GE/U(N)-25/2021 22 PROVISION OF COVERED SHED FOR RECEPTION AND ADDITIONAL ALTERATION TO B NO T 79 P02 NP35 NP95 OF SUBAREA AND TRANSIT CAMP AREA INCLUDING SPECIAL REPAIR TO BLDG NO T132 OF AGE BR-I OF GE NORTH UDHAMPUR

Amount

Demolition of brick work of any thickness built in CM complete all as specified and directed by Engr-in-Charge

Dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge

Demolition of un-reinforced cement concrete in ground floors for levelling of and pavings not exceeding 15 cm thickness including floor finish complete all as specified and directed by Engr-in-Charge

Dismantling structural steel work including doors, gates but excluding framed truss etc for refixing of the same complete all as specified and directed by Engr-in-Charge

Dismantling timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed by Engr-in-Charge

Dismantling framed trusses complete all as specified and directed by Engr-in-Charge

Dismantling cast iron work of any description complete all as specified and directed by Engr-in-Charge

Taking down the shutter of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge

Taking down Chowkats or frames n.exc 1.5 Sqm with shutters (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.m each (Without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge

Taking down & refixing the shutter of any description exc 1 sqm but n.exc 2sqm each in same complete all as specified and directed by Engr-in-Charge

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50m in depth in foundation in hard/dense soil and getting out complete all as specified and directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/ dense soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Reinforced cement concrete, 1:11/2:3, type A-1 (using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed.

M&L for nominal mix Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in beam, band, slabs, cover slab for manholes etc , complete all as specified and directed by Engr-in-Charge

M &L for Plain Cement Concrete Type C1 1:3:6 (using 12.5 mm graded aggregate) as in roof padding / leveling coarse in between wall and roof sheet, or chamfered on edges finished even and smooth with using extra cement and water proofing compound. ( Water proofing compound shall be measured and paid sepratly ) complete all as specified and directed by Engr-in-Charge

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mmgraded crushed stone aggregate as in coping,bed plates benching etc slightly round or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge

M&L for providing Plain cement concrete 1:3:6 type C-O using 12.5 mm graded crusher stone aggrergate for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 , complete all as specified and directed by Engr-in-Charge

All as per item No 23 herein before, but except bricks complete all as specified and directed. Note-Old bricks obtained against dismantling shall be used complete all as specified and directed by Engr-in-Charge

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L for TMT steel bars, 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed.

M&L for Mild steel bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

M&L for 10 mm thick rendering in cement mortor 1:6 on fair face on brick/concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for rendering 5 mm thick in cement mortor 1:3 on ceiling without using extra cement complete all as specified and directed by Engr-in-Charge

Supply only integral water proofing compound @0.200Ltr per 50kg of cement or as per manufacture inst as complete all as specified and directed by Engr-in-Charge

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed with spacer and laid with epoxy grout in neat cement slurry and pointed to match including 15 mm screed bed 1:4 cement mortar complete all as specified and directed.

M&L non - skid Ceramic joint less tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over screed bed 15 mm in CM 1:6 all as specified.( complete all as specified and directed by Engr-in-Charge

M&L Glazed ceramic tiles 300x600x8 mm to 10mm thick in vertical surfaces such as skirting, dadao and risers to steps over 10 mm thick in CM(1:4) incl taking down from existing surfaces complete all as specified and directed. complete all as specified and directed by Engr-in-Charge

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including rubbing and polishing complete over and including screed bed 20 mm thick in CM (1:4) complete all as specified and directed by Engr-in-Charge

All as per srl item no 35 but on vertical surfaces as risers incl M&L 5 mm thick screed in CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L for marble strip cut to width n.exc 100mm wide fixed as border in stair case walk ways etc over cement screed base laid and joined with grey/ white cement with pigment to match the shade., complete all as specified and directed by Engr-in-Charge

M&L for kota stone slab window cills/steps(single piece) incl bull nosing rounding edges directed colour, 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with grey cement shade of slab including grinding and polishing, over 10mm thick rendering in CM 1 :3 complete all as specified and as directed.

