Renovation of IEI and providing Air Conditioner units to State Project Management Unit SPMU at Shiksha Sadan Port Blair. Sw Providing Air Conditioners

Amount

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.(Drain pipes for IDU of AC)

SITC of 1.5 Ton 5 star(As per 2018 BEE star rating) Inverter High wall split type Air Conditioner (1 phase 220 Volt) with maximum cooling capacity of atleast 5250 Watts HITACHI KASHIKOI 5100X Model RSOS518HCEA or of equivalent cooling capacity in BLUESTAR/ VESTAR/ IFB/ MITSUBISHI/ O GENERAL/ DAIKIN with copper Condenser coil and rotary compressor i/c providing standard length of refrigerant copper pipe kit, cutting, drilling holes on the wall , cementing, painting to give an even look and smooth finish, wrapping PVC non adhessive white tape over insulation of gas pipe etc as required and as per the direction of E-in-C.

SITC of 02 Ton 5 star(As per 2018 BEE star rating) Inverter High wall split type Air Conditioner (1 phase 220 Volt) with maximum cooling capacity of atleast 7000 Watts Make : HITACHI KASHIKOI 5100X Model RMOS524HCEA or of equivalent cooling capacity in BLUESTAR/ VESTAR/ IFB/ MITSUBISHI/ O GENERAL/ DAIKIN with copper Condenser coil and rotary compressor i/c providing standard length of refrigerant copper pipe kit, cutting, drilling holes on the wall , cementing, painting to give an even look and smooth finish, wrapping PVC non adhessive white tape over insulation of gas pipe etc as required and as per the direction of E-in-C.

Providing and fixing of extra length of refrigerant copper pipes of following sizes (Suction & delivery) of split type AC i/c providing electrical cables, insulation, extra gas charging and covering with PVC non adhessive tape over the insulation of refrigerant pipes and as per the direction of E-in-C

Refrigerant pipes of Sizes 5/8" & 3/8"

Supplying and fixing of 4KVA Voltage Stabilizer Suitable for 01/1.5 ton Air Conditioner as required of Make V Guard Model VND 400 (Voltage Range 150V-285V,12Amps.) or equivalent.

Supplying and fixing of 5KVA Voltage Stabilizer Suitable for 2 ton Air Conditioner as required of Make V Guard Model VND 500 (Voltage Range 150V-285V,15Amps.) or equivalent.

SITC of minimum 3 Ton capacity high wall type split air conditioner, Reciprocating Compressor, 3 Phase,415V) with minimum 10200 Watts cooling capacity MAKE: Blue star Model FMA36AMUP3, or equivalent . (Condenser coil must be of copper material.)

Providing and fixing of refrigerant copper pipes of following sizes (Suction & delivery) of split type AC i/c providing electrical cables,drain pipe, insulation, extra gas charging , cutting, drilling holes on the wall for passing gas pipes , fixing suitable size PVC pipe on the wall through the holes and cementing, painting to give an even look and smooth finish and covering with PVC non adhessive tape over the insulation of refrigerant pipes and as per the direction of E-in-C

Refrigerant pipes of Sizes 3/4" & 1/2"

Supplying and fixing U-PVC trunking with accessories of following size ,Make :- LEGRAND Cat. No. 0104 22 or equivalent of following size with required accessories directly on wall for covering refrigerent pipes, drain pipe and cable etc as per the instruction of E-in-C.

105 mm x 50 mm

Fabrication of stand/Pedestal for keeping the indoor/out door unit of split type AC of various capacity made of suitable size of M S Angle and painting with one coat of red oxide and paint as required.

Providing & Fixing of pre-fabricated stand for keeping outdoor units of 1 Ton/1.5 Ton / 2 Ton Capacity split type AC as required.

ROYAL ENGINEERING WORKS

Hi Tech Engineering and consultancy services