Implement of safe drinking water point with soak pit in front of Nakkati bhitor kuthi waqtiya masjid at nakkati mouza JL no-232booth no-118 under Haribhanga Gram Panchayat

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)

Single brick flat soling of picked jhama brick including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Cement concrete with 30 mm down graded shingles excluding shuttering. In ground floor.a. 6:3:1 proportion.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. b. River bazree.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at inter-section, complete as per drawing and direction.

Hire and labour charge for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, columns, lintels curved or staight including fitting fixing and striking out after complection of works. (upto roof of ground floor)

Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. a) for depth up to 150.00m. for 50mm. dia. tube well top enlargement of 100mm dia.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. 50mm dia boring etc

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes i) 50mm dia (internal)

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes ii) 100mm dia (internal)

Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications. 50 mm dia.

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (i) 40 mm dia.

Supplying of longscrew (150 mm. long) of TATA make with sockets (TATA make) and jamnut. (i) 40 mm dia.

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer e) 1000 litre capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing heavy type bell mouth reducing socket. (i) 50 mm X 100 mm

Supplying,fitting and fixing check valve (horizontal) G.M. tested to 21 kg per sq. cm. (i) 15 mm

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. a) For Exposed Work (ii) CPVC Pipes Class-2,SDR-13.5 (iii) 25 mm. dia.

Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make , spray painted and tested and to 21 kg per sq.cm. 15 mm.

(b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.

Supplying, fixing commissioning and testing solar voltaic Module 250 WP 40V on existing iron frame structure each 156 mm Monocrystalline silicon Solar cells laminated between of Ethyline Vinyl Acilate (EVA) and high transmissivily 3mm. Tempered glass. Confirming to IEC 61215(Revised) specification or equivalent National of internationalstandards. The power output of the module under STC Should be minimum of 250W. The operating voltage corresponding to the power output mentioned above should be at least 57.0 Volts. The terminal box IP 65 protection level on the module should have a provision for opening or replacing the module.

Supplying, fitting and fixing & Installation of Iron Removing Filter Plant Capacity 1500 LPH IR Media Filter. Working - Downilow Max Flow Rate - 3m3/hr working pressure- 1-3 kg/cm2 Size- 14'' x 65'' Make Pentair (BIS Standards & Including 1 year warranty )

Supplying and fixing round 2-core 4 sq-mm PVC multi core FR wire for aray connecting.

Supplying and fixing MC4 connector for panel loop

Connecting the all equlpment to earth busbar including G.I. (Hot Dip) wire of size as below on wall floor ……… as required and making connection to equipment with bolts , nuts, washers cable lugs as required and mending good damages No. 4 SWG

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.

Providing and fixing conductor made of 25mm dia. 300mm long copper tube having single prong at top with 85 mm dia. 3 mm thick copper base plate including holes etc. complete as required.

Supply installation testing & lowering of 1.0 HP oil Solar submersible pump motor set complete having suitable discharge as per yeild test of well. Submersible cable of 30 mtr. 3-core 2.50 sq-mm cable with MOC bar chart and necessary control panel and starter asper manufacturer specification.

Add GST

Add labour cess