Improvement works to the Medical and Surgical Blocks of CHPA Hospital at Chennai Port (CHPA), Chennai (T.N)

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

1 Schedule A1- Civil works -Medical Block

1. Dismantling the existing Nominal concrete 1:3:6 or richer mix including equivalent design mix to the required level, size 1M3

1.01 and shape wherever required without damaging the nearby structures if any, and depositing the debris within a lead of 50m for retransportation and (One Cubic

disposal all as per relevant specification and all as directed at site of work including all labour, tools, equipment, fuel, transport, etc., metre) 27.00 2,653.82 71,653.14

2. Dismantling / cutting the existing RCC members at Ground floor including stacking the steel without disturbing near by structure 1M3

and conveying and handing over the serviceable materials, if any, to the departmental stores and wherever required including collecting (One Cubic

and depositing the Debris in Ground level with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, metre)

tools, equipments, transport, fuel etc., complete. 0.50 3,870.40 1,935.20

3. Dismantling and removing the existing damaged brick work in cement mortar by manually/mechanical means wherever required 1M3

1.03 without damaging the nearby structures including collecting and bringing down down the debris to the ground level and depositing the debris (One Cubic

within a lead of 50m for disposing all as specified and as directed at site, including all labour, tools, tackles, equipments, fuel, scaffolding, metre) 23.00 2,245.54 51,647.42

4. Dismantling and removing the existing IWC / EWC with tank, W.C.Pan from Toilet without disturbing the existing structure near 1No (One

by including collecting and depositing the debris within a lead of 50m all as directed including all labour, tools, equipments, etc., complete. Number) 64.00 146.20 9,356.93

5. Removing the existing damaged wash hand basin with all accessories without disturbing the near by structure and handing over the 1No (One

1.05 serviceable materials, if any, to the department stores/ RSD and bringing down the debris to the ground level and depositing with in a lead of Number)

50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. 19.00 161.66 3,071.54

6. Removing the existing damaged Urinal with all accessories without disturbing the near by structure and handing over the 1No (One

1.06 serviceable materials, if any, to the department stores and bringing down the debris to the ground level and depositing with in a lead of Number)

50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. 15.00 146.20 2,193.03

7. Dismantling AC sheet/Galvalume sheet roofing including ridges, hips, valleys and gutters etc., without disturbing near by structure and 1M2

conveying and handing over the serviceable materials, if any, to the departmental stores and bringing down the debris to the ground level for (One square

disposal and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, metre)

transport, fuel, etc., complete. 9.00 85.79 772.07

8. Dismantling and removing the existing worn-out wooden/PVC doors etc., including frame with shutters in all floors without 1No.

damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all (One number)

as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete.

1.09 B). Area More than 3 M2 1No.

9. Dismantling and removing the existing worn-out wooden / Aluminium Windows / Ventilators etc., including frame with shutters in all floors 1No.

without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all as (One number)

specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete.

1.11 b). Area More than 3 M2 1No.

1.12 c). Ventilators Area Less than 3 M2 1No.

10. Dismantling and removing the existing Gypsum board / hard board / thermocole false ceiling with frames, clamps etc., 1M2

without damaging the adjoining structures, transporting and handing over the unserviceable materials to departmental stores/ RSD yard and bringing (One square

down the debris to the ground level and depositing within a lead of 50m for disposal, all as directed including all labour, tools, equipment, metre)

scaffolding, transport, fuel, etc., complete. 1,305.00 61.48 80,228.79

11. Dismantling and removing aluminium/ Gypsum / wooden partitions wherever required without damaging the near by 1M2

structures including bringing down the same to ground level, collecting and stacking the unwanted materials within a lead of 50m for disposal and (One square

handing over the retrived materials to RSD yard within a lead of 2kms all as specified and as directed at site of work including all labour, metre)

tools, equipments, transport, fuel, scaffolding etc., complete. 480.00 63.13 30,302.40

12. Dismantling and removing the existing damaged floor plastering/floor tiles/mosaic/ Cuddappah stone in Cement Mortar 1M2

to the required thickness wherever required without damaging the structures nearby, including collecting and bringing down the debris to (One square

the ground level and depositing within a lead of 50m for disposal, all as directed at site of work, including all labour, tools, metre)

equipments, transport, fuel, etc., complete 1,420.00 80.00 1,13,605.68

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

13. Dismantling the existing wall tile dadooing including base mortar to the required thickness from the walls and wherever 1M2

1.16 required to receive new finish including collecting and depositing the debris to the ground level within a lead of 50m all as directed including all (One square

labour, tools, equipments, etc., complete. metre) 1,470.00 59.59 87,597.30

14. Dismantling the existing Brick jelly lime concrete in sunken portion of toilet area wherever required without damaging 1M3

the nearby structures to the required level, size and shape and making good the disturbed portions if any, including collecting and (One Cubic

bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as per relevant specification and as metre)

directed at site, including all labour, tools, equipment, transport, fuel, etc., complete. 55.00 928.66 51,076.30

15. Preparing the surfaces of the sunken portion of toilet area wherever required and plastering with C.M 1:3 (1cement: 3 CS sand) 1M2

1.18 20mm thick with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement all as per relevant standards and (One square

specifications and all as directed at site of work including, curing, all materials, labour, tools, equipments, transport, fuel, etc., complete. metre) 280.00 650.18 1,82,050.40

16. Providing and laying brick jelly cement concrete in mix 1:5:10 (1 cement :5 CS sand :10 broken brick aggregate of 40mm nominal size ) in 1M3

1.19 volumetric proportions for sunken portions of the toilets to the required levels all as per relevant standards and specifications including (One Cubic

mixing, transporting, placing, consolidating, curing etc., all as directed including cement and all other materials, labour, tools, equipments, etc., metre) 55.00 5,868.14 3,22,747.70

17. Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm or nearest size (thickness to be specified by the manufacturer), 1M2

of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 (One square

1.2 mm thick bed of cement mortar 1:4 (1 Cement : 4 Crushed stone sand), jointing with grey cement slurry @ 3.3 kg/ sq.m , complete and metre)

joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work including cement

and all other materials, labour, tools, equpiments, etc., complete. 202.00 1,433.70 2,89,607.40

18. Chipping thoroughly the existing damaged plastering from walls to receive new finish wherever required without damaging the 1M2

1.21 nearby structures including conveying the debris to the ground level and depositing within a lead of 50m for disposal all as directed (One square

including all labour, tools, equipments, scaffolding etc., complete. metre) 1,630.00 3.78 6,154.88

19. Providing and fixing wall Dadooing using 1st quality ceramic glazed tiles of size 300mm x 200mm or of nearest size as available in 1M2

1.22 the market conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make and approved colour and shade set in cement (One square

mortar 1:3 (1cement: 3 fine CS sand), 12mm thick and joints neatly pointed with white cement added with pigment to match the colour of the tiles, metre)

curing all as directed at site of work including cement and all materials, labour, tools, equpiments, transport, fuel, etc., complete. 1,630.00 1,382.96 22,54,224.80

20. Providing flooring with good quality Vitrified Tiles (Double Charge) of size 600mm x 600mm or of nearest size as available in 1M2

the market of 10 mm Nominal thickness set in cement mortar 1:4 (1 cement : 4 clean fine CS sand) 20 mm average thick with required (One square

slope fixed with neat cement slurry,and joints neatly pointed with white cement added with pigment to match the colour of the tiles,curing all as metre)

directed including cement and all other materials labour,tools, equipments , etc., complete 975.00 1,693.30 16,50,967.50

21. Refilling with available excavated earth excluding boulders, rubbish, debris, etc., wherever required in layers not exceeding 200 mm 1M3

1.24 thick and as directed at site, including consolidating the deposited earth in layer by watering and ramming including all labour, tools, (One Cubic

equipment, etc., complete metre) 1.00 213.70 213.70

22. Providing and laying plain cement concrete of mix 1:4:8 (1cement :4 CS sand: 8 hard granite graded stone aggregate of 40mm 1M3

nominal size) in volumetric proportion for levelling course wherever required including shuttering, mixing, transporting, placing, (One Cubic

consolidation by ramming, curing etc., all as per relevant standards and specifications all as directed at site of work including cement, metre)

all materials, labour, tools, equipments, transport, fuel, etc., complete. 22.00 7,424.56 1,63,340.32

23. a). Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered 1M2

frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles (One square

and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel metre)

section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where

ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

1.26 caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically

jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap

between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all

complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement

and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Three track three panels sliding window with

Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R3 series with frame (98mm & above) x (40mm & above) & sash

(30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system 497.00 9,311.38 46,27,755.86

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

23. b). Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 1M2

60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are (One square

multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. metre)

The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window

should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved

from the Executive Engineer before use on work 13.00 9,565.08 1,24,346.04

24. Providing Half brick work using bricks of class designation 50 set in cement mortar 1:4 (1 Cement: 4 CS sand) in footh path, kitchen 1M2

1.28 platform, partition in ground level upto fifth floor level and wherever necessary, all as directed at site of work, including scaffolding, labour, (One square

materials, Cement, tools, curing, etc., complete. metre) 10.00 1,224.84 12,248.40

25. Preparing the surfaces of walls and plastering in cement mortar 1:5 (1 cement 1M2

1.29 : 5 CS sand), 12mm thick to the required finish wherever required all as directed at site of work, including cement and other materials, (One square

labour, tools, equipments, scaffolding, curing etc., complete. metre) 15.00 381.73 5,725.95

26. Providing and fixing granite slab of 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine 1M2

cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of colour black, Cherry/Ruby red (One square

1.3 approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 CS sand), joints treated with white cement, metre)

mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc.

complete at all levels including all materials, labour, tools, equipments, curing etc., complete. 5.00 5,900.00 29,500.00

27. Preparing the surfaces of old wooden members and applying two coats of synthatic enamel paint (Asian / Nippon / Berger or 1M2

equivalent) of approved brand and colour of good quality to give an even shade all as directed at site of work including all labour, (One square

materials, tools, tackles, equipments, brushes, scaffolding, etc., complete. NOTE: 1. Necessary painting co-efficient shall be allowed as per Ch.P.A. metre)

engineering manual. 2. The above quantity is inclusive of painting co-efficient. 520.00 112.04 58,261.32

28. Providing and fixing SFRC (Steel Fiber Reinforced Concrete) Manhole cover with frame of size 600 x 600 mm for Manhole and 1No.

wherever required in mix 1:1.5:3 ( 1 cement : 1.5 C.S.sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric (One number)

proportions to the required size, all as per relevant specifications, drawings and as directed including necessary form work, mixing,

transporting, placing, compacting, curing, finishing the exposed concrete surface with neat cement punning at 2.2 kg/Sq.m as directed,

including removing the existing damaged manhole cover, lifting, handling, transporting and placing the cover over the frame in correct

position and alignment, providing necessary lifting holes including all materials, labour, tools, plants, equipments, fuel, etc., complete. 2.00 3,187.18 6,374.36

29. Dismantling of Gully trap including chamber wherever required without damaging the structures nearby and collecting, stacking 1No.

the debris within a lead of 50m for disposal all as directed at site of work including costs of all labour, tools, equipments, etc., complete. (One number) 5.00 146.20 731.01

30. Providing and fixing Gully trap including constrcution of Chamber of size 30x30x50 cm inside, in brick work in cement mortar 1No.

1:4 (1 cement :4 CS sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced cement (One number)

concrete slab 1:1.5:3 mix (1 cement : 1.5 CS sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation,

foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement

mortar 1:3 (1 cement : 3 crushed stone sand) 12mm thick, finished with a floating coat of neat cement all as directed at site of work

including all labour, materials, tools, tackles, equipments, brushes, etc., complete. 10.00 3,003.10 30,031.00

31. Earth work excavation upto 1.50m in ordinary soil, sand, clay mixed with roots, boulders weighing individually less thasn 250kg debris, 1M3

rubbish etc., as existing at site of work for all foundations and other such works as directed including dressing of sides ramming of bottom all as (One Cubic

per relevant specification and as directed at site, depositing the excavated earth within a lead of 50m for transportation including metre)

shoring, strutting, all labour, tools, tackles, equipments, fuel, etc., complete. 21.00 283.79 5,959.59

32. Providing and laying reinforced cement concrete of mix 1:1.5:3 (1 cement:1.5 CS sand:3 hard graded stone aggregate of 20mm 1M3

nominal size) in volumetric proportions for Drain Side Walls and wherever required all as per relevant specification and as directed at site of (One Cubic

work including cement, mixing, transporting, placing, vibrating,ramming, consolidating, curing, shuttering, all materials, labour, tools, metre)

plants, equipments, fuel, etc., complete. 11.00 11,567.54 1,27,242.94

33. Casting, transporting and placing RCC pre cast cover slabs 100 mm thick in mix 1:1.5:3 (1 cement : 1.5 CS sand : 3 hard granite 1M3

stone graded aggregate of 20mm nominal size) in volumetric proportion including formwork, mixing, transporting, placing, consolidating, (One Cubic

1.37 etc., including finishing the exposed surfaces with a floating coat of neat cement punning 2.2kg/sqm and as directed including necessary metre)

curing, handling, placing and fixing in position and all other materials, labour, tools, equipments etc., complete. Note: Supplying and

fabrication of steel reinforcement will be measured and paid seprately under the relevant item. 9.00 19,492.42 1,75,431.78

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

34. Supplying, fabricating and placing in position HYSD (Fe 500/ 550 grade) TMT steel bars as reinforcement for all RCC works wherever 1 Kg (One Kilo

required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per Gram)

relevant specification, drawings and as directed, including all materials, labour, tools, equipment, transport, fuel, etc., complete. Note: 1.The rate shall

be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured for 3,000.00 117.53 3,52,584.00

35. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & 1 RM

other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate (One Running

and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with Meter)

miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750

kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of

elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire

retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-

Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 174.00 1,010.08 1,75,753.92

36. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 1M2

30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice (One square

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and metre)

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2

and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing

with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction

of Engineer-In- Charge and as directed at site of work including transporting, placing, all materials, labour, tools, plants, equipments, fuel, etc.,

37. Providing and fixing IS : 12817 marked stainless steel fittings (heavy weight) with stainless steel screws for doors, etc., as 1No.

1.41 directed at site of work with the approval of engineer in charge, including all materials, labour, tools, equipments, etc. complete (One number)

1.42 b) Tower bolt 150 mm 1No.

1.43 c) Tower bolt 75mm 1No.

1.44 d) Aldrop 250mm 1No.

1.45 e) 125mm Handle 1No.

38. Preparing the surfaces of existing ceiling etc., and applying one coat of white washing with premium acrylic emulsion 1M2

paint of interior grade, (Asian / Nippon / Berger or equivalent) having VOC (Volatile Organic Compound ) content less than 50 grams/ (One square

litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour all as metre)

directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safety belts, safety helmets, 1,280.00 104.08 1,33,217.28

39. Preparing the surfaces of existing interior walls etc., and applying two coats of Colour washing with premium acrylic emulsion 1M2

paint of interior grade, (Asian / Nippon / Berger or equivalent) having VOC (Volatile Organic Compound ) content less than 50 grams/ (One square

litre of approved brand and manufacture, including one coat of interior primer wherever required to achieve even shade and colour all metre)

as directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safety belts, safety helmets, 2,015.00 197.53 3,98,026.98

40. Providing and fixing White vitreous china Orissa pattern W.C pan of size 580x 1No.

440 mm with integral type foot rest squatting pan (Indian Type WC Pan) Parryware/Hindware/ jaquar or equivalent with 100 mm (One number)

1.48 sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, incluing flush pipe, with manually controlled device (Handle lever)

conforming to IS :7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required,

all as directed at site of work including all materials, labour, tools, equipments, etc., complete. 50.00 7,376.18 3,68,809.00

41. Providing and fixing white vitreous china pedastal type water closet ( European type W.C pan) Parryware/Hindware/ jaquar or 1No.

equivalent with seat and lid (One number)

1.49 , 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device(Hnadle lever) conforming to IS : 7231,

with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, all as directed at site of

work including all materials, labour, tools, equipments, etc., complete. 15.00 7,101.24 1,06,518.60

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

42. Providing and fixing good quality vitreous white wash hand basin of size 550x 400 mm or nearest size as available in the 1No.

market ( Parryware/Hindware/ jaquar or equivalent) with single 15mm C.P brass pillar tap. CP waste fitting , 32mm dia cp brass union, 15 (One number)

mm dia PVC inlet connection, 32mm dia pvc waste pipe fittings, a pair of cast iron brackets etc as available in the market suitable for fixing the

wash hand basin, including painting the brackets etc with two coats of synthetic enamel paint over one coat of primer fixing the brackets

with teak wood plug and making good the disturbed portion, etc., all in sound working condition all as per relevant specification and

as directed including all materials, labour, tools,equipments,etc., complete. 25.00 2,048.48 51,212.00

43. Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm sizes or as available in the 1No.

market (Parryware/Hindware/ jaquar or equivalent) as per manufacturers specification with PVC flexible flush pipe with clamp, teakwood plugs, (One number)

screws with all fittings and fixtures for inlet and outlet arrangements etc., all as per relevant secification and as directed at site in sound

working condition, including all materials, labour, tools, equipment, etc., complete. 15.00 1,797.14 26,957.10

44. Dismantling and Removing the existing damaged PVC / Cast Iron / GI pipes with all accessories, wherever required without damaging 1 RM

near by structures including collecting and stacking the dismantled pipes within a lead of 50m for disposal , transporting and handing (One Running

over the unserviceable materials to departmental stores/ RSD yard all as specified and as directed at site of work including all labour, tools, Meter)

tackles, equipments, scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety nets etc., complete. 360.00 5.07 1,826.64

45. Removing the existing damaged taps, wall mixture, shower arm with shower rose, Health facuet, angle cock etc., with all 1No.

1.53 accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores, all (One number)

as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. 50.00 13.87 693.25

46. Supplying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply (Varun / 1 RM

Finolex / Trubore or equivalent) for external / internal works exposed on wall with CPVC plain & brass threaded fittings, including fixing (One Running

the pipe with clamps at 1.00 m spacing with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., jointing of Meter)

pipes & fittings with one step CPVC solvent cement and testing of joints and including punching the masonry/concrete wherever required and

making good the disturbed portions, all as per relevant specification and directed at site of work, labour, tools, equipments, scaffolding etc.,

46.b) 25mm dia. 1 RM

1.55 (One Running

46.c) 20mm dia. 1 RM

1.56 (One Running

46.Providing and fixing First quality Gun metal gate valve (Full way valve with Handle) of following sizes to the water pipe lines in 1No.

all floors in sound working condition by removing the existing wheel valve including making the joints water tight and testing etc., all as (One number)

directed at site of work including all materials, labour, tools, equipments, etc., complete.

