position all as sepecified in SSR Part -I including dismantling and removing to store o complete all as specified and directed

Disconnecting existing water tanks exceeding 500 lit and not exceeding 1000 lit capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scales and durt etc complete all as sepecified and directed.

Disconnecting existing water tanks exceeding 1000 lit and not exceeding 2000 lit capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scales and durt etc complete all as sepecified and directed.

25 mm bore Gun metal, globe or gate valves with iron wheel head, ISI Marked screwed both ends for iron/GI pipe and fixed including taking down existing gate valve complete all as specified.

Taking up or down steel tubing and connections, 15mm bore, complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore, complete all as specified and directed.

Taking up or down steel tubing and connections, 25mm bore, complete all as specified and directed.

Galvanised Steel water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing and including making good to match with the existing surface complete all as specified and as directed.

Galvanised Steel water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing and including making good to match with the existing surface complete all as specified and as directed.

Galvanised Steel water tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing and including making good to match with the existing surface complete all as specified and as directed.

Refixing of old steel tubing 15mm bore of pipe and connections in new or old position in walls /ceiling/ floors complete all as specified and as directed.

Refixing of old steel tubing 20mm bore of pipe and connections in new or old position in walls /ceiling/ floors complete all as specified and as directed.

Refixing of old steel tubing 25mm bore of pipe and connections in new or old position in walls /ceiling/ floors complete all as specified and as directed.

25mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

Taking down rainwater pipes (any size pattern), including all fittings heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including provision of suitable size of PVC clamps complete all as specified and directed.

UPVC (SWR) bends any radius, 110mm bore including provision of suitable size of PVC clamps complete all as specified and directed.

Wash hand basin, Vitreous China , first quality, white colour, of size 550x450mm including cutting for and pinning in ends of brackets or erecting stand, with and including GI brackets, 32mm bore CP waste coupling (half or full threaded ) including taking down existing one complete all as specified and directed.

Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc., with and including provision of seat cover black closed pattern with flat bottom with mild steel CP hinging device including taking down existing unserviceble one complete all as specified and directed.

Vitreous china squatting pan 'Orissa" pattern, size 580x440mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish etc complete complete all as specified and as directed

Vitreous china urinals full stall type including cast copper alloy chromium plated water spreader ,32 mm dia waste coupling , brackets , CP self closing 15 mm bore push cock and 32 mm dia PVC waste pipe and including taking down existing one complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, jointing with existing 32mm dia flush pipe and connections to pipes and fixing of chain and pull, or lever, taking down existing unserviceble one complete all as specified and directed.

CP brass 32mm dia waste coupling half or full threaded taking down existing unserviceble one complete all as specified and directed.

32 mm PVC waste pipe fexible for WHB complete all as specified and directed.

Bib taps, cast copper alloy, fancy type, chromium plated, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , 15mm bore, with CP flange, including taking down old bib tap of any dia, complete all as specified and directed.(Minimum weight 550grams per each)

Health faucet, chromium plated, fancy type, brass body with 1.2metre length stainless steel braided rubber hose pipe and wall hook, fixed in position to wall, complete all as specified and directed.

Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15mm bore, including taking down old pillar tap of any dia, complete all as specified and directed.

Stop valves, cast copper alloy, fancy type, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, 15mm bore, including taking down unserviceable stop valve of any size, complete all as specified and directed.

PVC connections 15mm size with brass nuts of length 450/600mm, both ends having brass coupling nut and PVC washers including taking down unserviceable PVC connection of any size, complete all as specified and directed.

Preparation of old decorated surfaces of walls and ceiling and applying one coat of acrylic emulsion distemper at any height including necessary scafolding etc complete all as specified and directed

Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

French polishing on surfaces of any description ,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Preparation of old polished wooden surface of any description not otherwise described over 10cm width or girth and polishing with one or more coat of french polish complete all as specified and directed

Preparation of new plastered surfaces of walls and applying two coat of acrylic emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

Preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint over complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls incuding pilasters, cornices etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying two coats of weather-proof exterior emulsion paint over a coat of primer and over two coats of exnternal grade wall care putty ( total thickness not less than 1.50mm in two coats ) finished even and smooth, complete all as specified and directed

Preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint over complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coat of acrylic emulsion distemper over a coat of alkali resistant primer over two coats of internal grade wall care putty (total thickness not less than 1.50mm in two coats) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work and deposited where directed and complete all as specified and directed.

