SPL REPAIRS TO BLDG NO E 16 AND E 23 ASBESTOS SHEET TO GALVANIZED SHEET OF 454 FD HOSP AND ADDN / ALTN OF TILING OF PLUMBING IN TOILETS BATHROOM AND KITCHEN AT BLDG NO P 42/01 TO P 42/08 (08 QTRS) OR MD ACCN AT ABC LINE OF AOC CENTRE GE (S) SECBAD

Amount

Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering complete all as specified and as directed.

S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified.

S&F pre painted gal valume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws as specified

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. complete all as specified and as directed.

M & L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out og GI flat 40 x 3 size 60mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as sepcified and directed

M & L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as sepcified and directed

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and as directed.

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A complete all as specified and as directed.

Fixing only roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A. complete all as specified and as directed.

M & L for preparation of old steel surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint. complete all as specified and as directed.

M & L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and as directed.

M & L for providing cement concrete type B-1 1:2:4 (using 20mm crushed graded stone aggregate) as in copings, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M & L for rendering 15mm thick cement plaster in CM( 1:4) on block walling surface finished even and smooth without using extra cement complete all as specified

M & L for two coats of cement based paint over and include one coat of cement primer for preparation of newly plastered wall surfaces and complete all as specified and as directed.

M & L for applying two coats of distemper oil emulsion on walls over a coat of cement primer for preparation of newly plastered wall surfaces and complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M & L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed. .

M & L for brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and as directed.

M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed.

Demolition of cement concrete in any desscription and any position paving exc 15 cm thickness below and above ground level complete all as specified and directed.

Taking down the plaster incl existing treatment in sunken portion , washing down with water and applying 15mm thick plaster in CM 1:4 mixed with 3% of total weight of cement or as per manufacturer's instructions WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately under the relevant item.)

M & L for PCC 1:4:8 type D-2 (using 40 mm graded brick aggregate as in filling of sunken portion etc complete all as specified and as directed. .

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and as directed.

M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top and bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement as per specification and drawing as per SSR Pt I complete all as specified and as directed.

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified and as directed.

S & F Aluminium handle 150mm fabricated type complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

M & L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm crushed graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed.

M & L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors including taking down complete all as specified and as directed.

S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.

S&F in repairs stop cock 15mm dia cast copper alloy with crutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed.

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs Swivel shower of PTMT any colour for fixing in repairs with 15mm pipe. Min wt 40 gms complete all as specified and as directed.

S&F in repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP pillar taps

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 600mm x 600mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws complete all as specified and as directed. Note : Weight of rack shall not be less than 3.80 Kg.

S&F rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed.

S & F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia any radius complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed.

S&F PVC (SWR) bends 75mm dia any radius with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M & L for submain 2 run of 1.5 Sq mm PVC insulated cable FRLS type 1.1KV single core , multistranded copper conductor drawn through and including stove enamelled steel conduit of suitable size for flame proof wiring complete with flame proof accessories concealed in wall/surface mount with 1 run of 1.5 sqmm single core PVC insulated solid copper conductor cable 1.1KV grade FRLS as earth continuity wire,for connecting to the common earth dolly for One light point /One ceiling / exhaust fan point controlled by one, one way flame proof switch complete all as specified and as directed.

S & F flame proof/WP rotary type with terminal box in LM 6,10A,single pole of capacity 230 volts complete all as specified and as directed.

S & F flame proof/WP DB SPN 6 way rated bus bar 240 Volts,IP65 protection complete all as specified and as directed.

S & F LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectionwith die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with threecore flexible copper conductor cable and metalllic Ceiling rose complete all as specified and as directed.

M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for: (a) One light point controlled by one, one way switch 5A, SP complete all as specified and as directed.

(b) One ceiling / exhaust fan point controlled by one, one way switch complete all as specified and as directed.

(c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

(d) One 3 Pin 5 Amps switch socket Independt board complete all as specified and as directed.

Description all as per item No 72 here-in-before but using 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts complete all as specified and as directed.

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and as directed.

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified and as directed.

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified and as directed.

S & Fix ceiling fan regulator step socket type AC 240 volt suitable for 1200 mm sweep complete all as specified and as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.

S & F Vertical loadline type TPN DB 4 way double door with fixed magnetic setting for current rating of 100 Amps 16 KA (MCCB TP volts AC 3 phase 50 Hz ) confirming to IS specification made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed.

S&F MCCB 415 V,16KA,100 A 4 pole suitable for DB including the existing unserviceable one and making good the disturbed surface to match with the existing surface complete all as specified and as directed.

S&F sheet metal enclosure MCB DB SPN 8 way 240 Volts double door with magnetic locking system complete all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 4 way 240 Volts double door with magnetic locking system complete all as specified and as directed.

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed.

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 63 Amps complete all as specified and as directed.