47. Providing, fixing and laying of pipes on floors of, approved quality rigid PVC pipes of 75/110mm outside diameters 6 Kgf/sq.cm 1 RM

pressure-(Finolex (or) Trubore (or) Varun (or) Supreme or equivalent) for waste water lines/sewage lines including necessary specials like (One Running

bends, tees, elbows, clamps and specials, etc., wherever required, including joining the pipes using necessary adhesives, and Meter)

making connections to floor traps, gully traps manholes etc., including cutting the floor concrete masonry and making good the

disturbed portions all as directed at site of work including all materials, labour, tools, equipments, scaffolding, cement etc., complete.

b). 75mm Dia 1 RM

1.6 (One Running

48. Providing and fixing 110mm dia PVC Nahani trap (floor trap with gratings suitable for PVC drainage pipe) embedding the trap 1No.

making the joints water tight etc., all as directed including all materials, labour, tools, equipments etc., complete. (One number) 40.00 283.79 11,351.60

49. Supplying and fixing the sanitary fittings with First quality C.P fittings (Parryware/Hindware/ jaquar /Metro or equivalent) in 1No.

toilets in sound working condition including testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., (One number)

a) Health Faucet 15.00 948.72 14,230.80

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

1.63 b) Short body Tap 15mm dia conforming to IS:8931 1No.

1.64 c) Stop cock 15mm dia (concealed) conforming to IS:8931 1No.

1.65 d) 32mm size PTMT Bottle Trap 1No.

1.66 e) Angle valve 15mm dia 1No.

1.67 f) Long body Tap(Bib Cock) 15mm 1No.

50. Loading, transporting, dumping and leveling the surplus earth and debris etc., within a lead of 3 kms outside the Port premises all as per 1M3

relevant specifications and as directed including all labour, transport, tools, equipments, fuel, etc., complete. Note:1.The tenderer shall maintain trip (One Cubic

sheets in triplicate in Trust's approved format at his own cost. metre)

2.Payment will be based on the lorry cubical content. No deduction of voids for debris will be

4. 20% deduction of voids for surplus earth will be made. However the final quantity will be restricted to

actual quantity of debris dismantling

/demolishing items.

(a) Surplus Earth 50.00 298.54 14,927.00

1.69 (b) Debris 1M3

51. Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia 1M2

M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps (One square

and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved metre)

and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required

1.7 for inspection of work at required locations with essential safety features for the workmen, including removing the scaffolding with platform

after completion of works all as directed at site of work including all labour materials tools equipments transport fuel etc complete..

The elevational area of the scaffolding shall be measured for payment purpose.

Note (1) 75% of payment may be relaeased after erecting of scaffolding in all respect.

(2) The balance 25% of payment may be released after completion of improvement works and removal of scaffolding 1,830.00 368.75 6,74,812.50

52. Supplying diluting and injecting chemical emulsion for post constructional anti termite treatment with chlorpyrlphos 1M2

Emulsifiable concentrate with 1% concentration (i.e. one litre of chemical for every 20 litires of emulsion) in soil along internal and (One square

external wall using chemical emulsion at 2.25 litire per linear metre inlcuding drilling and plugging holes etc. and treating the soil under floors, metre)

1.71 masonry / concrete inside and outside of buildings wherever required, using chemical emulsion at 1 litre per hole at 30cm interval including

drilling 12mm dia holes and plugging them with cement mortar 1:2 to the full depth of the hole and treating the points of contact of wood

work by chemical emulsion (in oil of kerosene based solution) at 0.5 litres per hole by drilling 6mm dia at downward angle of 45 degree

at 150mm c/c and sealing the same and as directed including all material (including cement) labour, tools, scaffolding, ladder, equipments etc. 1,830.00 139.71 2,55,672.96

53. Supplying, fabricating and fixing the M.S gate, window / Ventilator grill, Ladder as per existing or as directed at site using 1 Kg (One Kilo

structrual steel, etc., using as verticles, horizontals and diagonal members, including fixing including cutting the flats, bars, etc., to the reqired Gram)

length, welding the joints all as directed at site of work , providing scaffolding, fixing in proper alignment, all as directed at site of work

including applying a priming coat of approved steel primer all materials, labour, tools, transport, equipments, fuel, etc., complete.

1. The payment is based on the total weight of the MS flats, bars, etc., as fabricated.

2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment.

etc., will be borne by the contractor. 500.00 189.04 94,518.00

Total Amount of Schedule - A1 Civil Works -Surgical Block 1,43,02,472.61

Total Amount of Schedule - A1 Civil Works -Surgical Block 1,43,02,472.61

2 Schedule - A2 Civil Works -Surgical Block -

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

1.Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1M2

1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase (One square

system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it metre)

thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at

required locations with essential safety features for the workmen, including removing the scaffolding with platform after completion of works all as

directed at site of work including all labour materials tools equipments transport fuel etc complete.. The elevational area of the scaffolding shall be

measured for payment purpose.

Note (1) 75% of payment may be relaeased after erecting of scaffolding in all respect. 1,900.00 368.75 7,00,625.00

2. Dismantling and removing the existing damaged floor plastering/floor tiles/mosaic/ Cuddappah stone in Cement Mortar to 1M2

the required thick wherever required without damaging the structure nearby, including collecting and bringing down the debris to the ground (One square

level and depositing within a lead of 50m for disposal, all as directed at site of work, including all labour, tools, equipments, transport, fuel, metre)

3. Dismantling and removing the existing wall plastering / tile dadoing including base mortar to the required thick from the walls wherever 1M2

2.03 required to receive new finish including collecting and depositing the debris to the ground level within a lead of 50m all as directed (One square

including all labour, tools, equipments, transport, fuel, etc., complete. metre) 950.00 59.59 56,610.50

4. Dismantling and removing the existing worn-out wooden/ PVC doors/ windows/ ventilators etc., including frame with 1No.

shutters in all floors without damaging the structures nearby, including transporting and handing over the same to departmental stores / RSO (One number)

yard within a lead of 3km all as specified and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete.

2.05 b). Area More than 3 M2 1No.

c).Dismantling and removing the existing wornout wooden/Aluminium partition etc., including frame with shutters and handing over 1M2

the same to departmental stores/RSD yard within a lead of 3km, without damaging the adjoining structures, and bringing down the debris to the (One square

ground level and depositing within a lead of 50m for disposal, all as directed including all labour, tools, equipment, scaffolding, transport, metre)

fuel, etc., complete. 30.00 63.13 1,893.90

5. Dismantling and removing the existing Gypsum board / thermocole false ceiling with frames, clamps etc., without damaging 1M2

the adjoining structures, transporting and handing over the unserviceable materials to departmental stores/ RSD yard and bringing down the (One square

debris to the ground level and depositing within a lead of 50m for disposal, all as directed including all labour, tools, equipment, metre)

scaffolding, transport, fuel, etc., complete. 990.00 61.48 60,863.22

6. Dismantling and Removing the existing damaged PVC / Cast Iron / GI pipes with all accessories, wherever required without damaging 1 RM

near by structures and handing over the unserviceable materials to departmental stores / RSD yard including collecting and stacking the dismantled (One Running

pipes within a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, tackles, equipments, Meter)

scaffolding, transport, fuel, safety ladder, safety belts, safety helmets, safety nets etc., complete. 650.00 5.07 3,298.10

7. Dismantling and removing the existing IWC / EWC with floor concrete from Toilet without disturbing the existing structure near 1No (One

by including collecting and depositing the debris within a lead of 50m all as directed including all labour, tools, equipments, etc., complete. Number) 40.00 146.20 5,848.08

8. Removing the existing damaged Urinal with all accessories without disturbing near by structure and bringing down the debris to the 1No (One

2.1 ground level and depositing with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, Number)

9. Removing the existing damaged wash hand basin with all accessories without disturbing near by structure and conveying and 1No (One

2.11 handing over the serviceable materials, if any, to the department stores/ RSD yard and bringing down the debris to the ground level and depositing Number)

with in a lead of 50mts for disposal, all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. 65.00 161.66 10,507.90

10. Dismantling / cutting the existing RCC members at all floors including stacking the steel without disturbing near by structure 1M3

and conveying and handing over the serviceable materials, if any, to the department stores and wherever required including collecting and (One Cubic

depositing the Debris in Ground level with in a lead of 50m for disposal all as specified and as directed at site of work including all labour, tools, metre)

equipments, transport, fuel etc., complete. 3.50 3,870.40 13,546.40

11. Dismantling the existing Plain cement concrete in Rich mix to the required level, size and shape wherever required without damaging the 1M3

2.13 nearby structures if any, and depositing the debris within a lead of 50m for retransportation and disposal all as per relevant specification and all as (One Cubic

directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete. metre) 1.00 2,653.82 2,653.82

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

12. Dismantling the existing Plain cement concrete in lean mix to the required level, size and shape wherever required without damaging the 1M3

2.14 nearby structures if any, and depositing the debris within a lead of 50m for retransportation and disposal all as per relevant specification and all as (One Cubic

directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete. metre) 3.00 1,638.67 4,916.00

13. Dismantling and removing the existing damaged brick work in cement mortar by manually/mechanically wherever required 1M3

without damaging the nearby structures including collecting and bringing down the debris to the ground level and depositing the debris within (One Cubic

a lead of 50m for disposing all as specified and as directed at site, including all labour, tools, tackles, equipments, fuel, scaffolding, etc., metre)

14. Dismantling and removing the existing wornout MS grill, MS gates, window grill, ventilators grill etc without damaging the 1Kg

2.16 structures nearby, including transporting and handing over the same to departmental stores / RSO yard within a lead of 3km all as specified (One Kilo

and as directed at site of work including all labour, tools, equipments, transport, fuel etc., complete. Gram) 2,700.00 4.25 11,469.60

15. Dismantling the existing Brick jelly lime concrete / Cement Concrete in sunken portion of toilet area wherever required 1M3

without damaging the nearby structures to the required level, size and shape and making good the disturbed portions if any, including (One Cubic

collecting and bringing down the debris to the ground level and depositing within a lead of 50m for disposal, all as per relevant specification metre)

and as directed at site, including all labour, tools, equipment, transport, fuel, etc., complete. 10.00 928.66 9,286.60

16. Removing the existing damaged taps, wall mixture, shower arm with rose, Health facuet, angle cock, towel rod, etc., with all 1No.

2.18 accessories without disturbing near by structure and conveying and handing over the serviceable materials, if any, to the department stores /RSD, (One number)

all as directed at site of work including all labour, tools, equipments, transport, fuel, etc., complete. 375.00 13.87 5,199.38

17. Earth work excavation in ordinary soil, sand, clay mixed with roots, boulders weighing individually less than 250kg debris, rubbish 1M3

etc., as existing at site of work for all foundations and other such works up to 1.50m depth including dressing of sides ramming of bottom (One Cubic

all as per relevant specification and as directed at site, depositing the excavated earth within a lead of 50m for transportation metre)

including shoring, strutting, all labour, tools, tackles, equipments, fuel, etc., complete. 5.00 283.79 1,418.95

18. Refilling with available excavated earth excluding boulders, rubbish, debris, etc., wherever required in layers not exceeding 200 mm 1M3

2.2 thick and as directed at site, including consolidating the deposited earth in layer by watering and ramming including all labour, tools, (One Cubic

equipment, etc., complete metre) 3.00 213.70 641.09

19. Providing and laying plain cement concrete of mix 1:4:8 (1cement :4 Crushed stone sand: 8 hard granite graded stone aggregate of 40mm 1M3

nominal size) in volumetric proportion for levelling course wherever required including shuttering, mixing, transporting, placing, (One Cubic

consolidation by ramming, curing etc., all as directed at site of work including cost of cement, all materials, labour, tools, equipments, metre)

transport, fuel, etc., complete. 2.00 7,424.56 14,849.12

20. Providing Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work 1M3

including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:5 (1 cement : 5 CS sand) for raising (One Cubic

walls in all floors upto fifth floor level and wherever required, all as per the details and as specified in the relevant schedule and as directed at metre)

site of work including scaffolding, curing, cement, all other materials, labour, tools, equipments, transport, fuel, etc., complete. 6.00 10,407.60 62,445.60

21. Providing Half brick work with common burnt clay (non-modular) bricks of class designation 7.5 set in cement mortar 1:4 (1 1M2

2.23 Cement: 4 CS sand) in toilet / bathroom / partition in ground level upto fifth floor level and wherever necessary, all as directed at site of (One square

work, including scaffolding, labour, materials, Cement, tools, curing, etc., complete. metre) 25.00 1,224.84 30,621.00

22. Providing Brick pillaster with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up 1M3

2.24 to floor V level in CM 1:4 (1 cement : 4 CS sand) wherever required, all as directed at site of work including cost of cement , all materials, labour, (One Cubic

tools, equipments, scaffolding, curing, transport, fuel, etc., complete metre) 3.50 10,184.58 35,646.03

23. Casting, transporting and placing RCC pre cast cover slabs of various thickness more than 40 mm thick in mix 1:1.5:3 (1 1M3

cement : 1.5 CS sand : 3 hard granite stone graded aggregate of 20mm nominal size) in volumetric proportion including formwork, (One Cubic

mixing, transporting, placing, consolidating, etc., including finishing the exposed surfaces and as directed including necessary form work, metre)

curing, handling, placing and fixing in position with CM 1:3 (one cement : three fine CS sand) including cost of cement and all other

materials, labour, tools, equipments etc., complete.

Note: Supplying and fabrication of steel reinforcement will be measured and paid seprately under the relevant item. 2.00 15,001.34 30,002.68

24. Providing and laying plain cement concrete of mix 1:1.5:3 (1 cement:1.5 CS sand:3 hard graded stone aggregate of 20mm nominal 1M3

2.26 size) in volumetric proportions wherever required all as per relevant specification and as directed at site of work including mixing, (One Cubic

transporting, placing, vibrating, ramming, consolidating, curing, shuttering, including cost of cement all materials, labour, tools, plants, metre) 2.00 9,090.72 18,181.44

25. Providing and laying plain cement concrete of mix 1:2:4 (1 cement: 2 CS sand:4 hard graded stone aggregate of 20mm nominal 1M3

2.27 size) in volumetric proportions wherever required all as per relevant specification and as directed at site of work including mixing, (One Cubic

transporting, placing, vibrating, ramming, consolidating, curing, shuttering, including cost of cement, all materials, labour, tools, plants, metre) 2.00 8,479.48 16,958.96

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

26. Supplying, fabricating and placing in position HYSD (Fe 500/ 550 grade) TMT steel bars as reinforcement for all RCC works wherever 1 Kg (One Kilo

required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per Gram)

2.28 relevant specification, drawings and as directed, including all materials, labour, tools, equipment, transport, fuel, etc., complete.

Note: (i) The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not

be measured for payment purpose. 200.00 117.53 23,505.60

27. Supplying, fabricating and fixing the M.S gate, window / Ventilator grill, Ladder, etc., as per existing or as directed at site 1 Kg (One Kilo

using suitable MS Square bars, MS Square sections, MS Flats, M.S.sheet, etc., using as verticles, horizontals and diagonal members, including Gram)

cutting the flats, bars, etc., to the reqired length, welding the joints all as directed at site of work providing scaffolding, fixing gate

in proper alignment including applying one coat of red oxide primer all as directed at site of work including all materials, labour, tools, transport,

2.29 equipments, fuel, etc., complete.

1. The payment is based on the total weight of the MS flats, bars, etc., as fabricated.

2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment.

etc., will be borne by the contractor. 2,700.00 189.04 5,10,397.20

28. Preparing the surfaces of the floor area wherever required and plastering with 1M2

2.3 C.M 1:3 (1cement: 3 fine CS sand) 20mm thick all as per relevant specifications and all as directed at site of work including, curing, cost of (One square

cement, all materials, labour, tools, equipments, transport, fuel, etc., complete. metre) 1,250.00 640.74 8,00,925.00

29. Preparing the surfaces of the floor area wherever required and plastering with 1M2

C.M 1:3 (1cement: 3 fine CS sand) 20mm thick with water proofing compound of integral water proofing liquid admixture conplast ( (One square

160ml / 50kg of cement) all as per relevant specifications and all as directed at site of work including, curing, cost of cement, all materials, metre)

labour, tools, equipments, transport, fuel, etc., complete. 180.00 650.18 1,17,032.40

30. Preparing the surfaces of walls and plastering in cement mortar 1:5 (1 cement 1M2

2.32 : 5 fine CS sand), 12mm thick to the required finish all as directed at site of work, including cost of cement and other materials, labour, (One square

tools, equipments, scaffolding, curing etc., complete. metre) 1,200.00 381.73 4,58,076.00

31. Preparing the surfaces of ceiling and plastering in cement mortar 1:3 (1cement : 3 clean fine CS sand) 6 - 10 mm thick to the 1M2

2.33 required finish, all as directed at site of work including all labour, cement, materials, tools, equipments, scaffolding, curing, etc. complete. (One square

32. Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm or nearest size (thickness to be specified by the 1M2

manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red (One square

2.34 Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 CS sand), jointing with grey cement slurry @ 3.3 kg/ sq.m , metre)

complete and joints neatly pointed with white cement added with pigment to match the colour of the tiles, curing all as directed at site of work

including cement and all other materials, labour, tools, equpiments, etc., complete. 180.00 1,433.70 2,58,066.00

33. Providing and laying Ceramic glazed wall dadooing / skirting with tiles conforming to IS : 15622, of approved make, in all 1M2

colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 CS sand), and (One square

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, all as directed at site of metre)

work including all materials, labour, tools, equpiments, scaffolding, curing, etc., complete. 750.00 1,382.96 10,37,220.00

34. Providing and laying Vitrified Tile flooring (Double Charge) of size 600mm x 600mm or nearest size with water absorption less 1M2

than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 (One square

CS sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and pigments to match the colour metre)

of the tiles, all as directed including cost of cement and all other materials, labour,tools, equipments, curing etc., complete 1,250.00 1,693.30 21,16,625.00

35. Providing and fixing granite slab of 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for cupboard, 1M2

shelves, racks and similar locations of required size of colour black, Cherry/Ruby red approved shade, colour and texture laid over 20 mm thick base (One square

cement mortar 1:4 (1 cement : 4 CS sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including metre)

rubbing, curing, moulding and polishing of edges, etc. complete at all levels including all materials, labour, tools, equipments, curing etc., 10.00 5,900.00 59,000.00

36. Providing edge moulding to 18 mm thick granite stone for cupboard, shelves, racks and similar locations etc., including machine 1 RM

2.38 polishing to edge, etc., all as directed at site of work including all materials, labour, tools, equipments, curing etc., complete. (One Running

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

37. Providing and fixing sal/padak wood frame for doors / windows / ventilators with necessary M.S. hold fasts / clamps of size 1M3

40x5x400mm long fixed suitably to the masonry / concrete including cutting pockets and grouting with plain cement concrete 1:3:6 (1 cement : 3 CS (One Cubic

2.39 sand : 6 hard granite graded stone aggregate of 20mm nominal size) in volumetric proportions, curing including oil type wood preservative of metre)

approved brand and manufacture on the portions of the timber abutting against masonry / concrete all as directed at site of work including

cement and all other materials, labour, tools, scaffolding equipment, etc., complete. 0.55 1,79,979.03 98,988.47

38. Providing and fixing Second class teak wood shutter frame with wood panelleing /glazed shutters 30mm thick for 1M2

doors, windows / cupboard etc., including top rail, bottom rail, lock rail etc., all as per relevant specifications as directed at site (One square

2.4 of work including all materials, labour, tools, equipments, transport, fuel etc., complete. metre)

Necessary fixtures like butt hinges, Aldrop and tower bolts, etc., will be paid under relevant item of BOQ 55.00 8,102.82 4,45,655.32