Taking down existing roof treatment of any description with bituminous felt including plaster /loose concrete and roughening the surfaces of old concrete by picking ,scraping ,cleaning and washing down with water to remove all dust etc complete all as specified and directed .

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

Rendering 10mm thick in CM 1:3 on concrete surfaces over roof slab and parapet walls mixed with water proofing liquid and finishing the surface even and smooth with out using exta cement, complete all as specified and directed. NOTE:- Water proofing liquid shall be measured and paid separately under respective item of this Schedule.

APP based polymeric membrane minimum weighing 3.5 kg / sq. m and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 160 gms / sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 litre/sq.m by forced application then applying one coat of bitumen @ 1.2 Kg / sq.m and applying one coat of aluminium paint @100ml /sqm complete all as specified and directed. The complete roof treatement shall be consisting of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 litre / sq.m (ii) Laying of APP based membrane of specified thickness and weight. (iii) Applying one coat of bitumen of grade 85/25@ 1.2 Kg / sq.m (iv) Applying two coats of bituminous aluminium paint @100ml /sqm

APP based polymeric membrane minimum weighing 3.5 kg / sq. m and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 160 gms / sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 litre/sq.m by forced application then applying one coat of bitumen @ 1.2 Kg / sq.m and applying one coat of aluminium paint @100ml /sqm complete all as specified and directed. The complete roof treatement shall be consisting of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 litre / sq.m (ii) Laying of APP based membrane of specified thickness and weight. (iii) Applying one coat of bitumen of grade 85/25@ 1.2 Kg / sq.m (iv) Hydraulically pressed burnt clay tile plain of size 250x250x22mm machine made laid over and including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing liquid and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement.

Supply only water proofing liquid .

Plain cement concrete 1:2:4 type B1,20mm graded stone aggregate as in copings, platform for water tanks ,kerb ,coving etc on roof slab to maitain proper slope and including necessary formwork as required, complete all as specified and directed.

Plain cement concrete 1:2:4 type B0,12.5mm graded stone aggregate as in roof kerb of mud stops ,rounded or chamfered on edges & coving etc on roof and including necessary formwork as required, complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 and making good in CM 1:3 after inserting membrane into the groove complete all as specified and directed.

Plain cement concrete 1:2:4 type B1,20mm graded stone aggregate as in bed block or fixing of hold fast etc and including necessary formwork as required, complete all as specified and directed.

Mild steel work as in hold fast conforming to Fe-290 Gde-E-165 complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Chromium plated fancy type 20mm dia 'D' type towel Rail 600mm long between flanges with brackets and fixed with and including provision of Chromium plated brass screws and wooden / plastic cleats, fixed in repairs, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Machine cut Granite (of any type) stone slab of 18-20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including provision of 15mm thick screed bed in CM 1:4 complete all as specified and directed. Note : Granite stone slab shall not be more than in two pieces in case of L-shaped cooking platform and in other cases, it should be in one piece only.

Machine cut Granite (of any type) tiles of 18-20mm thick laid over and including provision of backing coat of CM 1:3, 10mm thick, laid in vertical surfaces such as skirtings, raisers to steps ,edges of platform etc., and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 V grade drawn through and including 20mm dia PVC conduit, medium grade, and conduit accessories, concealed in walls and terminated to and including provision of GI modular gang box on flushedin walls suitable for logic modular switches, sockets etc., and including logic modular white plates for fixing modular switches, sockets / regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for one light / fan point /bell point controlled by one, one-way switch 5 Amp. NOTE: 1. The quoted rate shall deemed to include the cost of GI boxes, modular white cover plate, provision of blank plates as per requirement etc. 2.Rates deemed to be including cutting groves and nitch for fixing of GI boxes / conduit pipe where ever required and making good the disturbed surfaces of wall / ceiling matching with adjoining surfaces .