M & L for Red/Black granite(of any type)stone slab 16mm thick machine cut as in window cill/counter top slab bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with rounding to edges of stone slabs one edg complete Including 10mm thick backing coat CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L for applying of new plastered surfaces of ceiling and applying two coat of white washing , complete all as specified and directed by Engr-in-Charge

M&L for applying two coats of white wash over prepared ceiling old surfaces after complete removal of existing treatment complete all as specified and directed by Engr-in-Charge

M&L for applying of old plastered Rubbing,stopping of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed by Engr-in-Charge

M&L for two coat of cement base paint over a coat of alkali resistant primer paint including preparation of newly plastered of wall complete all as specified and directed by Engr-in-Charge

Preparation of old plastered or un-plastered surface by brooming down or steel wire brushing,scraping down smoke soot, moulds moss and efflorences salts and trading oil and greasy spots and filling nails marks with compound of wall putty and sand papering and applying one coat of distemper oil emulsion white or tinted on walls/ceiling, complete all as specified and directed by Engr-in-Charge

M&L for two coats of oil bound distember over a coat of primer over 2 to 3mm of approved wall care putty in two coats over including preparation of old plastered surfaces of wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of priming over 2 to 3mm thick of wall care putty in two coats complate all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and inclusive 30 mm thick sand filling complete all as specified and directed by Engr-in-Charge

Laying pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and inclusive 30 mm thick sand filling complete all as specified and directed by Engr-in-Charge

Material and labour for 50 mm thick plain cement concrete type C-1 1:3:6(Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed. Note : The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item complete all as specified and directed by Engr-in-Charge

M&L for 75 mm thick Cement concrete type D-2 , 1:4:8 using 40mm graded aggrigate complete all as specified and directed by Engr-in-Charge

M&L for Concrete bed to drain pipes of bore 150mm after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports, complete all as specified and as directed.Note:- (i) Thickness of bed belew barrel of pipe -10 cm. (ii) Width of bed :- outer dia of pipe plus 30 cm. complete all as specified and directed by Engr-in-Charge

M&L Reinforced concrete pipes 150mm dia, class NP2, laid & jointed complete with collars complete all as specified and directed by Engr-in-Charge

M & L for Formwork to sides and soffits of floor or roof beam, beam haunching girders, bressum-mers, lintels cantilevers, shelves including supports,overhangs etc also splays between floors and beams, etc complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs,floor slabs,landings & similar work,not exc 200mm thick(horizontal or sloping)fair finishes surfaces of cocrete flat complete complete all as specified and directed by Engr-in-Charge

Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed by Engr-in-Charge

S&F 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-Charge

S&F 35 mm thick 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge

M&L 35 mm Glazed and skeleton shutters, 2nd class H.W open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge

S & F powder coated (of approved colour ) aluminium sections as in frame & shutter of doors, windows (Hung/sliding), ventilators (louvers/fixed type) and fixed frame etc fixed to wall including, preparation of disturbed portion both side (internal & external surfaces of wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified and directed. Note : Weight for measurement shall be assesed by BOO

S&F 250 mmAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of xtruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F powder coated aluminium Deco grill DG 202 pattrn with apperture of size any size securing with suitable aluminium channel to frame complete all as specified and directed. Note : Weight for measurement shall be assesed by BOO

S & F Stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws complete all as specified and directed.

S & F Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified and directed.