39. Providing and fixing sal/Padak wood for Cup-board Main frame and shutter including coach screws including applying one coat of 1M3

2.41 coal tar paint on the portions of the timber abutting against masonry / concrete all as directed at site of work including all materials, labour, (One Cubic

tools, equipment, etc., complete. metre) 0.50 1,27,648.86 63,824.43

40. Providing and fixing of colour anodized aluminium main frame for doors and partitions with extruded built up standard tubular 1 Kg (One Kilo

sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of Gram)

required dia. and size, including necessary filling up the gaps at junctions, i.e., at top, bottom and sides with required EPDM rubber/

2.42 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically (anodised transparent or

dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) wherever required including cleat angle, Aluminium snap

beading for glazing / paneling, C.P. brass / stainless steel screws, all as per relevant specifications as directed at site of work including all materials,

labour, tools, equipments, transport, fuel etc., complete. 60.00 539.85 32,391.00

41. Providing and fixing colour anodized aluminium sections for Shutter frames of doors and partitions with extruded built up standard 1 Kg (One Kilo

tubular and other sections of approved make (INDAL or JINDAL or Equivalent make) with clear anodized aluminium coating (minimum anodized Gram)

coating of Grade AC 15) conforming to IS 1868 including supplying and fixing necessary accessories like anodised aluminium cleat angles, snap on

2.43 beadings (clips) for glazing / panelling, C.P. brass screws, anodised aluminium push plates 100mm wide both sides fixed with G.I. Bolts and nuts

including necessary metal screws and concealed locking arrangements with woollen felt, filling the hollows of frames with wooden inserts of

required length of approved quality wherever required to facilitate fixing of fittings all as shown in the drawing and as directed including

all materials, labour, tools, equipments etc., complete. 60.00 652.54 39,152.40

42. Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, 1 No (One

2.44 embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with Number)

necessary accessories and screws etc. all as directed including all materials, labour, tools, equipments etc., complete. 30.00 1,071.44 32,143.20

43. Providing and fixing Prelaminated flat pressed three layer or graded wood particle board with both sides decorative lamination, 1M2

(medium density) Grade I, Type (One square

II conforming and marked to IS : 12823 (exterior grade) 12 mm thick for doors / partitions all as directed including all materials, labour, metre)

tools, equipments,transport, etc., complete. 60.00 828.36 49,701.60

44. a). Supplying and fixing in position 5.5 mm thick plain glass (saint Gobain or Modiguard or equivalent) for doors / windows / 1M2

partitions with necessary accessories like wooden beading/ Rubber beading, screw etc., all as directed at site including removing the old (One square

damaged glass, all materials, labour, tools, equipments, transport, fuel, etc., complete. metre)

Note: The actual area of glass used alone measured for payment purpose. 525.00 1,515.12 7,95,438.00

44. b). Supplying and fixing in position 4 mm thick Frosted glass sheet (saint Gobain or Modiguard or equivalent) (weight not 1M2

lessthan 10kg/sqm) for doors / windows / partitions with necessary accessories like wooden beading/ Rubber beading, screw etc., all as (One square

directed at site including removing the old damaged glass, all materials, labour, tools, equipments, transport, fuel, etc., complete. metre)

Note: The actual area of glass used alone measured for payment purpose. 125.00 1,366.44 1,70,805.00

45. Providing and laying brick jelly cement concrete in mix 1:5:10 (1 cement :5 CS sand :10 broken brick aggregate of 40mm nominal size ) in 1M3

2.48 volumetric proportions for sunken portion of the toilet to the required thickness including mixing, transporting, placing, consolidating, curing (One Cubic

etc., all as directed including cement and all other materials, labour, tools, equipments, etc., complete. metre) 10.00 5,868.14 58,681.40

46. Providing and fixing white vitreous china pedastal type water closet ( European type W.C pan) with seat and lid, 10 litre 1No.

low level white PVC flushing cistern, including flush pipe, with manually controlled device(Handle lever) conforming to IS : 7231, with all (One number)

fittings and fixtures complete,in sound working condition, including cutting and making good the walls and floors wherever required,

all as directed at site of work including all materials, labour, tools, equipments, etc., complete. 35.00 7,101.24 2,48,543.40

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

47. Providing and fixing White vitreous china Orissa pattern W.C pan of size 580x 440 mm with integral type foot rest squatting pan (Indian Type 1No.

WC Pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, incluing flush pipe, with manually controlled (One number)

device (Handle lever) conforming to IS :7231, with all fittings and fixtures complete, in sound working condition, including cutting and

making good the walls and floors wherever required, all as directed at site of work including all materials, labour, tools, equipments, etc., 5.00 7,376.18 36,880.90

48. Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm sizes available in the 1No.

market as per manufacturers specification with PVC flexible flush pipe with clamp, teakwood plugs, screws with necessary fittings and fixtures (One number)

for inlet and outlet arrangements etc., all as per relevant secification and as directed at site in sound working condition, including all materials, labour,

tools, equipment, etc., complete. 10.00 1,797.14 17,971.40

49. a). Providing and fixing good quality vitreous white wash hand basin of size 550x 400 mm or nearest size as available in the 1No.

market ( parryware or equivalent) with single 15mm C.P brass pillar tap. CP waste fitting , 32mm dia cp brass union, 15 mm dia PVC inlet (One number)

connection, 32mm dia pvc waste pipe fittings, a pair of cast iron brackets etc as available in the market suitable for fixing the wash

hand basin, including painting the brackets etc with two coats of synthetic enamel paint over one coat of primer fixing the brackets with teak

wood plug and making good the disturbed portion, etc., all in sound working condition all as per relevant specification and as directed

including all materials, labour, tools,equipments,etc., complete. 65.00 2,048.48 1,33,151.20

49. b). Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of 1No.

2.53 pipes and fittings suitable for the wash hand basin, including teak wood plug and necessary screws and making good the disturbed portion, (One number)

etc., all in sound working condition all as per relevant specification and as directed including all materials, labour, 5.00 1,834.90 9,174.50

49. c). Providing and fixing white vitreous china laboratory sink of Size 600x450x200 mm wherever required with C.I. brackets, 1No.

C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including (One number)

painting of fittings and brackets, including cutting and making good the wall all in sound working condition all as per relevant specification

and as directed including all materials, labour, tools, equipments, etc., complete. 5.00 7,177.94 35,889.70

49. d). Providing and fixing white glazed fire clay Drain Board of size 600 x 450 x 25mm wherever required with proper aligment /slope to 1No.

drain the water including (One number)

C.I. brackets, painting of brackets, cutting and making good the walls all in sound working condition all as per relevant specification and

as directed including all materials, labour, tools, equipments, etc., complete. 5.00 1,721.62 8,608.10

50. Providing and fixing 110mm dia PVC Nahani trap (floor trap with gratings suitable for PVC drainage pipe) embedding the trap 1No.

making the joints water tight etc., all as directed including all materials, labour, tools, equipments etc., complete. (One number) 65.00 283.79 18,446.35

51. Providing and fixing PVC gully trap with constructing masonry Chamber 30x30x50 cm inside, in brick work in cement 1No.

mortar 1:4 (1 cement :4 CS sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in reinforced (One number)

cement concrete slab 1:1.5:3 mix (1 cement : 1.5 crushed stone sand : 3 graded stone aggregate 20 mm nominal size), including

necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 CS sand : 10 graded stone aggregate 40mm nominal size ) and inside

plastering with cement mortar 1:3 (1 cement : 3 crushed stone sand) 12mm thick, finished with a floating coat of neat cement

punning @3.3kg/Sqm all as per relevant specification and as directed including cost of cement,all materials, labour, tools, equipments, etc., 12.00 3,003.10 36,037.20

52. Supplying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply 1 RM

(Trubore / Finolex or equivalent) for internal works exposed on wall with CPVC plain & brass threaded fittings, including fixing the pipe (One Running

with clamps at 1.00 m spacing with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., jointing of pipes & Meter)

2.58 fittings with one step CPVC solvent cement and testing of joints and including punching the masonry/concrete wherever required and

making good the disturbed portions, all as per relevant specification and directed at site of work, including cost of cement and all materials, labour,

tools, equipments, scaffolding etc., complete

2.59 b) 25mm dia 1 RM

2.6 c) 20mm dia 1 RM

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

53. Supplying and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of 20 mm dia, having thermal stability for hot & cold water 1 RM

supply (Trubore / Finolex or equivalent) for concealed works with CPVC plain & brass threaded fittings, including fixing the pipe with (One Running

clamps at 1.00 m spacing with all required accessories like tees, bends, couplings, elbows, reducers, unions, etc., jointing of pipes & fittings Meter)

2.61 with one step CPVC solvent cement and testing of joints and including punching the masonry/concrete wherever required and making

good the disturbed portions, all as per relevant specification and directed at site of work, including cost of cement and all labour, tools, equipments,

scaffolding etc., complete

Note: Necessary Cutting of Brick work, Concrete, Plastering, etc., will be paid under relevant items of BOQ 100.00 679.68 67,968.00

54. Providing, fixing and laying of pipes on floors of, approved quality rigid PVC pipes of 50/75/110mm outside diameters 6 1 RM

Kgf/sq.cm & 4Kgf/sq.cmpressure-(Finolex (or) Trubore (or) Varun (or) Supreme or equivalent) for waste water lines/sewage (One Running

lines / rain water down fall pipe including necessary specials like bends, tees, elbows, clamps and specials, etc., wherever required, including Meter)

2.62 joining the pipes using necessary adhesives, and making connections to floor traps, gully traps manholes etc., including cutting the floor

concrete masonry and making good the disturbed portions all as directed at site of work including all materials, labour, tools, equipments,

scaffolding, cement etc., complete.

2.63 b). 75mm Dia (6 Kgf/sq.cm) 1 RM

2.64 c). 110 mm Dia (4 Kgf/sq.cm) 1 RM

2.65 d). 110 mm Dia (6 Kgf/sq.cm) 1 RM

55. Supplying and fixing the sanitary fittings with First quality (Parryware/Hindware/ jaquar /Metro or 1No.

equivalent) C.P Brass / PTMT/ PVC/ SS fittings in toilets in sound working condition including testing etc., all as directed at site of work (One Number)

including all materials, labour, tools, equipments, etc., complete.

a). PTMT 600mm Long Towel Rail 5.00 810.66 4,053.30

2.67 b). C.P Brass Health faucet 15mm dia. With 1.2M length hose 1No.

2.68 c). C.P Brass Pillar cock 15mm dia 1No.

2.69 d). C.P Brass Short body tap 15mm dia 1No.

2.7 e). C.P Brass Stop cock 15mm dia (Concealed) 1No.

2.71 f). C.P Brass Angle valve 15mm 1No.

2.72 g). C.P Brass Long body Bib cock 15mm 1No.

2.73 h). C.P Brass Extension nipple of size:15mmx50mm 1No.

2.74 i). C.P Brass Shower arm with flange 12" length 1No.

2.75 j). C.P Brass Shower rose 1No.

2.76 k). C.P Brass 15mm dia. Single lever Wall mixer with telephonic shower 1No.

2.77 l). PTMT 32mm bottle trap- PTMT 1No.

2.78 m). PVC connection for wash basin and flush tank -600mm length 1No.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

2.79 n). PVC connection for Kohinoor Brand with Nylon thread Hot water line 1No.

2.8 0). Stainless Steel Grating 100mm dia 1No.

56. Supplying and fixing on wall Bevelled edge face mirror (saint Gobain or equivalent) of size 610x450mm(approx) with PVC 1No.

frames and plywood back all as directed at site of work including all materials, labour, tools, equipments, etc., complete. (One Number) 25.00 1,827.82 45,695.50

57. Supplying and fixing of Anodized Aluminium fittings for doors, cup-boards, etc., (anodised transparent or dyed to required 1No.

shade according to IS: 1868,Minimum anodic coating of grade AC 15) with necessary screws, all as directed at site of work (One Number)

including all materials, labour, tools, equipments, etc. complete

a). Tower bolt (barrel type) 200x10 mm 10.00 108.68 1,086.78

2.83 b). Tower bolt (barrel type) 100x10 mm 1No.

2.84 c). Tower bolt (barrel type) 75x10 mm 1No.

2.85 d). Hook and eye 250mm 1No.

2.86 e). Door handle100mm long with plate 150x32mm 1No.

2.87 f). Butt hinges 125mm long 1No.

2.88 g). Butt hinges 100mm long 1No.

58. Supplying and fixing of brass fittings for doors etc., with necessary screws, etc as directed at site of work including all materials, 1No.

2.89 labour, tools, equipments, etc. complete (One Number)

a). Door Stopper with rubber bush (Heavy) with CP brass screw 10.00 417.72 4,177.20

2.9 b). Bright finished Brass butt hinges 125mm 1No.

2.91 c). Bright finished Brass butt hinges 100mm 1No.

2.92 d). Bright finished Brass Tower bolts 150mm long 1No.

2.93 e). Bright finished Brass handles 125 mm with plate 175x32 mm 1No.

59. Supplying and fixing of Heavy Duty Stainless steel fittings for doors, etc., with necessary screws, etc as directed at site of work 1No.

2.94 including all materials, labour, tools, equipments, etc. complete (One Number)

2.95 b). Butt hinges - 100mm. 1No.

2.96 c). Tower Bolt / Draw Bolt - 150mm 1No.

2.97 d). Tower Bolt / Draw Bolt - 75mm 1No.

2.98 e). Aldrop 250mm long 1No.

2.99 f). Door handle 125mm long 1No.

3 g). Door handle 100mm long 1No.

3.01 h). Magnetic catch for doors/cup boards 1No.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

3.02 i). Hook and eyes 150mm long 1No.

3.03 j). Hook and eyes 50mm long 1No.

60. Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun 1M2

Reflectivity Index (SRI) of 105 on top of weathering course roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric (One Square

3.04 waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of Metre)

complete application /system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface

to remove loose particles with wire brushes, all as per relevant specification as directed including all materials, labour, tools, equipments, etc., 1,450.00 613.72 8,89,891.10

61. Preparing the internal / external surfaces of walls by Removing the existing white or colour wash by scrapping and sand papering 1M2

3.05 and preparing the surface, including applying putty to seal the cracks in the wall wherever required all as directed at site of work including (One Square

all labour, materials, tools, tackles, equipments, brushes, scaffolding, etc., complete Metre) 9,000.00 21.54 1,93,815.00

62. Preparing the surfaces of internal walls and applying one coat of primer (Asian 1M2

3.06 / Nippon / Berger or equivalent)) of approved brand and colour of good quality to give an even shade having low VOC (Volatile Organic Compound ) (One Square

content all as directed at site of work including all labour, materials, tools, tackles, equipments, brushes, scaffolding, etc., complete Metre) 9,000.00 80.71 7,26,408.00

63. Preparing the surfaces of existing interior walls / Ceilings etc., and applying two coats of Colour washing / White washing 1M2

with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (Asian / (One Square

3.07 Nippon / Berger or equivalent) of approved brand and manufacture, including applying additional coats wherever required to achieve even Metre)

shade and colour all as directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder,

safety belts, safety helmets, etc.,complete. 9,000.00 155.76 14,01,840.00

64. Preparing the surfaces of existing external walls /sunshades / wherever required and applying two coats of Colour washing 1M2

with Exterior emulsion paint having VOC (Volatile Organic Compound ) content less than 50 grams/ litre (Asian / Nippon / Berger or (One Square

equivalent) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour all as Metre)

directed at site of work including all labour, scaffolding, materials, tools, equipments, brushes, safety ladder, safety belts, safety helmets, 4,000.00 149.80 5,99,204.00

65. Preparing the surfaces of Old Internal walls and painting with two coats of synthetic enamel paint (colour) (Asian / Nippon / 1M2

3.09 Berger or equivalent) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, (One Square

tools, equipments, etc., complete. Metre) 2,500.00 112.04 2,80,102.50

66.Preparing the surfaces of old wooden members and painting with two coats of synthetic enamel paint (Asian / Nippon / Berger or 1M2

equivalent) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, tools, equipments, etc., (One Square

3.1 complete. Metre)

NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual.

2. The above quantity is inclusive of painting co-efficient. 720.00 112.04 80,669.52

67.Preparing the surfaces of new wooden members and painting with two coats of Deluxe multi surface paint (Asian / Nippon / Berger or 1M2

equivalent) of approved quality over coat of primer to give an even shade, all as directed including all materials, labour, scaffoldings, (One Square

3.11 brushes, tools, equipments, etc., complete. Metre)

NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual.

2. The above quantity is inclusive of painting co-efficient. 160.00 192.10 30,736.64

68.Preparing the surfaces of old /New steel members and painting with two coats of synthetic enamel paint (Asian / Nippon / 1M2

Berger or equivalent) of approved quality to give an even shade, all as directed including all materials, labour, scaffoldings, brushes, (One Square

3.12 tools, equipments, etc., complete. Metre)

NOTE: 1. Necessary painting co-efficient shall be allowed as per ChPA engineering manual.

2. The above quantity is inclusive of painting co-efficient. 350.00 112.04 39,214.35

69. Supplying of heavy duty brass/SS/Aluminium fittings for doors, windows, cupboard etc in sound working condition etc., all as directed 1No.

3.13 at site of work including all materials, labour, tools, equipments, etc., complete. (One Number)

a). Brass cupboard lock 6 lever of approved quality, 75mm size 5.00 172.16 860.81

3.14 b). Aluminium hanging floor door stopper with twin rubber & stopper 1No.

3.15 c). Stainless steel butt hinges 125x64x1.9mm 1No.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

3.16 d). Anodised Aluminium tower bolt (barrel type) 150x10mm 1No.

3.17 e). Anodised Aluminium handles 125mm with plate 175x32mm 1No.

3.18 f). Anodised Aluminium Aldrop 250mm long 1No.

70. Supplying diluting and injecting chemical emulsion for post constructional anti termite treatment with chlorpyrlphos 1M2

Emulsifiable concentrate with 1% concentration (i.e. one litre of chemical for every 20 litires of emulsion) in hospital building basement (One Square

treatment of soil along internal and external wall using chemical emulsion at 2.25 litire per linear metre inlcuding drilling and plugging holes Metre)

etc. and treating the soil under floors, masonry / concrete inside and outside of buildings wherever required, using chemical emulsion at 1

litre per hole at 30cm interval including drilling 12mm dia holes and plugging them with cement mortar 1:2 to the full depth of the hole

and treating the points of contact of wood work by chemical emulsion (in oil of kerosene based solution) at 0.5 litres per hole by drilling

6mm dia at downward angle of 45 degree at 150mm c/c and sealing the same and as directed including all material (including cement)

labour, tools, scaffolding, ladder, equipments etc. complete 1,000.00 139.71 1,39,712.00

3.2 71. Removing the existing glass panes in the fixed aluminium frames in aluminium windows wherever required and refixing with new 1M2

Neoprene/EPDM rubber gasket/ sealeant, aluminium clips using existing glass panes, etc., all as directed at site of work including all labour, (One Square

scaffolding, materials, tools, equipments, etc.,complete. Metre) 100.00 470.82 47,082.00

72. Supplying of Foam board of various sizes for use of signage , identification and name boards whererver required all as directed at site of 1M2

3.21 work including all labour material,tools, equipments, transport,etc. complete. (One Square

73. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other 1 RM

Frames/Chowkhat of size 45x85mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural (One Running

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints Meter)

after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw

withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2

and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge and as

directed at site of work including transporting, placing, all materials, labour, tools, plants, equipments, fuel, etc., complete. 275.00 1,010.08 2,77,772.00

74. Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required 1M2

size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice (One square

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and metre)

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength

3.23 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,

water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge and as directed at site of work including transporting, placing, all

materials, labour, tools, plants, equipments, fuel, etc., complete.

