MISC REPAIRS TO PATH, HARD STANDING, COMPOUND WALL, DRAIN AND WIRE FENCING AOR OF AGE B/R CENTRAL UNDER GE DEOLALI

Amount

Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for Autoclaved aerated concrete (AAC blocks) masonry fixed with Ready Mix Jointing Mortar complete all as specied and as directed Makes/brands of Ready Mix Jointing Mortar shall be “Speed Dry Mix”/ “DUBOND”/ “MAGIC BOND”/ BUILDWELL”. Makes/manufacturers of AAC blocks :AEROCON/Ecolite/ ISI marked Grade I as approved by GE

M&L for brick work with fly ash old size bricks, straight or curved on plan n.exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

all as per item No 3 above but except bricks.

M & L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

All as per sr. item No.56 above but except stone

Extra for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to random rubble walling,uncoursed or brought upto courses

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 all as specified.

M & L for provide 12mm thick plaster with ready mix plaster on AAC block/Brick Masonry (Makes/brand- ACC’s “ACCOPLAST”/ CK Birla’s “AEROCEN” / Magic Plast /Speed Dry Mix’s “ ECO PLASTER”complete all as specified and directed

M&L for preparation of surface of wall and applying two coat of exterior weather proof (on putty surface)100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total)

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil.

M & L for cement concrete Type B2 1:4:8 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified.

S & F in repairs galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and directed. (Each line wire to be measured)

Restraining resecuring including making good staples etc. repairs galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standards rails straining bolts including securing or tying at crossing with & provn of galvanized mild steel wire complete all as specified and directed. (Each line wire to be measured)

M & L for RCC 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, stuts etc area exc 100 & not exc 250Sqcm including form work etc complete all as specified:- (Reinforcement shall be measured and paid seperately.)

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.

M&L for Providing, cement concrete type B1 1:2:4 using (20mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses,parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating, all complete all as specified and directed

M&L for cement concrete type B0 (1:2:4) using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any description and in any position complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for .Note- Rate includes for reinforcement cutting as required to facilitate demolition.

M&L for providing RCC (1:2:4) using 20mm graded stone aggregate as in coping, slab supported on wall, beam, lintels etc complete all as directed by Engrin charge.

M & L for Providing precast cement concrete (1:3:6), Type C-1 20mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work)

S&F for 40 to 50 mm thick precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns(1:3:6) TYPE C0 Set in cement mortar1:6 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)

Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. toFe 410-W (Gde- E- 250) quality- A all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size. 300x450x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick backing coat in ement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.incl taking down of existing plaster/tiles/granite

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor etc complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for 16-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M & L for 15 mm thick Artificial Granite (of any type) work steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rubber moulded with grey cement and pigment, including 15mm thick screed in cement mortar 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

M&L for precast cement concrete interlocking tiles 60 mm thick Rubber mould with strength 35 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

Refixing for interlocking tiles obtained from item no 37 laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

M&L for precast cement concrete interlocking tiles 80 mm thick Rubber moulded with strength 40 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

M & L for 15mm th full body vitrified heavy duty tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, including 15mm thick screed in ement mortar 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggreates) set in ement mortar 1:4 as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) complete all as specified and directed.

S & F 10mm dia TMT bars and over cut to lengthbent to shape required including craking bending, spirally for hooping for columns, hooking ends and binding with mild steel wire ( annealed) not less than 0.90mm dia of wire or secruing with clips all.

All as sr. item No. 18 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, spaces etc complete all as directed.

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Dismantling of PVC pipes 100/75 mm bore all as specified and directed.

S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm dia jointed level fixed in floors complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

Ditto all as per sr. item No 46 above but 75 mm dia.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.

M&L of kerb stone 300X125X450 at or near ground level factory made kerb stone of (1;1.5:3) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L of kerb stone 300X100X300at or near ground level factory made kerb stone of (1;1.5:3) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

Preparation of old surface manglore pattern roof tiles/interlocking/chequred tiles and applying 01 coat of tile guard (indigo) paint match to existing colour @1.5kg/sqm complete all as specified

M&L for complete removal of existing treatment of any type / description from kerb stone external/internal/ceilings surfaces /walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed.

M & L for stone surfaces of any description over 10cm in girth or width & applying two coat of synthetic enamel paint over a coat of primer etc complete all as directed.

M & L stone surfaces of any description over 10cm in girth or width & applying one coat of synthetic enamel paint etc complete all as directed.

Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate application of 0.8-1.0 kg/sqm on cement concrete pavement as specified in Table 500-5 of MoRTH specification for building/road and bridge works 2013,using mechanical sprayer complete all as specified and directed

Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.

Removing excavated material but n.exc 50 m and depositing where directed

MAHIMA CONSTRUCTION

M/S MANISH CONSTRUCTION CO

Alpha Construction

AGRAWAL ASSOCIATES

Abhiraj Enterprises

J Sams Contructions

sunway associates

Santhi Enterprises

M/s M R MAHANA