S&F of aluminium composite pannel (ACP) of 4 mm thick sheet coated mirror glossy finish/ Natural wood finish approved colour, paatern and design and as required shape like rectangular, trapezodial or tappered shape and as per sample kept in GE office with polyvinylidene fluoride (PVDF) of flat pannel that cosist of two thin aluminium sheets bonded to a non-aluminium core of flat sandwich panel is a structure of three layer aluminium core bonded between two sheets of required size fixed with heavy duty screws on aluminium channel of 38 mm x 25 mm , and used for external cladding or facades, partition, false ceiling, signage etc and top layer with 5mm thick colored glass on aluminium channels of required size. The joints in bet two sheets are filled with silicone of transulent, white or black in colour with the help of portable punch machine work pneumatically after cutting the corners and edges. A protective film on ACP is removed after installation complete all as specifieed and as directed. Note :- 1. The scope of works includes for (i) supply and fixing of aluminium standard profile sections 38x25mm etc for vertical and horiontal members & spacing as per manufacturer or as required at site including providing and fixing connectors, flange brackets, framing profile, end caps, etc. Complete all as per manufactures instructions. (ii) Floor grouting of the complete enclouser shall be proviede at every pillar element. Fixing with anchor fastners wherever required, applying jointing acessories, cutting, finishing and assembly of aluminium profiles, cutting panels to required size, providing extra framework around opening, etc, complete as per site requirements, specificatios & as directed by Engr-in-Charge.

S&F floor door stoper of 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F Stainless Steel 'S' Shape Handles 300mm long Fancy type fixed with screws to door shutters complete all as specified and directed.

S&F Aluminium powder coated (match with door shutters) Hydraullic door closer suitable for aluminium glass door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed complete all as specified and directed.

S&F Powder coated Aluminium Towerbolt Hinges 200mm long match with door shutters fixed to door shutters with screw complete all as specified and directed.

S&F Mortice lock with two lever brass body (vertical type) 100mm length of latch with 3 set of keys fixed in door shutter with proper in position complete all as specified and directed.

Cutting holes in brick walls built in cement mortar and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc hail but n.exc one brick complete all as specified and directed by Engr-in-Charge

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed by Engr-in-Charge Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item No 71.00 here in before but without glazing bar complete all as specified and as directed.Note :( i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3 (ii) Glazing wire gauge shall be measured and paid for separately complete all as specified and directed.

Factory made mild steel ventilators box type glazed or gauged with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all specified.Note :( i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid for separately complete all as specified and directed.

S&F Factory made solid panel PVC door shutter of wall nut colour30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & ottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with uitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed by Engr-in-Charge

S&F 18 mm thick Prelaminated MDF Board particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with crews to timber frame work including edge bending tape of similar shade as in as in cabinet / cupboard shutters complete all as specified and directed.

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 100mm long complete all as specified and directed.

S&F 100 mm Hasp and staple, mild steel, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge

S&F in repairs sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge

M&L for Preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old treated wooden Surfaces incl preparation of old surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed by Engr-in-Charge

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white,water closet with integral foot rests complete incl trap set in and provision of lime concrete filling in sunken portion complete all as specified and directed by Engr-in-Charge

S&F PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including breckets, suitable flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge

S&F Vitreous China wash basin, white, flat back, size 550x400mm including fixing supply PVC waste pipe, CP waste coupling and MS bracket all as specified as directed by Engr-In-Charge.

S&F Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engr-in-Charge

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipes complete all as specified and directed by Engr-in-Charge

Taking up/down steel tubing and connections including cleaning for refixing or removal to store 25mm -32 mm bore pipes. complete all as specified and directed by Engr-in-Charge

S&F 15 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge

All as per si no 101 but except pipe complete all as specified and directed by Engr-in-Charge

S&F 25 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge

All as per si no 110 but except pipe all as specified complete all as specified and directed by Engr-in-Charge

S&F in repairs 32 mm High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm ® complete all as specified and directed by Engr-in-Charge

Dismantling water tanks of 1000 ltrs and removing to store, complete all as specified and directed by Engr-in-Charge

M&L in repairs for1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including connection nipple of suitable size (inlet, outlet & washout) complete all as specified and directed by Engr-in-Charge

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in position complete all as specified and directed by Engr-in-Charge

S&F Bib tap 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm - 90gms) complete all as specified and directed by Engr-in-Charge

S&F 15mm size Stop valve of PTMT any colour high pressure screwed down with crutch or butterfly handle screwed both ends for for iron pipe for uinion and fixed in repairs complete all as specified and directed by Engr-in-Charge

S&F Stop valve 15mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and directed by Engr-in-Charge

S&F in repairs soap dish,PTMT white, apporimate size 160mmx160mmx90mm complete all as specified and directed by Engr-in-Charge

S&F in repairs stainless steel 25mm dia (as approved by GE) fixing brackets stops rollers etc fixed with plastic sleeves complete all as specifed and directed by Engr-in-Charge.