(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 80.00 4,737.70 3,79,016.00

75. Providing and fixing First quality UPVC Ball valve to the water pipe lines in all floors in sound working condition including making the 1 No (One

3.24 joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, equipments, etc., complete. Number)

3.25 b). 32mm dia 1 No (One

76. Providing and fixing First quality Gun metal gate valve with CI wheel to the water pipe lines in all floors in sound working 1 No (One

3.26 condition including making the joints water tight and testing etc., all as directed at site of work including all materials, labour, tools, Number)

equipments, etc., complete. 30.00 588.82 17,664.60

b). 25mm dia 1 No (One

c). 32mm dia 1 No (One

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

3.29 77. Engaging of the labours (Coolie) to shifting hospital fixtures / equipments wherever required to the opt places for day to day 1 No (One

operation in a safer manner as directed as site including labour, tools, etc., complete. Number) 50.00 1,142.24 57,112.00

78. Deep cleaning the existing wall tiles, floor tiles and Mosaic tiles wherever required by using harmless chemical solution and as per 1M2

3.3 manufactures specification all as directed including all labour, tools, equipments, chemical etc. complete. (0ne Square

3.31 79. Removing, rolling, stacking and refixing the available mesh gap garware polyster safety materials over hospital building all as directed at site 1M2

of work including all materials, labour, tools, equipments, etc., complete. (0ne Square

80. Supplying, fabricating and fixing the M.S gate, window / Ventilator grill, Ladder as per existing or as directed at site using 1 Kg (One Kilo

suitable structrual steel as verticles, horizontals and diagonal members, to the reqired length, welding the joints all as directed at site of work Gram)

and providing scaffolding, fixing gate in proper alignment, including painting with one coat of red oxide primer on the steel members, all as

directed at site of work including cost of cement and all materials, labour, tools, transport, equipments, fuel, etc., complete.

1. The payment is based on the total weight of the MS flats, bars, etc., as fabricated.

2. The weighment will made at site or any other place as approved by the engineer-in-charge. Necessary charges for transport, weighment.

etc., will be borne by the contractor. 2,700.00 189.04 5,10,397.20

81. Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of 1M2

3.33 approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc.all as directed at site of work (0ne Square

including all materials, labour, tools, transport, equipments, fuel, etc., complete. Meter) 50.00 2,826.10 1,41,305.00

82. Supplying and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement 1M2

slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (0ne Square

(1 cement: 4 crushed stone sand). Light shade pigment using white cement all as directed at site of work inclulding all labour, tools, tackles, Meter)

equipments, fuel transport, etc. complete. 25.00 1,151.68 28,792.00

83. a). Hire charges for Tractor with trailor for shift basis (8 hours) for conveying

unwanted materials steel/ wooden / Rubber materials/leaves etc to RSO yard

3.35 /dumping yard with Labour Engaged for lifting the scraps etc..,Loading and unloading materials etc., all as directed at site of work

inclulding all labour, tools, tackles, equipments, fuel transport, etc. complete.

Note : The required labour will be supplied under relevant item in BoQ. 10.00 4,845.08 48,450.80

3.36 b). Deployment of Labour (Coolie) (3Nos/shift) and engaged 10 shifts 1 No

84. Operating of vehicle mounted Heavy duty jetting cum suction machine including diesel with driver and operator for 1 Day (One day)

cleaning sewer lines, septic tank, manholes including loading and disposing the waste wherever required as directed at site including all

labour, tools, equipments, transport, fuel, etc., complete.

Note: 1. For handling/cleaning the machine, the cost of labour charges will be bone by the contractor.

3.37 2. The required water will be given in the near by site area at free of cost.

3. The rate shall be inclusive of diesel, all tools and plants etc., complete.

4. The contractor has not claim any charge for damaged parts.

5. The unwanted materials like silt or any garbage to be dumped at open area as directed by the department.

6. If any Break down or labour problem during working time deduction will be calculated proportionately based on the rate per day/per 2.00 17,364.88 34,729.76

85. Dewatering using 10 HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, 1 Hr.

3.38 conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges wherever required as directed at site (One Hour)

including all labour, tools, equipments, transport, fuel, etc., complete. 16.00 729.06 11,665.01

86. Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets 1 RM

3.39 fixed with C.P. brass screws and PVC sleeves etc., all as directed at site of work including all labour, materials, tools, equipments, (One Running

etc.,complete. Meter) 200.00 572.77 1,14,554.40

87. Supplying and fixing 20mm dia PVC Pipe for AC water drain outlet, with all required accessories like tees, bends, couplings, 1 RM

elbows, reducers, unions, etc., jointing of pipes & fittings with PVC solvent and testing of joints and including cutting the masonry/concrete (One Running

3.4 wherever required and making good the disturbed portions, all as per relevant specification and directed at site of work, labour, tools, Meter)

equipments, scaffolding etc., complete

Note: Necessary Cutting of Brick work, Concrete, Plastering, etc., will be paid under relevant items of BOQ. 400.00 365.09 1,46,036.80

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

88. a). Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 1M2

60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are (0ne Square

3.41 multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. Meter)

The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window

should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. 15.00 9,565.08 1,43,476.20

b). Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash 1M2

and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and (0ne Square

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel Meter)

section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever

required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and

quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement

and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh

/ Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming

to IS: 3548 & IS: 16231 shall be paid separately.

Fixed window / ventilator with mullion / transom.

Using R4 series with frame (64mm & above ) x (50mm & above) & mullion (64mm & above) x (70mm & above). (Height above 2.5 metre)

Note: Glass area will be measured and paid separately as per relevant BoQ. 75.00 7,115.40 5,33,655.00

89. Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash 1M2

and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and (0ne Square

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized Meter)

mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where

ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of

matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and

necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed

duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between

3.43 frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all

complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement

and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/

double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid

Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers

with SS 304 body.

Using R3 series with frame (98mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak)

powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 metre). 500.00 9,311.38 46,55,690.00

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

90. Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash 1M2

and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and (0ne Square

2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel Meter)

section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever

required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and

quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement

and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh

/ Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming

to IS: 3548 & IS: 16231 shall be paid separately.

Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool

pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm & above) x

(50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height

upto 1.2 metre).

Note: Glass area will be measured and paid separately as per relevant BoQ. 35.00 10,825.44 3,78,890.33

91. Providing and fixing good quality polyester fabric (washable) vertical blinds (100mm wide) with anodized aliminium top rails, wheels 1M2

in poly carbonate runners for smooth movement and self adjustable unbreakable Teflon spacers, trouble free control unit, bottom chain, fitting (0ne Square

chain galvanised steel bottom weight, abord weight including all accessories etc. all as directed including all materials, labour, tools, Meter)

equipments, scaffolding etc. complete. 100.00 1,030.97 1,03,096.60

92. Providing and fixing good quality non - reflective type sun control film 1M2

(Garware or equivalent) of thickness 50mm microns to the glass panels of the partition (0ne Square

/ doors / windows including thoroughly cleaning the glass panels and removing the stain if any, with good quality soap or liquid detergents, Meter)

removing any other foreign particles etc., all as directed including all materials, labour, tools, etc., complete. 50.00 971.38 48,568.80

3.47 93. Engaging of labour for removal of unwanted vegetation growth in all floors of the building wherever required all as directed 1 No (One

including labour, materials, tools, equipments, transport, fuel, etc., complete. Number) 10.00 1,142.24 11,422.40

94. Providing and laying Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed 1M2

3.48 with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 CS (0ne Square

sand), 25mm thick all as directed including all materials, labour, tools, etc., complete. Meter) 500.00 2,124.00 10,62,000.00

95. Providing and laying 40mm thick granolithic flooring in C.C. 1:2:4 in volumetric proportions (1 cement : 2 crushed stone sand : 4 1M2

3.49 hard granite graded stone aggregate 12.5mm nominal size) including finishing coat of neat cement at 2.20Kg/m2, including mixing, transporting, (0ne Square

placing ramming, consolidating, curing, etc.,all as directed including cement and all other materials, labour, tools, equipments, etc. Meter) 50.00 593.54 29,677.00

96. Providing and fixing SFRC (Steel Fiber Reinforced Concrete) Manhole cover with frame of size as directed for Manhole and 1No.

wherever required in mix 1:1.5:3 ( 1 cement : 1.5 C.S.sand : 3 hard granite graded stone aggregate of 20mm nominal size) in volumetric (One number)

proportions to the required size, all as per relevant specifications, drawings and as directed including necessary form work, mixing,

3.5 transporting, placing, compacting, curing, finishing the exposed concrete surface with neat cement punning at 2.2 kg/Sq.m as directed,

including lifting, handling, transporting and placing the cover over the frame in correct position and alignment, providing necessary lifting holes

including all materials, labour, tools, plants, equipments, fuel, etc., complete.

97. Supplying and fixing of good quality insects preventing PVC netlon mesh without country weed reepers consisting of 1.8mm 1M2

X1.8mm apexture for size (Approx) to the window openings and ventilators etc., and wherever required after removing the old damaged mesh (0ne Square

3.52 including providing 25mm wide hook fasteners nailed stabled continuously on all the four sides of the existing upvc frames with suitable hook Meter)

and loop fasteners tailored on the edges of the screen all of approved quality and as directed at site of work including all labours,

materials, fabrication, tools, equipments, scaffoldings, etc., complete. 260.00 357.54 92,960.40

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

98. Removing the exisitng wornout Aluminium sliding door and re-placing with UPVC (Un-Plasticized Polyvinyl Chloride) Two track 1M2

two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with (0ne Square

3.53 multi-point locking system, adjustable nylon rollers with SS Meter)

304 body Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x (85mm & above). (Height above

2.5 metre) all as directed at site of work including all labours, materials, fabrication, tools, equipments, scaffoldings, etc., complete. 8.00 8,427.56 67,420.48

99. Removing wornout GI pipe outlet / delivery pipe embedded in the RCC Over head tank above staircase Head room and Providing 1 RM

and fixing GI pipe / Gun Metal Gate Valve for Delivery / Washout pipe all as directed at site of work including all labours, materials, (One Running

fabrication, tools, equipments, etc., complete. Meter)

Note: Necessary Cutting of RCC, laying of concrete and finishing with CM 1:3, 20mm thick with admixtures etc., will be paid under relevant

b). 50mm dia Gate Valve (Heavy Duty) 1No.

100. Loading, transporting, dumping and leveling the surplus earth and debris etc., within a lead of 3kms out side the Port 1M3

premises all as per relevant specifications and as directed including all labour, transport, tools, equipments, fuel, etc., complete. (0ne Cubic

Note:1.The tenderer shall maintain trip sheets in triplicate in ChP's approved format at his own cost. Meter)

2.Payment will be based on the lorry cubical content. No deduction of voids for debris will be

4. 20% deduction of voids for surplus earth will be made. However the final quantity will be restricted to

actual quantity of debris dismantling

/demolishing items.

(a) Surplus Earth 15.00 298.54 4,478.10

3.57 b). Debris 1M3

Total Amount of Schedule - A2 Civil Works -Surgical Block 2,39,68,976.52

Total Amount of Schedule - A2 Civil Works -Surgical Block 2,39,68,976.52

4 Schedule - A3 Electrical work -

1). Supply and Install / Replacing of Electric Flying Insect Killer Machine 2 feet. Wall Mounted or Free Standing - Hanging Chain Included Removable No

Catchment Tray For Dead Insect Bodies, Easily Cleanable Without Insect Contact as per Schedule ‘A’. 12.00 5,022.08 60,264.96

2.Supply and Install / Replacing of Distribution Board – I comprising of No

1 No 125A 4P 25 kA MCCB as incomer

2 Nos 63A TP MCB,

6 Nos 32A SP MCB,

12 Nos 20A SP MCB,

12 Nos 16A SP MCB, 'B' Series MCB and

9 Nos 10A SP MCB, 'B' Series MCB as outgoing

with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’. 7.00 76,515.92 5,35,611.44

3.Supply and Install / Replacing of Distribution board - II shall be comprising with suitable way of No

1 No 100 A 4P, 25 kA MCCB as incomer and

2 Nos 63A TP MCB,

3 Nos 32A SP MCB,

4.03 6 Nos 20A SP MCB,

6 Nos 20A SP MCB, 'C' Series MCB

12 Nos 16A SP MCB, 'B' Series MCB and

12 Nos 10A SP MCB, 'B' Series MCB as outgoing

with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’. 7.00 64,274.60 4,49,922.20

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

4.Supply and Install / Replacing of Distribution Board - III comprising of No

1 No 63A, 4P, MCCB as incomer and

2 Nos 32A TP MCB,

12 Nos 20A SP MCB, 'C' Series MCB and

12 Nos 10A SP MCB, 'B' Series MCB as outgoing

with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’. 10.00 54,724.86 5,47,248.60

5.Supply and Install / Replacing of Distribution Board – IV comprising of 1 No 63A 4P MCCB as incomer and No

1 Nos 32A TP MCB,

3 Nos 20A SP MCB,

9 Nos 16A SP MCB, 'C' Series MCB and

9 Nos 10A SP MCB, 'B' Series MCB as outgoing

with suitable copper wires / busbar for each phase and neutral connection with earth link and all other components and accessories as per Schedule ‘A’. 10.00 43,719.00 4,37,190.00

4.06 6.Supply of 4 Feet 2 X 20w Box type LED BOX TYPE FITTING with T8 LED Tube light with SINGLE SIDE connection and all other accessories as per No

4.07 7.Supply of 4 Feet 1 X 20w Box type LED BOX TYPE FITTING with T8 LED Tube light with SINGLE SIDE connection and all other accessories as per No

4.08 8.Installation Surface/ Recessed of 4 Feet BOX TYPE FITTING light fitting with suitable down rods, brackets as per Schedule ‘A’. No 500.00 195.88 97,940.00

4.09 9.Supply of suitable Down Rod for 4 Feet Tube Light Fittings as per Schedule ‘A’. Ft 2,000.00 56.64 1,13,280.00

4.1 10.Supply of 2 Feet 10 W Moulded type MIRROR LED Fittings with all connections other accessories as per Schedule ‘A’. No 50.00 392.94 19,647.00

4.11 11.Installation of above Moulded type LED Mirror light fittings as per Schedule ‘A’. No 50.00 168.74 8,437.00

4.12 12.Supply of recess type diffused LED 20 W Bulk Head light fitting suitable for 220V, full bright at various locations as per Schedule ‘A’. No 20.00 1,334.58 26,691.60

4.13 13.Installation of Bulk Head light fittings as per Schedule ‘A’. No 20.00 168.74 3,374.80

4.14 14.Supply and Install LED 0.5 W BULB FOR B22 holder suitable for 220V, full bright at various locations as per Schedule ‘A’. No 30.00 141.60 4,248.00

4.15 15.Supply and Install / Replace of recess type diffused LED 7" round 12 W light fitting WITH BULB suitable for 220V, full bright at various locations as No

16.Supply and Install / Replacing to be mount in the Surface/ Recessed 220V CALLING BELL with 6 different sounds along with base plates Junction No

Box and ceiling rose including terminations for all units. including supply of modular switch box with all other accessories etc. as per Schedule ‘A’. 30.00 767.00 23,010.00

4.17 17.Supply and Install / Replace of one number 63A FP, MCCB with suitable connections and Metal type ENCLOSURE ('C' series MCCB) at various No

locations as per Schedule ‘A’. 15.00 17,936.00 2,69,040.00

4.18 18.Supply and Install / Replace of one number 32A FP, MCCB with suitable connections and Metal type ENCLOSURE ('C' series MCCB) at various No

locations as per Schedule ‘A’. 15.00 16,815.00 2,52,225.00

4.19 19.Supply and Install / Replace of one number 32A DP, MCB with suitable connections and Metal type ENCLOSURE ('C' series MCB) at various No

locations as per Schedule ‘A’. 10.00 3,788.98 37,889.80

4.2 20.Supply and Install of one number 16A/20A DP, MCB with suitable connections and Metal type ENCLOSURE ('C' series MCB) at various locations as No

4.21 21.Supply and Install / Replace of one number 32A DP, MCB with suitable connections on the EXISTING Metal type ENCLOSURE / DB ('C' series No

MCB) at various locations as per Schedule ‘A’. 15.00 841.34 12,620.10

4.22 22.Supply and Install / Replace of one number 20A SP, MCB with suitable connections on the EXISTING Metal type ENCLOSURE / DB ('C' series No

MCB) at various locations as per Schedule ‘A’. 50.00 280.84 14,042.00

4.23 23.Supply and Install / Replace of one number 16A SP, MCB with suitable connections on the EXISTING Metal type enclosure / DB ('C' series MCB) as No

at various locations as per Schedule ‘A’. 100.00 280.84 28,084.00

4.24 24.Supply and Install / Replace of one number 10A SP, MCB with suitable connections on the EXISTING Metal type ENCLOSURE / DB ('B' series No

MCB) at various locations as per Schedule ‘A’. 100.00 280.84 28,084.00

4.25 25.Supply and Installation / Replace of 6 Way Metal Box Enclosure as per Schedule ‘A’. No 20.00 1,457.30 29,146.00

4.26 26.Supply and Installation / Replace of 8 Way Metal Box Enclosure as per Schedule ‘A’. No 20.00 1,345.20 26,904.00

4.27 27.Supply and Install / Replace Surface/ Recessed of all materials and accessories for 16A/15A MODULAR type switch and socket outlet along with base No

plates, FRAME AND WITH SUITABLE BOX connections as per Schedule ‘A’. 150.00 672.60 1,00,890.00

4.28 28.Supply and Install / Replace Surface/ Recessed of all materials and accessories for 2 Nos 5A MODULAR type switch and socket outlet along with base No

plates, FRAME AND with SUITABLE BOX connections as per Schedule ‘A’. 200.00 841.34 1,68,268.00

29.Supply and Install / Replacing to be mount in the Surface/ Recessed switch board of all materials of 5 Amps Modular Switch and Socket outlet to be No

mounted in the modular type Sub Switch Board itself, including base plates, FRAME and wiring to the plug as per Schedule ‘A’. 200.00 521.56 1,04,312.00

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

30.Supply and Install / Replacing to be mount in the Surface/ Recessed switchboard of all materials of 5 Amps modular switch including supply of No

modular switch box with all other accessories to control of fan, light etc. as per Schedule ‘A’. 900.00 549.88 4,94,892.00

31.Supply and Install / Replacing to be mount in the Surface/ Recessed switchboard of all materials of 5 Amps MODULAR Bell push switch including No

supply of modular switch box with all other accessories to control of fan, light etc. as per Schedule ‘A’. 30.00 577.02 17,310.60

4.32 32.Supply of 1200 MM, brown colour sweep Ceiling fan, with wide blades, suitable down Rod, electronic regulator and all other accessories as per No

