Interior work at the office space of PCI at 3rd floor, tower I, World Trade Centre, Nauroji Nagar, New Delhi-110029

S NO DESCRIPTION AMOUNT AMOUNT

2.00 SANITARY/ PLUMBING WORKS 1,32,689.95 12,37,901.00

3.00 ELECTRICAL WORKS 92,01,533.00 94,74,532.00

7.00 WI-FI & LAN WORKS (ACTIVE & PASSIVE) 0.00 1,93,68,568.00

10.00 FIRE ALARM & PA SYSTEM 12,98,469.00 31,88,914.00

Total (DSR +MR) 21,44,91,009.04

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

1 FLOORING WORKS DSR RATE NON DSR

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

1.01 shuttering-all work upto plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 95.00 CUM 6812.00 647140.00

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved

make for different plenum height with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels

supported on G.I. rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified

and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm

outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the

stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be

fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both

ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions,

the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid

11.54 support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for

1.02 electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of

800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together

(minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust

protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with

lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp

technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated

Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The

panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the

approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of

the panel to ensure the quality of the product.

11.54.2 450mm Finished Floor Height (FFH). 22.56 sq m 5977.35 134849.02

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness

1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13 mm -16 mm,

1.04 MR Toplayer PEFC controlled Core board PEFC controlled Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and 406.66 sq m 7000.00 2846620.00

groove Length Uniclic Width Uniclic Multifit Domestic use Conditions as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer)

with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white

cement and matching pigments etc., complete.

Size of Tile 1200x600 mm

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

CARPET TILES: Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only; Multi-Level Pattern Loop,

manufactured using 100% solution dyeing process, Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site

requirement with SSP® Soil Protection treatment TM or equivalent containing properties of Stain Repel, with Ecoworx® Tile- 100%

PVC Free/ 100% Bitumen Free/ 100% Recyclable - backing system with recycled content, made from thermoplastic polyolefin

compound with reinforcing layer high-performance environments requiring modular flooring, having tufted yarn weight of 542.5

1.06 MR gsm/sqm and average yarn density of Minimum 9143 oz/cu. yd. or more, Nominal total thickness 5.42 mm minimum, Radiant Panel 650.00 sq m 2844.00 1848600.00

class 1 rated (ASTM E648), NBS smoke < 450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture Appearance Retention

Rating of 3.5 for Severe Use, Anti Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor air quality,

including fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354)

0.2 Class D.or equilent as per direction of EIC and site requirement

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener

1.07 11.4 consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed 1056.66 sq m 978.45 1033888.98

@ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of

nosing of steps etc. complete.

ITALIAN MARBLE: Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required

pattern in linear portion of the building all complete as per architectural drawings, with 18mm thick stone slab laid over 20mm

1.08 11.51 (average) thick base of cement mortar 1: 4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm

including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing

etc. all complete as specified and as directed by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 600.00 sq m 6603.35 3962010.00

TOTAL FLOORING WORKS 6038478.52 4998098.80

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre,

one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate

G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including

jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all

as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but

excluding the cost of painting with

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 764.38 sq m 1355.80 1036346.40

WAVE BAFFLE CEILING: To Supply & Install Custom made Vertical curve Polylam Blades Ceilings as per the design intent. The

vertically curve baffle system POLYLAM exhibiting space- delineating characteristics. The system comprises vertically curve baffle

with 75-150mm deep curved rafters manufactured out of 1.2mm Aluminium to provide wave effect. The module for fixing baffle shall

be 150mm centres as per design requirement. The carrier rails run perpendicular to the baffles axis and can be mounted with M6

threaded rods using technical approved fasteners as per EN 13964 standards. The individual baffle lengths between 1200- 2400 mm

can be selected. Baffles lengths less than 1500mm required two carrier rails mounted at the baffle ends. Baffle longer than 1500mm

require additional carrier rails mounted in the centre. Finish RAL Powder Coated.No Pre Coated products shall be accepted. The

spacing of the grid angles is according to the requirements of DIN 18168 and DIN EN 13964 and quality controlled to ISO 9001:2015

approved by SIS & LEED certification by Indian Green Building council (IGBC).

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

METAL CEILING: Providing and fixing GI Plain 13- 15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder

Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to

6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint

2.03 MR having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices 30.45 sq m 2500.00 76125.00

maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS steel sheet.

The edge profile G.I.shall be matching with the panel.

PERFORATED SQUARE ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid

system 300x1200x12.5mm E with Unity 3, square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced

2.04 MR Perforated plasterboard with Cleaneo TechnologyBoard type: Ceiling tile Lengthxwidthxthickness: 300x1200x12.5mmEdge: E 78.87 sq m 3200.00 252384.00

recessed grid system (8mm recess) Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint Colour: White NCS 0701 Y24R,

closet match to RAL 9003; gloss 5 Attachment: Silhouette 15mm face exposed grid. 100 MM Centre to Centre

GYPSUM LOUVERED CEILING: 12.5x600x600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic perforation

as Unity 3 - square 3.5x3.5mm c/c 8.33 type U3.The ROLD 12 tiles with Strip shall be screw fixed on min. 60mm wood or steel

furring. The ROLD 12 with strips tiles are with edge B+ and are pre-painted ready for installation on site. ROLD 12 screws, type Torx

15, with white-painted head are used for screw-fixing. The acoustic ROLD 12 tiles are furnished with a grey (white) absorbent felt

backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887).Colour - White, NCS 0701 Y24R, gloss 5 (standard) or re-paintable

at site with water based acrylic paint.Closest match for repainting: NCS 0700/RAL 9003. Paint Type - Waterbased acrylic emulsion

paint including titanium for hygienic indoor climate. Light Reflection: 69.2% according to DIN Norm 5036.Acoustic Property - αw: 0.95;

NRC: 0.90.Fire Class - A2-s1,d0 .Suspension - The ROLD 12 must be screw fixed to furring of 22 mm wood or 60mm steel battens at

ACOUSTIC CEILING: Providing and fixing suspended Demountable acoustic ceiling in recessed grid system -Danoline : Belgravia

300 x 1200 x12.5mm E with Unity 3,square 3.5mm holes, with 0.80 NRC* Material: High Grade Glassfiber Reinforced Perforated

plasterboard with Cleaneo Technology Board type: Ceiling tile Length x width x thickness: 300x1200x12.5mm Edge: E recessed grid

2.06 MR system (8mm recess) 180.33 sq m 3200.00 577056.00

Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint ,Colour: White NCS 0701 Y24R, closet match to RAL 9003; gloss 5

LINEAR OPEN CELL CEILING: Providing and fixing of Starlum 9 linear cell ceiling made out of Aluminium. The assembled cell

ceiling panels shall be in size of 600x1200mm. The assembled cell ceiling panels shall made out of main blades in 9mm (W) x 40mm

(H) in 1200mm (L), installed at 66.66 mm c.c. and cross connected to secondary blades in 15mm(W) x 37mm (H) in 600mm (L) with

240 mm pitch. The assembled cell ceiling panels are then clipped into U-94 carriers in GMS,coated in black enamelled finished at

1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 carriers are installed then primary

angles made out of GMS, type U1040 are cross connected to the U-94 carriers at 1200mm c.c. for lateral bracing The whole ceiling

2.07 MR shall be suspended by M6 threaded rods installed at 1200mm c.c. The panels are fully downward demountable / hinged from the 730.80 sq m 5200.00 3800160.00

proprietary U 94 carrier section using C 94 spring panels.The system should be in accordance with Material class A2-s1, d0 according

to EN 13501-01 “non-combustible”, as per the Direction of Arch-in-charge. The system will meet fire retardant standards of BS 476:

Part 6 & Part 7. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2015 approved by SIS, LEED

certification by IGBC.All panel modules must be hinge able through wire clips. Finish of cell ceiling panels: Metallic silver in RAL 9006

& RAL 9016 White White colour.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

LOOP CEILING: Providing & fixing LOOP® Type 2 system formed as an open metal ceiling with an open area of more than 50% and

to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight into the

plenum. Bypassing the perforation, the S-shaped sides of the LOOP® interlock both the long and front side joint with a non magnetic

suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y direction. The non-

magnetic suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size 966x1115x1.0mm GMS is

perforated with 60mm deep drawn holes .The substructure consists of a form perforated L profile [U1040] as a lateral grid which is

suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods using official approved dowel plugs.

The grid profiles are to be connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. The

spacing of the grid profile is according to the requirements of DIN EN 13964. On profiles angles, C-band raster as secondary profiles

are bolted on by means of C channel hanger bracket with M6 bolts. Only construction parts approved by the manufacturer may be

used. Provide necessary supports, provisions as per the architects / PM’s Instructions. Tolerances according to TAIM, DIN EN 13964

and quality controlled to ISO 9001:2015 approved by SIS.Finish of ceiling is in RAL 9016 white/ RAL 9006 Silver grey powder coated

with minimum 70-80 microns paint thickness. Manufacturer shall have the fully automatic powder coating system with power and free

conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully automatic inline

Pre-treatment using nano technology, Inline automatic water Drying system after pretreatment.

SMART ACOUSTICAL CEILING PANELS: Providing and fixing Smart Acoustical CEILING PANELS (HEXAGON SHAPE AS PER

APPROVED COLOUR) with square edges made of Polyester fiber substrate 9mm thick with acoustical properties and with an option

of 15 colours as per the choice of the Architect/ Person in-charge, providing a minimum sound absorption level of 0.50-0.90 NRC, to

be affixed to wall/channels using Adhesive. The material should adhere to Formaldehyde emission standards of GB18580-2001 class

2.09 MR E1, asbestos-free, non-toxic, non-irritant and recyclable. Material to have fire resistance as per B1 Chinese standards. The sheets to 43.20 sq m 5765.00 249048.00

have density of 184 kg/m3 and weight of 1.64 kg/m2. The sheets to be made available as per the design approved by Architect/

Person in charge. Cutting to be in done by supplier using laser cutting or blade cutting as per requirement.

HEXAGON: 1200x1200 WITH 1.61 SOUND ABSORPTION

TOTAL FALSE CEILING WORKS 1036346.40 8031105.44

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED DOUBLE GLAZED GLASS PARTITION) : Supply & Insallation Supply & Installation of Modular Double

glazed partitioning frame of 100mm System, (100mm x 25mm) as wall starter and top section, Using (100mm x 25mm) as wall starter

3.01 MR and top section, Using (100mm x25mm) as bottom channel. Glass to Glass butt joint with I, L & T profiles. 10mm + 10mm thk clear 63.26 sq m 11531.00 729451.06

toughened glass. Required accessories like Gasket and Adhesive tapes as per standard partition height upto 2500mm.

FRAMED HINGED GLASS DOOR: Supply and Installation of Modular Aluminium single leaf stile door frame of make 100 mm System,

3.02 MR using (100mm x 25mm) as door frame, using for Stile door Shutter 75x45mm with 5mm + 5mm thk clear thoughened Glass. All 20.00 sq m 33554.00 671080.00

hardware shall be included in the item.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

9.1 and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

3.03 separately).

9.1.1 Second class teak wood 0.63 cu m 142949.70 90058.31

WOODEN BATTERNS : Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and

3.04 drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 2.30 CUM 187277.65 430738.60

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains

3.05 or cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 38.64 SQM 2392.65 92452.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

Providing and Fixing 600-900 mm or equivelent D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of

approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per the

direction of Engineer-in-charge.

Providing and Fixing Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

3.09 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 17.00 Each 9354.00 159018.00

Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.10 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm 51.00 EACH 228.85 11671.35

3.11 MR Providing and Fixing top and Bottom Strap of approved make and model all complete as per the direction of Engineer-in-charge. 17.00 Each 1007.00 17119.00

Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved make and model all

complete as per the direction of Engineer-in-charge.

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce

Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having

minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch

(0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) .

Providing and fixing Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 14.5 mm thick random

Grooved wooden acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design /

Architects’ approval, the wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm GW

3.15 MR of 48kg/m3).the edge of panel shall be Tounge and groov to be fixed with clips on aluminium profile designed specially fo the panel. 112.98 SQM 5253.00 593483.94

the panel will be mounted with the help of clips on Bollard Aluminium extruded Keel. The grooved acoustic panel laminated in

desired shade as per Engineer In charge / Architect’s approval.

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA rated lacquered glass

from Saint-Gobain) of approved color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon /

double sided tape) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the

RCC wall/any other structure. Lacquered glass must be made industrially (via curtain coating process); opaque (if viewed against a

3.16 MR support wall), coated with PU lacquer (50 micron thick); color consistency (measured by Minolta spectrophotometer CM5081); highly 300.64 SQM 5112.00 1536871.68

durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant (conforms to BS EN 1036 1999);

environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled content (12% post industrial / 6% post

consumer); compressive strenght (1000 MPa) & tensile strenght (40 MPa),same as float glass;

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor

and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50

mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia

bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws

9.105 with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall screws

3.17 on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints

staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided

at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape, angle beads at corners (25mmx25mmx0.5mm), joint finisher and two coats

of primer suitable for board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming

to IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING: Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab

& celling, cladded with Acrylic Solid Surface 12mm thick sheets straight fabricated on a single face, finished in matte finish, pasted

with industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per

3.18 MR structural requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design 34.50 SQM 14295.00 493177.50

and dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided,

along with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

Providing and Fixing of Window Blinds as per the approved sample consisting of Duette double honeycomb shades with easy rise

TOP DOWN BOTTOM UP (TDBU) operating system as per following specifications:

FABRIC SPECIFICATIONS:

• Black Out original Non-woven honeycomb shades having soft fabric appearance and high energy-efficient fabric with high tear

strength constructed out of Anti static, resilent, colour fast & Sanitized Treat 100% spun bonded non-woven polyester fiber& precision

manufacture to form a hexagonally shaped duette pleat. The Fabric is GREENGUARD certified and can attain an NRC value of 0.75.

Certificates to be provided at the time od delivery of material at site. Pleat dimension ¾ ”Honeycomb within a Honeycomb” with 3 air

pockets for maximum energy effeciency.

• Shadings are duotone, with neutral tone facing the exterior and color facing the interior. In the TDBU mechanism the customer gets

the flexibility of having the top rail down as well as the bottom rail to the top position. Even the rails can be stacked in between as an

intermediately position where in the user has a option to stack the blind anywhere he wants. The HEADRAIL shall measure 49.68 wide

and 36.66mm deep & thick 1.27mm extruded from 6063 T6 alu. alloy & shall be powder coated to a smooth finish with a thickness of

3.19 MR 40 microns. FABRIC shall be constructed from spun-bonded polyester fibre, precision manufactured to form a hexagonally shaped, 70.00 SQM 24177.00 1692390.00

dual pleat, cellular construction. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal

cells is formed individually, pleats operate independent of each other providing superior pleat retention & structure strength.

INSTALLATION BRACKETS shall be of high tension spring steel suitable for overhead & wall mounting 30mm Duette Hartford

mounting bracket. Head rail covered with Sydney Valance of height 80mm made up of Aluminium & L shape moving Rail includes

"Click & Engage" method of dimension 50mmX55mm sticked with integerated moving rail magnets provide a streamlined look,

reduce centre light gap, and promote easier operation. POLYESTER CORD shall be 0.9mm in diameter & of woven hollow core

ENDCAP shall be molded acrylic color matched to the head & bottom rails. BOTTOM RAIL shall be a single channel section,

measuring 30mm wide and 12.5mm deep & thickness 1-1.2mm extruded from 5005 H-16 alu. alloy & shall be powder coated with a

smooth finish to a thickness of 15-25 microns. HOLD-DOWN BRACKET (optional) shall be molded in clear acrylic. It incorporates a

pin for engagement with the bottom rail end-cap. It shall be suitable for sill, face or side facing. CORD EQUILISER shall be injection

molded from impact modified acrylic with a high flexural modulus.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

Providing & supplying of Window Blinds as per the approved sample Duette double honeycomb shades having “honeycomb within

honeycomb” with easy rise operating system as per following specifications fabric specifications:

• Original Non-woven honeycomb shade shaving soft fabric appearance and high energy-efficient fabric with high tear strength

constructed out of Anti-static, resilent, colour fast & Sanitized Treat 100% spun bonded non-woven polyester fiber & precision

manufacture to form a hexagonally shaped duette pleat. The Fabric is GREENGUARD certified and can attain an NRC value of 0.75.