M & L for concealed Submain wiring with two single core 6 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through and including rigid steel conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.(for TPN DB to SPN DB 8 Way)

S & F wall mounted box type LED of 20 watt with LED Lamp, with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F LED bed side light fitting with lamp capacity 9 W adjustable type including complete all as specified and as directed.

Supply and install window type desert cooler electric driven single phase AC 230V, 50HZ, copper wound as per IS, 3 speed, 51 L capacity, blower type fan, not less than 3200 cum per hour 150 sqft minimum cooling area, engineering plastic body, auto louver and oscillation function with castor wheels at the bottom, auto fill mosquito net, honey comb model and beige/white colour and including suitable metal stand all as specified and directed. Note: The rate includes the provision of seperate metal stand made up of suitable channel thickness to hold the weight of desert cooler of suitable height so as to match with the window height and painted in black/blue. Make Koolaire -W of Havells or technocommericially equivalent in other make : of Bluestar /Voltas/Daikin complete all as specified and as directed.

S & F for 12 Watt LED Bulb complete all as specified and as directed.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed.

S & F Security Lights of 1x45 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and as directed.

M & L bracket made out of GI pipe of 32mm dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed.

Disconnecting the unserviceable earthing and M & L for Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the ceiling fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing for wall mounted fan complete including replacement of worn out/defective parts such as capacitor, sealed ball bearing, rubber bushes , split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of wall mounted fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. NOTE: Quoted rate includes cost of capacitor, ball bearing, rubber bushes, misc items etc.

Supply & fix Exhaust fan of metal body 250 mm sweep with metallic louver including connecting up of PVC insulated copper conductor multi stranded cable of suitable size from ceiling rose to connector complete all as specified and as directed

M & L for cutting of wall in round shape irrespective of height of building using machine cutting only and making opening suitable for mounting of 250 mm dia exhaust fan and making good disturbed surfaces including grouting of nuts and bolts and clearing the debris and making the work area clean complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply & fix pedestal fan of sweep 400 mm complete all specified and directed Make:Orient or techno equivalent in Havells/ Usha.

Disconnection and removing the unserviceable earthing and M & L of Earthing complete with copper earth plate electrode 60cmx60cmx3.15mm thick electrode buried directly in ground earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.5 m below ground level connected to copper earth strip 20x3 mm by means of bolts, nuts, check nuts and washers etc of copper and earth lead protected by provision of GI pipe 40 mm bore of medium grade from earth electrode to test point incl provn of concrete pit in PCC(1:2:4) type B-1 using 20 mm graded stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (Weight not less than 4 Kg/Sqm) PCC cover with handle and with 6 mm dia MS bar handle made to shape, GI pipe medium grade 20 mm bore pipe for watering perforated at bottom1.75 mtr long placed on top edge of earth plate, common salt (100 KG) and charcoal(100 KG) and BFC(100KG) compound filling with alternate layers test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50 mtr, all as per Electricalplate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. (Note1: copper earth strip and protection pipe 40 mm bore GI medium grade beyond 7.5 mtr will be measured and paid seperately under the respective item of the schedule Note2: Testing of earth resistance done by the contractor at his own arrangements and maximum acceptable earth resistance should be less than 5 Ohm . Note 3: Contractor should maintain the Earth testing register signed by the User unit(Rep of 54 Inf DOU not below the Qauarter Master level) and MES authorities for all the earthings and submitted to the Engineer in charge before claiming the RAR amount. Note4: Payment for the contractor will not paid if the earth resistance is greater than or equal to 5 Ohm . Note5: Test Terminal block ,Copper strip 20 x 3 & GI pipe 40 mm up to 7.5 Mtr are included in the rate quoted by the contractor

M & L of multi point Air termination , copper rod 12 mm dia and 300 mm long with necessary fixing arrangements such as nut,bolts,welding etc as reuired at site on roof of bldg including taking down old unserviceable one complete all as specified and as directed.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including hex. Head screw 3 Nos 8 mm dia 25 mm long including taking down old unserviceable one

Supply and fix copper strip Copper strip 20 x 3 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete including taking down old unserviceable one complete all as specified and as directed.

Supply and fix of Copper strip 32 x 6mm buried in ground as continue earth lead from copper earth plate to test terminal point for complete including taking down old unserviceable one complete all as specified and as directed.

Supply and lay of 'Medium grade',galvanised steel tube of dia 40 mm , incl PCC 1:2:4 on roof for fixing of lightening arrester with necessary fixing arragements including taking down old unserviceable one complete all as specified and directed

M/S RADHIKA ENTERPRISES (BID ID -3169730)

PARDEEP AND CO (BID ID -3170511)

RAGHAVENDRA CONSTRUCTIONS (BID ID -3170461)

M/S P.SWAROOP KUMAR (BID ID -3170396)

K LAKSHMAN SINGH AND CO (BID ID -3169880)

SAI RUPA CONSTRUCTIONS (BID ID -3170033)

SAI RAM CONSTRUCTIONS (BID ID -3168546)

SHAH ENTERPRISES (BID ID -3170408)

STANDARD AGENCIES (BID ID -3170213)