4.33 33.Installation of Ceiling fan as per Schedule ‘A’. No 120.00 280.84 33,700.80

4.34 34.Supply of suitable Down Rod for Ceiling fan with as per Schedule ‘ A’. Ft 400.00 83.78 33,512.00

4.35 35.Supply of 450 mm sweep, Wall mounting fan with polypropylene plastic blade, powder coated metal body and guards with speed control and all other No

accessories as per Schedule ‘A’. 50.00 3,923.50 1,96,175.00

4.36 36.Supply of 400 mm sweep, Wall mounting fan with polypropylene plastic blade, powder coated metal body and guards with speed control and all other No

accessories as per Schedule ‘A’. 20.00 3,363.00 67,260.00

4.37 37.Installation of above Wall mounting fans as per Schedule ‘A’. No 70.00 280.84 19,658.80

4.38 38.Supply of 450 mm sweep, Pedestal fan with polypropylene plastic blade, powder coated metal body and guards with speed control and all other No

accessories as per Schedule ‘A’. 10.00 5,380.80 53,808.00

4.39 39.Supply of 18” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’. No 5.00 5,156.60 25,783.00

4.4 40.Installation of above Exhaust fan as per Schedule ‘A’. No 5.00 280.84 1,404.20

4.41 41.Supply of 15” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’. No 5.00 3,304.00 16,520.00

4.42 42.Installation of above Exhaust fan as per Schedule ‘A’. No 5.00 280.84 1,404.20

4.43 43.Supply of 12” size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’. No 10.00 2,578.30 25,783.00

4.44 44.Installation of above Exhaust fan as per Schedule ‘A’. No 10.00 280.84 2,808.40

4.45 45.Supply of 9'' size of Exhaust fan with necessary clamps and accessories for all units as per the technical specifications as per Schedule ‘A’. No 10.00 2,466.20 24,662.00

4.46 46.Installation of above Exhaust fan as per Schedule ‘A’. No 10.00 280.84 2,808.40

4.47 47.Supply of 15 litre, 2000 Watts storage water heater with ABS body and PUF insulation as per Schedule ‘A’. No 22.00 13,227.80 2,91,011.60

4.48 48.Installation of above Heater as per Schedule ‘A’. No 22.00 841.34 18,509.48

49.Supply of EXTENSION BOX that contains 3 Nos 5A MODULAR type switch and 5 PIN socket along with 5 metre 1.5 sqmm 3 core Workshop No

flexible copper cable and 5A 3 pin TOP outlet along with Suitable connections as per Schedule ‘A’. 10.00 1,277.94 12,779.40

50.Supply of EXTENSION BOX that contains 2 Nos 15A/5A MODULAR type switch and 6 PIN socket along with 5 metre 2.5 sqmm 3 core Workshop No

flexible copper cable and 15A 3 pin TOP outlet along with Suitable connections as per Schedule ‘A’. 10.00 1,738.14 17,381.40

4.51 51.LAYING of 1.25 INCH PVC Pipe in the FLOOR / WALL by CONCEALED. The Mtr

Contractor shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove as per

52Supply and wiring of all materials and accessories to carry out the surface/concealed wiring by using suitable size of PVC conduit /Casing and capping Pts

with 2 runs 1.5 Sq.mm and one run 1.0 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor multistrand wires for Phase, Neutral and

4.52 Earth. From SSB to Individual PT for Fans, Tube lights etc., through connected junction/ inspection boxes along with modular flush type control switch

along with base plates and ceiling rose including terminations wherever necessary as per the technical specifications as per Schedule ‘A’. The Contractor

shall cut the groove on the wall as per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 1,200.00 1,513.94 18,16,728.00

53.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 4 runs 10 sq.mm and one run of 6 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 200.00 801.22 1,60,244.00

54.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 4 runs 6 sq.mm and one run of 4 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 200.00 599.44 1,19,888.00

55.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 4 runs 4 sq.mm and one run of 2.5 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 200.00 509.76 1,01,952.00

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

56.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 2 runs 6 sq.mm and one run of 4 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 1,000.00 442.50 4,42,500.00

57.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 2 runs 4 sq.mm and one run of 2.5 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 4,000.00 352.82 14,11,280.00

58.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 2 runs 2.5 sq.mm and one run of 1.5 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 6,000.00 271.40 16,28,400.00

59.Supply and Wiring of all materials and accessories and to carry out the surface/concealed with suitable size of PVC conduit /CASING and Capping Mtr

wiring by using with 2 runs 1.5 sq.mm and one run of 1.0 Sq.mm FRLS PVC insulated unsheathed multistrand copper conductor wires etc., through

connected junction/ inspection boxes along with terminations wherever necessary as per Schedule ‘A'. The Contractor shall cut the groove on the wall as

per the requirement, after laying the pipe & wire, the same area shall be replaster the groove. 500.00 226.56 1,13,280.00

60.Supply of 4 core 25 Sq.mm L.T. underground cable of 1100 V galvanized steel strip armoured XLPE cable with stranded Aluminium conductor Mtr

conforming to IS 7098 Part I 1985 with latest amendments with ISI mark for various locations as per Schedule ‘A’. 300.00 258.42 77,526.00

4.61 61.Laying of the cable on the wall by Alu. Clamping with equal intervals with all other accessories as per Schedule ‘A’. Mtr 250.00 79.06 19,765.00

4.62 62.Laying of the cable of through on the tray as per Schedule ‘A’. Mtr 50.00 79.06 3,953.00

63.Supply of 4 core 16 Sq.mm L.T. underground cable of 1100 V galvanized steel strip armoured XLPE cable with stranded Aluminium conductor Mtr

conforming to IS 7098 Part I 1985 with latest amendments with ISI mark for various locations as per Schedule ‘A’. 300.00 198.24 59,472.00

4.64 64.Laying of the cable on the wall by Alu. Clamping with equal intervals with all other accessories as per Schedule ‘A’. Mtr 250.00 79.06 19,765.00

4.65 65.Laying of the cable of through on the tray as per Schedule ‘A’. Mtr 50.00 79.06 3,953.00

4.66 66.Removal of Existing All kind of Cables, Wirings, Light fittings, all kind of Fans, Panels and DBs as per Schedule ‘A’. LOT 1.00 1,68,150.00 1,68,150.00

Total amount of Schedule - A3 Electrical work 1,21,64,337.98

Total amount of Schedule - A3 Electrical work 1,21,64,337.98

5 Schedule - A4 Electronics & Communication-Telephone Communication work, - -

5.01 1). Supply of 50 pair 0.5 mm copperunarmoured PVC cable Preferred make : Finolex / PolyCab/Legrand Mtrs 255.00 494.42 1,26,077.10

5.02 2). Supply of 20 pair (15 mm copper unarmoured PVC cable Preferred make : Finolex /PolyCab/Legrand Mtrs 300.00 198.24 59,472.00

5.03 3). Supply of 5 pair 0.5 mm copper unarmoured PVC cable Preferred make : Finolex I PolyCab/Legrand Mtrs 4,280.00 49.56 2,12,116.80

5.04 4). Supply and Laying of size PVC casing & capping for the laying 50 pair 0.5 mm copper unarmoured PVC cable inside the cabin Mtrs 255.00 363.44 92,677.20

5.05 5). Supply and Laying of 1 1/2" size PVC casing & capping for the laying 20 pair 0.5 mm copper unarmoured PVC cable inside the cabin Mtrs 300.00 247.80 74,340.00

5.06 6). Supply and Laying of 1" size PVC casing & capping for the laying 5 pair 0.5 mm copper unarmoured PVC cable inside the ca in Mtrs 4,280.00 82.60 3,53,528.00

5.07 7). Supply and Installation of Krone connector Nos 200.00 660.80 1,32,160.00

5.08 8). Supply of Installation of I/O Box Nos 90.00 594.72 53,524.80

5.09 9). Supply and Installation of 50 pair junction box with Krone Connector Nos 10.00 7,054.04 70,540.40

Total Amount of Schedule - A4 Electronics & Communication-Telephone Communication work, 11,74,436.30

Total Amount of Schedule - A4 Electronics & Communication-Telephone Communication work, 11,74,436.30

6 Schedule - A5 Electrical- Power supply work, - -

1). Charges for Dismantling, Removal, Loading, Transporting, Dumping of old, reduntant various Alu power cables and LT panels etc from Hospital 1 Job

2). Supply & Laying of 4core 70, Aluminium conductor XLPE L.T. cable mts

6.03 b). Laying In concrete trench mts 100.00 236.00 23,600.00

6.04 c). Laying on cable Tray mts 300.00 236.00 70,800.00

6.05 d). Laying Underground mts 100.00 354.00 35,400.00

6.06 e).End termination for 4Core x 70 Set 12.00 1,888.00 22,656.00

3). Supply & Laying of 3.5 core 185, Aluminium conductor XLPE L.T. cable mts

6.08 b). Laying In concrete trench mts 100.00 259.60 25,960.00

6.09 c). Laying on cable Tray mts 400.00 259.60 1,03,840.00

6.1 d). Laying Underground mts 100.00 389.40 38,940.00

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

6.11 e). End termination for 3.5 x 185 set 10.00 2,950.00 29,500.00

4). Supply & Laying of 3.5c150sqmm LT Alu cable mts

6.13 b). In concrete trench mts 100.00 259.60 25,960.00

6.14 c). On FRP cable tray mts 300.00 259.60 77,880.00

6.16 e). End termination set 20.00 2,360.00 47,200.00

5). Supply & Laying of 4c95 sqmm LT Alu cable mts

6.18 b). Laying in Concrete trench mts 100.00 236.00 23,600.00

6.19 c). On FRP cable tray mts 300.00 236.00 70,800.00

6.21 e). End termination set 20.00 2,124.00 42,480.00

6. Supply& laying of 4core 50 square mm alu xlpe lt cable mts

6.23 b). Laying in Concrete trench mts 100.00 236.00 23,600.00

6.24 c). On FRP cable tray mts 300.00 236.00 70,800.00

6.26 e). End termination 4core 50sqmm set 20.00 2,124.00 42,480.00

7. Supply& laying of 4core 25 square mm alu xlpe lt cable mts

6.28 b). Laying in Concrete trench mts 100.00 200.60 20,060.00

6.29 c). On FRP cable tray mts 300.00 200.60 60,180.00

6.31 e). End termination 4core 25 set 20.00 472.00 9,440.00

6.32 8. Supply& laying of 4core 16 square mm alu xlpe lt cable mts

6.33 b). Laying in Concrete trench mts 100.00 188.80 18,880.00

6.34 c). On FRP cable tray mts 300.00 188.80 56,640.00

6.36 e). End termination 4c16sqmm set 20.00 354.00 7,080.00

9. Supply installation testing commsioning of wall mounted LT Panel -I comprising 250Amps 4 pole incomer MCCB and 3 NoS 100AmPs MCCB as set

6.38 b). Installation Testing commissioning set 4.00 16,520.00 66,080.00

10). Supply installation testing commsioning of wall mounted LT Panel -II comprising 2 nos 400 Amps 4p MCCB as incomers, 10 Nos 100Amps, set

6.39 4p,MCCBS, 1 Nos. 250A MCCB 4P as out going feeders

6.4 b). Installation Testing commissioning set 1.00 23,600.00 23,600.00

11). Supply installation testing commsioning of wall mounted LT Pane-III comprising 630 Amps 4p MCCB as incomer and 8 Nos 100A 4p MCCB and 6 set

6.41 Nos 63A 4P MCCB as outgoing feeders

6.42 b). Installation Testing commissioning set 1.00 23,600.00 23,600.00

12). Supply installation testing commsioning of Floor Mounted LT feeder pillar outdoor with 250Amps 4P MCCB as Incomer and 6 nos 100A 4p set

6.43 MCCB 6 nos 63A 4P MCCB as outgoing

6.44 b). Installation Testing commissioning set 1.00 17,700.00 17,700.00

13). Supply installation testing commsioning of wall mounting LT Panel -IV comprising 250Amps MCCB as incomer, and1 no 100A MCCB 8 Nos 63 set

6.45 amps 4p mccb as outgoing

6.46 b). Installation Testing commissioning set 1.00 14,160.00 14,160.00

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

6.47 14). Charges for Rerouting of various size LT cables 16 sqmm to 300 sqmm including dis connection and reconnection mts

15). Supply and Mounting of FRP cable Tray Ladder Type 600 mm width Mts

6.51 b). Mounting along the wall with Angle Grouting Mts 600.00 531.00 3,18,600.00

16). Supply and Mounting of FRP cable Tray Ladder Type 300 mm width mts

6.53 b). Mounting along the wall with Angle Grouting Mts 600.00 413.00 2,47,800.00

6.54 17). Supply & mounting FRP cable TRAY ladder type 150mm width Mts

6.55 b). Mounting along the wall with Angle Grouting Mts 500.00 354.00 1,77,000.00

6.56 18). Supply & Mounting of cone type FRP junctions for 500 mm to 300mm tray Nos

6.57 b). Mounting along the wall with Angle Grouting Nos 20.00 590.00 11,800.00

6.58 19). Supply & Mounting of cone type FRP junctions for 500 mm tray to 150mm No.

6.59 b). Mounting along the wall with FRP/MS Angle Grouting No. 20.00 590.00 11,800.00

6.6 20). Supply & Mounting of cone type FRP junctions for 300 mm tray to 150mm No.

6.61 b). Mounting along the wall withMS/FRP Angle Grouting No. 10.00 472.00 4,720.00

6.62 21). SITC of Permanent Earth Electrode No.

6.63 b). Installation Testing commissioning No. 4.00 8,260.00 33,040.00

6.64 22). Supply & laying of GI Earth Strip 40mm*5mm Meter

6.65 b). Laying and interconnecting Meter 300.00 177.00 53,100.00

6.66 23). Supply & laying of GI Earth Strip 25mm*6mm Meter

6.67 b). Laying and interconnecting Meter 200.00 153.40 30,680.00

6.68 24). SITC of AC DBs with 100A MCCB 4P as Incomer and 16 Nos 20A DP MCB as outgoing No.

6.69 b). Installation Testing commissioning No. 10.00 5,900.00 59,000.00

6.7 25). Supply and Laying of GI earthwire 8 SWG Meter

6.72 26). Supply and providing cable Joints for various size LT cables No.

a). Supply of Joint Kit 3.5.Core 185 Sqmm 6.00 7,080.00 42,480.00

6.73 b). Providing Joint No. 6.00 4,130.00 24,780.00

6.74 c). Supply of Joint Kit 3.5.Core 150 Sqmm No. 6.00 7,080.00 42,480.00

6.75 d). Providing Joint No. 6.00 4,130.00 24,780.00

6.76 e). Supply of Joint Kit for 4x95,4x70, 4x50, 4x25, 4x16 cables (2 Nos. Each) No. 10.00 7,080.00 70,800.00

6.77 f). Providing Joint for above cables No. 10.00 4,130.00 41,300.00

27). Supply& Installation of 100KVAR AFC panel,indoor Floor Mounted , Top side Cable Entry 415V, 3-phase, 50Hz microcontroller-based APFC relay No

for automatic power factor correction, capacitor duty contactors, individual MCB protection for each capacitor bank, a current transformer (CT) for

accurate current sensing, and a digital display for parameters like voltage, current, and power factor. The panel will also have specific features such as

auto/manual mode, screen hold, and overload protection with 200A,50KA, 4P MCCB as incomer a). Supply 1.00 2,59,600.00 2,59,600.00

6.79 b). Installation Testing& commissioning No 1.00 29,500.00 29,500.00

Total Amount of Schedule - A5 Electrical- Power supply work, 1,02,18,918.00

Total Amount of Schedule - A5 Electrical- Power supply work, 1,02,18,918.00

7 Schedule - A6 -Air Condition with CAMC - -

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

ITEM – I Supply and Installation No.

7.01 1). Cost for supply of Non Inverter Type 2 TR capacity 3 star rated slim high wall mounting type split air conditioner along with all required

materials and accessories, as per schedule ‘A’. 25.00 45,910.26 11,47,756.50

7.02 2). Cost for installation of Non Inverter Type 2 TR capacity 3 star rated slim high wall mounting type split air conditioner, as per schedule ‘A’ No. 25.00 13,901.58 3,47,539.50

7.03 Charges for Comprehensive Annual Maintenance Contract for 25 Nos. 2 TR, 3 Star rated Split Air Conditioners at various location No.

Note: The CAMC rate is per unit per month.During the CAMC period the firm shall do servicing of Air Conditioners in a period of 3 months (i.e., 4 times

in a year for each AC) and attending break down calls as and when informed by Engineer-in-Charge) a). 1st Year 25.00 4,162.10 1,04,052.40

Total Amount of Schedule - A6 -Air Condition with CAMC 21,66,403.30

Total Amount of Schedule - A6 -Air Condition with CAMC 21,66,403.30

8 Schedule - A7 Pipeline Works - -

Medical Block: 1 Rm (One

8.01 1). Supply and fixing of CPVC Pipeline 50mm dia, Trubore/ Finolex or equivalent (Internal work exposed on wall) wherever necessary including cost of Running Metre)

fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work including all labour, tools, equipment, etc. complete. 450.00 1,018.05 4,58,120.25

2). Supply and fixing of CPVC Pipeline 25mm dia, Trubore/ Finolex or equivalent (Internal work exposed on wall ) wherever necessary 1 Rm (One

Including cost of fittings all as directed at site of work Including all labour, tools, equipment, etc. complete. Running Metre) 400.00 437.66 1,75,064.80

3). Supply and fixing of CPVC Pipeline 25mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making 1 Rm (One

8.03 good the walls etc.) wherever necessary Including cost of fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work Including Running Metre)

all labour. tools, equipments, etc. complete. 100.00 777.03 77,703.00

4). Supply and fixing of CPVC Pipeline 20mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making good the 1 Rm (One

8.04 walls etc.) wherever necessary including cost of fittings, the pipe with clamps at 1.00m spacing all as directed at site of work including all labour, tools, Running Metre)

equipments. etc. complete. 500.00 679.39 3,39,692.50

Surgical Block: 1 Rm (One

8.05 5). Supply and fixing of CPVC Pipeline 50mm dia, Trubore/ Finolex or equivalent (Internal work exposed on wall) wherever necessary including cost Running Metre)

of fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work including all labour, tools, equipment, etc. complete. 350.00 1,018.05 3,56,315.75

6). Supply and fixing of CPVC Pipeline 25mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making 1 Rm (One

8.06 good the walls etc.) wherever necessary Including cost of fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work Including Running Metre)

all labour. tools, equipments, etc. complete. 600.00 777.03 4,66,218.00

7). Supply and fixing of CPVC Pipeline 20mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making good the 1 Rm (One

8.07 walls etc.) wherever necessary including cost of fittings, the pipe with clamps at 1.00m spacing all as directed at site of work including all labour, tools, Running Metre)

equipments. etc. complete. 250.00 679.39 1,69,846.25

8). Supply and fixing of G I. pipeline 50mm dia (C-Class) (Internal work exposed on wall) complete with GI fittings and clamps at 1.00m spacing, 1 Rm (One

including cutting chases and making good the walls wherever necessary all as directed at site of work Including all labour, tools, equipments, etc. Running Metre) 400.00 1,142.48 4,56,990.40