Certificates to be provided at the time of delivery of material at site. Pleat dimension ¾ ”Honeycomb within a Honeycomb” with 3 air

pockets for maximum energy efficiency.

• Shadings are duotone, with neutral tone facing the exterior and color facing the interior The Head rail. Shall measure 50 wide and

35mm deep & thick 1.25mm extruded from alu. alloy& shall be powder coated to a smooth finish with a thickness of 40 microns.

Fabric shall be constructed from spun-bonded polyester fiber, precision manufactured to form a hexagonally shaped, dual pleat,

cellular construction. All cords & cord holes shall be fully concealed inside the fabric structure. As each of the hexagonal cells is

formed individually, pleats operate independent of each other providing superior pleat retention & structure strength. Installation

brackets. shall be of high-tension spring steel suitable for overhead & wall mounting 30mm Duette Hartford mounting bracket. Head

rail covered with Sydney Valance of height 80mm made up of Aluminium & L shape moving Rail includes “Click & Engage" method of

dimension 50mmX55mmsticked with integrated moving rail magnets provide a streamlined look, reduce centre light gap, and promote

easier operation. Polyester cord. Shall be 0.9mm in diameter & of woven hollow core end cap shall be moulded acrylic color matched

to the head & bottom rails. Bottom rail shall be a single channel section, measuring 30mm wide and 12.5mmdeep & thickness 1-

1.2mm extruded from alu. Alloy & shall be powder coated with a smooth finish to a thickness of 15-25 microns. Hold-Down bracket

(optional) shall be molded in clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It shall be suitable for sill,

face or side facing. Cord Equalizer shall be injection melded from impact modified acrylic with a high flexural modulus

Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane size having head rail,

rotator rail and bottom rail made of aluminium alloy extruded profile, powder coated and provided in standard natural white color. The

rolling tube should be made up of aluminium alloy from extruded profile. The head rail dimensions should be of suitable size according

to the length of head rail and space available and finished with fabric cover matching with the louver fabric. The cassette should

conceal the working mechanism rotary-clutch. (White polycarbonate spring tempered rotary clutch which raises), lower and tilts the

blinds. White polycarbonate limit assemblies control vane over-rotation, located on either side of individual blinds. The room darkening

3.21 MR fabric of Blind should be of anti-static polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. 245.00 SQM 18277.00 4477865.00

Sheer layers should be of white 100% knit polyester, the colors, textures and opacities as approved. The fabric shall be made of spun-

bonded 100% polyester fibre (having green guard certification) treated with soil & dust repellent requiring minimum regular interval

cleaning. GREEN GUARD Gold certified for low-emitting products to maintain Indoor environment. Upto 80% ultraviolet protection with

vanes open and 90% with vanes closed. The shading to be operated by Easy rise mechanism with a continuous cord loop operating

system. All parts, components & hardware are in approved shade as per direction of Engineer-in-charge.

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details

of Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate.

AAC WALL (150 MM): Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/ 300mm thick AAC

blocks in super structure above

plinth level up to floor V level with RCC band at sill level and lintel level

3.23 6.47 with approved block laying polymer modified adhesive mortar all 183.09 Sqm 8333.65 1525807.98

complete as per direction of Engineer-in-Charge. (The payment of RCC

band and reinforcement shall be made for seperately).

3.24 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. 183.09 Sqm 104.80 19187.83

13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

13.48A Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10

PLY: Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and

3.28 fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type 1570.65 SQM 1224.65 1923496.52

4mm THICK MDF BOARD: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved

3.29 MR primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board 1049.65 SQM 315.00 330639.75

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to

3.30 MR centre both ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 50mm 1671.36 SQM 1347.00 2251321.92

thick polyester synthetic insulation as insulation of 100 GSM.

Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on

unexposed surface etc., complete.

3.32 MR WALLPAPER: Washable Vinyl Coated Wall covering as per approved make and pattern as approved by the client 150.00 SQM 1500.00 225000.00

TOTAL WALL FINISHING WORKS 7337626.20 14964744.19

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves

should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and

drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters

4.01 MR finished in high gloss acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs 5.07 SQM 10000.00 50700.00

which will be covered with PVC skirting in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the

floor/ wall/slab using metal screws of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of

boxes shall be considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to

1000X560X710MM (approx.) and join together as per site requirements etc.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves

should be supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and

4.02 MR drawers fascia shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters 3.38 SQM 8000.00 27040.00

finished in high gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw

plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment.

Cabinet boxes size would be varies from 400x560x710MM to 1000x560x710MM (approx.) and join together as per site requirements

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels 10.00 Each 3548.00 35480.00

4.02B MR Providing and fixing baskets 10.00 Each 4013.00 40130.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal surface.

4.03 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended 16.66 SQM 769.60 12821.54

proportion including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other

with bitumen @ 1.7 kg/sqm).

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc.

4.04 MR and for prepration of as built drawing any other details as and when desired by Engineer Incharge/ client. A qualified professsional for 1.00 LS 1900000.00 1900000.00

the purpose shall be appointed after due appproval from Engineer InCharge.

ECORESIN PANEL: Providing of Ecoresin panel of size 1220mm x 2440mm with variety of inlay between panels of specified Gauge.

The panels are made from ecoresin sheet with engineered polyester resin with a thickness of 5/ 6.3 mm (+/- 5%)with a top/ bottom

finish as sandstone finish. The product conforms to Class A impact rating in accordance as measured under ASTM standards is

4.05 MR GreenguardTM Indoor Air Quality certified and has a minimum of 40% post-industrial recycle content certified by a recognized 3rd 3.00 Nos. 374683.00 1124049.00

party certification group, such as Scientific Certification Systems (SCS). The design of the product is based on Varia produced with

ecoresinTM as per approved make as per specification & approval of Engineer-in-charge.

Providing and Fixing Dyson Air purifier, Fan, all in one Vacuum filled HEPA filters air purifiers an advanced HEPA H13 filtration

system that captures gases and 99.95% of particles as small as 0.1 microns. For gases grid matrix turbulent flow carbon based

chemically dosed filter. Air purifiers have powerful Air Multiplier™ technology to purify the whole room. (700-800 sqft per machine

ZINC CLADDING: Supply & Installation of ZINC Titanium (conforming to EN 988 stndards) Interlocking wall cladding panels in

VMZINC Pigmento Finish. The wall cladding system shall comprise of the following as described .ZINC 0.8 mm interlocking panels of

233 mm width and max 2000 mm length. Panels are formed with interlocking lap at panel edges and smooth, flat pan; designed to be

field assembled in sequential installation by engaging edges of each panel to edge of adjacent panel. Panels are attached to

4.07 ` supports/substrates using stainless screws located under edges of the panels The Panels Shall be Installed over the Aluminium box 100.00 SQ M 17360.00 1736000.00

Section of 50x25x1.6 mm thick @ 600mm c/c horizontal and vertical with Screws/ Rivets of suitable size as recommended by

manufacturer .THe zinc titanium manufacturer shall have regisetered office in India and shall have supplied zinc titanium cladding to

government projects in last 5 years . Installation to be carried out by manufacturer approved installation agencies who has completed

zinc cladding projects in India.

4.08 MR Supply & Installation of ZINC Flashings in same finish and material for corners, top, botom, site detailing 12.00 RM 3139.00 37668.00

TOTAL MISCELLANEOUS WORKS 12821.54 6658067.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2023 DSR (INR) NON-DSR (INR)

MR 1 Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN EACH 5 16080.00 80400.00

MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)

MR 2 Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE: EACH 5 20890.00 104450.00

MR 3 Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING EACH 5 2398.00 11990.00

32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

MR 4 Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL EACH 5 3284.00 16420.00

PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES &

MR 5 Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL EACH 5 15087.00 75435.00

HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 5 6641.00 33205.00

MR 7 Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL EACH 5 4823.00 24115.00

MR 8 Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH EACH 5 4965.00 24825.00

ADJUSTABLE WITH WALL FLANGE 15mm

MR 9 Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH EACH 5 2541.00 12705.00

8mm DIA 1.2 METER LONG FLEXIBLE TUBE

AND WALL HOOK ALD-CHR-573 or equivalent

MR 10 Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM EACH 5 8044.00 40220.00

CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE

CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

17.28 11 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

17.31 12 Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick EACH 5 1607.95 8039.75

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

18.53 13 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 20 574.30 11486.00

17.61 14 Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 15 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 5 416.80 2084.00

18.78 16 Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching METRE 5 202.90 1014.50

surface after housing G.I. pipe etc.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2023 DSR (INR) NON-DSR (INR)

18.7 17 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes METRE 60 335.00 20100.00

18.7.3 25mm nominal outer dia pipes METRE 60 401.55 24093.00

18.7.4 32mm nominal outer dia pipes METRE 10 518.75 5187.50

18.7.5 40mm nominal outer dia pipes METRE 10 702.95 7029.50

18.7.6 50mm nominal outer dia pipes METRE 10 934.15 9341.50

18.8 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 30 497.80 14934.00

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10752.00

18.8.3 25mm nominal outer dia pipes METRE 10 627.25 6272.50

18.8.4 32mm nominal outer dia pipes METRE 10 739.30 7393.00

18.51 19 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 1 798.95 798.95

MR 20 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 80.00 536.00 42880.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2023 DSR (INR) NON-DSR (INR)

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20.00 416.00 8320.00

MR 21 Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

MR 22 Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 11 536.00 5896.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 11 726.00 7986.00

MR 24 Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round EACH 11 1001.00 11011.00

cover with screws and other required fitting complete as required.

MR 25 Supply, Installation, testing and commisioning of toilet waste water super quiet portable EACH 5 67430.00 337150.00

pumping station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical

shaft with inlet connection in portable pump side inlet of 50, 75, 110 as per requirement to

complete the work as per the directions of engineer in charge

MR 26 Providing and fixing stainless steel tray below sewage pipe of size 200x200x200 mm of grade METRE 40 3629.00 145160.00

SS304 including all accessories

MR 27 Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED EACH 1 18938.00 18938.00

DIVERTOR FOR BATH & SHOWER

MR 28 Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER EACH 1 9377.00 9377.00

MR 29 Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND EACH 1 24100.00 24100.00

EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 5 12004.00 60020.00

MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 1 4392.00 4392.00

MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 5 4309.00 21545.00

MR 33 Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH EACH 5 15653.00 78265.00

MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 5 2045.00 10225.00

MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 5 4978.00 24890.00

MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 1 3336.00 3336.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface

1.55 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 18160 334.00 6065440.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 1012 122.00 123464.00

1.24.5 6 pin 15/16 amp socket outlet Each 49 197.00 9653.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 200 40.00 8000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 300 1005.00 301500.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 300 1365.00 409500.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(b) 3.5 C x 95 Sqmm XLPE cable RM 100 864.00 86400.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 100 680.00 68000.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 100 510.00 51000.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 100 378.00 37800.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.3 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 1200 1446.00 1735200.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 100 2253.00 225300.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable RM 50 2686.00 134300.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 16 9081.00 145296.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 4 577.00 2308.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

E.3 MR along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 2 12106.00 24212.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

E.4 MR Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for Set 2 6803.00 13606.00

headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

Supply, installation, testing & Commissioning of flat support plate 8 module for integration of

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2)

E.6 MR modules for Floor Box Set 4 1533.00 6132.00

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 16 148.00 2368.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 150 3603.00 540450.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 100 2960.00 296000.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at

the intersection of raceways supplied completely with base and cover plates, height adjustable

MR junction box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect

as per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 480 47.00 22560.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors

4.1 suspended from the cieling with MS suspenders including bolts and nuts painting suspenders

etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 100 1137.00 113700.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of SET 10 13838.00 138380.00

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -6 Nos.

(b) 40 Amps, TPN, MCB - 8 nos

Panel complete as above Each 2 200000.00 400000.00

15 MR UPS Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Three (3) nos, 63 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

2 Nos. 100A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's

along with E/M interlocking

(a) 63 Amps, TPN, MCB - 2 nos

(b ) 40 Amps, TPN MCB - 4 nos

Panel complete as above Each 2 314297.00 628594.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

16 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00

front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

17 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00

front side as required

MR Supply, Installation, Testing and Commissiong of 20 KVA True Online Double Conversion UPS

3Phase Input - 3Phase Output in Parallel Redundant N+1 Configuration IGBT Based Rectifier

and IGBT Based Inverter Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of

15600 suitable for 30 minutes backup with each ups Along with Accessories Rack, Interlinks,

18 SFU, Parallel Kit, DC Cable Upto 5 Meters complete in all respect as per the directions of the Nos. 4 764186.00 3056744.00

engineer in charge. UPS should have availability of Input /Output isolator, Inbuilt manual

bypass along with phase sequence corrector. UPS Efficiency shall not be less than 94% from

25% to 100% Load

Total of Electrical items 9201533.00 9474532.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR AMOUNT

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator

made of 22G GI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass wool

1.0 covered with tissue paper ,elliptical volume control damper , calibrated differential pressure sensor

(DPT sensors) at inlet complete with digital Thermostat.(All VAV shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

MR 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 35 HP or as directed by the engineer in charge Nos. 1 180000.00 180000.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted

3.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 4 17500.00 70000.00

respective VFDs as per "Approved Shop Drawings".

Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline fans for exhaust

air complete with sheet metal casing, 25mm thick acoustic insulation, direct driven centrifugal fan,

motor with proper protection and inspection door. Fan shall be suitable for operation on 220+6 %

volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both sides to facilitate duct

connections. Fan shall be installed as shown in the drawings and will be of following characteristics:

4.0 All single phase inline fans shall be provided with factory fitted speed regulators. All Fans Should be

complete with Plug Top & necessary power cable.

Fans shall have low noise level in rage of 35-40dBA @3m and shall be suitable for indoor installations.

a 200 CFM S P of 13-14 for Toilet Nos. 5 6449.00 32245.00

5.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity

with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the

MR impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete as

a required. This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in all

respect as per the directions of engineer in charge.