S & F 50mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 including necessary fittings sockets/bends/reducers/Tee etc ffixed complete to walls, ceilings or in floors complete all as specified and directed by Engr-in-Charge

S&F 75 mm sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engr-in-Charge

S&F 100mmSand Cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid to walls complete all as specified and directed by Engr-in-Charge

S&F 100 mm cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge

S&F 75 mm cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engr-in-Charge

S&F 100mm cast iron bends (any radius) with oval access or heel rest complete all as specified and directed by Engr-in-Charge

S&F 75mm plain cast iron bends (any radius) with oval access complete all as specified and directed by Engr-in-Charge

S&F 100 mm CI cowls fixed to vent pipes complete all as specified and directed by Engr-in-Charge

S&F 100mm dia disminishing piece/junction plain any radius fixed ti CI pipes in reducer complete all as specified and directed by Engr-in-Charge

S&F 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge

All as item no 123 above but of Cast iron Nahani trap complete all as specified and directed by Engr-in-Charge

S&F Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P' 150x150 mm incl CI cover complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) pipes of bore 110mm single socketed in any length with rubber ring joints laid in floors complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) pipes of bore 75mm single socketed in any length with rubber ring joints fixed to walls with stack clapms and fixed with nut and bolts complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) branch piece, single (single Y)/T equal or unequal with access door of any radius 110mm bore complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) bends with access door any radius of bore 75 mm complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) branch piece, single (single Y)/T equal or unequal with access door of any radius 75mm bore complete all as specified and directed.

S&F Pillar taps swan neck type 15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-110gms) complete all as specified and directed by Engr-in-Charge

S & F in repair for Vitreous China Urinal, half stall type, white (excluding flushing cistern, flush pipe ) but including CP brass urinal spreader with pvc connection 15mm size with PTMT nuts of length 450mm and HDPE waste pipe of 32mm bore and CP waste Coupling complete all as specified and directed by Engr-in-Charge.

Dismantling ceiling boards,fibre pulb insulation etc or insulation boards/slabs/blankets,any thickness, including cover and except MS Grid complete all as specified and directed by Engr-in-Charge

S&F false ceiling boards of Fibre Cement Designer tile white painted (High Pressure Steam Cured) of 4mm thickness (as per IS-14862) of size 1220mmx1220mm/1195mmX595mm/1220mmX610mm and any one of the design (occeanic , lake & hill, cascade or electra) fixed with screws over existing metal grid including required cutting/making opening for services like fixed over existing grid inluding necessary scaffolding etc and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engr-in-charge. Make-Everest/Visakha

S&F false ceiling with fibre cement designer tile white painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.

S&F mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel, flat sections and MS flats including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O complete all as specified and directed by Engr-in-Charge

M&L for 10mm thk rendering in cm 1:3 on roof surface,finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge

M&L for applying bituminous primer on roof surface @0.40ltr/sqm and applying one coat of semi hot blown bitumen of grade 85/[email protected]/sqm and there after supply and laying 3mm thk polymeric water proofing membrane,five layered,weight of not less then 3kgper sqm with center layer core of 90micron high moluculer density polyethylene film and bonded completely to the surface with overlapof 10cms(overlaps to be thermo fused by flame)followed by another coat of semi hot blown bitumen of 85/25 grade [email protected]/sqm all as per specified and directed.note : water proofing tretment will be done by IWL or through a specialized agency which will further have to give a five years warrenty complete all as specified and directed by Engr-in-Charge

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut in any sizes complete all as specified and directed by Engr-in-Charge

Dismantling plain or corrugated steel sheeting, any gauge thickness,including nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa and AZ-150 top coating as in roof covering/cladding to wall, fixed with self tapping screws. complete all as specified and directed by Engr-in-Charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

Taking down carefully point wiring copper/aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regtulators sockets etc to be measured and paid for separately removing materials to store for keeping of safe custody and making good the disturbed surfaces complete all as specified and as directed.