9). Supply and fixing of G I. pipeline 50mm dia (C-Class) (External work) complete with 0.1. fittings, including trenching and refilling etc. wherever 1 Rm (One

necessary all as directed At site of work including labour, tools, equipments, etc., complete Running Metre) 300.00 830.60 2,49,180.60

8.1 10). Supply and fixing of 2" Gun Metal Non-Return Valve (Horizontal) 1 No. 4.00 1,118.64 4,474.56

8.11 11). Supply and fixing of 2" Gun Metal Gate Valve 1 No. 6.00 1,493.88 8,963.28

8.12 12). Supply and fixing of 3/4" CPVC Ball Valve 1 No. 70.00 325.68 22,797.60

8.13 13). Supply and fixing of I CPVC Ball Valve 1 No. 36.00 352.82 12,701.52

14). Dismantling of existing pipeline PVC / UPVC/G.I. of sizes 3/4" Dia , 1" Dia and 2" Dia and shifting to RSA Yard 1 Rm (One

Running Metre) 2,820.00 3.54 9,982.80

RO WATER PIPELINES 1 Rm (One

15). Supply and fixing of CPVC Pipeline 25mm dia, Trubore/ Finolex or equivalent (Concealed work, including cutting chases and making good the Running Metre)

walls etc.) wherever necessary including cost of fittings, fixing the pipe with clamps at 1.00m spacing all as directed at site of work including all labour,

tools, equipments, etc. complete 170.00 777.03 1,32,095.10

8.16 16). Supply and fixing of 1" - CPVC Ball Valve 1 No. 10.00 352.82 3,528.20

Total Amount of Schedule - A7 Pipeline Works 29,43,674.61

Total Amount of Schedule - A7 Pipeline Works 29,43,674.61

9 Schedule - A8 Replacement of Gas pipeline to Kitchen - -

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

1). Supplying and fixing of stainless steel 304 Grade 12 mm dia seamless pipe including valve, manifold, flexiable tubes, etc and connection with 1 Rm (One

cooking equipments including fixing in proper position all as directed at site of work including all labour, tools, equipment, etc. complete. Running Metre) 50.00 3,557.50 1,77,874.97

Total Amount of Schedule - A8 Replacement of Gas pipeline to Kitchen 1,77,874.97

Total Amount of Schedule - A8 Replacement of Gas pipeline to Kitchen 1,77,874.97

10 Schedule - A9 Replacement of Oxygen pipeline system-(i) Medical Block - -

1). Medical Gas Copper Pipeline arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non 1R M

arsenical phosphorous gas copper pipe line with saddles complete with brazing (One Running

work including all copper fitting (tee, elbow, reducer, coupling). The copper pipelines should be tested suitable for a steam of working pressure Metre)

(17 bar) and confirm to BS 864 Standard with specially made for brazed socket type connection. The medical gas copper pipeline should be

tested as per standard and commissioning after painting as per International Code No. IS 2379/1963 Table-V. The pipelines installed at the

various wings and floors etc., complete as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification.

ii).42mm OD X 1.2mm thick 1R M

10.02 (One Running

iii).28mm OD X 0.9mm thick 1R M

10.03 (One Running

iv).22mm OD X 0.9mm thick 1R M

10.04 (One Running

v).15mm OD X 0.9mm thick 1R M

10.05 (One Running

10.06 vi).12mm OD X 0.9mm thick 1R M

10.07 2). SITC of Primary Oxygen Source System. 1No (One

(i)Liquid Medical Oxygen (LMO) tank 3KL Number) 1.00 29,30,333.33 29,30,333.33

10.08 2(ii) VIE Vaporizer 300nm3 1No (One

10.09 2(iii)Stainless Steel Pipe and Flange Tube Workfrom LMO to VIE Vaporizer 1No (One

10.1 2(iv) High Pressuring Regulating System(Working & Standby) for LMO Tank 1Set (One 1.00 76,700.00 76,700.00

10.11 3.SITC of Manifolds ( without Cylinders): 1No (One

(i). Pressure Gauge Number) 4.00 2,812.33 11,249.32

3(ii). Oxygen manifold arrangements of 2 banks x 20 cylinder each wing with semi automatic control panel which includes contact gauge 2 Nos., outlet Each

pressure gauge, brass heavy duty IO x regulator 2 Nos. with suitable adopter, flexible SS Hose. Mainfold shall be of

a construction and of a designs and material suitable for the service pressure in accordance with IS 1282-1989. Emergency alarms with illuminating

display for low / high pipeline pressure and malfunctioning of system.

10.12 1) Mainfold top frame with provision for connecting 12 cylinders on right bank and 12 cylinders on left bank with high pressure interconnecting copper

tubing, silver brazing, non return valve, fasteners and cylinder spport

middle angle frame for claping 2 x 12 cylinders and related fasteners. The O2 manifold should with stand a pressure of 140 kg. / CM2. The installation is

commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 /

4). SITC of Secondary Oxygen Source System: Each

Digital Fully Automatic Oxygen Control System: 3 Source Control Panel with Primary Ist as liquid with PRS system for liquid oxygen and Secondary as

Manifold. The heavy duty control panel to be provided with a flow capacity of approx 2666 LPM at 50 to 60 psi with .CE Certified, ETL Listed / Country

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

5).Compressed Medical Air System: Each

Supply, installation, testing and commissioning of Compressed Air System of Reciprocating

Oil Free Air Compressor Belt Driven Type 10 HP Air Compressor with following provisions.

As per IS 12827 / 1987 & ISO 7396 / 1987 Specification Compressor package consists of following:

a) 10 HP Air Compressor - 1 No.

b) Electric Motor 10 HP - 1 No.

c) Dol Starter - L&T - 10 HP - 1 No.

d) Base Frame Kit (for Motor and Compressor) - 1 set

e) Pressure Swith - 1 No.

10.14 f) Pressure Gauge - 1 No.

g) NRV and Pilot Fittings - 1 No.

h) Delivery Tube - 1 No

i) Foundation Bolts & Anchor Fasteners - 1 Lot

j) Belt Guard - 1 No.

k) Refrigerator Type Air Dryer-40 cfm. capacity-1 No.

l) Drain Ball Valve - 1 No.

m) Air Outlet Ball Valve - 1 No.

Vacuum Room & Air Compressor Room Inside Accessories: Non-Return Valves, Air Pressure Switch,

Pressure Gauge, Isolation Valves, Air Filters etc.,

Inter connecting piping: Mild Steel Pipe of 2 with fittings 1.00 5,96,962.00 5,96,962.00

6).Medical Vacuum System Each

Supply, installation, testing and commissioning of Reciprocating Air Cooled Type (10 HP) Rating Vaccum Pump as per following provisions.

As per IS 12827 / 1987 & ISO 7396 / 1987 Specification

a) Vaccum Pump - 10 HP - 1 No.

b) Electric Motor - 10 HP - 1 No.

c) DOL Starter with OLR - 1 No.

d) Vaccum Switch - 1 No.

e) Vaccum Gauge - 1 No.

10.15 f) Control Frame with Fittings - 1 No.

g) Suction Scrubber - 1 No.

h) V-Belts - 1 No.

i) GI & MS Fittings - 1 No.

j) Brass Fittings - 1 No.

k) Exhaust Silencer - 1 No.

i) Base Frame for Motor and Vaccum Pump - 1 set

m) Pilot Line with Fittings - 1 set,

Vaccum Room & Air Compressor Room Inside 1.00 5,68,288.00 5,68,288.00

7). SITC of ISOLATION CONTROL VALVE: Each

Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with

medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber O' ring, tapion lap and etc. All pipe line regulators

shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be

pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 & ISO 7396 / 1987 Sepecification.

(i) 12 mm ball valve with O-ring Type Both End Adapter 19.00 1,903.73 36,170.86

10.17 ii). 15 mm ball valve with O-ring Type Both End Adapter Each 20.00 1,706.28 34,125.60

10.18 iii). 22 mm ball valve with O-ring Type Both End Adapter Each 6.00 2,594.82 15,568.92

10.19 iv). 28 mm ball valve with O-ring Type Both End Adapter Each 9.00 2,974.78 26,773.02

10.2 v). 42 mm ball valve with O-ring Type Both End Adapter Each 3.00 5,466.94 16,400.82

10.21 vi). 76 mm ball valve with O-ring Type Both End Adapter Each 2.00 39,978.40 79,956.80

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

8). SITC of Area Valve Service Unit (Valve Unit): 1 No.

Area Valve Service Unit (Alarm & Valve Combo Unit) Area valve box with inbuilt touch screen alarm with sensor kit, NFPA Compliance product (one number)

combined valve box assembly with alarm & alarm is ETL listed to UL 1069 and CSA C22.2 No 205 signal equipment.

(i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 5.00 18,290.00 91,450.00

10.23 (ii) 2 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 1 No.

10.24 (iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen, Air 4 Bar and Vacuum) 1 No.

9). SITC of Area Alarm Service Unit (Medical Gas Alarm Unit): 1 No.

10.25 Area Alarm box with touch screen alarm with sensor kit, HTM02-01 Compliance product combined with Medical Gas Alarm (one number)

(i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 5.00 29,696.67 1,48,483.35

10.26 (ii) 2 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 1 No.

10.27 (iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen , Air 4 Bar and Vacuum) 1 No.

10). SITC of Terminal Units: Each

DIN / BS Standard Outlet Points with from loading, inner connecting and brass body. Single press inlet with two stage process first stage for patient usage

and second stage in parking mode, covered by plastic cover duly

colour indicated with specific gas name and non inter changeable for other gases. The cost of materials inclduing transport, etc., complete, as per

standard specification and as directed by the Departmental Officers

(i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 105.00 5,451.60 5,72,418.00

10.29 (ii) 2 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) Each 14.00 5,451.60 76,322.40

10.3 (iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen , Air 4 Bar and Vacuum) Each 15.00 5,451.60 81,774.00

11). SITC of Oxygen Flow Meter made up of Brass with Humidifier Bottle Flow Meter should be back pressure compressed and should Each

be accurate gas flow measurement with control range 0-13 litres per minute. It should meet strict permission and dumbling standard. The meter body

should be made of brass materials. The humidifier bottle should

be made of unbreakable polycorbonate material and auto cleavable at 134 degree centigrate. The rate includes

flow meter and its accessories (silicon tube with mask). The cost of materials including transport, etc., complete as per standard specification and as

directed by the Departmental Officer and as per IS 12827 / 1989 and ISO 7396 / 1987 Specification 85.00 1,922.22 1,63,388.70

12). SITC of Ward Vaccum Unit with Gauge both mounted on a collection jar of capacity 600 ml and with a wall bracket Each

for mounting it on the wall. The collecion jar should be made of unbreakable polycarbonate materials which

10.32 is fully auto cleavable at 134 degree centigrade as per standard specification and as directed by the Departmental Officers and as per IS 12827 / 1989 and

ISO 7396 / 1987 Specification. The rate includes cost of silicon hose with

SS nipple on either sid 15.00 2,301.00 34,515.00

13). Medical gas hose : 1M

10.33 It shall be colour coded for individual services i.e. white for Oxygen, Blue for N2O and Yellow for Vacuum, Black for air. Antistatic rubber tube should (One Metre)

be as per ISO standards. 50.00 1,016.77 50,838.53

14) SITC of Terminal Unit Console Metal Box 1 No.

(i) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Single Gas (one number) 75.00 1,848.67 1,38,650.30

(ii) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for TWO Gas 1 No.

(iii) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Three Gas 1 No.

(iv) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Four Gas 1 No.

Total Amount of Schedule - A9 Replacement of Oxygen pipeline system-(i) Medical Block 89,27,939.77

Total Amount of Schedule - A9 Replacement of Oxygen pipeline system-(i) Medical Block 89,27,939.77

10.38 Schedule - A9 Replacement of Oxygen pipeline system-(ii) Surgical Block - -

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

1). SITC of Medical Gas Copper Pipeline arrangement to hang on the wall of socket type connection installation of seamless 1 RM

cleaned and degreased non arsenical phosphorous gas copper pipe line with saddles complete with brazing work including all copper fitting (tee, elbow, (One Running

reducer, coupling). The copper pipelines should be tested suitable for a steam of working pressure of 17.34 kg. / cm2 Metre)

10.39 (17 bar) and confirm to BS 864 Standard with specially made for brazed socket type connection. The medical

gas copper pipeline should be tested as per standard and commissioning after painting as per International Code No. IS 2379/1963 Table-V. The pipelines

installed at the various wings and floors etc., complete as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987

ii).42mm OD X 1.2mm thick 1 RM

10.4 (One Running

iii).35mm OD X 1.2mm thick 1 RM

10.41 (One Running

iii).28mm OD X 0.9mm thick 1 RM

10.42 (One Running

iv).22mm OD X 0.9mm thick 1 RM

10.43 (One Running

v).15mm OD X 0.9mm thick 1 RM

10.44 (One Running

vi).12mm OD X 0.9mm thick 1 RM

10.45 (One Running

10.46 2.SITC of Manifolds ( without Cylinders): 1No (One

(i). Pressure Gauge Number) 6.00 2,950.00 17,700.00

2(ii). Oxygen manifold arrangements of 2 banks x 20 cylinder each wing with semi automatic control panel which includes contact gauge 2 Nos., outlet Each

pressure gauge, brass heavy duty IO x regulator 2 Nos. with suitable adopter, flexible SS Hose. Mainfold shall be of

a construction and of a designs and material suitable for the service pressure in accordance with IS 1282-1989. Emergency alarms with illuminating

display for low / high pipeline pressure and malfunctioning of system.

10.47 1) Mainfold top frame with provision for connecting 12 cylinders on right bank and 12 cylinders on left bank with high pressure interconnecting copper

tubing, silver brazing, non return valve, fasteners and cylinder spport

middle angle frame for claping 2 x 12 cylinders and related fasteners. The O2 manifold should with stand a pressure of 140 kg. / CM2. The installation is

commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 /

2(iii). Oxygen manifold arrangements of 2 banks x 12 cylinder each wing with semi automatic control panel which includes contact gauge 2 Nos., outlet Each

pressure gauge, brass heavy duty IO x regulator 2 Nos. with suitable adopter, flexible SS Hose. Mainfold shall be of

a construction and of a designs and material suitable for the service pressure in accordance with IS 1282-1989. Emergency alarms with illuminating

display for low / high pipeline pressure and malfunctioning of system.

10.48 1) Mainfold top frame with provision for connecting 12 cylinders on right bank and 12 cylinders on left bank with high pressure interconnecting copper

tubing, silver brazing, non return valve, fasteners and cylinder spport

middle angle frame for claping 2 x 12 cylinders and related fasteners. The O2 manifold should with stand a pressure of 140 kg. / CM2. The installation is

commissioned after testing as per standards and painted as per International Code and as directed by the Departmental Officers as per IS Code 12827 /

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

2(iv). Supply Of Nitrous Oxide Manifold 2+2 Cylinder With Copper tail pipe, Special NRV, Distance piece, Middle frame With Individual Chain 1No (One

Support, Provision For Fixing Fully-Automatic Control Panel Board with the following items : Number)

• Total number for Brass block for NRV – 4 nos.

• Total number for Gas pre heater – 4 nos.

• Total number of Brass Block for Cylinder Valve – 4 nos.

• Non Return Valve - 4 nos.

• Cylinder Valve - 4 nos.

• Block for regulator – 2 nos.

• Double Stage & Double Gauge Regulator – 2 nos.

• Middle frame with chain – 4 nos. 1.00 43,266.67 43,266.67

3). SITC of Oxygen Source System: 1No (One

Digital Fully Automatic Oxygen Control System: 3 Source Control Panel with Primary Ist as liquid with PRS system for liquid oxygen and Secondary as Number)

Manifold. The heavy duty control panel to be provided with a flow capacity of approx 2666 LPM at 50 to 60 psi with .CE Certified, ETL Listed / Country

4).SITC of Primary N2O Main Source System: Each

Digital Fully Automatic Nitrous Oxide Control System: 2 Source Control Panel with Primary Ist as liquid and Secondary as Manifold. The heavy duty

control panel to be provided with a flow capacity of approx 1500 LPM at 50 to 60 psi with .ETL Listed as per ISO 7396 HTM02-01 standard / Country of

5).SITC of Secondary N2O Main Source System: 1No (One

Supply, Installation, Testing, and Commissioning of Single Cylinder Emergency N2O arrangement using a High Flow Double Guage Single Stage Number)

Regulator and 3/4" Control Valve with O-ring Type Adapter for quick release and adopt mechanism using N2O Terminal Unit or NIST with HP Hose,Gas

Pre Heater and NRV. 1.00 29,696.67 29,696.67

6).Compressed Medical Air System: Each

Supply, installation, testing and commissioning of Compressed Air System of Reciprocating

Oil Free Air Compressor Belt Driven Type 15 HP Air Compressor with following provisions.

As per IS 12827 / 1987 & ISO 7396 / 1987 Specification Compressor package consists of following:

a) 15 HP Air Compressor - 1 No.

b) Electric Motor 10 HP - 1 No.

c) Dol Starter - L&T - 10 HP - 1 No.

d) Base Frame Kit (for Motor and Compressor) - 1 set

e) Pressure Swith - 1 No.

10.53 f) Pressure Gauge - 1 No.

g) NRV and Pilot Fittings - 1 No.

h) Delivery Tube - 1 No

i) Foundation Bolts & Anchor Fasteners - 1 Lot

j) Belt Guard - 1 No.

k) Refrigerator Type Air Dryer-60 cfm. capacity-1 No.

l) Drain Ball Valve - 1 No.

m) Air Outlet Ball Valve - 1 No.

Vacuum Room & Air Compressor Room Inside Accessories: Non-Return Valves, Air Pressure Switch,

Pressure Gauge, Isolation Valves, Air Filters etc.,

Inter connecting piping: Mild Steel Pipe of 2 with fittings 1.00 9,72,556.00 9,72,556.00

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

7). Medical Vacuum System Each

Supply, installation, testing and commissioning of Reciprocating Air Cooled Type (15 HP) Rating Vaccum Pump as per following provisions.

As per IS 12827 / 1987 & ISO 7396 / 1987 Specification

a) Vaccum Pump - 15 HP - 1 No.

b) Electric Motor - 15 HP - 1 No.

c) DOL Starter with OLR - 1 No.

d) Vaccum Switch - 1 No.

e) Vaccum Gauge - 1 No.

10.54 f) Control Frame with Fittings - 1 No.

g) Suction Scrubber - 1 No.

h) V-Belts - 1 No.

i) GI & MS Fittings - 1 No.

j) Brass Fittings - 1 No.

k) Exhaust Silencer - 1 No.

i) Base Frame for Motor and Vaccum Pump - 1 set

m) Pilot Line with Fittings - 1 set,

Vaccum Room & Air Compressor Room Inside 1.00 7,53,312.00 7,53,312.00

8). SITC of ISOLATION CONTROL VALVE: Each

Brass Isolation Valve suitable for the copper pipe and should be of non lubricated 90 degree turn lever ball valve of reputed make, conneced in line with

medical gas pipe line system by using suitable size brass valve adopter union, ferrule, nipple, rubber O' ring, tapion lap and etc. All pipe line regulators

shall be capable of controlling pipe line pressure and must compatible with the requirements specified in IS 12827-1989. All valves should be

pneumatically tested for twice the working pressure for the gas line as per IS Code 12827 / 1989 & ISO 7396 / 1987 Sepecification

(i) 12 mm ball valve with O-ring Type Both End Adapter 34.00 1,821.13 61,918.40

10.56 ii). 15 mm ball valve with O-ring Type Both End Adapter Each 13.00 1,706.28 22,181.64

10.57 iii). 22 mm ball valve with O-ring Type Both End Adapter Each 1.00 2,594.82 2,594.82

10.58 iv). 28 mm ball valve with O-ring Type Both End Adapter Each 6.00 2,974.78 17,848.68

10.59 v). 42 mm ball valve with O-ring Type Both End Adapter Each 2.00 5,466.94 10,933.88

10.6 vi). 76 mm ball valve with O-ring Type Both End Adapter Each 1.00 37,232.93 37,232.93

9). SITC of Area Valve Service Unit (Valve Unit): 1 No.