9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 6 143910.00 863460.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR AMOUNT

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return

air path as and where required of required sizes i/c control wiring,the damper shall be motorized and

spring return so as to close the damper in the event of power failure automatically and open the same

6.0 16.20 in case of power being restored. The spring return action shall be inbuilt mechanism and not externally

mounted. The damper shall also be closed in the event of fire signal complete as required and as per

specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

7.0 MR Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

8.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume control dampers as per the specifications and

a shop drawings. SQM 15 5900.00 88500.00

- For Rectangular Ducts

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/

round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

9.0 16.12.1 supports etc. as per approved drawings and specifications of following sheet thickness complete as

d 16.12.1.4 Thickness 1.25 mm sheet SQM 50 1836.00 91800.00

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

10.0 16.15 control dampers as per specifications. SQM 20 9105.00 182100.00

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

11.0 16.16 volume control dampers complete as required SQM 40 5910.00 236400.00

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

13.0 16.18 volume control dampers with anti smudge ring & removable core. SQM 20 8121.00 162420.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR AMOUNT

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

14.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 100 1440.00 144000.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings

and specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so

there are no visible joints. Slot diffusers shall be complete with end caps either as end plates or end

angles or integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser

15.0 MR face could be optionally be fitted to the plenum box on site. Diffuser shall have provision to access

collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade. SQM 10 12500.00 125000.00

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of

16.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen SQM 10 5436.00 54360.00

to be got approved from consultants and Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The

16.23 joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre

18.0 16.21 to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet SQM 100 708.00 70800.00

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc.

complete as required and as per specifications

Supply, Installation, Testing and Commissioning of Air Purification systems in the specified areas

where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air

quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters. The Needlepoint

brushes shall be designed to properly release equal amount of positive and negative ions in the supply

air,>400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM,

with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will

indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have

weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and

backed with Independent lab test reports on the real virus and not surrogate. The system also should

reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be

UL 2998 listed with zero Ozone Emission.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR (E & M- Non DSR

S NO DESCRIPTION UNIT QUANTITY RATE DSR AMOUNT

2022)/ MR AMOUNT

Smart Indoor Air quality monitor to measure Air quality parameters including AQI, PM1, PM2.5, PM10,

CO2, Humidity and Temperature. In addition to the mentioned sensors of the base device, you can

customize it to measure more parameters by adding extra sensors. This monitor should be a 3-tier

architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including

dashboard, android/IOS apps, where ever requires. Dashboard should be customisable and IOT

20.0 MR (Internet of things) enabled with view and management for all of your locations on one dashboard so

that you can easily identify and address any air quality issues. Sensors should be soft calibratable. The

System should be capable of providing periodic Preventive maintenance for automated after sales

support service in form of notification/ alerts and user interaction through dashboard application.

Air Quality Monitor Nos 1 7580.00 7580.00

Supply, installation testing and commissioning of Router / Supervisory Controller which will manage the

VAV information and communicates on BACnet®/ LONWORKS® protocol to monitor and Control the

VAVs from BMS software on PC in accordance with the approved shop drawings and technical

specifications. Connecting the final daisy loop from all VAV to Supervisory Controller shall be part of

21.0 MR the scope. The communication between Supervisory controller and BMS software in PC should be on Nos 1 218928.00 218928.00

IP. Cost include powder coated Panel for Supervisory Controller of required size with 24 Volts

provision which includes power cable, plug, transformer and with all necessary accessories for

mounting on wall in accordance with the approved shop drawings and technical specifications.

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper

22.0 MR ferrules, lugs and other necessary accessories. The spec shall meet the system manufacturer Rmt 630 120.00 75600.00

specifications.

Supply, Laying, Termination of ISI Certified 4 Core 1.0 sq.mm ATSC, FRLS ,PVC insulated,

Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with proper

23.0 MR ferrules, lugs and other necessary accessories. The spec shall meet the system manufacturer Rmt 420 280.00 117600.00

specifications.

Supply & Laying of ISI Certified 1" dia PVC Conduit with bends, collar, saddles, saddle base and other

accessories for Signal Cable / DDC Communication Cable

TOTAL HVAC WORKS 4006864.0 3345901.0

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 42 16415.00 689430.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not

less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C

WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

3 3.0 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire on

receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

5 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 245.00 9800.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 220 331.00 72820.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 40 466.00 18640.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 220 588.00 129360.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 75 707.00 53025.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 75 865.00 64875.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1022.00 51100.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1108.00 55400.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Cable Trays with Covers

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

7 4.6 (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

7.1 4.6.8 300mm widthx62.5mm depthx2.0mm thickness meter 100 1190.00 119000.00

7.2 4.6.10 450mm widthx62.5mm depthx2.0mm thickness meter 100 1574.00 157400.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

8 MR fittings such as bends tees etc. and duly insulated.

40 mm dia (9 mm tick ins.) Rm 260 374.00 97240.00

Supply, Installation, Testing and Commissioning of Central Advance Intelligent Control

Manager with touch color LCD Display, Suitable for automatic control of all indoor units by

9 MR schedule function, troubleshooting, auto heat/cool changeover, temperature limitation, history Each 1 115345.00 115345.00

function, etc., complete as per technical specifications, capable of connecting upto 64 nos.

indoor units as required.

Total HVAC WORKS 1969814.00 369798.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: IT

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No Description UNIT QUANTITY RATE

A. UTP Components for Data DSR (INR) NON-DSR (INR)

Supply, Fixing & Laying of CAT 6A UTP cable 23 AWG solid copper

1 conductors for Connectivity of Hub room to End Point.High Speed Gigabit Mtr 29550 72.00 21,27,600.00

Ethernet U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6A cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 2 Mtr (7

3 feet) for information outlet (I/O) to end user device connectivity.High Speed Nos. 591 350.00 2,06,850.00

Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6A patch cord 1 Mtr (3

4 feet) for information outlet (I/O) to Rack End Redantant device Nos. 591 279.00 1,64,889.00

connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel

for CAT6A cable termination at rack end. Data Active

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors

6 for Connectivity of Hub room to End Point.High Speed Gigabit Ethernet Mtr 14100 38.00 5,35,800.00

U/UTP, 250 MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

termination at Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3

9 feet) for information outlet (I/O) to end user device connectivity. (Rack end), Nos. 282 235.00 66,270.00

High Speed Gigabit 26AWG Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7

10 feet) for information outlet (I/O) to end user device connectivity.High Speed Nos. 282 275.00 77,550.00

Gigabit 24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 2 Port British Style

Shuttered Face Plate white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred

Jack Panel for CAT6 cable termination at rack end. Riser Active

Supply , Installtion , Testing and Comissioning of 400 pair MDF box complete

with Krone Modules

14 Supply , Installtion , Testing and Comissioning of 50 pair riser cable Mtr 200 600.00 1,20,000.00

C. Backbone Component

15 Supply , Installtion , Testing and Comissioning of 6 core OM3 Multimode fiber Mtr 200 250.00 50,000.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: IT

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No Description UNIT QUANTITY RATE

Supply , Installtion , Testing and Comissioning of OS2 G.652.D 1-fibre,

buffered, LC Duplex, LC to pigtail, 1m.

Supply , Installtion , Testing and Comissioning off Rack mount fibre tray

17 supporting 6 way configuration in LC Duplex. Panel should be loaded with 6 Nos. 2 82,500.00 1,65,000.00

port LC duplex adaptor panel

Supply , Installtion , Testing and Comissioning off Rack mount fibre tray

18 supporting 24 way configuration in LC Duplex. Panel should be loaded with 24 Nos. 1 1,48,600.00 1,48,600.00

port LC duplex adaptor panel

D. Network Rack and Other Accessories

SITC of 42U 800x1000 Server Rack with perforation, Glass Door, Cable

19 managemenet, 6/16A power strips- 2 nos, Castors, 4 fan for cooling, Rack Nos. 2 80,000.00 1,60,000.00

should have shelves - 4 nos

SITC of router with Aggregate Throughput (Default) 500mbps, Aggregate

Throughput (Performance License) 1gbps, Total onboard WAN or LAN

10/100/1000 ports 4nos, RJ-45-based ports 4nos, SFP-based ports 4nos, NIM

20 slots 3nos, Default memory DDR3 ECC DRAM (data plane) 2gb, Maximum Nos. 1 8,95,093.00 8,95,093.00

memory DDR3 ECC DRAM (control/servic es plane) 16gb, Default flash

memory 8gb, USB console port -type B mini (up to 115.2 kbps) 1nos

SITC of firewall with 22 x GE RJ45 ports (including 2 x WAN ports, 1 x DMZ

port, 1 x Mgmt port, 2 x HA ports, 16 x switch ports with 4 SFP port shared

21 media), 4 SFP ports, 2x 10G SFP+ FortiLinks, dual power supplies Nos. 1 23,06,133.00 23,06,133.00

redundancy., 3 years Enterprise Protection

SITC of L3 Switch with 24X 10/100/1000 Base-T ports and 4x 10G/1G fixed

uplinks interface. Distribution Switch shpuld have minimum 16GB Flash

memory, Advanced switching capabilities BGP, EIGRP, HSRP, IS-IS, BSR,

22 MSDP, PIM SM, PIM SSM, BIDIR-PIM, IP SLA, OSPF. VRF, Software- Nos. 1 4,30,478.00 4,30,478.00

Defined Access (VXLAN, LISP, SGT), MPLS, mVPN 3 years warranty support

for Access Switches.

SITC of Access Switch with minimum of 48x 10/100/1000 Base-T ports, 4x 10

Gig SFP+ ports for uplink ports(supporting Single mode & Multi mode 1G/10G

(LX, LR, SX & SR modules). Should have Non-blocking switch fabric, IPv6

Ready with RPS 3 years warranty support for Access Switches.

SITC of Hardware controller managed 2*2:2 Indoor Wi-Fi 6 (802.11ax) Access

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: IT

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S No Description UNIT QUANTITY RATE

Supply, Installation, Testing & Commissioning of POE+ Access Switch with

minimum of 48 ports full POE+ (12 mGig ports up to 10G, 36 ports up to 1G,

25 4x 10 Gig SFP+ ports for uplink ports(supporting Single mode & Multi mode Nos. 2 7,14,901.00 14,29,802.00

1G/10G (LX, LR, SX & SR modules). Should have Non-blocking switch fabric,

IPv6 Ready with RPS 3 years warranty support for Access Switches.

SITC of Stacking module of minimum 80 Gbps and maximum 160 Gbps with

50cm stacking cable.

SITC of Stacking module of minimum 80 Gbps and maximum 160 Gbps with

3m stacking cable.

28 SITC of 10 Gig SR transceivers/equivalent LC connector MM Nos. 8 2,66,486.00 21,31,888.00

29 SITC of 1 Gig SR transceivers/equivalent LC connector MM Nos. 4 92,245.00 3,68,980.00

30 SITC of 1 Gig SR transceivers/equivalent LC connector SM Nos. 2 94,808.00 1,89,616.00

31 SITC of Wireless Controller Nos. 1 4,38,145.00 4,38,145.00

Total including GST 0 1,93,68,568.00

Digitally signed by MOHD

QUANTIT TOTAL TOTAL

S No Description UNIT RATE

Y AMOUNT AMOUNT

IP BASED CCTV SYSTEM DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof Dome camera

with 2.8 to 10mm Motorized Lens, Smart IR, up to 30M IR distance, Up to 120 dB WDR (Wide

Dynamic Range), 3D DNR (Digital Noise Reduction), H.265, H.264, MJPEG, Corridor mode,

Triple streams, 3-Axis, IP66, IK10 Vandal Resistant, Colour: 0.06Lux (F1.8, AGC ON), 0 Lux

with IR, Video Compression , H.265, H.264, MJPEG, Behavior Detection Intrusion, Crossing

line, Motion detection, Account block, Crowd detection, Object left, Missing object, Intelligent

Identification Face detection, Defocus, Scene Change, onfigurable password strength

1 protection, CSRF protection, Digest authentication, HTTPS, IEEE 802.1x, Secure boot, Nos 10 32904.00 329040.00

Session timeout, Signed firmware, Brute force attack event, Build in cybersecurity, Cyberattack

event, Quarantine event,PoE (IEEE802.3 af) Power consumption: Max 7.2W, Edge Storage

Micro SD Card, Up to 256GB, ANR Support,Working Environment -40°C ~ +50°C, Humidity ≤

98% RH(Non-condensing),Compatible Integration ONVIF (Profile S,G,T), API.UL62368-1,

IEC/EN 62368-1, IEC/EN 60950-22,IEC/EN 62471, BIS,non-Hisilicon SOC, NDAA Compliant

Supply, Installation, Testing and Commissioning of 32 Ch Embedded Network Video Recorder

with 4 Sata Supports 1 × RJ45 1000M, 4K Cameras, HDMI, VGA, RAID, Power Supply,

Smart Analytics and ONVIF, Object Search (People, Vehicle), Scene Search (Line crossing,

2 Intrusion, Loitering), Attribute Search (People: Gender, Age, Clothing Color, Nos 1 236500.00 236500.00

Accessories,Vehicles: Type, Color), built in Cybersecurity in camera, non-Hisilicon SOC, NDAA

Compliant, Built in POE

Supply, installation testing and commissioning of Network Video recorder Linux based to

manage and control all the cameras from control room. Software shall support maximum 16

3 channel with joystick controller. 256Mbps Bit Rate Input Max(up to 32-ch IP video), 2 Nos. 1 97556.00 97556.00

SATA Interfaces, alarm I/O: 16/4, 1.5U case,19" with 2x4TB i.e. 8TB HDD inside

Supply, installation, testing and commissioning of Video Management software enabling

security related personnel to easily and remotely gather video evidence, monitor live situations,

and configure and maintain a video surveillance system over Ethernet consisting of digital video

recorders (DVRs), hybrid digital video recorders, network video recorders (NVRs), analogue

4 video cameras, and IP video cameras should support Detachable Viewers –users have the Nos. 1 160000.00 160000.00

ability to detach Viewer panels and move them to other (or the same) monitor(s). A maximum

of two (2) Viewers can be detached for a total of 75-up video tiles [two (2) detached and one

(1) core Viewer.

Supply Installation Testing & Commissioning of 43 inch Full HD LED monitor including wall

mount brackets/ clamps/ desk mounting stand.

6 Supply and fixing of RJ45 Connector Nos. 20 26.00 520.00

Digitally signed by MOHD

QUANTIT TOTAL TOTAL

S No Description UNIT RATE

Y AMOUNT AMOUNT

IP BASED CCTV SYSTEM DSR (INR) NON-DSR (INR)

Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45 face plate

complete as required.

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C Category-6,

Termination of Catergory-6 UTP Cable, UL listed, Shall conform to Category-6 as per the

EIA/TIA-568C.2, Shall support network line speeds up to 1 Gbps, Shall have RJ-45 type

connector with bend limiting and strain relief boot for securing IDC contacts from external

8 forces and for maintaining the bend radius of the cable, Shall have minimum durability of 750 Nos. 10 240.00 2400.00

mating cycles and 200 termination cycles. Shall be certified by independent labs like

ETL/GHMT for compliance to EIA/TIA-568C.2. The outlet shall be fixed in existing box & cover

plate in wall/furniture/floor complete as required.

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring

9 shuttered front access for preventing ingress of dust, dimension as per commercially Nos. 10 80.00 800.00

available modular office furniture.

Supply & Laying in existing conduits/raceway/furniture of 4-pair Unshielded twisted pair cable

with a cross filler (+), meeting Category 6 standards as per TIA-568C.2. The cable shall be

tested till 600 MHz or more from independent laboratories like ETL for 4 connections. Test

Certificate from independent labs like ETL shall be required.

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP ports for PCB based IO

Jacks (RJ45, TIA-568C Category-6), having integrated bonding bar or other mechanism

for grounding, loaded with individually replaceable 24 nos. Category-6 I/O Jacks

11 complying with TIA-568.C.2. Shall be 6 port module construction for better cable dressing Nos 1 8000.00 8000.00

at the rear. The jacks shall have RJ-45 type connector with bend limiting and strain relief boot

for securing IDC contacts from external forces and for maintaining the bend radius of the cable.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded

twisted pair stranded copper cable with an enhanced performance modular plug at each end.

12 Patch cord cable shall be offered in multiple coloured UTP cable for design flexibility with a Nos. 10 235.00 2350.00

clear strain relief boot on each modular plug. All patch cords shall be compatible with both

T568A and T568B wiring schemes. UTP Cable, 2 Meter.

Supplying & Fixing of Category 6, UTP patch cords constructed of 24 AWG unshielded

twisted pair stranded copper cable with an enhanced performance modular plug at each end.

13 Patch cord cable shall be offered in multiple coloured UTP cable for design flexibility with a Nos. 10 275.00 2750.00

clear strain relief boot on each modular plug. All patch cords shall be compatible with both

T568A and T568B wiring schemes. UTP Cable, 1 Meter.

