10/SE/EWC/AYO/2020-21

Amount

Carriage of following material (FROM SI. No. 1.01 To 1.17) from store centre under EEESD, Ayodhya to dump store & from dump store to the site of work including loading, unloading and proper satcking at site etc.

33 KV V Type channel cross arm 100x50x60

Stay wire 7/8 SWG.

ACSR Dog Conductor

STP 11.0 Mtr. Long

33 KV Pin Insulator .

11 KV Disc insulator B & S Type.

M.S. Top Channel 125x65 mm 3200 mm long

M.S. Angle 65x65x6 mm Bracing, 4300 mm long

Gaurding Angle 65x65x6 mm, 3500 mm long

G.I. Wire 8 SWG for guarding (Across the line)

G.I. Wire 6SWG for guarding (Along the line)

33 KV 3x300 sq mm XLPE Cable

33 KV Outdoor jointing Kit for 3x300 sq mm XLPE Cable

33 KV Post Insulator

M.S. Angle 75x75x6 mm

M.S. Channel 125x65 mm

33 KV Straight Through Jointing for 3x300 sq mm XLPE cable

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Single Pole for 33 KV Line on 11 Mtr ST Pole with fitting of necessary clamp & other acessories like 1 no Channel Cross Arm, (Contractor shall provide 3 nos. 33 KV G.I. Pin, necessary clamps, F-brackets/Top cleet, Nut - Bolts, Washers & all Civil Materials)

Safe Dragging/ Loading - unloading from dump site to pit site and Fabrication & erection of Sectional Double Pole pole of 33 KV Line on 11 Mtr with fitting of necessary clamp & other acessories like 1 No Top channel of 125x65 mm size, Fitting of Bracing angle, (Contractor shall provide 3 No G.I. Pin, necessary clamps, Disc Fitting, Nut - Bolts & all Civil Materials)

Erection of single stud pole support one ST Pole 11.0 Mtr long with fixing of necessary clamps and other accessories required for erection . (Contractor shall provide necessary clamps, Nut - Bolts, Washers etc)

Cradle Guarding of 33KV line at road crossing, 11KV line crossing, canal/telephone line crossing by fixing M.S. angle 65X65X6mm, 3500 mm at double pole and 2600mm long at single pole by stringing and sagging of 3 No. G.I.wire and all fittings ,tightining with mounting.

Earthing of Pole STP/PCC by 6 SWG Wire by providing and fixing of earthing rod as per norms by connecting cross arm,g.i.pin ,pole to earth rod complete in all respect. (Contractor shall provide all the material Like Earthing rod , 6swg G.I. wire)

Laying,Stringing, sagging, and binding of ACSR Dog conductor 3 Phase of 33KV Line including fixing,mounting of gun fittings suitable for Dog Conductor at sectional point. (Contractor shall provide necessary gun fitting(Three bolt tension hardware), Bolt and Nuts etc)

Fabrication & Erection of Cross arm support size 65X65X1550 mm. with holding clamps. (Contractor shall provide all materials like 65X65X6 mm angle & holding clamps and nut bolt )

Jumpering by ACSR Dog Conductor at Sectional pole including providing PG Clamps and necessary clamps & Nut bolts.

Nozeling and grouting of stay at sectional pole and extra stay sets at angle locations (All the civil material ,Clamps , N&B arranged by the contractor except stay set and Stay Wire.)

Painting of Structure Painting of 11 Mtr STP/ rail support structure with one coat of ready mixed primer and 2 coats of AL.Paint of good quality including cost of material, Labour and T&P complete in all respect.

Grouting of 11 Mtr STP support structure by digging of pit 1.5 Mtr/1.83 Mtr deep for 11 Mtr STP respectively, groutung with 1:4:8 Ratio cement, coarse sand & 20mm gauge stongrit 0.268/0.285 cu mtr for 11 mtr STP, plinthing 0.3 Mtr above G/L and proper plastering.

Laying of Double circuit In Normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks, Inter axial spacing between the two cable should be in between 0.25 m to 0.40m , the two cables should be separated by a partiton of single bricks& stone slab for covering calbe (All the material will be supplied by the contractor like bricks, sand, Stone Slab etc, except 33KV XLPE cable)

Laying of HDPE Pipe in Crossings and laying of cable in it. (All the material will be supplied by the contractor like HDPE Pipe 6" NP-6 Specification etc except 33KV XLPE cable)

High Pressure testing to which 33 KV Line able to be stand for duration of 5 minutes after completion of Laying, Stringing, sagging, binding and Jumpering of ACSR Dog conductor. ( Testing equipment will be arranged by the contractor)

Hosting of 33 KV Cable on existing/erected support with provision of MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping , providing long barral lugs 6 nos and P.G. Clamps & "Y" shape jumpering properly and 02 nos. supporting angle 65X65X6, 3500 mm as per RESSPO Norms. (All material will be supplied by the contractor like MS Pipe , P.G. Clamps, Al. Lug And Supporting Angle 65X65X6, 3500 mm).

Installation of Heat Shrinkable Type cable jointing kits O/D end Termination suitable for 33 KV XLPE cable confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.

Painting of 33 KV Cable Stand with one coat of ready mixed primer and 2 coats of Alu.Paint of good quality including cost of material and T&P complete in all respect.

Installation of Heat Shrinkable Type cable jointing Straight Through kit suitable for 33 KV XLPE cable confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any.

Fabrication, Erection and grouting of cable joint/ route marker. ( Contractor shall provide all materials)

M/s Shukla Enterprises

M/S INDIA ELECTRICALS