All as per Sl. Item No. 110 here-in-before but for one 3-pin 5/6Amp socket outlet point on independent board controlled by one one-way 5/6Amp switch, complete all as specified and directed.

All as per Sl. Item No. 110 here-in-before but for one 3-pin 5/6Amp socket outlet point on same board controlled by one one-way 5/6Amp switch, complete all as specified and directed.

Point wiring complete with 2.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in walls, roofs, floors etc, by means of saddles and clips etc, including provision of modular GI gang box ISI marked flushed in walls and white cover for housing switches, sockets, regulators etc., including 2.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for 3-pin 15/16 Amp socket outlet point on independent board, complete all as specified and directed. NOTE: 1. The quoted rate shall deemed to include the cost of GI boxes, modular white cover plate, provision of blank plates as per requirement etc. 2.Rates deemed to be including cutting groves and nitch for fixing of GI boxes / conduit pipe where ever required and making good the disturbed surfaces of wall / ceiling matching with adjoining surfaces .

Point wiring complete with 4.0 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in walls, roofs, floors etc, by means of saddles and clips etc, including provision of modular GI gang box ISI marked on the surface of walls and white cover for housing switches, sockets, regulators etc., including 4.0 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for one industrial socket for AC complete all as specified and directed. NOTE: 1. Rates deemed to be including cutting groves and nitch for fixing of GI boxes / conduit pipe where ever required and making good the disturbed surfaces of wall / ceiling matching with adjoining surfaces .

Modular Switch 6 Amps 240 V one way, 1 module complete all as specified and directed.

Modular Switch 16 Amps, 240 V one way, 1 module complete all as specified and directed.

Modular Socket 6 Amps (3 pin) 2 module complete all as specified and directed.

Modular Socket 6/16Amps 2 in 1 (6 pin) 2 module complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 32 Amp metal enclosed industrial type including taking down existing one complete all as specified and directed.

Factory made epoxy powder coated MCCB distribution board TP&N 8 way double door (VTPN MCCB DB)MCCB TPN as in comer ,with metal door IP -43 protection ,IK -09 as per IEC -61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and 250 Amps copper bus bar ,neutral bar ,standard DIN rail ,earth bar and cable ties for cable management ,top and bottom removable gland plates with Knockout semi flush to wall including taking down with accessories and making good distrubed surfaces and touch up with the same finishes complete all as specified and directed.Note: All incomimg /out going MCCB/MCBs shall be measured and paid under appropriate item . Make/Model of VTPN DB :LEGRAND cat part No 507747 or commercially equivalent in L&T/SEIMENS

MCB DB SPN double door 12-way sheet metal enclosure factory made suitable for MCBs 240volts confirming to IEC -61439-3 with 200 amps rated busbar ,neutral & earthing link bar ,surface mounting including taking down with accessoriesand making good distrubed surfaces complete all as specified and directed. Note: All MCBs shall be measured and paid under appropriate item . Make :LEGRAND/L&T/SEIMENS

MCB DB SPN double door 8-way sheet metal enclosure factory made suitable for MCBs 240volts confirming to IEC -61439-3 with 200 amps rated busbar ,neutral & earthing link bar ,surface mounting including taking down with accessories and making good distrubed surfaces complete all as specified and directed. Note: All MCBs shall be measured and paid under appropriate item . Make :LEGRAND/L&T/SEIMENS

MCCB with rating of 100 Amps ,415 Volts 4 pole with 25 KA ultimate breaking capacity ,thermal magnetic release with adjustable over load and short circuit release with electronic earth leakage module confirming to IS-13947& IEC-60947-2 & the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity ( Icu) ,MCCB shall be with suitable spreaders and phase barriers for each terminals complete all as specifeid and directed.

MCCB with rating of 200 Amps ,415 Volts 4 pole with 25 KA ultimate breaking capacity ,thermal magnetic release with adjustable over load and short circuit release with electronic earth leakage module confirming to IS-13947& IEC-60947-2 & the service short circuit breaking capacity (Ics) shall be equal to ultimate breaking capacity ( Icu) ,MCCB shall be with suitable spreaders and phase barriers for each terminals complete all as specifeid and directed.