SITC of Access Switch with minimum of 24 nos. 10/100/1000 PoE Ethernet Ports with 4 SFP

Uplinks and total for 28 Ports , it should support Full Duplex Switching

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Image Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire with

LED(Light Emitting Diode) system power: 28W, 120 LM/W system efficacy,

colour temperature of 4000K, neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI>80,

luminous flux of 3360 lm, MacAdam 3, T.H.D≤10%, driver efficiency ≥ 88%,

1 MR surge protection of 2.5kV, direct light emission, Aluminium body, polyester no 28 5195.00 145460.00

white powder coat applied over a 5-stage pre-treatment, Prismatic diffuser for

glare-free uniform light, UGR<19, Electronic control gear

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

Supply, Installation, Testing and Commissioing of Recessed downlightwith

HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system

power: 12 W, Luminous flux of luminaire 1320 lm, 110 LM/W system efficacy,

Colour temperature of 4000 K, Neutral white, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours; energy-efficient

2 MR LEDs, direct light emission, housing in die-cast aluminium, Polyester powder no 220 1394.00 306680.00

white coloured coat applied over a 5-stage pre-treatment trim, prismatic

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear,

Protection class II, IP 40, Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm

Supply, Installation, Testing and Commissioing of Pendant/Recessed luminaire

with LED (Light Emitting Diode), system power 28 W, luminous flux of

luminaire 3080 lm, 110 LM/W system efficacy, direct light emission CRI>80,

colour temperature of 4000K, Neutral white, 230V constant current driver, 70%

of luminous flux after 50,000 operating hours, energy efficient LEDs, luminaire

profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium

3 MR white coloured coat applied over a 5- stage pre-treatment, high efficiency glare- no 400 4001.00 1600400.00

free snap fit micro-prismatic diffuser for homogeneous light distribution, ZHLS

(Zero Halogen Low Smoke) internal wiring, integral Electronic control gear,

adjustable suspender,

Protection class I, IP 20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max =

Supply, Installation, Testing and Commisioning of Recessed luminaire with

LED (Light Emitting Diode), system power: 28 W, luminous flux of 2800 lm,

colour temperature of 4000 K, Neutral white, 230 V constant current driver,

70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, CRI

4 MR > 80, CRI > 80, THD<5%, P.F>0.95, SDCM 3, direct light emission, Luminaire no 2 2800.00 5600.00

housing in Aluminium Extrution, polyester white powder coat applied over a 5-

stage pre-treatment, Opal diffuser for glare-free uniform light, integral electronic

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Image Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commisioning of Recessed downlight with

LED (Light Emitting Diode) system power: 5W, Luminous flux of luminaire 400

lm, Colour temperature of 4000 K, Warm white, CRI > 80, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-

efficient LED, direct light emission, housing in die-cast aluminium, Polyester

powder white coloured coat applied over a 5-stage pre-treatment ceiling trim,

5 MR with reflector, beam angle of 24°, Electronic control gear, no 50 1200.00 60000.00

Protection class II, IP 20,

Recessed with trim luminaire Pinspot light with LED(Light Emitting Diode) system

power: 8W, luminous flux of luminaire 640lm, colour temperature of 4000K, Neutral

white, CRI>90, 230V constant current driver, 70% of luminous flux after 50,000

operating hours, direct light emission, aluminium housing with trim, polyester White

powder coat applied over a 5 stage pre-treatment on trim, with lens and a beam angle

6 MR of 24° and external electronic control gear, no 30 2400.00 72000.00

Protection class II, IP20

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall

formed out with TRANSLUCENT Printed fabric coverings made out of polyester knitted

fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m,

3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of

fabric is matt, smooth and uniform with blanq color and light transmission of 50%. The

tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire

rating should be accordance to B-S1, d0. The fabric should be humidity resistant and

free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At

labeling in accordance with the French decree no. 2011- 321, Oeko-Tex standard100

certified. Fabric should be installed with approved manufacturer guidelines. It comes

with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed

7 MR fabric should be dry installation & done at room temperature using CLIPSO PVC, ABS Sq Meter 120 12798.00 1535760.00

Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush

finish of tapered and square edges in desired design as per architect

specification.Supply of LED Lights behind the Fabric Wall/ False ceiling in modules/

PCB with recommended wattage as per manufacturer's standards to give an effect of

ambient lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing / Pitch

should be atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud

be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/

PCB should be positioned properly to provide an even light flow, casting noshadows or

dark spots. LED Driver Cost included.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

SITC of UL268 6th and 7th edition compliance and FM approved Intelligent Addressable multi-

criteria detector (optical and thermal sensors) complete with standard base, facility to mount in

different comprehensive environment, Tri-color detector-status LED with 360 ° view,

microprocessor circuitry with error check; detector self-diagnostics and supervision

programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) , Field

1 MR programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI No 210 3175.00 666750.00

immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit

integrity and advanced fault finding. Manufacturers not having in-built Isolator feature in

detector shall consider Isolator base in place of standard base OR separate Isolator before

and after every detector to comply the same without any extra cost. It shall be

includesurface/recessed MS Box complete with all connections etc as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

SITC of UL Listed and FM approved Intelligent Addressable Rate of Rise and Fixed

temperature detector complete with standard base, Seven (7) field-selectable settings in a

temperature range of 135°F – 174°F (57.2°C – 78.9°C) , a low-temperature warning of 40°F

(4.4°C), facility to mount in different comprehensive environment, Tri-color detector-status LED

with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics and

3 MR supervision programs, Field programmable as rate-of-rise or fixed temperature, Polarity No 20 3028.00 60560.00

insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in-built

isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not

having in-built Isolator feature in detector shall consider Isolator base in place of standard

base OR separate Isolator before and after every detector to comply the same without any

Supplying, installation, testing & commissioning of fault isolator complete with base as

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and

75cd flashintg at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Control

Module with built in dual isolator, polarity insensitive, Tri color LED for status (Green for

Normal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-49degC and

6 MR <=95%. Module shall have in-built isolator for better reliability, circuit integrity and advanced No 3 3753.00 11259.00

fault finding. Manufacturers not having in-built Isolator feature shall provide separate

Isolator before and after every Module to comply the same without any extra cost. (For

AHU & Staircase Pressurization Fans, Hooters / Sounders / Strobes etc.)

Supplying, installation, testing & commissioning of addressable phone control module

complete as required.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Monitor

Module with built in dual isolator, polarity insensitive, Tri color LED for status (Green for

Normal,Yellow for Faulty and RED for activation), Operating Temp and RH: 0-49degC and

8 MR <=95%. Module shall have in-built isolator for better reliability, circuit integrity and advanced No 3 2950.00 8850.00

fault finding. Manufacturers not having in-built Isolator feature shall provide separate

Isolator before and after every Module to comply the same without any extra cost. (For

Flow Switch Monitoring/ Gass suppresion Integration etc.)

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

SITC of UL268 6th and 7th edition compliance and FM approved Intelligent Addressable

Duct detector with 10ft sampling pipe (optical and thermal sensors) complete with standard

base, facility to mount in different comprehensive environment, Tri-color detector-status LED

with 360 ° view, microprocessor circuitry with error check; detector self-diagnostics and

supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F (57°C) ,

9 MR Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and No 12 9192.00 110304.00

RFI immunity, RoHS compliant. Detector shall have in-built isolator for better reliability,

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator

feature in detector shall consider Isolator base in place of standard base OR separate

Isolator before and after every detector to comply the same without any extra cost.

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and

75cd flashintg at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Manual

Pull Station Single Action, Shock and Vibration Resistant, with built in dual isolator, polarity

insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED for

11 MR activation), T-45 Key Reset lockset for easy maintenance, Operating Temp and RH: 0-49degC No 21 4301.00 90321.00

and <=95%. MCP shall have in-built isolator for better reliability, circuit integrity and advanced

fault finding. Manufacturers not having in-built Isolator feature shall provide separate

Isolator before and after every MCP to comply the same without any extra cost.

Supplying, installation, testing & commissioning of 8 zone, voice alarm controller with USB,

MP3 player (including 8 zone button paging station) with seamless integration facility with main

12 MR fire alarm panel for voice evacuation. 3. The controller shall comply standards of BS EN54-32 No 1 229838.00 229838.00

& EN608409, Controller shall have AC 230V and DC24V battery input. Auto switch into the

battery backup when AC fails.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

operating at 240 Volt AC Supply complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm FS armoured cable, 600/1000V rated with

15 MR annealed copper conductor having XLPE insulation, steel wire armouring & FS outer sheath Mtr. 1260 235.00 296100.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

existing surface / recessed steel conduit of following pairs, cores and size including

16 MR connections and interconnections etc. as required.

Supplying and Laying of 2x1.5sqmm FS unarmourd cable Mtr 900 158.00 142200.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Digitally signed by MOHD

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, Installing, Testing & Commissioning of LED technology, High efficiency,

Emergency light s with Function Use as an emergency luminaire Testing system Stand

Alone, Housing Polycarbonate, Glow wire test : 850°C, RAL9003, Type of mounting Surface:

Recessed base for ceiling, double sided cone diffuser, plexi plate diffuser, Degree of protection

19 MR IP65, Operation Mode Non Maintained or Maintained & Non Maintained mode selectable, NOS 2 7637.00 15274.00

Connection voltage 230V -/+ 5% [220V-240V] 50-60Hz, Permissible ambient: temperature

+5°C to +40°C, Battery: Ni-Cd, Duration 3 hours, Viewing distance 20m or 30m, Insulation

class II, 20 mtrs. viewing distance, Dimensions in mm: 270x119x49; for 30m viewing distance

version: 371x170x62

SITC of Remote Paging Microphone should be fully digital connected via CAT6 Cable with

Controller. The Microphone should have capability to make announcement in 96 Zones and

have all call facility. The Microphone shall have ability to control music and should be able to

route the music in zones. Microphone should have maximum zones capacity up to 120 Zones.

20 MR The Microphone should have LED indication for the different faults, the unit shall be able to NOS 1 158571.00 158571.00

indicate AC, DC, Fault, Mic and Test status through LED.. The Unit shall have 2 RJ45 ports for

Microphone so that the other microphone shall be able to link with the unit. The Microphone

shall have ability to Communication limit up to 600 Meters

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

BMS Fire integration compatible with existing system

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 160 character liquid

crystal with backlit control compatible with existing system

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 2 Loop Fire

Alarm control panel. Panel shall be running on full digital protocol with 32 bit Microprocessor .

The Panel shall be complete with 6" color touch screen LCD Display. Fire alarm panel should

have minimum capacity of 2500 detectors and devices in any combination and capable of

making upto 50 loops in single panel using additional Loop cards. Each addressable loop

shall be capable of taking 250 addresses per loop configuring either as all detectors or

modules or any mix of both. The panel shall have the Fire Fighter Touch Screen Graphical

Display panel to inform & guide Fire Fighters for carrying out Fire Fighting operations. The

display shall have Hazmat icons indicating the presence of any explosive gas, liquids,

poison,fumes etc. If this feature is not available in fire alarm panel then additional fire fighter

24 MR touch panel along with necessary hardware and software should be provided by the Nos 1 466667.00 466667.00

manufacturers for fire fighters to guide them during emergency without any extra cost. To

expedite system troubleshooting, the system cards shall have ground fault detection and

diagnostic LEDs by card. In the display,simple building floor plan can be loaded in bitmap or

jpeg format, On the map, the user will see an icon indicating the location of the event in the

building in addition to a 'You-Are-Here' symbol to tell the responding person exactly where they

are in the building in relation to the event. The system shall be polarity insensitive. The panel

shall support degrade mode operation and shall have battery backup of 24 hrs in normal

condition and 30 minutes in Alarm condition.

TOTAL FIRE ALARM WORKS 1298469.00 3188914.00

Digitally signed by MOHD

DSR AMOUNT NDSR AMOUNT

S No Description Unit Total Rate

BMS Software shall be Web Based Graphical interface software based on Windows 10 / Latest. The system

should be accessible from anywhere on LAN or WAN or Ethernet without additional licenses or Software.

The Communication protocol with the DDC, 3 Party Systems, etc,shall be Industry Standard open

platform/Software of BACNET over IP/MSTP/ETHERNET/MODBUS/LONWORKS/SNMP/KNX/M-BUS. The

System shall include data points as per the project requirement and shall be scalable by adding additional

controller and data points licenses. The software shall be open system architecture type which facilitates

interoperability with other system over BACNET IP with complete control and monitoring functions. Offered

software shall have built-in feature for EMS, Alarming, reporting, scheduling & trending. The daily reports,

statistics shall be stored in client based server. Software shall work in the WEB environment supporting

1 HTML5 with min 1 concurrent client users license on LAN / WEB. The web interface should not require a Each 1 470356.00 257142.00

plug-in in order to be displayed and must be compatible with all types of latest-generation web browsers

including displaying on tablet, Mobile, etc as per Client requirement. The software shall support system

generated alarms with statistics of alarm types, notification via email and SMS via GSM module. Software

shall be certified and complying to BACnet Advanced Operator Workstation standard ISO 16484-5 protocol

version 1.13 or latest. This is including the required workstation,32"screen and Printer

Supply, Installation, Testing, Commissioning & Handing over

IOT PANEL WITH ADVANCED APPLICATION CONTROLLERS:

Supply of Smart I/O Controller Digital & Analog and Smart I/O Module Digital & Analog the consisting of the

following IOT Panel. Panel Paint shadeInside/outside duly power coated with two of synthetic enamel

siemens grey paint shade with galvanized mounting plate. Sheet of thickness of door shall be 1.6MM CRCA

2 sheet and frameTop/bootom/side Cover shall be 1.8MM with removal gland plates shall be 1.6MM.Degree of 2 65500.00 131000.00

protection should be IP55.Door shall be projected & removal type swing shoul be 100 to 120 degree. Cable

entry shall be from bottom.Panel shall be free standing typeand each panel have 4 nos romovable lifting

hooks at top.cable termination on either side shall be done with pin type lugs along with identification

ferrules.internal wiring shall be run through PVC channel with covers.Tolerance 5mm of panel dimension.

3 SENSORS & FIELD DEVICES

a Duct type temperature sensors for measuring Supply air temperature at the Air Handling Units Nos 2 7950.00 15900.00

b Differential Pressure Transmitter for measuring the Duct Pressure Nos 16 17950.00 287200.00

c CO2 sensor for indicating CO2 level in AHU duct Nos 2 32450.00 64900.00

d Duct type temperature & RH sensors for measuring Return air temperature at the Air Handling Units Nos 2 13450.00 26900.00

e Current Relay for the run status of FANS as required Nos 6 4200.00 25200.00

Supply, Installation, Testing & commissioning of RESET Grade B Certified IAQ Monitor sensor with inbuilt

mono display to show Real time display measure the levels of PM 2.5, PM 10, TVOC, CO2, Temperature,

Humidity,Light level & Noise level on a real time basis. The IAQ Monitor shall be BACnet IP/MSTP enabled

communication protocal . The Monitor should be capable of sending the indoor air quality information on

display Screen/Workstation as per Client's requirement. Devices should be mounted 3...6 feet from the floor

(90 cm to 1.8 m high) and at least 16 feet (5 m) away from operable windows, air filters. The Monitor should

indicate the traffic indicator changes color based on air quality score: Red, yellow, and green. and should

meet the Readme OSS building standards. The sensors will be modular in design and can be separated

from communication modules, making it easier to replace and maintain over the long term.Quoted price

shall be inclusive of all necessary arrangement as required to make the unit proper functional. IAQ Monitor

sensor shall be with BMS Communication through Backnet IP/MSTP & the data rate will be set at every 10

a 2 Core x 1 sqmm FRLS Al-Mylar Screened with drain wire, Cable for control cabling Mtrs. 120 112.00 13440.00

b 4 Core x 1 sqmm FRLS Al-Mylar Screened with drain wire, Cable for control cabling Mtrs. 280 148.00 41440.00

c CAT 6 Cable, Cable for Ligthing control and communication Mtrs. 28000 57.00 1596000.00

d 1.6mm thick 25mm Dia FRLS PVC Conduit Mtrs. 28000 88.00 2464000.00

a 8-Port 1000Base-T + 4-Slot 1000Base-SX/LX Industrial Managed Switch Nos. 1 99500.00 99500.00

Integration of the below mentioned Equipments:

Necessary data exchange hardware / software points units required to integrate the below third party

systems and to convert to open protocol BACnet over I/P and the ACMV vendor to accommodate the

6 software address required for integration. Any additional hardware or intergrater required to complete the

integration for both read- write provisions shall be quoted here.

