Lighting strengthening work from Tata Gate to Pathauli river on NH 11.

Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100mm, Bottom dia 200 mm and base plate 16mm thik) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 160 watt to 175 watt and Confirming to IP 66 Protection having company Logo engraved complete in all respect including labour. CAT - AAA. 17600-19250 system lumens high power LED with lenses, > 110lm/W, PF>0.95, THD<10% at full load, CRI>70, potted driver set (Not circuitory), phase to phase protection at 440 V & > 300V auto cut and re-start feature, with 5 year warrantee.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 50 sq. mm 3-1/2 core.

25 sq. mm 3-1/2 core.

S/F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. Cat. A.

Supply and fixing of 400 A, 415 V outdoor MSP with fuse base all complete as per direction of E./Ic.

Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

S/F of Fuse section Pillar suitable for 630 Amp fuse box including 3 nos. 630 amp. HRC fuse unit all complete as complete as per DVVNL & TPL design.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Making suitable earthing of ST/Rail Pole with 2.5 M long 20 mm dia M.S Rod with 7/16 SWG GS wire in 15 mm dia 2.0 M long GI pipe duly clamped with 2 nos. of clamps and binding on pole including cost of labour & T&P etc required for proper completion of work.

Supply and Wiring of submains with two nos. of 2.5 sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge.