Supply, installation, testing and commissioning of 2 numbers 100 MT capacity Electronic Pitless Type Road Weighbridge including Civil and Electrical Works along with 4 years of CAMC after 1 years of guarantee/Warranty Period at two locations of Sala

Dalmia WB No-1, Salanpur Area

Dalmia WB No-2, Salanpur Area

Item Wise BoQ

BoQ_Ver3.0

Tender No:

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply and Fabrication of 16 Mtr x 4 Mtr platform as per the design & specification (Annexure A of Scope of Work)

ISMB (600 X 210 X 12) Size in MM - Total length about 34 MTR

ISMB (450 X 150 X 9.4) Size in MM- Total length about 34 MTR

ISMB (300 X 140 X 7.7) Size in MM- Total length about 60 MTR

12 mm MS Plate- approx 66 SQ. MTR

20 mm MS Plate- approx 1.0 SQ. MTR

M20 x 50 HT Bolt & Nut

Top Bolt with Nut Machine 19 X 300

Fabrication Cost

Sub-total (Annexure-A)

Electronic Weighing System as per specfication (Annexure B of Scope of Work)

30 Te capacity digital load cell as per specification

Digital Weight Indicator (Dizitizer for Digital Load Cells)– 100 t capacity

Jumbo Display Unit

Junction Box

Computer/PC with accessories as per specification

Furniture & Fixtures for weighing room as per specification

1.5 Te Air conditioner machine with suitable voltage stabiliser (5 KVA)

3KVA Constant Voltage Stabiliser / CVT

Sub-total (Annexure-B)

RFID/ Weighbridge Automation System (Annexure C of Scope of Work)

RFID tag

Long Range RFID Reader/Writer with pole and mounting

Signal Light For traffic control

5 Mtr Long Boom Barrier complete with Trigger Switch, operating & Safety Sensor (with IP54 protection)

3 KVA UPS with 12 nos. Battery (65Ah) and 2 hrs full load backup

Network Switch unmanaged (16/18port)

9U Rack

Laser/Inktank Printer

Integration various models existing CCTV hardware with RFID system for snapshot

Application software as per Specification

Surge Protection devices (SPDs)

Chemical Earthing Kit of Suitable length

Lightning arrestor as per system requirement

HDPE Pipe

Cat6 Cable

Cable

Battery stand

Sockets

Connectors for wire

Plug(6/WB)

Installation, commissioning & complete integration of all the items

Sub-total (Annexure-C)

CCTV Survillance System (Annexure D of Scope of Work)

5 MP Bullet IP Camera (Motorized vari-focal lens)

5 MP IP Dome Camera

NVR 4 Channel with 1 TB storage

8 Port unmanaged switch

Installation, testing and commissioning charges

Sub-total (Annexure-D)

Lightning, Surge Protection and Earthing System (Annexure E of Scope of Work)

Supply of 16 mtrs long tubular pole including lightning arrestor .

Transporting of 16 mtrs long tubular pole .

Erection of 16 mtrs long tubular pole with cement concrete foundation .

Supply and drawing of 10 sq mm copper cable from lighting arrestor point to earth pit .

Supply and fabrication of difference type of MS bracket .

Supply and drawing of GI Wire for making of net wire .

Supply and fixing of chemical Earth pit with providing required materials . a ) Supply of Earthing , electrode , specification for one set as b ) Length = 3000mm c ) Outer dia = 25 mm d ) Connection terminal = 14 mm e ) Core Material High tensile low carbon steel rod

Supply of backfill chemical earth resistance enhancing compound ( 25 kg in each bag ) 2 bag each hole .

Supply and drawing of 16 sqmm 2 core armoured aluminium cable for neutral earthing .

Labour charges for earth pit excavation, earthing installation, connection and related civil work

Testing and commissioning of earth pit as per IS:3043 standards

Sub-total (Annexure-E)

Construction of weighbridge foundation, inclined ramp with retaining wall and drain (As per Annexure H of Scope of Work)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

P/L in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing & laying polythene sheet 400 G

Sub-total (Annexure-H)

Installation, training, commissioning & complete integration of all the items along with other miscellaneous items

Comprehensive annual maintenance contract as per Annexure-I of Scope of Work

Item Wise BoQ

BoQ_Ver3.0

Tender No:

Bidder Name :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply and Fabrication of 16 Mtr x 4 Mtr platform as per the design & specification (Annexure A of Scope of Work)

ISMB (600 X 210 X 12) Size in MM - Total length about 34 MTR

ISMB (450 X 150 X 9.4) Size in MM- Total length about 34 MTR

ISMB (300 X 140 X 7.7) Size in MM- Total length about 60 MTR

12 mm MS Plate- approx 66 SQ. MTR

20 mm MS Plate- approx 1.0 SQ. MTR

M20 x 50 HT Bolt & Nut

Top Bolt with Nut Machine 19 X 300

Fabrication Cost

Sub-total (Annexure-A)

Electronic Weighing System as per specfication (Annexure B of Scope of Work)

30 Te capacity digital load cell as per specification

Digital Weight Indicator (Dizitizer for Digital Load Cells)– 100 t capacity

Jumbo Display Unit

Junction Box

Computer/PC with accessories as per specification

Furniture & Fixtures for weighing room as per specification

1.5 Te Air conditioner machine with suitable voltage stabiliser (5 KVA)

3KVA Constant Voltage Stabiliser / CVT

Sub-total (Annexure-B)

RFID/ Weighbridge Automation System (Annexure C of Scope of Work)

RFID tag

Long Range RFID Reader/Writer with pole and mounting

Signal Light For traffic control

5 Mtr Long Boom Barrier complete with Trigger Switch, operating & Safety Sensor (with IP54 protection)

3 KVA UPS with 12 nos. Battery (65Ah) and 2 hrs full load backup

Network Switch unmanaged (16/18port)

9U Rack

Laser/Inktank Printer

Integration various models existing CCTV hardware with RFID system for snapshot

Application software as per Specification

Surge Protection devices (SPDs)

Chemical Earthing Kit of Suitable length

Lightning arrestor as per system requirement

HDPE Pipe

Cat6 Cable

Cable

Battery stand

Sockets

Connectors for wire

Plug(6/WB)

Installation, commissioning & complete integration of all the items

Sub-total (Annexure-C)

CCTV Survillance System (Annexure D of Scope of Work)

5 MP Bullet IP Camera (Motorized vari-focal lens)

5 MP IP Dome Camera

LED Display 32 Inches

NVR 4 Channel with 1 TB storage

8 Port unmanaged switch

Installation, testing and commissioning charges

Sub-total (Annexure-D)

Lightning, Surge Protection and Earthing System (Annexure E of Scope of Work)

Supply of 16 mtrs long tubular pole including lightning arrestor .

Transporting of 16 mtrs long tubular pole .

Erection of 16 mtrs long tubular pole with cement concrete foundation .

Supply and drawing of 10 sq mm copper cable from lighting arrestor point to earth pit .

Supply and fabrication of difference type of MS bracket .

Supply and drawing of GI Wire for making of net wire .

Supply and fixing of chemical Earth pit with providing required materials . a ) Supply of Earthing , electrode , specification for one set as b ) Length = 3000mm c ) Outer dia = 25 mm d ) Connection terminal = 14 mm e ) Core Material High tensile low carbon steel rod

Supply of backfill chemical earth resistance enhancing compound ( 25 kg in each bag ) 2 bag each hole .

Supply and drawing of 16 sqmm 2 core armoured aluminium cable for neutral earthing .

Labour charges for earth pit excavation, earthing installation, connection and related civil work

Testing and commissioning of earth pit as per IS:3043 standards

Sub-total (Annexure-E)

Supply of Portable Cabin (Annexure F of Scope of Work)

Civil Foundation for portable cabin (As per Annexure G of Scope of Work)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

P/L in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Sub-total (Annexure-G)

Construction of weighbridge foundation, inclined ramp with retaining wall and drain (As per Annexure H of Scope of Work)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

P/L in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

P/L in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)

Providing & laying polythene sheet 400 G

Sub-total (Annexure-H)

Installation, training, commissioning & complete integration of all the items along with other miscellaneous items

Comprehensive annual maintenance contract as per Annexure-I of Scope of Work

NIT No:

Name of the Bidder/ Bidding Firm/ Compnay

Number of Weighbridges for which the bidder wishes to offer rate

Mention Name of Weighbridges

NIT No:

Name of the Bidder/ Bidding Firm/ Compnay

WORK EXPERIENCE

Start Date:

End Date:

NIT No:

Name of the Bidder/ Bidding Firm/ Compnay

Details of FINANCIAL TURNOVER of Bidder as per Clause No.6 (B) of NIT:

The Bidder must have an Average annual financial turnover during the last 3(three) years, ending 31st March of 2020, at least 30% of the estimated cost (i.e. 30% of INR 236,84,11,000.00) INR 71,05,23,300.00 put to tender

NOTE: Bidder should possess Average Financial Turnover within last three years certified by Chartered Accountant (CA) as per NIT. The respective information as saught hereunder need to be furnished by the bidder.

FINANCIAL TURNOVER

ANNUAL FINANCIAL TURNOVER during the last 03 consecutive years to be filled by the bidder [Please refer 8(B) of NIT]:

Average annual Turnover