Refer I/O Summary for total quantities of each component listed below.

a Variable Air Volume

c Energy Meters

d Fire Alarm Control Panel Nos 1 470000.00 470000.00

e Water Leak Detectors

f RODENT REPELLENT SYSTEM

7 Lighting Control

Lighting Controller for LED lighting 8x LED driver output (RJ-45) 2x Power Input (3pos. screw terminal) 1x

Fast Ethernet Uplink (RJ-45, shielded) 2x Digital Input/2x Digital Output (Screw Terminal)

Integrated sensor for light level, motion detection

Estimated based on number of fixtures

c POE+ Modular Network Switch to connect all the lighting controller No. 8 45000.00 360000.00

d Enterprise version lighting controller software for control & consummtion No. 1 395000.00 395000.00

e Contoller Mounting Racks No. 8 12000.00 96000.00

f 2.4 Ghz, 50Gbps wireless router for third party comminication No. 2 8500.00 17000.00

g Tablet Screen No. 2 15000.00 30000.00

h 8 port Patch Panel No. 18 8000.00 144000.00

i 1ft CAT 6/6A Patch cord No. 440 145.00 63800.00

j Vertical Wire Manager No. 8 7500.00 60000.00

k Integration/Commissioing of Lighting with iBMS No. 1 371882.00 371882.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: IPPBX

S NO DESCRIPTION UNIT QUANTITY RATE

Supply, Installation, Testing & Commissioning of Server based Communication

System with Duplicated Servers - working in Active Redundant Mode with Lic, all

the required licenses and Hardware - IP-PBX/IP Telephony Server: The IP

Telephony Solution shall support the following Services - Voice, Video, IM,

Presence and Audio Conference The Solution should be built on IP Server

archoitecture The IP Telephony Solution should support H.323 and SIP The

Solution should support the following Trunks - FXO, E1 PRI and SIP, equipped

1 with 2 PRI's from Day 1. The IP Telephony solution should incorporate all licenses Nos 1 14,94,000.00 14,94,000

for the Phones and Trunks Solution should support 50 IP Extensions and 500

Analog Extensiosn from Day 1 with future scalabilityupto 1000 users. Licenses for

all Phones supplied should be provisioned on Day1 Solution should support Hard

50 IP Phones, 500 Analog Phones Softphones, Video Phones, Rack mount

architecture, complete as required and as per technical specifications.

Supply, Installation,Testing and commisioning of Executive Level SIP Phone with

Color display – 3.7 inches x 2.1 inches (9.5 cm x 5.4 cm)- Diagonal width: 4.3

inches (11 cm), Touch Screen display, 4-position adjustable tilt display,

Permanently-labeled feature buttons:, speaker, mute, headset, contacts, home,

history, message, phone, forwarding, volume (separate volume levels in handset,

speaker, ringer, and headset), Red LEDs on speaker, mute, headset, message

and history, 24 administrative buttons, Wideband speakerphone 0-5 Softkeys,

Ergonomic hearing aid compatible, handset supporting TTD acoustic coupler,

Bluetooth and DECT headset support with adapter, Message waiting indicator,

Ethernet (10/100/1000) line interface, Secondary Ethernet (10/100/1000)line

interface, Optional IEEE PoE 802.3af adapter registers as class 2 device, SIP

protocol, H.323 protocol support, Standards-based codec support: G.711, G.726,

Supply Installation, Testing and Commissioning of Analog Speaker Phone with

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S TOTAL TOTAL

DSR DESCRIPTION UNIT QUANTITY RATE

NO AMOUNT AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of

smart card reader, Supports multiple smart card

technologies - iCLASS Seos, iCLASS SE/SR,

MIFARE DESFire EV 1 and MIFARE Yes Classic

Standard iCLASS Access Control Application

IS014443A (MIFARE, DESFire, NFC) CSN, ISO

14443B CSN, IS015693 CSN, Certifications-

1 MR UL294, FCC; CE, ROHS, Supports on-board Nos 10 11,538.00 1,15,380.00

Wiegand interfaces, Supports operating

environment 0 to 60°C, Card reader should be

compatible with the sector layout of ECIL issued

Yes cards (mifare cards). The proposed reader

OEM should ready for customization if any with

the final card design.

Supply Installation Testing & Commissioning of

Access Control Software Multi Reader and

controller confuguration and upgradable to

Enterprise level with unliimited users. Databse

Supports: MS SQL, Oracle, and MS Access

database types. Type of technology supports:

IRIS Sacnner, Biometric, Face, RFID , etc

2 MR supports template management , Highly secured Nos 1 2,78,571.00 2,78,571.00

communication with server,Allows for real- time

monitoring of system status and user activities

with optional audio alerts. tamper detection,

network communication loss, and many other

system attributes, with the required attendance

Digitally signed by MOHD

SITC of Access IP Master Controller with

Enclosure & Power Supply- 1 door Universal 2

Reader TCP/IP Controller Expandable upto 4

Reader with exit reader module,Access

Controller having a minimum 4 nos Encrypted

OSDP RS485 Wiegand supported Reader ports

with on- board option- a. 8 Inputs & 4 outputs &

for b. 24 Inputs & 16 outputs, Inbuilt RTC battery

3 MR backup; supports power supply options of 12 Nos 5 45,019.00 2,25,095.00

VDC ± 10%, 500 mA /24 VDC or PoE/ PoE+. The

Controller shall have the capability to power up

600 mA maximum for 12V readers & 300 mA for

5V readers through primary power current

supply.Temperature: 0 to 70°C (35 -150°F);

Humidity: 20 to 80% RH (non-condensing) ,

10000 USERS & 10000 transactions,2 Reader.

Supply, Installation, Testing & Commissioning of

12V, 5 Amp. SMPS with MS Box Certified.

Supply and commissioing of MIFARE; DESFIRE;

I Class card formats. Supports 16 card formats

per active reader, 8 per offline reader; entire card

5 MR number reported on invalid read; 19 digit (32/64- Nos 400 275.00 1,10,000.00

bit) User 10 and 15 digit PIN numbers maximum;

PIV, CAC, TWIC card compatible; 255 Access

Levels per cardholder;

Supply Installation Testing and Commissioning of

6 MR double leaf 600 LBS Door Electro Magnetic Lock Nos 3 7,650.00 22,950.00

with complete compatiable Bracket UL Listed.

Supply Installation Testing and Commissioning of

7 MR Single leaf 600 LBS Door Electro Magnetic Lock Nos 7 4,775.00 33,425.00

with complete compatiable Bracket UL Listed.

Supply Installation Testing and Commissioning

8 MR Touchless Request to Exit button with detection Nos 10 912.00 9,120.00

range from 4 to 12 cm.

Supply Installation Testing and Commissioning

9 MR Fire Exit panic Bar single/double Door with EM Nos 10 14,624.00 1,46,240.00

lock and required accessories all included

Digitally signed by MOHD

Supply Installation Testing and Commissioning

10 MR Emergency Door Release Button, Gree, Key Nos 10 659.00 6,590.00

Resettable, Double Pole Double Throw.

Supply Installation Testing and Commissioning of

Cat 6 Network cable.

Supply Installation Testing and Commissioning of

8 Core -conductor20 to 22 AWG.

Supply Installation Testing and Commissioning of

13 MR AC 3 Core Plain Copper conductor, PVC Mtr 100 107.00 10,700.00

Supplying and fixing of following sizes of medium

class PVC conduit along with accessories in

surface/recess including cutting the wall and

14 MR making good the same in case of recessed

conduit as required

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel

paint of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.1 Pendant type 266 Each 522.00 138852.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread

to sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket,

stockbar of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 4 NOS 12912.00 51648.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: A V SYSTEM

S No Item Description Unit Qty Rate DSR Amount Non DSR Amount

SITC of LED display wall area- 15.74x8.85 feet, Pixel Pirch-2.5mm or lower, display

area- 139.42 squre feet or more, SMD 3 in 1 technology, (1Red,1 Green,1Blue),

Resolution 1920 x 1080 or higher, Brightness->800 Nits, Bit Depth- 16 Bit(Internel

processing-18 bit, Contrst ratio- 5000:1, Viewing Angle Horizontal-150 degree, Viewing

Angle Vertial- 150 degree, Frame Rate-60 Hz or above, Refresh rate- 3840 HZ or

higher, LED Lifespan- 100000 Hours, Duty Cycle- 24x7, Operaating Temp- zer to 40

degree plus, IP rating- IP20 front and back, Line Voltage Temp-230 Volts AC @ 50 Hz,

Single Transmission- CAT/ Fiber cable/ Propeitary cable, Power Consumption Max-

1 247(W/㎡) or Less, It should be suitable for wall mount from same OEM for the LED No's 1 58,93,451.00 58,93,451.00

Video wall to be provided. Swap Features from front with auto color calibration.,

Certification require-CE, FCC, UL &BIS.

LED Controller should be from same OEM having control ports-RJ-45,RS-232 & USB,

Video Input Type-HDMI 2.0 (w/ HDCP 2.2) X 2 / Display Port X 1, Resolution-4K, Output-

HDBaseT/ Fiber, signal power cable required, Compliance- HDCP, Ethernet Port-

Minimum 1 Giga Bit Lan, with sinage player, Certification Required- BIS,CE,FCC,UL, etc

SITC of 98" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution,

Brightness 500 Nits, Native Contrast Ratio (Typ.): 1200:1, Viewing angle (horizontal /

vertical): 178 / 178 degree, Display Colours: 1.07 Billion, OS: Tizen, Contrast ratio

2 (typical) 1200:1, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, No's 1 14,11,544.00 14,11,544.00

Audio Out, COntrol: RS232, Ethernet, 2x10W Built-in speakers,Cortex A72 1.7GHz

Quad-Core CPU, 8 GB Inbuilt memory,CE,FCC,UL,BIS,ISO45001Certified etc all

SITC of 85" Professional Ultra HD Interactive Display Panel, 4 drawing (1024 level touch

recognition), Touch Pen Type: Passive Pen with magnet, Object Recognition Range:

2mm/ 4mm / 8mm / 50mm , 1024 Level on Brush Mode, Touch Response Time:

6.7ms or Better, 4K UHD (3840x2160) Resolution, Brightness 500 Nits, Viewing angle

3 (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Contrast ratio No's 2 7,95,900.00 15,91,800.00

(typical) 4000:1, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In,

Audio Out, Control: RS232, OS: Tizen,Processor CA72 Quad(1.7GHz) 2MB L2,

Ethernet, 2x10W Built-in speakers, UL, FCC, CE, ROHS, BIS Certified etc all complete

SITC of 75" Professional Ultra HD Interactive Display Panel, 4 drawing (1024 level touch

recognition), Touch Pen Type: Passive Pen with magnet, Object Recognition Range:

2mm/ 4mm / 8mm / 50mm , 1024 Level on Brush Mode, Touch Response Time:

6.7ms or Better, 4K UHD (3840x2160) Resolution, Brightness 500 Nits, Viewing angle

4 (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Contrast ratio No's 2 4,85,150.00 9,70,300.00

(typical) 4000:1, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In,

Audio Out, Control: RS232, OS: Tizen,Processor CA72 Quad(1.7GHz) 2MB L2,

Ethernet, 2x10W Built-in speakers, UL, FCC, CE, ROHS, BIS Certified etc all complete

SITC of 65" Professional Ultra HD Interactive Display Panel, 4 drawing (1024 level touch

recognition), Touch Pen Type: Passive Pen with magnet, Object Recognition Range:

2mm/ 4mm / 8mm / 50mm , 1024 Level on Brush Mode, Touch Response Time:

6.7ms or Better, 4K UHD (3840x2160) Resolution, Brightness 500 Nits, Viewing angle

5 (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Contrast ratio No's 3 2,85,150.00 8,55,450.00

(typical) 4000:1, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In,

Audio Out, Control: RS232, OS: Tizen,Processor CA72 Quad(1.7GHz) 2MB L2,

Ethernet, 2x10W Built-in speakers, UL, FCC, CE, ROHS, BIS Certified etc all complete

SITC of Fixed Wall Mount, capable of holding up to 125 kg and supports 65" to 110"

displays, VESA Compliant etc all complete

SITC of of Digital Podium one shelf, with Dual Gooseneck Microphone connectivity and

LED Light, Power extension, along with touch screen to view the main screen content

with all required accessories etc all complete. Front digital sinage display as per

requirement and as per direction of client

Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-format cables, 2

8 Universal Power Socket , 1 HDMI, 1 USB-C for Data Transfer, made of aluminium No's 11 29,560.00 3,25,160.00

etc all complete

SITC of Wireless Presentation Platform, allows simultaneous content sharing for up to

four 1080p presenters, Wireless screen casting with iOS, Android, Mac, Chromebook,

and Windows devices through native AirPlay, Google Cast, or Miracast protocols,

9 Supports YouTube Live streaming, Local storage available for playback of images and No's 3 2,67,450.00 8,02,350.00

video, WPA2-PSK, and AES-128 encryption, with two wireless dongel etc all complete

SITC of All in One Conference Unit, Camera Sensor 1/2.5″, CMOS, Effective Pixel:

8.0M, 4 x MEMS mic array, AEC | ANS | AGC 180° Pickup Angle pickup Range: 5-8m

10 (16-26ft) A.I. camera with smart backlighting, auto-framing, speaker & presenter No's 3 3,05,670.00 9,17,010.00

tracking, Inputs / Outputs 1x USB-C Input with Alt-Mode, 1x HDMI Input, 1x HDMI

Output etc all complete

SITC of Network PTZ Conference Camera, 12x optical zoom and 60° horizontal FoV,

1/2.8” low-noise CMOS Sensor, Sensor Scanning Mode: Progressive, Horizontal

Rotation Range: ±170°, Vertical Rotation Range: -30° to +90°, Image rotation for ceiling

11 mounting, White Balance: Auto, indoor, outdoor, one-push, manual, specified color No's 2 6,25,660.00 12,51,320.00

temperature, IP Stream Resolutions: H.264 @ 360p, 270p or 180p, a single network

cable for video, power and control data transport, HDMI 2.0 and 3G-SDI Outputs Power

Over Ethernet (PoE) support etc all complete

SITC of HD Visual Communications System, with point to point IP connectivity along

with soft VC connectivity 4k Codec-Wireless Presentation System, auto track cam with

wall mount, IP Mic, touch pannel, NTSC/PAL; Cables: 1 HDMI 1.8m, 1 CAT 5E LAN

3.6m, 1 CAT 5E SHLD 25ft, Power: India BIS. Maintenance Contract Required.