M&L point wiring with 1.5sqmm PVC insulated unsheathed FRLS cable with multistaranded copper conductor anodised sunken boxs in and incl non metallic rigid PVC grade ISI marked PVC surface conduit wiring with vailed C/ML No with all accessories for one light/fan/bell point controlled by one switch with thickness not less than 1.25mm MS terminal boxes concealed on wall with and including 3mm thick laminated backlite sheet including 1.5sqmm PVC insulated unsheathed FRLS cable with multistranded copper conductor continuous earth wire connected to common earth and duly complete all as directed by Engineer-in-charge..

All as per item No 145 above but for one 3/5 pin socket 5 Amp on same board, with cable1.5sqmm size.

All as per item No 145 above but for one 3/5 pin socket 5 Amp on independent board with cable1.5sqmm size.

All as per item No 145 above but for 3 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 Pin, 5 Amp flush type universal complete all as specified and directed by Engr-in-Charge

S&F in switch socket combination 2 in 1, 3 Pin, 5 and 15 Amp flush type universal complete all as specified and directed by Engr-in-Charge

S&F socket outlet 2 in 1, 3 Pin, 5 Amp flush type universal complete all as specified and directed by Engr-in-Charge

S&F in switch 5 Amps flush type 230 Volts , AC complete complete all as specified and directed by Engr-in-Charge

S&F of electronic step type regulator of capacity 240 volts flush type complete all as specified and directed by Engr-in-Charge

Supply and fixing modular socket 6 /16 Amps 2/3 pin flush type complete.

Supply and fixing modular switch single pole one way 16 Amps 1 module complete all as specified and directed

Supply and fixing modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.

Supply and fixing modular switch single pole one way 06 Amps 1 module complete all as specified and directed

Supply and fixing modular electronic fan regulator, step type, two module 120 watt 230 volt and making all necessary connections complete all as specified and directed.

S&F ceiling rose, surface backlite, 65x50mm, three terminals complete all as specified and directed by Engr-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture 05 Watt with extruded polycarbonate, environmental friendly, energy efficient ready to use pack including taking down old US tube light fitting 1x36W and taken in schedule of credit all as specified and as directed by engineer incharge of Make : Havells Cat No : LHEXBTP7IN1W005 or equivallent make of /CG/BAJAJ as sample approved by Accepting Officer

M&L for submain wiring with 2X6.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement including taking down old us submain wiringand direction by EIC, all accessories complete all as specified and directed.

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed by Engr-in-Charge

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 8 ways. complete all as specified and directed by Engr-in-Charge

S&F 'C' series SPN MCB 40 to 63Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc. complete all as specified and directed by Engr-in-Charge

S&F 'C' series SP MCB 06 to 32 Amps 240V ,50Hz,10kA suitable for lighting and other domestic loads incl all termnials, fitting etc complete all as specified and directed by Engr-in-Charge

S&F Slim linear LED lighting fixture 20 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 1x36W and taken in schedule of credit all as per the direction of Engr-in-Charge. -Make model of Havells cat No LHEXCEP7UN1W020 or equilent to CG/ syska CAT No SSK ALB 20W as sample approved by Accepting Officer

S&F LED light fitting PLUTO NEO PANEL 2x2 PLR 34 watt LED 857S environmental friendly , new generation , aesthetically designed ,ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for armstrong /grid /ceiling all as spesified and directed by Engr-in-charge Engr-in-Charge. Make -Make model of Havells cat No 840S or equilent to CG/ syska CAT No SSK-FP- 6060 as sample approved by Accepting Officer

S&F security (street) light fitting 25 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light completet including taking down old US light fitting of any type /size and taken in schedule of creditall as per direction of Engr-in-Charge. Make:SYSKA Cat no SSK-ST-25W(S) or equivalent in wipro cat No Havells/Wipro as sample approved by Accepting Officer

Supply and lay XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and directed by Engr-in-Charge

Supply and lay XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and directed by Engr-in-Charge

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as specified and directed by Engr-in-Charge

M&L GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia complete all as specified and directed by Engr-in-Charge

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- (a) Test point GI wire 4mm dia (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

Earth continuity conductor or main earhing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire .

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by engineer in charge.

M&L for repair of ceiling fan 1200mm sweep of any make obtained from above item, oiling, greasing cleaning slot, over hauling & replacement of defective nut bolts washer etc including painting. If as per site requirement fan will be found burnt rewinding will be provide by the contractor as per unit quoted rate all as specified and directed by Engr-in-charge.

Hanging /fixing only ceiling fan/Exhuast fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item no 186 above.

S&F for onload change over switch63 Amp with side handle in sheet enclosure suitable for single phase double pole 240Volts of Make Havells (Cat No- IHBFDE0063 (240V) or equivalent to Legrand/L&T/C&S all as specified and as directed by engineer in charge.

Supply and fix in repair sheet metal enclosure double door single pole and neutral 240 Volts for DB's when MCBs to be used 4 way with 200 amp rated bus bar with IP-43 protection. Make Legrand(Ekinoxe)/Schiender(Acti-9)/Siemens(Betagard-8GB32) complete all as directed by Engr-in-Charge.

Supply and fixing Heavy duty turbo force single phase Exhaust fans PVC VENTIL AIR DXZ WHITE of 150mm sweep complete including fixing exhuast fan with grouting of nut & bolts complete all as as specified and directed by Engr-in-charge.

Supply and install geyser 50 Ltrs capacity Vertical type BEE5 star rating suitable to operate in Single phase AC supply,230 volts 50 Hz including suitable size heavy duty Pvc connection hot & cold and grouting fashner with suitable size on the wall as per site requirment all as specified and directed by EIC. Make Bajaj Calenta / Racold.

Material and labour for PVC Hot and cold pipe with Check nuts and washer 600 mm long all as directed

Supply and hanging ceiling fan of 1200 mm sweep, white in colour , of including all electric connection, provn of hanging arragement and testing complete Make : Havells cat No : ES-50 Premium/Standard model- Breezer metalic finish pearl white /Bajaj Leatrim all as specified and directed by Engr-in-charge.

Supply and fix on load change over switch 4 pole 415 V AC, 50 Hz in sheet metal enclosure TPN of capacity 63 Amp all as specified and directed by engineer in charge.

S&F Tubo force Aircirculators fan AC Single phase 230/240Volts of size 400mm sweep complete all as specified and as directed by engineer in charge.

M & L for replacement of DB0Xx MCB protected socket with sheet steel enclosure complete WITH MCB SP 25Amp all as specified and as directed by engineer in charge.

S & F sheet metal TPN DBs - DPX3 160 MCCB DBs 4 way (DPX3 160+ 12) with metal door 415 volts grade IP 43 Protection Grade fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge

S & F and connecting with necessary copper lugs DPX3 thermal magnetic MCCB 4 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge

S&F in replacement E-Lite LED Curve lighting fixture 12 watt LED batten,T5 with full base of extruded Aluminium body environmental friendly, energy efficient ready to use pack with isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old unserviceable tube light fitting 1x 18 watt from the site reuse to measured seprately or disposal by credit all as per the direction of Engr-in-Charge. Make -Havells as per ordering code in wipro or C&S, Syska cat No SSK-T5-12w or equivalent model of Bajaj/Philips//CG as sample approved by Accepting Officer

Supply and fixing ventilating fan of 150 mm complete with louver and mounting assembly including fixing exhuast fan with grouting of nut & bolts complete making holes for mounting thed same all as as specified and directed by Engr-in-charge.