27/E.U.D.C.-Talkatora/2024-25

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

11/0.4 K.V. 250 K.V.A. Transformer.

S.T. Pole 9/11 Mtr. Long.

P.C.C. Pole 8.5 Mtr. Long.

11 K.V. 3X185 Sq.mm. XLPE Cable.

ABC (3X120+1X95+1X16 Sq.mm.)

L.T. 3.5X400 Sq.mm. Cable.

11 K.V. O/D Cable Jointing kit (3X185 Sq.mm.)

11 K.V. I/D Cable Jointing kit (3X185 Sq.mm.)

11 K.V. Pin Insulator.

T-Off Channel 125X65 mm. 3200 mm. (10.70 Kg./M)

Top Channel 125X65 mm. 3200 mm. (10.70 Kg./M)

Dropper Channel.

L.T. incoming panel with metering equipment and fixing arrangements (LS)

Danger Board,Number Plate with clamp,Nuts & Bolt.

Stay set complete.

G.I. Pipe 6" dia.

11 K.V. TPMO with fixing clamp.

11 K.V. two way RMU 1000 KVA up to 3000 KVA.

33 K.V. Line Isolator 800 A.

33 K.V. Bus Isolator 800 A.

Battery set 24 Volt.

Battery Charger 24 Volt.

Fabrication, Erection of Double Pole Structure on 11 mtr. long STP with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 nos., Dropper Channel 100X50 mm. (2028 mm long) 01 Nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Erection of Single Pole structure on 11 mtr. PCC with fixing of necessary clamps and other accessories required for stringing along with plinthing, grouting & earthing of STP with cement, sand and brick ballast in the ratio 1:4:8 (0.9 Cu.Mtr each) upto the height of 300 mm. from the ground level.

Fabrication and erection of wire mesh fencing 02 Mtr. height with a gate and with retaining wall including grouting of fabricated M.S. Angle 65X65X6 mm. support (05 Nos. in a Sub-Station). Painting of fencing/support with all material as per specification/drawing complete in all respect.

Placing of 250 K.V.A. healthy Transformer from out side of yard to plinth with the help of crain and T & P.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

Laying of 11 K.V. XLPE Cable 3X180 mm2 in single circuit underground as per digging of earth pit of Size 0.60x0.90 with provision of Sand filling and Cover with side brick and Top with Stone pad. (11 K.V. XLPE Cable will be provided by deptt. only)

Lay down the LT PVC cable of size 3.5X400 Sq.mm. for making the both side, connection of Transformer after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center.

Construction of Plinth for RMU 03 way/04 way as per approval drawing (All material will be provided by contractor)

Earthing of 11/0.4 K.V Distribution Transformer/RMU bodyneutral by way of boring and lowering of ISI marked two Nos. G.I pipe 1.5" dia 20 m deep from the ground level with solid cone at the lower end of G.I pipe. One end of G.I strip of size 50X6 mm. will be connected with neutral and body of the Transformer & other end will be clamped & welded with G.I Pipe as per UPPCL norms (All the material will be arranged by contractor at their own cost.)

Supply and fixing of L-piece for 250 K.V.A. Transformer.

Installation of 11 K.V. TPMO with Polymer insulator & Fixing clamp. ( TPMO provided by department)

Installation of L.T. incoming panel with metering equipment & fixing arrangments(LS)

Erection and commissioning of 11 K.V. RMU on constructed plinth and connecting with system including completion of termination/Jointing kits testing of its and etc complete in all respect.

Installation of Line Isolators: Assembling and installation of Line isolator on the isolator structure adjusting of opening mechanis in proper alignment so as to ensure smooth operation of the same. In case of line isolator proper operation of earth links shall also be ensured. The work includes fabrication & proper connection with earthmat/earthing by G.I. earth strip 50x6mm proper fixing if required. (All decentralised materials to be provided by Contractor).

Installation of Bus Isolators: Assembling and installation of bus isolator on the isolator structure adjusting of opening mechanis in proper alignment so as to ensure smooth operation of the same. In case of line isolator proper operation of earth links shall also be ensured. The work includes fabrication & proper connection with earthmat/earthing by G.I. earth strip 50x6mm proper fixing if required. (All decentralised materials to be provided by Contractor).

Installation of Exide or equivalent make 24 Volt, 180 AH Battery set tabular plate.

Installation of Exide make 24 Volt, 180 AH Battery set tabular plate.

Hoisting of 11 K.V. XLPE cable 3X185 mm2. along with 4" dia G.I. Pipe 03 meter long with required clamp etc. (All material provided by contractor)

Note :- 1- All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2- One carriage including loading/unloading from dump site to pit site is included in scope of work. 3- During execution of work all risk will be of the contractor. 4- Contractor will provide all T & P, vehicle and man power. 5- All the old and used material should be taken on book. 6- The quantity may be vary ±10%. 7- GST will be paid extra as legally applicable. 8-The work should be carried out under Additional Bussiness Plan 2024-25.

SYED TRADERS (BID ID -4775230)

SINGH ENTERPRISES (BID ID -4775705)