43 Digitally signed by MOHD

SITC of Universal Switcher with HDMI and USB-C connectivity, 2 HDMI Inputs, 2 USB-C

connectivity (4K Video, Audio, Data, Power charge), 2 HDMI Outputs, 4 USB-A 3.0

Connection (for USB Devices), 2 USB-B 3.0 Connection (for PC hosts), USB host

13 switching, Analog audio de-embedding, Charging via USB-C up to 60w, Supports HDMI No's 3 3,95,670.00 11,87,010.00

4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), DP Alt Mode, HDMI 2.0,

HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP 2.2 support etc all complete etc all

SITC of 8 Inputs and 8 Outputs HDMI 2.0 Compatible Full 4K Matrix Switcher, Supports

HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), HDCP 2.2 and

HDCP 1.4 compliant with cross conversion capabilities, HDMI 2.0, HDMI 1.4 and DVI

14 1.0 compliant, HDR and Low Latency Dolby Vision support, Audio de-embedding, HDCP No's 1 8,32,710.00 8,32,710.00

2.2 and HDCP 1.4 compliant, Advanced EDID Management, Fully non-blocking

switching architecture etc all complete

SITC of HDMI 2.0 Extender (Transmitter) , Supports HDMI 4K signal formats (4K UHD

@60Hz RGB 4:4:4, up to 18 Gbps), Bi-directional PoC remote powering, Extends HDMI

15 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable, HDR and Low Latency No's 5 1,15,367.00 5,76,835.00

Dolby Vision support, Bi-directional RS-232 extension (pass-through),HDCP 2.3

compliant (transparent pass-through) etc all complete

SITC of HDMI 2.0 Extender (Reciever) , Supports HDMI 4K signal formats (4K UHD

@60Hz RGB 4:4:4, up to 18 Gbps), Bi-directional PoC remote powering, Extends HDMI

16 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable, HDR and Low Latency No's 5 1,15,367.00 5,76,835.00

Dolby Vision support, Bi-directional RS-232 extension (pass-through),HDCP 2.3

compliant (transparent pass-through) etc all complete

SITC of The Ceiling mic should be easily mountable on any kind on ceiling with the least

visible intrusion and effect to aesthetics.

The ceiling mic should offer ease of connection for setup and maintenance. It is desired

that the mic supports Ethernet based technologies like PoE and Dante for easy and

efficient audio routing.

1. The Ceiling mic should support highly directional speech pickup from individual

talkers in the room.

2. 1 mic should be able to cover minimum 500 Sq. Feet

2. Upto 3 talkers around the room should be covered simultaneously.

3. Talker coverage should be customisable and switchable as per the seating layout.

4. The microphone should be programmable to enable maximum noise rejection from

17 areas in the room with unwanted noise. (e.g pantry, traffic etc.) No's 8 6,95,670.00 55,65,360.00

The Ceiling mic should be able to efficiently support voice lift & Sound reinforcement to

aid the farthest listener within the room.

The Ceiling Mic should support easy and robust integration with industry leading Video

Conferencing systems, Sound processors and Room Control applications.

The Product should be certified to work with Industry standard Video conferencing

It should seamlessly support speech based talker tracking with third party camera

control solutions.

The solution should include Ceiling Mount bracket and mute controls on the table/wall in

the room. etc all complete

SITC of SITC of Fully Integrated Audio, Video and Control Solution, 128 Networked

Audio Channel, 24 Channels of analog I/O, including 8 configurable Flex channels, 16

AEC Processor, Up to 32 x 32 Dante audio channels (8 x 8 included), USB AV bridging

18 (16 x 16 audio + Camera Support), Full-featured Control engine (with Feature License), No's 1 6,65,750.00 6,65,750.00

Up to 4x VoIP Instances, External USB audio device host etc all complete etc all

SITC of 6” Compact Frameless In Ceiling Speaker, Rated Power Output 30 Watts or

19 better Line Input 100V or 70V SPL(1W/1M) 91dB Max.SPL (Rated W/1M) 102dB No's 28 13,452.00 3,76,656.00

Frequency Response (-10dB), 60-20KHz etc all complete

SITC of Digital Class D Single Channel Amplifier with less heat production & Switching

Power technology 1U rack size. Speaker Output 4-16Ω & 100V, Frequency Response

L/H Cut OFF 20Hz-20KHz (+1/-2dB) / L/H Cut ON 70Hz-10KHz (+1/-3dB), Input

20 Impedance <10KΩ, THD <0.1% (1KHz/-3dBv, 100W), S/N Ratio >80db, Crosstalk No's 3 1,95,670.00 5,87,010.00

>60dB, 1KHz, Max output, Should have 200W power consumtion or less. etc all

SITC of Control System with BIDIRECTIONAL PORTS 8 RS–232 serial on 3–pin

terminal blocks, 8 GPI/O on 2–pin terminal blocks, 1 Ethernet on a RJ–45 connector, 1

mini–USB connector for firmware upgrade INPUTS 1 built–in IR sensor (for learning)

21 OUTPUTS 8 IR out and 8 relays on 2–pin terminal block connectors, INDICATORS, No's 2 2,97,655.00 5,95,310.00

LED indicator for each port and function, PROCESSOR SPEED 1GHz, MEMORY

512MB RAM, 4GB Flash etc all complete

SITC of 16-port Gigabit Ethernet High-Power PoE+ Smart Switch with 2 SFP Ports and

Cloud Management etc all complete

SITC of 10.2" Apple iPad LED-backlit Multi-Touch display with IPS technology with User

Control Interface (UCI) Deployment etc all complete

24 SITC of Wireless Access Point etc all complete No's 3 37,560.00 1,12,680.00

SITC of 2m/6.5ft HDMI 2.0 Cable, 18Gbps 4K60Hz, Dolby Vision & HDR, ARC,CEC,

ALLM, VRR, | CL3 & VW-1 Rated etc all complete

SITC of 5 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

26 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic Range No's 4 5,234.00 20,936.00

(HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all complete

SITC of 10m HDMI 2.0 AOC | 24Gbps | 4K60Hz | Dolby Vision & HDR | ARC, CEC,

ALLM & VRR | ISF Certified | FT4, CL4 etc all complete

SITC of 2m/6.5ft USB-C to C Cable | SuperSpeed USB 20Gbps | 4K60 Alt-Mode | 100w

PD etc all complete

44 Digitally signed by MOHD

SITC of USB-C to C Active Optical Cable | 5Gbps Superspeed | 4K60 Alt-Mode | 60W

PD | Screw-Lock Connector (15m/49ft) etc all complete

SITC of 2 Conductor 16 AWG Speaker Cable, stranded Bare copper conductors, Mete

PVC/Nylon insulation, PVC jacket (as per actual) etc all complete r

SITC of Category 6A Cable, 4 Pair, S/FTP, PVC jacket (as per actual) etc all complete Mete

32 SITC of Various Cables & Connectors etc all complete No's 20 19,550.00 3,91,000.00

SITC of 24U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on Top of

the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are not rack

mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager & Sufficient Rack

hardwares etc all complete

45 Digitally signed by MOHD

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Hand painting directly on wall creating design and creation of Art work concept on given subject.

With initial visit to site, preparation of various designs with different material, providing the

1 MR samples, layout for approval, improvisation in short listed creative’s and making of final layout for sq m 4 14144.00 56576.00

final production by enlargement of drawing as per ratio of actual size, to prepare detailed working

shop drawings (full scale) based on the Concept drawings.

Mixed media mural Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find

suitable as long as it is permanent in nature.

Metal Sculpture permanent in nature

Concept Creation

Creating design and creation of Art work concept on given subject. With initial visit to site,

preparation of various designs with different material, providing the samples, layout for approval,

improvisation in short listed creative’s and making of final layout for final production by

enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full

scale) based on the Concept drawings/ Views/ site conditions, display of actual size dummy/

mock up Fabricated in sun board with digital print for client approval

Artwork Execution

Execution of approved design in SS 316 grade steel /SS 304 grade SS (1.5mm-2mm thick)/

STONE/ ALLUMINUM/ MIXED MEDIA METAL pu colored (IF REQUIRED) antique as per

approved finish (MRF/ Akzonobel) and protected against discoloration by sealing it with top coat

of MRF/ Akzo nobel clear Pu. Proper support system will be given as per approved shop drawing,

to withstand high wind pressure. The sculpture will be free from any Undulation /Dent unless it is

part of the design. The cost is inclusive of transport/packing and installation of the same at site.

Fastener/screws Hilti or equivalent company.

Providing and fixing theme artwork/ any other as per direction and site requirement from the local

4 MR artisans as per the selection of the client and the architect.

Panels of various sizes No. 20 5334.00 106680.00

Providing and fixing CANVAS painting of different sizes as per the selection and approval of

TOTAL ART WORKS 0.00 1572956.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: FURNITURE

S.NO DESCRIPTION OF ITEM IMAGE/ DRAWING QTY UNIT RATE AMOUNT

TABLE FOR PRESIDENT ROOM

MODEL:- SLATE DESK GLASS

Main Table of size 2400x1000mmx760mm and side Handness Return of 1200x450X750mm ht and mobile pedestal 400WX450DX68HT. whose top and legs are

made of 25mm. thick Particle Board (E-1 Grade), 4mm veneer finishes with matched 2 mm PVC edge-banding.E1 grade 4mm veneer with zero urea formaldehyde

emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).It has Netbox axial comfort 4

gang (UNIVERSAL Version).The Modesty is Particle board wood in 4mm veneer Grade E-1 (Environmental Friendly) thicness 25 mm. ,cover with Melamine Edge-

1 Banding(PVC) 2 mm..The return desk and extension unit top is made of 25mm. thick Particle Board ( E-1 Grade), 4mm veneer finishes with matched 2 mm. 4mm 1 NOS 8,71,206.00 8,71,206.00

veneer edge-banding.Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 25 mm. ,cover with 4mm veneer.Table will have

glass top and half vinyl padding.Table sould have Green Guard certificate nad BIFMA certified.

TABLE FOR VP ROOM

MODEL:- SLATE DESK VINYL

Main Table of size 2100x1000mmx750mm and side Handness Return of 1200x450X750mm ht and mobile pedestal 400WX450DX68HT. whose top and legs are

made of 25mm. thick Particle Board (E-1 Grade), 4mm veneer finishes with matched 2 mm PVC edge-banding.E1 grade 4mm veneer with zero urea formaldehyde

emissions (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. This should comply with (EN 120-1992).It has Netbox axial comfort 4

gang (UNIVERSAL Version).The Modesty is Particle board wood in 4mm veneer Grade E-1 (Environmental Friendly) thicness 25 mm. ,cover with Melamine Edge-

Banding(PVC) 2 mm..The return desk and extension unit top is made of 25mm. thick Particle Board ( E-1 Grade), 4mm veneer finishes with matched 2 mm. 4mm

veneer edge-banding.Also legs are made of Particle board wood Grade E-1 (Environmental Friendly) thicness 25 mm. ,cover with 4mm veneer.Table sould have

Green Guard certificate nad BIFMA certified.

TABLE FOR REGISTRAR/DEPUTY SECRETARY/ASSISTANT SECRETARY

Main Table: 1800(W)X 750(D)x750(H)

Side Storage Table: 900(W)X450(D)X750(H)

Back Storage - 1800W X 450D X 750HT

The worktop to be 25mm thick prelaminated particle board with the ABS edge banding of 1.5mm thickness Metal Understructure All OPTIMIS legs are

made of 2.5 mm thick sheet metal, cut and folded into the form. All fixed height legs come with adjustable glides that allow levelling adjustment from 725 to 750

mm (from floor to desk top).All OPTIMIS main beams are made of cold-rolled rectangular tube 30mm x 40mm, with 2mm wall thickness. Each workstation only

needs one beam for supporting. The mono-beam sub-assembly sits on two legs and form an infrastructure to support worksurfaces and above desk elements. The

3 mono-beam sub-assembly is universal, and adapt to all types of legs in the family.Cable Tray is made of 1.2mm SPCC sheet metal. It needs to be specified for 3 NOS 4,09,031.00 12,27,093.00

Single Side & Back to Back configurations.Wooden Case is available every wood case has two compartments in opposite direction. It is used in back to back

application. The surface is available in either Melamine or High pressured laminate finishing. It is sold in 1 piece per pack.Mini Double Flipper is specified for

Meeting tables and Executive Desk. It can be specified in two different colours: one for outer rim and the other for double flipper. It is mounted with the worksurface

directly.The OPTIMIS meets or exceeds all ANSI/BIFMA (American National Standards Institute and Business and Institutional Furniture Manufacturer’s

Association) performance requirements per ANSI/BIFMA X5.5-2008 Desk/Table Products and ANSI/BIFMA X5.6 Panel Systems -2010.

TABLE FOR ACCOUNTS MANAGER / OSD WITH BACK STORAGE 2400W X 450D X 750HT

TABLE- W 1800 x D 900 x H 750mm SIDE TABLE- W 1200 x D 450 x H 750mm

MODEL:- IMAGINE

Main Table of size 1800x 900mmx750mm and side storage 1200WX450DX750HT whose top and legs are made of 25mm. thick Particle Board (E-1 Grade),

finished with matched 2 mm PVC edge-banding.E1 grade (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality.All imagine legs should

made of 2.5 mm thick sheet metal, cut and folded into the form.Cable Tray should made of 1.2mm SPCC sheet metal.Beam connector should made of glass fibre

4 filled polyamide 66. It is specified with beams to be used with 600mm deep.Table sould have Green Guard certificate nad BIFMA certified. 5 NOS 3,43,691.00 17,18,455.00

TABLE FOR POLICY HEAD / ADMINISTRATION HEAD

TABLE- W 1500 x D 750 x H 750mm SIDE TABLE- W 900 x D 450 x H 750mm

BACK STORAGE - 1500W X 450D X 750HT

MODEL:- IMAGINE

Main Table of size 1800x 900mmx750mm and side storage 1200WX450DX750HT whose top and legs are made of 25mm. thick Particle Board (E-1 Grade),

finished with matched 2 mm PVC edge-banding.E1 grade (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality.All imagine legs should

5 made of 2.5 mm thick sheet metal, cut and folded into the form.Cable Tray should made of 1.2mm SPCC sheet metal.Beam connector should made of glass fibre 12 NOS 2,93,052.00 35,16,624.00

filled polyamide 66. It is specified with beams to be used with 600mm deep.Table sould have Green Guard certificate nad BIFMA certified.

LINEAR WORKSTATION

MODEL:- IMAGINE

SIZE- 1200W X 600D X 750HT AND 450HT SCREEN

WITH CK-8 MOBILE PEDESTAL

:Worktop Made of 25mm thick E-1 grade particle board finished with 2mm ABS edge banding. E1 grade 1mm laminate with zero urea formaldehyde emissions

6 (<or= 8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop should be 201 NOS 74,597.00 1,49,93,997.00

secured with 1.2mm-1.5mm thick PVC edge banding tape of approved colour.The exposed edge of worktop should be secured with 1.2mm-1.5mm thick PVC

edge banding tape of approved colour.thick which should accommodate the glass of thickness 4-6 mm. Workstation sould have Green Guard certificate and BIFMA

Reception table

Size:-2400W x 750D x 1050/750Hmm

Specification :-

Reception desk Top & Legs are made up of 25mm thick E1 grade laminate with zero urea formaldehyde emissions (<or= 8mg/100 g oven dry board-perforated

method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be secured with 2mm thick PVC edge banding

tape of approved colour. The top shall be made of 38mm thick pre laminated particle board with PVC edges. Front hanging panel is madeout of 18mm

thick Decorative E1 Gedae board . The product should be from approved make, Complete as per specification mentioned above & image under the guidance and

7 aprroval of project architect/consultant & engineer in charge. Drawer Unit : 3 drawer Melamine(1D+1D+1F ) pedestal of overall dimensions internal and external 1 NOS 1,84,913.00 1,84,913.00

dimensions 420 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of E1 grade 1 grade laminate with zero urea formaldehyde emissions (<or=

8mg/100 g oven dry board-perforated method) for better in-house air quality. This should comply with (EN 120-1992). The exposed edge of worktop shall be

secured with 2mm thick PVC edge banding tape of approved colour.