Area Valve Service Unit (Alarm & Valve Combo Unit) Area valve box with inbuilt touch screen alarm with sensor kit, NFPA Compliance product (one number)

combined valve box assembly with alarm & alarm is ETL listed to UL 1069 and CSA C22.2 No 205 signal equipment.

(i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen) 2.00 18,329.33 36,658.66

10.62 (ii) 2 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 1 No.

10.63 (iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen, Nitrous Oxide,Air 4 Bar and Vacuum) 1 No.

10). SITC of Area Alarm Service Unit (Medical Gas Alarm Unit): 1 No.

10.64 Area Alarm box with touch screen alarm with sensor kit, HTM02-01 Compliance product combined with Medical Gas Alarm (one number)

(i) 1 Gas -- VALVE -2 SERVICE-ISO (Oxygen ) 2.00 29,500.00 59,000.00

10.65 (ii) 2 Gas -- VALVE -2 SERVICE-ISO (Oxygen and Vacuum) 1 No.

10.66 (iii) 3Gas -- VALVE -3 SERVICE-ISO (Oxygen , Nitrous Oxide,Air 4 Bar and Vacuum) 1 No.

11). SITC of Terminal Units: DIN / BS Standard Outlet Points with from loading, inner connecting and brass body. Single press inlet with two 1 No.

stage process first stage for patient usage and second stage in parking mode, covered by plastic cover duly (one number)

10.67 colour indicated with specific gas name and non inter changeable for other gases. The cost of materials inclduing

transport, etc., complete, as per standard specification and as directed by the Departmental Officers

(i) Oxygen Gas Terminal Unit with Suitable Probe. 39.00 5,451.60 2,12,612.40

10.68 (ii) N2O Gas Terminal Unit with Suitable Probe. 1 No.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

10.69 (iii) MA4 Air Gas Terminal Unit with Suitable Probe. 1 No.

10.7 (iv) Vacuum Gas Terminal Unit with Suitable Probe. 1 No.

12). SITC of Oxygen Flow Meter made up of Brass with Humidifier Bottle Flow Meter should be back pressure compressed and should Each

be accurate gas flow measurement with control range 0-13 litres per minute. It should meet strict permission and dumbling standard. The meter body

should be made of brass materials. The humidifier bottle should

be made of unbreakable polycorbonate material and auto cleavable at 134 degree centigrate. The rate includes

flow meter and its accessories (silicon tube with mask). The cost of materials including transport, etc., complete as per standard specification and as

directed by the Departmental Officer and as per IS 12827 / 1989 and ISO 7396 / 1987 Specification 40.00 1,922.22 76,888.80

13). SITC of Ward Vaccum Unit with Gauge both mounted on a collection jar of capacity 600 ml and with a wall bracket Each

for mounting it on the wall. The collecion jar should be made of unbreakable polycarbonate materials which

10.72 is fully auto cleavable at 134 degree centigrade as per standard specification and as directed by the Departmental Officers and as per IS 12827 / 1989 and

ISO 7396 / 1987 Specification. The rate includes cost of silicon hose with

SS nipple on either side 15.00 2,301.00 34,515.00

14). Medical gas hose : 1M

10.73 It shall be colour coded for individual services i.e. white for Oxygen, Blue for N2O and Yellow for Vacuum, Black for air. Antistatic rubber tube should (One Metre)

be as per ISO standards.. 50.00 824.03 41,201.47

15) SITC of Terminal Unit Console Metal Box 1 No.

(i) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Single Gas (one number) 20.00 1,632.33 32,646.59

(ii) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for TWO Gas 1 No.

(iii) EGP 1.2mm Thk Metal Powder Coated Box with Printed Aluminium Cover Plate for Five Gas 1 No.

16. SITC of Anesthetic Gas Scavenging System: 1 No.

10.77 (i) Duplex Anesthetic Gas Scavenging System (AGSS) Duplex blower type with 1 working + 1 standby, AGSS duplex Remote switch flush type and (one number)

AGSS transfer and hose(3nos) 1.00 7,58,346.67 7,58,346.67

16. (ii) AGSS Duplex remote switch 1 No.

16. (iii) AGSS Gas Outlet Points 1 No.

Total Amount of Schedule - A9 Replacement of Oxygen pipeline system-(ii) Surgical Block 71,07,650.55

Total Amount of Schedule - A9 Replacement of Oxygen pipeline system-(ii) Surgical Block 71,07,650.55

11 Schedule - A 10 -(I) Fire Fighting System - -

A. FIRE PUMPHOUSE EQUIPMENTS 1 Set (One

1. MAIN PUMPSET: Set)

11.01 Supply and Installation of Electrical 3 phase 415v , 50Hz motor driven Horizontal End Suction Top Discharge Centrifugal pumpset with bronze

impeller, cast iron body rated 137 Cu.m/hr at 70MWC 3000 RPM With Electrical motor of Suitable 75HP, TEFC and complete with all

accessories.For Hydrant System 1.00 3,95,300.00 3,95,300.00

2. STANDBY PUMPSET: 1 Set (One

11.02 Supply and Installation of Diesel engine driven horizontal end suction centrifugal pumpset with bronze impeller, cast iron body rated 137 Cu.m/hr at 70 Set)

MWC.The pump should have RPM between 2150 complete 90HP with all accessories 1.00 7,15,392.70 7,15,392.70

3. JOCKEY PUMPSET: 1 No (One

11.03 Supply and Installation of Electrical 3 phase 415v , 50Hz motor driven horizontal Side suction Top Discharge centrifugal pumpset rated 10.8Cu.M/hr. at Number)

70MWC, 2900-3000 RPM With Electrical motor of Suitable 10HP, TEFC and complete with all accessories For Hydrant system. 1.00 1,40,149.78 1,40,149.78

4. FIRE PUMP PANEL: 1 No (One

a). Autostart panel for the Diesel engine complete auto/ manual switch, indication lamps protective fuses with battery charger, suitable of Number)

11.04 working on 230 V, AC, single phase, enclosure being vermin & dust proof

b). Supply and Installation of MCC with Star & Delta starter for the electrical motor driven pumpset / DOL starter Jockey pumpset

complete with isolator switch, voltmeter, ammeter manual / auto mode switch, indicating lamps etc., 1.00 3,06,564.00 3,06,564.00

11.05 5. Supply and Installation of Cable, Earthing, Cable Tray For the Pumps, Pressure Switchs, Etc., 1 Mtrs (One

a). '3.5 C x 70 sq.mm Al. Armoured Cable Meters) 15.00 548.70 8,230.50

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

11.06 b). 3.5 C x 16 Sq.mm Al. Armoured Cable 1 Mtrs (One

11.07 c). '3 C x 1.5 Sq.mm Copper armoured Cable 1 Mtrs (One

11.08 d). '10 C x 2.5 Sq.mm Copper armoured Cable 1 Mtrs (One

11.09 e). Earthing of the Electrical Motor / MCC (25 x 6 cu.) 1 Mtrs (One

11.1 f). Cable tray with supports (Tray Size 150mm Width x 75mm Height) 1 Mtrs (One

6. Supply and Installation of M.S Pipe 200NB above as per IS 3589 , 150NB and Below as per IS 1239 With Heavy Duty Fittings including 1 Mtrs (One

11.11 cutting,welding and testing to the Following Specifications. Meters)

11.12 b). 150 NB, 5.5 mm thick MS -C CLASS 1 Mtrs (One

11.13 c). 100 NB, 5.5 mm thick MS -C CLASS 1 Mtrs (One

11.14 d). 80 NB, 4.8 mm thick MS- C CLASS 1 Mtrs (One

11.16 7. a).Supply and installation of Y strainer of 150NB with necessary grooved end, nut, bolts & washers, painting, etc. complete as required 1 No (One

11.17 7. b). 80mm dia Y Strianer. 1 No (One

11.18 8. Supply and installation of Foot valve with necessary grooved end, nut, bolts & washers, painting, etc. complete as required 1 No (One

11.19 b). 80mm dia 1 No (One

11.2 9. Priming tank 1000ltrs capacity 1 No.

11.21 10. Supply and Installation of CI Butterfly Valve PN 16 Rating with Matching flanges,gasket,bolts and nuts 1 No.

a). 200 NB - Lever operated (one number) 6.00 9,805.80 58,834.80

11.22 b). 150 NB - Lever operated 1 No.

11.23 c). 50NB -Lever operated 1 No.

11.24 d). 100 NB - Lever operated 1 No.

11.25 11). Supply and Installation of CI Non-Return Valve with Matching flanges 1 No.

11.28 12).Supply & installation of Pressure switch,Pressure gauge, Gunmetal Ball Valve, NRV For Test Array Arrangement including Supporting 1 No.

Arrangement. (one number) 3.00 7,375.00 22,125.00

11.29 b)Pressure guage 0-12 bar 1 No.

11.3 c) 15mm Ball Valve 1 No.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

11.31 d) 25mm Ball valve 1 No.

e) 25mm NRV 1 No.

13). Air Release Valve size & specification should be confrimed by vendor 1 No.

13). a.Drain Valve size & specification should be confrimed by vendor.. 1 No.

14) Painting of the aboveground MS pipes / valves with one coat of metal primer and two coat of fire red enamel paint of approved quality 1 Sq.M

11.35 (one square

15) Supply and Installation of four way fire brigade inlet with 150NB Butterfly valve with matching flanges 1 No.

B. FIRE HYDRANT SYSTEM FOR PROPOSED & EXISTING BUILDING:- 1 Mtr (one

11.37 1. Above Ground MS ERW pipes as per IS:3589/1239, including Heavy class fittings. Metre)

2. Under Ground MS ERW pipes as per IS:3589/1239, Heavy class including fittings. Coating & Wrapping Materials for underground MS Pipes 1 Sq.M

11.4 200mm (one square

3. HYDRANT COMPONENTS: 1 No.

11.41 a). Double headed, Hydrant valve, oblique type 63 mm dia with flanged inlet with blank cap & chain all are should be considered SS as per standard with (one number)

11.42 b). Branch Pipe, short with 63 mm dia instantaneous inlet hexagonal nozzle should be considered SS as per standard with ISI Mark 1 No.

11.43 c). R.R.L. hose of 63mm dia SS Coupling as per IS:636 with ISI Mark 15 Mts.long 1 No.

11.44 d). Hydrant box made of 18 G MS Sheet Size: 750 x 600 x 250 with glass fronted door, painted red outside, white inside 1 No.

4. Supply,installation,testing and commisioning of fire hose reel(as per ISI) wall mounted,swinging type 18 1 No.

11.45 SWG MS sheet,fitted with 20 mm dia into 36 m long, high pressure hose with 5 mm outlet GM nozzle with shut off valve(IS: 884) includes stop cock and (one number)

chrom plated nozzle with all nececssery fixing materials complete. 11.00 7,965.00 87,615.00

11.46 5. 150NB Non Return Valve with matching flanges,Gasket,bolts and nuts 1 No.

11.47 6. CI Butterfly valve as per BS:5155 with matching flanges,Gasket,bolts and nuts 150 NB - lever Operated 1 No.

11.48 7. 25NB Pressure Relief with isolation valve 1 No.

11.49 8. Painting of the aboveground MS pipes / valves with two coats of primer and two coats of fire red enamel paint of approved quality 1 No.

11.5 9. Civil 3 Nos. pumps foundation work and pipe line scoffolding charges. 1 Job. (one Job) 1.00 1,59,300.00 1,59,300.00

11.51 10. civil work core cutting. 1 Job. (one Job) 1.00 56,050.00 56,050.00

11.52 11. Supports made of MS "C" channel, Ms plate, angle and anchor fastener "U" bolts etc., for above 1 Kg.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

C. ADDRESSABLE FIRE ALARM SYSTEMS 1 No.

1. Analogue addressable micro Process - controlled Fire Alarm Control Panels with interfacing box, capable of being to the central monitoring System, to (one number)

monitor and integrated the following quantity of accessories like detectors, MCP's/hooters/control modules, Fault Isolation Modules, hooters, response

indicators, fire/fault indicators, audio-visual signals, central processing units, , complete with LCD display( (640 nos. of characters 8 lines min), zone

indicating LEDs as per the detailed specification: complete with Battery backup for 48 hours in standy mode and 30 minutes in alarm condition. The

system should be capable of detecting fire within 3secs as per UL 9th edition/FM/EN-54 approval with charger for each panel. Each loop should provide

with minimum 252 detectors and devices. Fire panel should be RS-485 communication port and integrate with other fire panel and Repeater panel

11.54 2. Supply, installation, fixing, testing and commissioning of Analog Addressable Smoke detector (photo) with base, Junction box and other accessories 1 No.

as required and Detectors shall be UL listed,(ON CEILING) (one number) 60.00 1,829.00 1,09,740.00

11.55 3. Supply, installation, fixing, testing and commissioning ofAddressable monitor module 1 No.

11.56 4. Supply, installation, fixing, testing and commissioning ofAddressable control module 1 No.

5. Hooter with Control Relay module and storb light with minimum 85 db audiable and control relay module, power supply units etc @ 3m for Audible 1 No.

annunciation and 75cd flashintg at 1 Hz for visual indication with Control Module. (one number) 3.00 5,664.00 16,992.00

6. Manual call points pull stations of approved make with NO/NC contacts slim type and projecting out from the surface of enclosurewith glass suitable 1 No.

for addressable function (one number) 3.00 5,200.01 15,600.04

11.59 7. 2C 1.5 sq mm armoured FRLS cables in celing with suitable clamps and screws (RED colour) 1M

D. P.A. SYSTEM 1 No.

1. Supplying, installing, testing and commissioning of 4-zone selector P.A. console with mounting racks and other accessories. (one number) 1.00 27,730.00 27,730.00

11.61 2. Supplying, installing, testing and commissioning of solid state Amplifier of 480W RMS out put in rack, including necessory control wires, jacks etc. 1 No.

complete. (one number) 1.00 33,630.00 33,630.00

11.62 3. Supplying, installing, testing and commissioning of 12W wall mounted type speakers with mounting fixtures 1 No.

11.63 4. Supplying, installing, testing and commissioning of 2 core of 1.5 sq. mm, Annealed tin copper conductor, PVC Sheathed unarmoured FRLS Cable. 1M

5. Supply, Installation, Testing & Commissioning of 4 Zone Call Station with Gooseneck Microphone 1 No.

6. Excavating trenches by mechanical/manual means of required width for pipes, cables etc., including excavation for sockets, and dressing of sites, 1M

ramming of bottoms, for all depths, including getting out the excavated soil, and then returrning the soil as required, in layers not exceeding 20 cm depth, (One Metre)

including consolidating each deposited layers by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 mtrs for

laying of Pipe, cables etc., exceeding 80mm dia but not exceeding 300 mm dia 50.00 415.36 20,768.00

7. Demolishing of cement concrete/ road cutting manually by Mechanical means including disposal of materials within 50 mtrs lead as per direction of 1M

Engineer- in-charge and back filing with nominal concreate 1:3:6 or richer mix (including equivalent design mix) (One Metre) 50.00 2,872.42 1,43,620.75

11.67 E. Supply and installation of Signage system 1 No (One

1). "FIRE EXIT"(AUTO GLOW)-SINGLE SIDE-FOR FIRE EXIT DOORS-150x300 mm Number) 12.00 377.60 4,531.20

11.68 1 No (One

2. "DIRECTIONAL EMERGENCY EXIT" (AUTO GLOW-DOUBLE SIDE-150x300 MM-FOR INTERNAL AREAS Number) 12.00 413.00 4,956.00

11.69 3. "EXTINGUISHER" SIGNAGES-(AUTOGLOW)-WITH SUSPENSION CHAIN-150x300mm-double side with 1 No (One

suspension chain(SS) Number) 20.00 354.00 7,080.00

11.7 4. "MCP SIGNAGES"-(AUTOGLOW)-WITH SUSPENSION CHAIN-150x300mm-double side with suspension chain(SS) 1 No (One

Total Amount of Schedule - A 10 -(I) Fire Fighting System 75,45,315.15

Total Amount of Schedule - A 10 -(I) Fire Fighting System 75,45,315.15

12 Schedule - A 10 -Fire Fighting System (II) Construction of Low Level Reservoir - -

1.01. Earthwork excavation by manually / mechanically in ordinary soil, sand, clay, mixed wtih roots, boulders, weighing individually less 1M3

than 250 kg. debris, rubbish etc., for foundation of Low Level Reservoir and wherever required, including dressing of sides, ramming of bottom as (One Cubic

12.01 specififed under relevant schedules and drawings, depositing the excavated earth within a lead of 50 m all as directed including shoring, Metre)

shuttering, labour, tools, tackles, equipments, fuel, etc., complete.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

12.02 b. below 1.5 m depth 1M3

c. Dewatering in the excavated area by pumping the water from foundation trench and wherever required using 10 HP motor as per 1Hr (One Hour)

12.03 site condition and as directed including pumping the water carefully without affecting the near by site including all labour, tools, plants,

equipment, transport, fuel etc., complete. 15.00 729.06 10,935.95

1.02 Providing and laying of Plain Cement Concrete of mix 1:4:8 in volumetric proportion (1 cement : 4 CS sand : 8 Hard granite graded 1M3

stone aggregate 40 mm nominal size) for levelling course of Low Level Reservoir and wherever required including mixing, transporting, (One Cubic

placing, ramming, consolidating, curing all as per relevant specifications, drawings and as directed including all labour, cost of cement, materials, Metre)

tools, equipments, etc, complete.

The cost of centering and shuttering will be measured and paid seperately under relevant item of this schedule. 20.00 7,424.56 1,48,491.20

12.05 1.03 Preparing the top surfaces of PCC levelling course, side walls of LLR and wherever required and providing plastering in cement 1M2

mortar 1:5 (1cement : 5 CS sand) 20 mm thick, before laying of tar felt, to the required finish curing etc., all as directed at site of work (One Square

including all labour, cost of cement, materials, tools, equipment’s, scaffolding, etc., complete. Metre) 240.00 518.67 1,24,480.56

1.04 Providing and laying 3 layer of water proofing treatment with bitumen felt over the plastered levelling course, side walls of LLR and 1M2

wherever required consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS:702 applied hot @ 1.45 Kg per square (One Square

metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) all as directed at site of Metre)

work including all labour, cost of materials, tools, equipment’s, scaffolding, etc., complete 240.00 531.89 1,27,652.40

12.07 1.05 Preparing the top surfaces of after laying tar felt LLR flooring area, side walls of LLR and wherever required and providing plastering 1M2

in cement mortar 1:5 (1 cement : 5 CS sand) 20 mm thick, to the required finish curing etc., all as directed at site of work including all labour, cost (One Square

of cement, materials, tools, equipment’s, scaffolding, etc., complete. Metre) 240.00 518.67 1,24,480.56

1.06 Providing and laying RCC of mix in 1:1.5:3 (1 cement :1.5 coarse sand : 3 Hard granite graded stone aggregate 20 mm nominal size) in 1M3

volumetric proportions up to plinth level, for base slab / side wall / beams / top cover slab of LLR and wherever required including mixing, (One Cubic

transporting, placing, ramming, consolidating, excluding the cost of centering, shuttering, finishing and reinforcement all as per relevant Metre)

specification and as directed including all materials,cement, labour, curing, tools, equipments, transport, fuel, etc., complete.

