47/EWCL/2023-24

Amount

Safe loading carriage including unloading & proper stacking of following store materials from any Electy.Store of Lucknow Zone to work site/JE Dump Store.

ST Pole 11 Mt Long-SP-55

Polymeric 11 KV Disc Insulator B&S. Type 70 KN.

Disc Fittings Dog/ Racoon 70 KN.

M.S. Angle Iron 65x65x6mm (5.8 kg./m) with clamp

Top channel 125X65mm, (13.10 Kg./m) with clamp

MS Angles 75x75x6, 2.6mtr long, total 5.2 @ 8.9 Kg/Mtr.

MS. Channel 100X50 mm (9.6 Kg/mtr.) for Cable Stand

GI wire 8 SWG for guarding a cross the line

MS Earth Rod complete

Complete Stay (GI Stay rod 20x1800 mm,

Stay Wier 7/8 SWG

ACSR Dog Conductor

33 KV XLPE Cable 3x300 sq.mm.

33 KV XLPE 3X300 sq.mmm C/J/Kit (Outdoor)

Erection of the following support through digging pits complete in all respect including cutting, making holes, fixing of all types of accessories as per RESSPO/REC drawing. (All type of clamps nut & bolt, washer to be provided by contractor.)

Providing & Fixing of Stone Pad (300x300x75 mm)

33 KV End Type Double pole structure on S.T. Pole 11mtr long complete with Top Channel,bracing.& all other acessories as requred

Concreting of supports with cement, concrete (CC will be of cement coarse sand & Stone Grit) Grouting will be done with the help of wooden/steel formers in a block of size 450 mm x 450 mm x 1/6 of the full length of the support in the CC 1:4:8 ratio and plinthing of supports upto 300mm above ground level as per RESPO/ RES. drawing including back filling and proper ramming.

Earthing of supports with Earth Electrode 2.5 mtr. length including excavation of pit and driving M.S. Rod upto proper depth and connecting the earth electrode with the help of 6 SWG G.I. Wire and earthing lugs. RESPO/ RES. drawing.Earthing of each section pole is also to be done. (All type of clamps nut & bolt, washer to be provided by contractor.)

Erection/fixing for 33 KV Stay set with stay wire 7/8 SWG and clamp as per RESSPO drawing including binding, clambing, clamping, tightening, and nozzeling etc. complete in all respect including its grouting in size 0.60x0.60x0.3 mtr. ratio 1:4:8 of cement, sand and concrete (CC will be of cement coarse sand & Stone Grit). (All type of clamps nut & bolt, washer to be provided by contractor.)

Laying, spreading, lifting, Stringing, jointing and final sagging of ACSR Dog Conductor in accordance with profiles and sag chart including binding, jumpering and fixing of all accessories in 3 nos. conductor in parallel with PG Clamp binding wire etc as requested for job.

Painting of following supports with one coat of red oxide primer and two coats of aluminum white paint of ISI mark and top danger portion of each support must be painted by providing two coat of Post Office Red Paint (1.5mtr upper portion of support.) Paint and material would be given by contractor to complete of job. (All materials to be provided by Contractor).

End Type Double Pole of 11 M S.T.P

Providing & Fixing of 33 KV SMC Danger board ( as per RESPO/REC)with Clamp & Nut Bolt

Providing & Fixing of 33 KV SMC Number Plate ( as per RESPO/REC) with Clamp & Nut Bolt

Providing & Fixing of G.I. Barbed wire (2 Kg./pole)

Laying of 33 KV, 3x300 Sqmm XLPE Cable (single circuit) by digging method depth minimum 1.2 mtr. Below ground level and 750 mm wide by excavation of earth. The work include supplying of fine sand ,bricks,stone slab ,refilling and ramming of the left out soil and levelling etc.

Hoisting of 33 KV 3X300 Sq. mm. XLPE cable on double pole including G.I. pipe of size 6" dia 3 M long and its jumpering complete with clamps, nuts and bolts. (All material include GI Pipe to be provided by contractor).

High Pressure Testing

M/S SHAIL ELECTRICALS