HIGH BACK CHAIR FOR PRESIDENT ROOM

CN122AWAAG1G1BBPC4

The seat frame shall be a glass filled Nylon 6 structure which bends on a steel hinge. The seat depth extension shall be a steel frame sliding on an acetal track. The

seat frame shall be connected to an aluminum rack which serves as the structural tie-in to the tilt mechanism and lower arm stem. The Pixelated Support shall

consist of three layers: a layer of tensioned Arnitel® bands, a layer of acetal coil springs and a top mat layer that shall consist of a set of interconnected Sarlink®

pads allowing movement of heat away from the body.The seat textile cover shall consist of a 3D knit fabric top layer of breathable, 100% virgin polyester bonded to

an underlying 100% polyester knit spacer construction. The perimeter shall be RF welded for durability, ease of assembly, and replacement. The fabric shall wrap

around nylon interlocking strips which are anchored to the mat.The Pixelated Support back shall be a flexible Sarlink mat attached to a flexible acetal H-flexor back

structure. The back mounts to a primary structural spine made from glass-filled Nylon 6 and an upper portion antler, also made of glass-filled Nylon 6. The flexible

backrest shall support and distribute the user’s weight over the entire back of the chair and shall return to its original shape when the chair is unoccupied. The back

and support spine shall be secured together with screws.The Embody work chair shall be available with no arms or adjustable arms. Each armrest shall have an

armpad support and an upper arm stem of glass-filled Nylon 6. An armpad support shall attach to the arm stem with two screws. The arm stem shall adjust

vertically in a structural lower arm stem made of glass-filled Nylon 6. The lower arm stem shall adjust through a detenting width adjust mechanism which locks

under vertical load. Two bolts through the rack and seat frame shall attach the lower arm stem to the arm mechanism. See “Adjustments” for adjustable-arm

ranges.Chairs shall have 10.4"-by-4.5" armpads of self-skinning urethane foam molded in place to a glass-filled nylon insert. Armpads shall be flexible with a lightly

8 textured surface.The Embody tilt mechanism shall be 2 fiberglass leaf springs, a gear-driven tension adjustment, and stamped-steel housing. A 2-piece ABS cover 1 NOS 2,28,692.00 2,28,692.00

shall enclose the tilt mechanism. The tilt limiter lever shall be a steel shaft with glass-filled nylon overmold.The 5-star base shall be die-cast aluminum, with a

textured or smooth-coat powder-coat epoxy finish, or polished aluminum. The chair shall swivel 360°. Chairs shall be furnished with interchangeable casters. See

the “Casters and Glides” section for more information. The chair base shall house a unitized pneumatic cylinder seat height adjustment mechanism contained in 2

steel tubes. The inner tube shall slide and rotate in a bushing within an outer tube. The outer tube shall be coated black and shall have a tapered end that shall be

pressed into the base, and an upper end that shall be pressed into the tilt mechanism.Adjustable Arms The arms shall adjust for height by pressing a button on the

underside of the armpad to raise or lower. Arm height adjustment range shall be approximately 4.7". The arm height can be adjusted very low to avoid contact with

a work surface. Arms shall adjust to four incremental width locations when the user applies horizontal force. The arms shall lock when the user applies weight when

entering or exiting the chair.Embody work chairs meet or exceed all American National Standards Institute/Business and Institutional Furniture Manufacturer’s

Association ANSI/ BIFMA Level 3, LEED and Green Guard Certified.

12 Years Warranty

47 Digitally signed by MOHD

VISITOR CHAIR FOR PRESIDENT ROOM

MODEL:-AERON VA

The seat should be high quality mesh.

The back sub-assembly should consist two layers: backframe, and mesh. The backframe should be polyamide 6 + 30% glass fiber. Glass-reinforced nylon results

in materials possessing better tensile and flexural strengths than the base resin. The lumbar support should be made of polyamide 6. The lumbar is embraced

within two pairs of the slider shape brackets that are bolted with the back frame.The chair should have a powdercoated sledge base. Dimensions of the chair

should be 538 (D) x 500mm (W) x 920mm (H). The Chair should be Green Guard and BIFMA Certified.

HIGH BACK CHAIR FOR VP ROOM

The separate seat and back shall be a durable, breathable Pellicle material stretched within a carrier ring and fitted into an outer frame. The Pellicle material shall

be a woven blend of colored polyester yarn with Hytrel elastomeric polyester of various stiffness, which is a high- performance polymer.Right and left swing arms

shall attach the seat and back to the tilt mechanism, support the arms, and provide an attachment location for the height control. The swing arms shall be die-cast

aluminum with either a polished, smooth or wrinkle-coat powder-coat epoxy finish. The swing arms shall attach with 2 screws to each side of the back frame and

with ball joints to the seat.The lumbar pad shall be a nylon bow with integral attachment clip features on each side. A flexible Hytrel strap shall be stretched across

the width of the lumbar bow, connecting with a hook and loop. A 5 ½” high x 4 ¼” wide support pad made of nylon snaps to the center of the strap with 4

snaps.The fixed and height adjustable arms shall have a glass filled nylon arm support and is attached to the yoke with two carbon steel screws. The height

adjustable arm with pivot shall have a glass filled nylon arm support. An acteal detent insert snap fits into the pivot only support and is attached to the yoke with a

stainless steel pivot spring and two carbon steel screws. The fully adjustable arm has a carbon steel support plate that slides between an acetal detent plate and

acetal pivot block.The tilt mechanism shall contain 2 fiberglass leaf springs, a nylon gear-driven tension adjustment and a die-cast aluminum front and rear housing

10 with either a polished, smooth or wrinkle-coat powder-coat epoxy finish. A 3-piece ABS cover shall snap together to enclose the mechanism.The chair base shall 1 NOS 1,80,666.00 1,80,666.00

house a unitized pneumatic seat height adjustment mechanism contained in 2 steel tubes; an inner tube shall slide and rotate in an acetal bushing within an outer

tube. The outer tube shall be coated black and shall have a tapered end that will be pressed into the base and an upper end that shall be pressed into the tilt

mechanism.Seat height shall be controlled by a glass-filled nylon lever and paddle mounted on the right swing arm.The fully adjustable arms support to pivot to 9

different positions and slide fore-aft to 10 positions. The arm shall be adjustable to 16° outward and 16° inward by applying pressure to the side of the arm. The arm

shall slide fore-aft 2.5”

VISIOTR CHAIR FOR VP ROOM

The chair’s distinctive Y–Tower™ structure provides the connection points for the suspension back. It is the foundation of the chair’s distinctive arc, which mirrors

the curvature of the spine.Available with fixed arms or armless.

HIGH BACK CHAIR FOR REGISTRAR/ DEPUTY SECRETARY/ ASSISTANT SECRETARY

The upholstered back option offers an array of textiles with a polymer outer back shell. Interweave 2 is a high-performing suspension material that delivers increased

comfort, breathability, built-in sacral support, and total spinal support. The TriFlex™ polymer back is 100% engineered polymer that offers flexible and continuous

support including built-in sacral support and meets rigorous cleaning protocols. Interweave 2 suspension back and TriFlex polymer back chairs come standard with

passive sacral support and are available with optional adjustable lumbar support with sacral support.The chair has a 5-star base and 2 pneumatic height adjustment

The back frame/outer shell, arms, arm pads and base finishes are black

or mineral.The synchronous with tilt limiter and seat angle allows the user to set

12 tilt range and select a 5° forward seat angle. 3 NOS 71,766.00 2,15,298.00

VISITOR CHAIR FOR REGISTRAR/ DEPUTY SECRETARY/ ASSISTANT SECRETARY

MODEL:-EXPRESS VA

The upholstered contoured seat should be molded polypropylene insert with molded polyurethane foam. The foam should have a nominal 50mm thickness and

have waterfall edges. Fabric is applied non-bonded. The foam firmness is 45+/-5 degree (LX-F sclerometer), and its density is 55-60kg/m3;

The back sub-assembly should consist two layers: backframe, and mesh. The backframe should be polyamide 6 + 30% glass fiber. Glass-reinforced nylon results

in materials possessing better tensile and flexural strengths than the base resin. The lumbar support should be made of polyamide 6. The lumbar is embraced

within two pairs of the slider shape brackets that are bolted with the back frame.The chair should have a powdercoated sledge base. Dimensions of the chair

should be 538(D) X 500mm (W) X 920mm (H). The Chair should be Green Guard and BIFMA Certified.

HIGH BACK CHAIR FOR ACC MANAGER / OSD

The 2 back support frames shall be injection-molded glass-reinforced polypropylene, reinforced with a stamped steel weldment. The back shall be secured to the

frames in 2 locations by injection-molded acrylonitrile butadiene styrene (ABS) fastening caps and in 2 locations by bolts; and the frames shall be attached to the

back of the tilt with 4 bolts.The optional upholstered cushion seat shall have a seat cushion of injection-molded, mediumdensity, cold-cured polyurethane foam over

a polypropylene inner shell. The foam shall have a nominal thickness of 1 ¾” in the back of the seat pan area to provide greater support in the user’s ischial

tuberosities area. The seat shall have waterfall edges. The foamed shell shall be fully upholstered and the fabric shall not be bonded to the foam.Chairs shall be

available with no arms, fixed arms, and adjustable arms. Each arm shall have a steel armstrap, an injection-molded glass-reinforced nylon armpad support and arm

stem, and an armpad of self-skinning urethane foam molded over an ABS insert. Each armpad shall be attached to an armpad support, each armpad support shall

be attached to the armstrap, and the armstrap shall be bolted to the chair’s tilt.The pneumatic seat-height-adjustment mechanism shall be housed within a steel

tube. The tube shall slide and rotate in a bushing within the steel base weldment. The top end of the tube shall be pressed into the tilt mechanism and the lower

end shall be inserted into the 5-star base. The chair shall be available with 2 1/2” diameter casters . Casters for use on carpet only shall have a steel stem and

black nylon wheels and yoke.Each arm shall have a steel armstrap, an injection-molded glass-reinforced nylon armpad support and arm stem, and an armpad of

self-skinning urethane foam molded over an ABS insert.Chair is ANSI/BIFMA and Green Guard Certified.Celle is backed by 12-year, 3-shift warranty

VISITOR CHAIR FOR ROOM-1,2,3,4

MODEL:-EXPRESS VA

The upholstered contoured seat should be molded polypropylene insert with molded polyurethane foam. The foam should have a nominal 50mm thickness and

have waterfall edges. Fabric is applied non-bonded. The foam firmness is 45+/-5 degree (LX-F sclerometer), and its density is 55-60kg/m3;

The back sub-assembly should consist two layers: backframe, and mesh. The backframe should be polyamide 6 + 30% glass fiber. Glass-reinforced nylon results

in materials possessing better tensile and flexural strengths than the base resin. The lumbar support should be made of polyamide 6. The lumbar is embraced

within two pairs of the slider shape brackets that are bolted with the back frame.The chair should have a powdercoated sledge base. Dimensions of the chair

should be 538(D) X 500mm (W) X 920mm (H). The Chair should be Green Guard and BIFMA Certified.

48 Digitally signed by MOHD

HIGH BACK CHAIR FOR POLICY HEAD / ADMIINISTRATION HEAD ROOM

MODEL:- EXPRESS MB

BIFMA X5.1-2017 American National Standards Institute/Business and Institutional Furniture Manufacturer’s Association (ANSI/BIFMA) Office chair QB/T 2280-

2016 The light industry standard of PRC.The upholstered contoured seat shall be molded polypropylene insert with molded polyurethane foam. The foam shall have

a nominal 50mm thickness and have waterfall edges. Fabric is applied non-bonded. When chairs are refurbished, the complete seat assembly can be replaced.

The foam firmness is 45+/-5 degree (LX-F sclerometer), and its density is 55-60kg/m3.The back sub-assembly shall consist two layers: backframe, mesh(or

upholstery). The backframe shall be polyamide 6 + 30% glass fiber. Glass-reinforced nylon results in materials possessing better tensile and flexural strengths than

the base resin. It was regarded to be almost a replacement for some die casting alloys.The Express 2.0™ Chairs shall be available with no arms or adjustable

arms. The adjustable arms can be adjusted in width and in height. The inside width is adjusted through the quick release button on the horizontal lever. The arm

pad can be rotated by 30 degree.

The arms shall have an arm support stem of glass-filled polyamide 6 with over moulded polyurethane arm pads.

VISITOR CHAIR FOR POLICY HEAD / ADMINISTRATION HEAD ROOM

MODEL:-EXPRESS VA

The upholstered contoured seat should be molded polypropylene insert with molded polyurethane foam. The foam should have a nominal 50mm thickness and

have waterfall edges. Fabric is applied non-bonded. The foam firmness is 45+/-5 degree (LX-F sclerometer), and its density is 55-60kg/m3;

The back sub-assembly should consist two layers: backframe, and mesh. The backframe should be polyamide 6 + 30% glass fiber. Glass-reinforced nylon results

in materials possessing better tensile and flexural strengths than the base resin. The lumbar support should be made of polyamide 6. The lumbar is embraced

within two pairs of the slider shape brackets that are bolted with the back frame.The chair should have a powdercoated sledge base. Dimensions of the chair

should be 538(D) X 500mm (W) X 920mm (H). The Chair should be Green Guard and BIFMA Certified.

MID CHAIR FOR WORKSTATION/RECEPTION

MODEL:- EXPRESS 2

BIFMA X5.1-2017 American National Standards Institute/Business and Institutional Furniture Manufacturer’s Association (ANSI/BIFMA) Office chair QB/T 2280-

2016 The light industry standard of PRC.The upholstered contoured seat shall be molded polypropylene insert with molded polyurethane foam. The foam shall have

a nominal 50mm thickness and have waterfall edges. Fabric is applied nonbonded. When chairs are refurbished, the complete seat assembly can be replaced. The

foam firmness is 45+/-5 degree (LX-F sclerometer), and its density is 55-60kg/m3.The back sub-assembly shall consist two layers: backframe, mesh(or upholstery).

The backframe shall be polyamide 6 + 30% glass fiber. Glass-reinforced nylon results in materials possessing better tensile and flexural strengths than the base

resin. It was regarded to be almost a replacement for some die casting alloys. The adjustable arms can be adjusted in width and in height. The inside width is

adjusted through the quick release button on the horizontal lever. The arms shall have an arm support stem of glass-filled polyamide 6 with over moulded

polyurethane arm pads.Chair should have Green Guard certificate nad BIFMA certified.

CHAIR FOR CONFERENCE ROOM

MULTIPURPOSE ROOM CHAIR Stacking Chair, Molded Seat & Fixed Arms with writting desk.Stacking Chairs are lightweight—the armless version with molded

seat weighs just 9.5 pounds—and portable, so they can go wherever you need casual, short-term seating With Green Guard certification. Approved Make: Herman

Miller, Haworth, Ikea,Charmi

CAFETERIA TABLE

SIZE - 1800W X 750D X 750HT

The worktop to be 25mm thick prelaminated particle board with the ABS edge banding of 1.5mm thickness

Metal Understructure

Understructure - Steel 50X50MM with leveling composes of leg, base, glide, accent plate and end bracket. Steel 50X50MM with leveling applies

epoxy finished. Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of

20 steel tube with thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of 12 NOS 42,362.00 5,08,344.00

plastic injection with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with

epoxy finished. Base, glide, accent plate and end bracket deliver together with Steel A-leg.Table sould have Green Guard certificate and BIFMA certified.