MCB SPN 40 Amps, 'C'curve, working on 240V ,50Hz, 10KA breaking capacity, complete all as specifeid and directed. Make :LEGRAND/L&T/SEIMENS

MCB SP 6-32 Amps, 'C'curve, working on 230V ,50Hz, 10KA breaking capacity, complete all as specifeid and directed. Make :LEGRAND/L&T/SEIMENS

Sub main wiring complete with 2 runs of single core 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of non-metallic rigid PVC conduit 25mm dia and its accessories concealed in wall and connecting terminal ends to DB's including providing 1 run of single core 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size including taking down and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, One run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii)The rate quoted per unit shall be deemed to be inclusive of the extra length of cable /wire required for connection to MCBs .

Sub main wiring complete with 2 runs of single core 10 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of non-metallic rigid PVC conduit 25mm dia and its accessories concealed in wall and connecting terminal ends to DB's including providing 1 run of single core 10 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size including taking down and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 10sq.mm copper conductor, One run of 10.0 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii)The rate quoted per unit shall be deemed to be inclusive of the extra length of cable /wire required for connection to MCBs .

Ceiling rose three terminal surface bakelite type AC 50 Hz 230V, complete all as specified and directed.

Recessed mounted energy efficient LED luminaire 34W direct -indirect soft line designed color temp 5700K, including constant current electronic driver suitable for false ceiling complete with all accessories prewired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No. PLUTONEO2X2PLR34WLED840S or technocommercially equivalent in Philips/Bajaj/Crompton Greaves.

Basic all purpose surface and wall mounted 18 watts LED batten with aliminium housing and integrated electronic driver complete with all accessories internally prewired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No.LUMILINEPLUSBS18WWLED865SPCSS or technocommercially equivalent in Philips/Bajaj/Crompton Greaves.

LED down lighter energy efficient LED luminaire 10W ultra sleek recessed down light for low height false ceiling in round profile 230V with integrated electronic driver complete with all accessories prewired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No. INTEGRANEODLR10WLED857S or technocommercially equivalent in Philips/Bajaj/Crompton Greaves.

LED surface mounting square down light 15 Watt, 230 V ccomplete with all accessories pre-wired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No. PLUTOSURFACE1X1PLS15WLED840S or technocommercially equivalent in Philips/Bajaj/CG

Taking down exhaust fans 230mm of sweep of any make by disconnecting the electric connections and refixing in the existing place including painting and marking MES number of the same with 3 core new flexible cord from ceiling rose to fan, testing and commission complete all as specified and directed.

Taking down ceiling fans of any sweep of any make with down rods, blades canopy etc by disconnecting the electric connections and provision of new down rod of 1.2 m length including new conopy ,clamp ,rubber bush and refixing in the existing place including painting and marking MES number of the same with 3 core new flexible cord from ceiling rose to fan, testing and commission complete all as specified and directed.

Fan step type electronic regulator 120 watts , 2 module as required at site complete all as specified and directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', GI watering pipe 20mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 50mm thick RCC cover (1:2:4) mix as in cover slab with 8mm dia TMT bars as in reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including taking down and testing on completion, complete all as speciifed and as directed. NOTE:-1 Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC chamber , funnel and RCC cover plate.

Energy saving IP 65 flood light luminairs with high power JETA QUANTO PLUS 60 Watt as light source ccomplete with all accessories pre-wired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No. JETAQUANTOPLUSFLP60WLED757SYMLENS or technocommercially equivalent in Philips/Bajaj/Crompton Greaves.

Taking down carefully the split AC /window AC of any make and capacity by pumping down the refrigerant including stabilizer from the location and shifting to the MES store yard and reassembling the spilt AC/window AC at the location as directed including top up the refrigerant as required at site after renovation of building. Note: Job includes necessary core cutting on any type of wall /window and making good to the distrubed surface/window for drawing the suction and discharge lines

M/S VASU ENGINEERS

Anjana corporation

saradhi construction combines

UNITED ENGINEERS CORPORATION