1.The cost of centering and shuttering will be measured and paid seperately under relevant item of this schedule.

2. Supplying, fabricating and fixing in position of reinforcement steel will be measured paid seperately under relevant item of this schedule.

12.09 b. LLR side walls 1M3

12.1 c. LLR Beams 1M3

12.11 d. LLR top cover slab 1M3

1.07 Providing Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 for foundation up to plinth in 1M3

12.12 CM 1:4 (1 cement : 4 CS sand) all as directed at site, including all labour, cost of cement, materials, curing, tools, tackles, equipments, (One Cubic

scaffolding, transport, fuel, etc, complete. Metre) 30.00 8,032.56 2,40,976.65

1.08 Providing centering and shuttering including strutting, propping etc., with steel shutters 1M2

/ spans /props and removal of form for foundations, footings for mass concrete all as directed, including labour,tools,tackles, equipments, scaffolding, (One Square

transport etc, complete. Metre)

a. For levelling course 15.00 427.40 6,410.94

12.14 b. For base slab 1M2

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

12.15 c. For Side Walls 1M2

12.16 d. For Beams 1M2

12.17 e. For Roof Slab 1M2

1.09 Preparing the surfaces of LLR Flooring & Roof Slab and providing plastering in cement mortar 1:3 (1cement : 3 CS sand) 20 mm 1M2

thick and providing ISI certified water proofing material in proportion recommended by the manufaturer / Integral water proofing liquid (One Square

admixture conplast (or) equivalent (160ml /50kg of cement and with neat cement slurry to the required finish, curing etc., all as directed at site of Metre)

work including all labour, cost of cement, materials, tools, equipments, scaffolding, fuel, etc., complete. 150.00 650.18 97,527.00

1.10 Preparing the surfaces of LLR and providing plastering in cement mortar 1:3 (1cement : 3 CS fine sand) with 12 mm thick with ISI 1M2

certified water proofing material in proportion recommended by the manufacturer / with Integral water proofing liquid admixture conplast (One Square

12.19 (or) equivalent (160ml /50kg of cement including finishing with neat cement slurry to the required finish, curing etc., all as directed and Metre)

wherever required including all labour, cost of cement, materials, tools, equipments, scaffolding, fuel, etc., complete.

a. For RCC Side Walls - inside 75.00 488.87 36,665.55

12.2 b. For Beams 1M2

12.21 C. For RCC Side Walls -outside 1M2

1.11 Providing plastering for the Brick work with cement mortar 1:5 (1cement : 5 CS fine sand) 12 mm thick with providing ISI certified water proofing 1M2

material / with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement to the required proportioning as per the (One Square

manufacturer specificaitons, to the required finish, curing etc., all as directed at site of work including all labour, cost of cement, materials, tools, Metre)

equipments, scaffolding, fuel, etc., complete. 130.00 456.54 59,350.46

12.23 1.12 Refilling with available excavated earth in the sides of foundations etc., and wherever required in layers not exceeding 200 mm 1 M3

consolidating the deposited layer by ramming and watering as directed including all labour, tools, equipments, etc, complete. (One Cubic

1.13 Supplying and fixing of orange colour safety foot rest inside the walls of LLR with minimum 6 mm thick plastic 1 No (One

encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 Number)

mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm

12.24 tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard

drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent

identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

CS sand : 6 graded stone aggregate 20 mm nominal size) complete as per design all as directed including all labour, cost of cement, tools, 16.00 633.72 10,139.50

1.14 Providing, casting and fixing in postion of RCC precast Manhole Cover slab 75 mm thick of required size in cement concrete 1:1.5:3 (1 1M3

cement :1.5 CS sand : 3 graded stone aggregate 20 mm nominal size) in volumetric proportion including finishiing the exposed surface, in (One Cubic

cement mortar 1:3 (1 cement : 3 CS sand) 6 to 10 mm thick with a floating coat of neat cement punning all as per relevant specifications and as Metre)

directed at site including cost of cement, mixing, transporting, placing, ramming, consolidating etc, including shttering, struting, curing, equipment,

tools etc., complete.

12.26 1.15 Providing and fixing of PVC pipe 100 mm dia with Cowl / Airvent or nearest size as available in the market all as per relevant 1 No (One

specification and as directed including all materials, labour, tools, equipment, transport, fuel, etc., complete. Number) 1.00 231.28 231.28

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

1.16 Supplying, fabricating and placing in position Fe 500/550 D grade or more HYSD TMT steel bars as reinforcement for all RCC works 1 Kg (One

including handling, cutting, bending and tying in position with 1.25 mm dia black annealed steel binding wire including placing all as per Kilogram)

relevant specification and as directed including all materials, labour, tools, equipment, transport, fuel, etc., complete.

The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be measured

for payment purpose. 8,000.00 117.53 9,40,224.00

1.17 Preparing the surface of external walls of LLR and applying two coats of water proof cement paint of approved brand and shade wherver 1M2

12.28 required over a priming coat with cement primer all as directed including all labour, cost of cement, materials, tools, brushes, tackles, (One Square

equipments, scaffolding etc., complete. Metre) 25.00 123.07 3,076.85

1.18 Loading, transporting and dumping the surplus excavated earth outside the port premises within a lead of 3 km and all as directed including all 1M3

labour, cost of cement, transport, tools, equipments, fuel, etc., complete. (One Cubic

12.29 Note: Metre)

1. The tenderer shall maintain trip sheets in triplicate in Port’s approved format at his own cost for the quantity of earth transported.

2. Payment will be based on the lorry cubical content. 20% deduction for voids to be made. 340.00 298.54 1,01,503.60

Total Amount of Schedule - A 10 -Fire Fighting System (II) Construction of Low Level Reservoir 33,44,816.27

Total Amount of Schedule - A 10 -Fire Fighting System (II) Construction of Low Level Reservoir 33,44,816.27

12.3 Schedule - A 10 -Fire Fighting System (III) Construction of Pump Room - -

1.Dismantling / demolishing the existing brick work in cement mortar by manually 1M3

/mechanically to the required level, size and shape wherever required without damaging the structures nearby including stacking of (One cubic

serviceable materials, collecting and depositing the debris within a lead of 50m for disposal all as per relevant specification and as metre)

directed at site of work including all labour, tools, tackles, equipments, transport, fuel, scaffolding etc., complete 2.00 2,245.54 4,491.08

2. Dismantling the existing Plain cement concrete in lean mix to the required level, size and shape wherever required without damaging the nearby 1M3

12.32 structures if any, and depositing the debris within a lead of 50m for retransportation and disposal all as per relevant specification and all as (One cubic

directed at site of work including all labour, tools, equipment, fuel, transport, etc., complete. metre) 1.00 1,638.67 1,638.67

3.Earth work excavation by mechanical / manual means in ordinary soil, sand, clay mixed with roots, boulders weighing individually less 1M3

than 250 Kg, debris, rubbish etc., as existing at site of work up to 1.5m depth for foundations and where ever required all as directed at site, (One cubic

including dressing of sides ramming of bottom all as per relevant specification and as directed at site including depositing the excavated earth metre)

within a lead of 50 m for transportation including shoring, strutting if required, including all labour, tools, tackles, equipments, fuel etc., 40.00 283.79 11,351.60

4.Providing and laying plain cement concrete of mix 1:4:8 (1 Cement: 4 CS sand : 8 hard granite graded stone aggregate of 40 mm 1M3

nominal size) in volumetric proportions for levelling course in foundations and wherever required all as per relevant specification and (One cubic

as directed at site including mixing, transporting, vibrating, placing, ramming, consolidating, curing, shuttering, dewatering if any etc., metre)

including all materials, cement, labour, tools, plants, equipments, etc., complete 9.00 7,424.56 66,821.04

5. Providing Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 Cement : 1M3

4 CS sand) for foundation and wherever required all as as per relevant specication and as directed at site including all materials, cement, (One cubic

labour, curing, tools, scaffolding, equipments, transport, fuel metre)

6. Providing and laying Reinforced Cement Concrete of mix 1:1.5:3 (1 Cement: 1.5 CS sand : 3 hard granite graded stone aggregate of 20 1M3

mm nominal size) in volumetric proportions for Plinth beam, all as per relevant specifications and as directed including cost of shuttering, (One cubic

12.36 mixing, transporting, placing, vibrating,finishing, curing etc.,including all materials, labour, strutting, tools, plants, equipments, machinery, metre)

fuel, etc., complete.

Note: Steel reinforcement will be measured and paid for separately under relevant item. 6.00 16,616.35 99,698.08

7. Supplying and filling with crushed stone sand for bedding to a required depth in basement and whereever required including ramming, 1M3

12.37 watering consolidation all as per relevant specification and as directed at site including all labour, materials, tools, equipments, fuel etc., (One cubic

complete metre) 5.00 416.84 2,084.18

8. Providing Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:5 ( 1 Cement : 5 CS 1M3

12.38 sand) for super structure and wherever required all as as per relevant specication and as directed at site including all materials, cement, (One cubic

labour, curing, tools, scaffolding , equipments, transport, fuel etc., complete. metre) 25.00 8,754.18 2,18,854.60

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

9. Providing and laying Reinforced cement concrete of mix 1:1.5:3 (1 cement: 1.5CS sand : 3 hard granite graded stone aggregate of 20 mm 1M3

nominal size) in volumetric proportions for RCC lintel all as per relevant specifications including scaffolding, centering, shuttering, (One cubic

12.39 mixing, transporting, placing, vibrating, curing all as directed at site of work including cement, all labour, materials, equipments, tools, plants, metre)

fuel, etc., complete.

Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. 1.00 22,360.53 22,360.53

10. Providing and laying Reinforced cement concrete of mix 1:1.5:3 (1 cement: 1.5 CS sand : 3 hard granite graded stone aggregate of 20 1M3

mm nominal size) in volumetric proportions for R.C.C sunshades all as per relevant specifications and as directed at site of work including (One cubic

12.4 scaffolding, centering and shuttering, mixing, transporting, placing, vibrating, curing including all labour, cost of cement, materials, metre)

Cement, equipments, tools, plants, fuel, etc., complete.

Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. 1.00 14,584.92 14,584.92

11. Providing Reinforced cement concrete of mix 1:1.5:3 (1 cement : 1.5 CS sand : 3 hard granite graded stone aggregate of 20 mm 1M3

nominal size) in volumetric proportions for R.C.C roof beam all as per relevant specifications, and as directed at site of work including (One cubic

12.41 scaffolding, centering and shuttering, mixing, transporting, placing, vibrating, curing, including all labour, cost of cement, materials, metre)

Cement, equipments, tools, plants, fuel, etc., complete.

Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. 3.00 22,728.87 68,186.60

12.Providing and laying Reinforced cement concrete of mix 1:1.5:3 (1 cement : 1.5 CS sand : 3 hard granite graded stone aggregate of 20 1M3

mm nominal size) in volumetric proportions for R.C.C roof slab all as per relevant specifications and as directed at site of work including (One cubic

12.42 scaffolding, shuttering, centering, mixing, transporting, placing, vibrating, curing, including all labour, cost of cement, materials, Cement, metre)

equipments, tools, plants, fuel, etc., complete.

Note: Supplying and fabrication of steel reinforcement will be measured and paid separately under the relevant item. 6.00 21,480.66 1,28,883.97

13. Re-filling with available excavated earth (excluding boulders, rubbish, debris etc.,) in sides of foundation and wherever required in layers not 1M3

12.43 exceeding 200mm in depth all as per relevant specification and as directed at site including consolidating the deposited earth in layer by (One cubic

ramming and watering including all labour, cost of cement,tools, equipments, etc., complete. metre) 10.00 213.70 2,136.98

14.Providing and laying Plain Cement Concrete of mix 1:1.5:3 in volumetric proportion (1 Cement: 2 CS sand: 4 hard granite graded stone 1M3

aggregate of 20 mm nominal size) for Grano flooring with 40mm thick for floor area concrete and wherever required, including necessary form (One cubic

work, shuttering, strutting, mixing, transporting, placing, consolidating,neat cement punning and making thread lines, curing etc., including all metre)

as directed at site of work, including all labour, cost of cement, cement, materials, equipments, tools, plants, fuel, scaffolding, equipments etc., 2.00 16,568.56 33,137.11

15.Preparing the surfaces of ceiling and plastering in CM 1:3, (1 cement : 3 C.S. sand) 6 to 10 mm thick to the required finish wherever 1M2

12.45 required , curing all as per relevant specifications and as directed at site including all materials, cement, labour, tools, equipment, scaffolding, (One square

fuel etc., complete. metre) 85.00 327.45 27,833.25

16). Providing and fixing in position First Class country wood (SAL/ PADAUK )wrought main frames of finished size 95mm x 58mm for 1M3

doors with necessary M.S. hold fasts(40x5mm) 400mm (overall length) long / clamps fixed suitably to the masonry / concrete including (One cubic

12.46 cutting pockets and grouting with P.C.C.1:3:6 ( 1 Cement : 3 CS sand : 6 Hard granite graded stone aggregate of 20mm nominal size) etc,. and metre)

applying two coats of oil type wood preservatives of approved brand and manufacture all as directed at site of work including all

labour, cost of cement,materials, tools, equipments, etc., complete. 0.05 1,79,979.03 8,998.95

17). Providing and fixing second class teak wood 35mm thick panelled shutters frame for doors and fixing with butt hinges of 1M2

required size with necessary screws, including panelling 16mm tk with single leaves / double leaves all complete as per direction of Engineer- (One square

12.47 in-charge / as per chennai port civil engineering manual and drawing (amended )including all labour, cost of cement, materials, tools, metre)

equipments, etc., complete.

Note:- Butt hinges with necessary screws shall be paid separately. 2.10 8,102.82 17,015.93

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

18. Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and 1M2

mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm (One square

for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section metre)

made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever

required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,

comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic

caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically

jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap

12.48 between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality,

all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/

toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:

16231 shall be paid separately.

Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium

channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm

& above) x (50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook

19.Supplying, fabricating and placing in position HYSD (Fe 500/550 grade) TMT steel bars as reinforcement for all RCC works wherever 1Kg (One kilo

required, including handling, cutting, bending and tying with 1.25mm dia black annealed steel binding wire including placing, all as per gram)

12.49 relevant specification, drawings and as directed, including all materials, labour, tools, equipment, transport, fuel, etc., complete.

Note:1.The rate shall be inclusive of cost of reinforcement steel, binding wire and fabrication charges etc., complete. Binding wire will not be

measured for payment purpose. 1,100.00 117.53 1,29,280.80

20. Preparing the surfaces of walls and plastering in cement mortar 1:5 (1 cement : 5 CS sand), 12mm thick to the required finish all as 1M2

12.5 directed at site of work, including cement and other materials, labour, tools, equipments, scaffolding, curing etc., complete. (One square

21. Supplying, fabricating and fixing M.S Grills of required pattern in frames of windows / openings MS Flats, square orround bar 1Kg (One kilo

12.51 etc., including priming coat with approved steel primer scaffolding all as directed at site of work, including all materials cost of cement, labour, tools, gram)

transport , fuel, welding charges etc., complete. 200.00 189.04 37,807.20

22. Preparing the surface of interior walls and applying with Two coats of premium acrylic emulsion paint of interior grade, having 1M2

VOC (Volatile Organic compound) content less than 50 grams/ litre of approved brand and manufacture including applying addtional (One square

coats wherever required to achieve even shade and colour including one coat of primer (Asian/Berger or equivalent) on new walls metre)

wherever necessary all as directed at site of work including all labour, cost of materials, tools, scaffolding, brushes, equipments, etc., complete. 80.00 236.30 18,903.60

23. Preparing the surface of exterior walls and painting ( two or more coat applied @ 1M2

1.67 lit / 10sqm over including priming coat of exterior primer applied @ 2.20kg/10sq.m) coats of Acrylic smooth exterior paint (One Square

of required shade including one coat of primer (Asian/Berger or equivalent) on old/ new walls wherever necessary all as directed at site of Metre)

work including all labour, materials, tools, scaffolding, brushes, equipments, etc., complete. 130.00 175.05 22,756.89

24. Preparing the surfaces of new wooden members and applying with two or more coats over an under coat of suitable primer shade of 1M2

synthetic enamel paint (Asian / Berger / Dulux or equivalent) of approved colour to give an even shade and finish all as directed at site of (One Square

12.54 work including all labour, cost materials, tools, tackles, equipments, brushes, scaffolding etc., complete. Metre)

NOTE:1. Necessary painting co-efficient shall be allowed as per Ch.P.A. engineering manual.

2.The above quantity is inclusive of painting co-efficient 10.00 192.10 1,921.04

25. Preparing the surfaces of Ceiling and applying two coats of white washing using Lovelycem or equivalent to give an even shade all as 1M2

12.55 directed at site of work wherever required including all labour, scaffolding, materials, tools, tackles,equipments, brushes, etc. complete. (One Square

26. Providing and fixing Anodized aluminium fittings (AC 10 grade as per IS:1868)to the door etc., with necessary screws all as directed at 1No.

12.56 site including all materials, labour, tools, screws, equipments etc., complete. (One Number)

12.57 26(b). Tower bolt 150 x 10mm long 1No.

Digitally signed by DEEPAK

Name of Work:"Improvement works to the Medical & Surgical Blocks of Chennai Port Authority's Hospital"

Sl. Quanti including AMOUNT

Item Description Units GST 18% Rs. P Remarks

12.58 26(c ). Butt hinges 125mm 1No.

12.59 26(d ). Anodised aluminium hanging type door stopper - Single Rubber stopper 1No.

12.6 26( e).Hooks and eyes 100mm long 1No.

27. Preparing the surfaces on top of the roof or wherever required and Providing plastering in CM 1:3, 20 mm thick (1 cement:3 CS 1M2

sand) in Terrace portion with Integral water proofing liquid admixture conplast (or) equivalent (160ml /50kg of cement or as equivalent (One Square

all as per manufacturer specification all as per relevant specifications and as directed at site of work including curing, cement,water proofing Metre)

admixture, all materials, labour, tools, equipments, etc., complete 50.00 650.18 32,509.00

Total Amount of Schedule - A 10 -Fire Fighting System (III) Construction of Pump Room 13,19,986.83

Total Amount of Schedule - A 10 -Fire Fighting System (III) Construction of Pump Room 13,19,986.83

Grand Total 9,53,62,802.86

Grand Total 9,53,62,802.86

Digitally signed by DEEPAK