CAFETERIA TABLE

SIZE - 1800W X 600D X 750HT

The worktop to be 25mm thick prelaminated particle board with the ABS edge banding of 1.5mm thickness

Metal Understructure

Understructure - Steel 50X50MM with leveling composes of leg, base, glide, accent plate and end bracket. Steel 50X50MM with leveling applies

epoxy finished. Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of

21 steel tube with thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of 13 NOS 35,393.00 4,60,109.00

plastic injection with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with

epoxy finished. Base, glide, accent plate and end bracket deliver together with Steel A-leg.Table sould have Green Guard certificate and BIFMA certified.

Comfortable, low-cost, highly stackable,Lightweight, generously sized, flexible, and supportive.One hundred percent recyclable. The seat and back are high and

wide so the chair fits a large range of people. The back is curved and flexible, to provide lumbar support and flex subtly as you move in the seat. An opening

between the back and seat provides ventilation—and makes the chair easy to carry.

SOFA FOR PRESIDENT ROOM

MODEL:- BARCELONA 3SEATER

3 seater Sofa - The seat is made up of PU foam in density 28+/-2KG/cu meter with an additional top layer of super soft PU foam of density 32+/-2 kg/cu meter,

upholstered with fabric or leaterette. The back is made up of PU foam in density 28+/-2KG/cu meter with two additional top layer of super soft PU foam of density

32+/-2 kg/cu meter, upholstered leather. Understructure is made up of 1.2+/-cm thick hot presses plywood moisture resistant and termite proof as per IS:303 and

pinewood of cross sections devoid of major knots and surfacte defects. 6Nos per seat and 3.8mm dia zig zag spring assembly is mounted over understructure for

23 cushioning purpose. Leg assembly is a welded assembly made is stainless steel grade SS302 tube and plate with plastic end cap. Size :- 1940mmW 4 NOS 2,45,778.00 9,83,112.00

X830mmDX720mm HT.

49 Digitally signed by MOHD

SOFA FOR REGISTRAR/DEPUTY SEC/ASSISTANT SEC / RECEPTION/WAITING

sofa-Width: 1895 mm Depth:800 mm Height: 735mm cm Seat Foam: The Seat is made of PU Foam with Density 32+/- 2 kg/cu .mtr having an additional top layer

of PU Foam with Density 28+/- 2 kg/cu.mtr, Seat is upholstered wuth

Leatherite.Back Foam: The Back is made of leather with Density 28 +/- 2 kg/cu .mtr having an additional top layer of PU Foam with Density 23+/- 2 kg/cu.mtr,

24 Backis upholstered with Leatherite. understructure: unterstructure is made up of 1.2+/- 0.1cm thick hote pressed plywood , 4mm Dia zigzag Spring is mounted in 20 NOS 2,06,476.00 41,29,520.00

the understructure for support and additional cushioning purpose. Leg Assembly: is welded assembly made in SS 202 Grade tube and plate.

SOFA FOR ASSISTANT SEC / RECEPTION/WAITING

sofa-Width: 910 mm Depth:800 mm Height: 735mm cm Seat Foam: The Seat is made of leather with Density 32+/- 2 kg/cu .mtr having an additional top layer of

PU Foam with Density 28+/- 2 kg/cu.mtr, Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 28 +/- 2 kg/cu .mtr having

an additional top layer of PU Foam with Density 23+/- 2 kg/cu.mtr, Backis upholstered with Leatherite. understructure: unterstructure is made up of 1.2+/- 0.1cm

thick hote pressed plywood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Leg Assembly: is welded

assembly made in SS 202 Grade tube and plate. NOS 1,19,791.00 10,78,119.00

SOFA FOR DRIVER REST ROOM

3 seater Sofa - The seat is made up of PU foam in density 28+/-2KG/cu meter with an additional top layer of super soft PU foam of density 32+/-2 kg/cu meter,

upholstered with fabric or leaterette. The back is made up of PU foam in density 28+/-2KG/cu meter with two additional top layer of super soft PU foam of density

32+/-2 kg/cu meter, upholstered leatherette. Understructure is made up of 1.2+/-cm thick hot presses plywood moisture resistant and termite proof as per IS:303

and pinewood of cross sections devoid of major knots and surfacte defects. 6Nos per seat and 3.8mm dia zig zag spring assembly is mounted over understructure

for cushioning purpose. Leg assembly is a welded assembly made is stainless steel grade SS302 tube and plate with plastic end cap. Size :- 1900mmW

26 X780mmDX725mm HT.Sofa sould have Green Guard certificate and BIFMA certified. 2 NOS 2,06,476.00 4,12,952.00

CENTRE TABLE FOR PRESIDENT ROOM

The collection deftly blends fine materials like wood, metal, and leather and fabric upholstery to create a timeless collection

27 of seating and table offerings. 1 NOS 74,597.00 74,597.00

SIDE TABLE FOR PRESIDENT ROOM

Size: 550(W) x 550(D) x 480(H)

The collection deftly blends fine materials like wood, metal, and leather and fabric upholstery to create a timeless collection of seating and table offerings.

CENTRE TABLE FOR VP ROOM/ REGISTRAR/DEPUTY SECREATARY/ ASSISTANT SECRETARY/ PRE FUNCTION

This high molded plywood table has natural face veneers and hardwood inner plies. It has a 5-ply, 34"‑diameter top and an 8-ply 4-leg base. Shipped knocked

SIDE TABLE FOR VP ROOM/ REGISTRAR/DEPUTY SECREATARY/ ASSISTANT SECRETARY/ PRE FUNCTION

Size: 600(W) x 600(D) x 505(H)

This high molded plywood table has natural face veneers and hardwood inner plies. It has a 5-ply, 34"‑diameter top and an 8-ply 4-leg base. Shipped knocked

CENTRE TABLE FOR RECEPTION/ WAITING

MODEL: SL8 CENTER TABLE

Center Table made with 22mm steel frame duly chromeplated with 8 mm glass top.

CENTRE TABLE FOR RECEPTION/WAITING

MODEL: SL8 CENTER TABLE

Size: 450(W) x 450(D) x 600(H)

Center Table made with 22mm steel frame duly chromeplated with 8 mm glass top.

MECHANICAL COMPACTORS

DIMENSIONS BAY:-450/900W x 900D x 2100HT

Compactor Height from ground is 2100 mm (1985 body + 75 mm undercarriage + 40 mm channel system). Width of each bay will be 900 mm Depth of each bay

will be 450 mm for Single & 900 mm for double Bay.Complete construction of system is on knock down design for easy handling of material on site Rigid Upright

frame made out of 1.2 mm thick CRCA Steel box Pipe. Upright with 25 mm x 50 mm rectangular slotted Pipe. Each block consists of 1 Main unit & then Add-on

units (0, 1,2,3,4,5 - depending on no. of bays 1, 2, 3, 4, 5 & 6). Body units are bolted to undercarriage. Scalability Bays can be added Depth wise or width wise

subsequently, if the need for additional filing is there.All metal component are given antirust surface treatment & are powder coated with epoxy polyester powder. It

involves 8 Tank treatment consisting of Degreasing, water rinse, phosphating & dry off oven treatment. Final finish consists of epoxy polyester powder coating with

a Dry Film Thickness of minimum 60 microns. The testing of paint is done for various physical & chemical properties as per IS: 101.

The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C.Grey, Beige, White, Brown, Black & Graphite, Single color or two tone

combinations.Number of shelves Each unit has 6 loading levels formed by 4 nos. adjustable shelves. 438 mm depth is available for storage of box file as well any

odd size folders.

Shelf thickness - 0.8 mmCRCA thickness with 40 kg UDL ( Uniformally Distributed Load)

Shelf Optional - 0.8 mm CRCA with stiffner with 80 kg UDL ( Uniformally Distributed Load) Shelves are mounted on support brackets & shelf level can be adjusted

at 25 mm pitch.

33 Upright Rigid construction made out of 1.2 thk. CRCA Steel upright with 25 mm x 50 mm rectangular Pipe. 51 BODY 49,005.00 24,99,255.00

Clading 0.7 mm CRCA sheet metal panels .

Optional Doors- Optional doors with lock on each bay can be provided.

Trolley material - Steel pipe 1.6 mm thickness with smooth ball bearing wheel for load & guide wheel for anti tipping .

Track material - Aluminium track makes base of the compacta system rust proof against water contact.

Platform for walkway - 25 mm Laminated Particle board Platform for easy & safe entry exit from the walkways.

Sloping ramp - Aluminium Sloping ramp for easy trolley access & reduce tipping hazard.

Levelers - Easily Adjustable levelers to keep platform & track parallel on uneven surfaces.

Installation of Track -No Hacking of floor is required for easy dismantling & relocation of the system in case required.

Assembly of track - Complete track assembly is on self suspended design, suitable for any surface like cement, tiles, carpet etc

Pulley Belt mechanism results in noise less & Oil free operation.

Mechanism Handle Lock- Ergonomic Plastic handle with inbuilt safety lock mechanism. Lock Central Locking on the last unit which will lock entire assembly.

50 Digitally signed by MOHD

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty DSR Amount Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of required size and shape with

arrangement of screws in the letters itself for mounting on the walls or pasting using 3M VHP Tape.

Fixing complete as per directions of the engineer. The Sizes would be calculated in Sqft as per Logo

Design provided.

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood finish pasted /White

milky acrylic 3mm laser cut pasted on top with proper names/ Departments written using plottercut vinyl

or laser cut acrylic letters in approved colour.Inserting provision for changing names .Fixing provision Each 30 1,967.00 59010.00

using 3M VHP double sided tape as required.

Signage Size 12x5 inch

FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with Evacuation Plan

Printed on photoluminescent media and inserted between the two frames. Should be fixed on the wall Each 5 2,673.00 13365.00

using 4 Screw/ SS studs. Size 12 inch x 17 inch

4 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic sheet of 8 mm

thickness laser engraved, Transformer to be inbuilt. Maintenance - free sealed nickel cadmium battery

included • 120V/277V AC Operation • Crystal clear acrylic face panel• Engraved letters increase visibility

• Anodized aluminum faceplate • Field applied chevron directional indicators simplify installation • Long Each 5 3,289.00 16445.00

life, energy-saving LED lamps • Dual-voltage 120V/277V AC Operation • UL listed. To be installed at

stairs entry. Size 310mm x 175mm

5 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet at base with

photoluminescent film self adhesive & colored vinyl ( Red/Green) Plotter cut and pasted on top. Both

side / Single Side facing Complete including fixing on wall with screws and washers or hanging on

ceiling with GI chain/GI Bar complete as per technical specifications and directions of Engineer.

Photoluminescent signages Each 5 536.00 2680.00

TOTAL 199428.00

Digitally signed by MOHD

SCHEDULE OF QUANTITIES: LANDSCAPE

Product Non DSR

S NO Image Description Unit Qty Rate DSR Amount

MossWall - Customised

“Wall Panel - Plain; Supply, Testing and

Commissioning of maintenance free Moss Wall

of size 600 x 400 mm panel. The plant shall be

for indoor use only and requires no Direct Sun

Light or Watering / Spraying of water. It is

MossWall - certified for sound absobtion rate; fire resistance

Customised and has a very hostile environment for

reproduction of insects. Please ensure 40%

Humidity at all times. It does not require any

trimming as well hence a maintenance free

Make : Verde Profilo, Italy

“FRP Planters; Supply, Testing and

Commissioning of FRP Planters. The Planters

can be used both Indoor and Outdoor. The

Planter Planters are handcrafted in India. It is made

2 Plain - using Fibre Reinforced Plastic (FRP) and has Nos. 10 3,844.00 38,440.00

14x14x14 features such as Light in Weight can withstand

various Environmental Conditions such as Harsh

weather, UV Rays and Moisture. It has Fungus,

Fire and Frost Resistance. In Terms of

Sustainability, Fibre is considered to be Eco-

Friendly and can be Recycled."

Digitally signed by MOHD

Product Non DSR

S NO Image Description Unit Qty Rate DSR Amount

“FRP Planters; Supply, Testing and

Commissioning of FRP Planters. The Planters

can be used both Indoor and Outdoor. The

Planter Planters are handcrafted in India. It is made

3 Wave - using Fibre Reinforced Plastic (FRP) and has Nos. 10 7,047.00 70,470.00

17x18 features such as Light in Weight can withstand

various Environmental Conditions such as Harsh

weather, UV Rays and Moisture. It has Fungus,

Fire and Frost Resistance. In Terms of

Sustainability, Fibre is considered to be Eco-

Friendly and can be Recycled."

“FRP Planters; Supply, Testing and

Commissioning of FRP Planters. The Planters

can be used both Indoor and Outdoor. The

Planters are handcrafted in India. It is made

Box Planter using Fibre Reinforced Plastic (FRP) and has

18x18x18 features such as Light in Weight can withstand

various Environmental Conditions such as Harsh

weather, UV Rays and Moisture. It has Fungus,

Fire and Frost Resistance. In Terms of

Sustainability, Fibre is considered to be Eco-

Friendly and can be Recycled."

Providing & fixing Artificial silk plants with

combination 3 or 4 types uniformaly ditributed

plants on wall as well as ceilig suspended

creepers with necessary wire or hangin

arranement included. Plants which ultraviolet

5 blocking chemicals are impregnated into the Sqm 9 6,214.00 55,926.00

materials during the manufacturing process.

These chemicals are blended with the plastic or

PVC parts Installation Installation is done on

Waterproof ply board with staple gun machine.

1Sq Mtr X 1 Sq Mtr

Digitally signed by MOHD

Product Non DSR

S NO Image Description Unit Qty Rate DSR Amount

Providin & fixing Artificial silk plants with

combination 3 or 4 types uniformaly ditributed

plants on wall as well as ceilig suspended

creepers with necessary wire or hangin

arranement included. Plants which ultraviolet

6 blocking chemicals are impregnated into the Sqm 9 2,370.00 21,330.00

materials during the manufacturing process.

These chemicals are blended with the plastic or

PVC parts Installation Installation is done on

Waterproof ply board with staple gun machine.

Supply of textured stone or solid finished, light

weight (Pls choose : shape: round/ oval/

rectangular/ conical/ elliptical) (Pls choose

:volume : xxx ltrs) (Pls choose :color: beige/

white/ grey/ black) full bodied, exterior grade,

joint/ layer free, homogeneous planters made

with premium quality LLDPE polymer

manufactured with precision rotational moulding

7 process. The planters shall be made of 100% Nos 10 28,186.00 2,81,860.00

recyclable content, industrial grade quality

polymer, non- metallic, shock proof, asbestos

and glass fiber free compounds. Planters shall

be rust proof, UV-resistant, anti-frost, no peeling

and easy to clean. OEM / authorized supplier to

provide 1 year warranty against fading & any

manufacturing defect. Design, color and size as

Digitally signed by MOHD

Product Non DSR

S NO Image Description Unit Qty Rate DSR Amount

Supply of double layered translucent backlit

(Pls Choose : Shape: cylindrical/ elliptical /

conical/ round/ square) hand crafted (dye)

pattern planters of volume Pls Choose :XX

letter; approx. dimension Pls Choose :XXXX in

plain or stone finish. Planters to be indigenously

made by rotational moulding, with homogeneous

100% recyclable, industrial grade LLDPE

polymer mix, with textured surface and stone

8 match finishes. Planters to have concealed Nos. 10 40,998.00 4,09,980.00

shock resistant back lighting system with

secured supply wire and an integrated water

outlet hole & plug, peel proof construction,

asbestos free, light in weight, without any joints,

rust proof, UV stabilized, anti-frost feature and

easy to clean. OEM / authorized supplier to

provide 1 year warranty against fading & any

manufacturing defect. Design, colour and size

as per selection.

Plantation: Supply and installation of Natural

Plant with sand, fertilizer etc.

Digitally signed by MOHD