Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC RAJKOT ROAD AIR FORCE STATION HALWARA 141106 PUNJAB | HALWARA | LUDHIANA | PUNJAB | 141106 | L1 | Accepted-AOC Due to lowest accepted | |
| 2 | L2₹3.4 L+₹34,790 (11.2%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹4.0 L+₹89,805 (29.0%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹4.1 L+₹1.1 L (34.1%)Rejected-Finance H NO 21666 POWER HOUSE ROAD STREET NO 9 BATHINDA PB 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Other than lowest | |
| 5 | Rejected-Technical | - | Rejected-Technical previous works not yet completed. Show cause notice served. |
Tender Value
₹5 L
EMD Value
₹10,000
Closing Date
14 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Ludhiana
REPAIR /MAINT TO GEYSERS AND MISC E/M ITEMS AT BADDOWAL and MOGA UNDER GE LUDHIANA
2022_MES_552715_1
GE/LDH-48/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Baddowal and Moga
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹10,000
Yes
9 Nov 2022
17 Sept 2022
15 Oct 2022
17 Sept 2022
14 Oct 2022
1 Oct 2022
17 Sept 2022 - 30 Sept 2022
Amount
Taking down geyser of capacity 25 litre after disconnecting water supply and electric connection and re-connecting the same after repairs complete all as specified & directed by Engineer-in-charge.
M&L for opening electric geyser of capacity 25 litre, taking out the inner tank, glass wool, geyser assembly, heating element and thermostat etc., cleaning, painting the complete geyser using iron brush/ iron rod and taking out the dirt & other deposits, re-assembling the geyser after replacing the defective parts and refilling the glass wool etc. complete all as specified & directed by Engineer-in-charge.
Supply and replacement of heating element single phase 230 volts with rubber gasket; push type round shape of capacity 2 KW all as specified & directed by Engineer-in-charge.
All as per item No. 3 here-in-before above but element of triangular shape of capacity 2.0 KW.
Supply and replacement of thermostat single phase 230 volts with setting range 0° C to 85° C all as specified & directed by Engineer-in-charge.
Supply and replacement of geyser assembly having copper base and piping with 9/8/6 holes all as specified & directed by Engineer-in-charge.
Supply and replacement of worn out/ leaking inner steel/iron body water tank for 25 litre capacity geyser all as specified & directed by Engineer-in-charge.
Supply and replacement of base plate with indicator lamp(Red and green) in two parts of size all as specified & directed by Engineer-in-charge.
Supply and replacement of air/pressure release valve all as specified & directed by Engineer-in-charge.
Supply and filling in glass wool 50 mm thick for packing between inner & outer geyser assembly all as specified & directed by Engineer-in-charge.
Supply and replacement of old/ rusted and worn out geyser outer cover for 25 litre capacity geyser all as specified & directed by Engineer-in-charge.
Supply and replacement of PVC connection 15mm size with brass nuts of length 750 mm all as specified and directed by Engineer-in-charge.
Supply & fixing in replacement bib tap cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
Supply & fixing in replacement stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for unions suitable for size 15mm bore complete all as specified & directed by Engineer-in-charge.
Supply & fixing for steel water tubes of size 25mm bore (medium grade) galvanvised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete, all as specified & directed by Engineer-in-charge.
Supply & fixing for steel water tubes of size 20mm bore (medium grade) galvanvised with all fittings and fixed complete to walls and ceiling or laid in floors/ concealed in walls complete all as specified & directed by Engineer-in-charge.
Taking down Exhaust fan 250/300/380/450 mm sweep of any make/ model and repairing by removing burnt / heated copper winding from stater and rewinding the stater coils with super enamelled copper wire of suitable size including providing insulation material, varnishing, painting and provision of cotton tape, re-assembling and testing including replacement of spring washer and two core flexible wire of size 23/.0076 with copper conductor of suitable length from fan terminal to ceiling rose and refixing in same or other position as directed complete, all as specified & directed by Engineer-in-charge.
Supply and replacement of unserviceable ball bearings of exhaust fan 250 -450 mm sweep complete, all as specified & directed by Engineer-in-charge. Make: NBC/ SKF.
Supply and replacement of gun metal bush for exhaust fan 250 -450 mm sweep including lath work etc complete, all as specified & directed by Engineer-in-charge.
Supply and replacement of Capacitor 4.0 mfd complete, all as specified & directed by Engineer-in-charge.
M & L in replacement sub main wiring complete with 2 runs of 2.5 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 1.5 Sqmm single core PVC insulated FR cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm or higher dia non metallic rigid PVC conduit and conduit accessories concealed in wall/Ceiling etc all as specified and as directed Note : 2 runs of 1.5 sqmm, 1 run of 1.5 sqmm earth conductor and 1 run of PVC conduit shall be measured as one unit length complete, all as specified & directed by Engineer-in-charge.
Supply and fix for non return valve ( NRV) GM alloy screwed of size 15 mm bore complete, all as specified & directed by Engineer-in-charge. Make : BIR/ VARUNA/SANT/VENUS/Zoloto
S & F for PVC insulated & unsheathed stranded copper conductor cable 1100 volts grade of size 2.5 sqmm 3 core in 20 mm bore flexible pvc conduit with holding clip by conforming to IS 694 complete, all as specified & directed by Engineer-in-charge.
Supply only socket 15 A, 5 pin flush type complete, all as specified & directed by Engineer-in-charge.
Supply and fix in replacement of switch 15 Amps flush type complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of of plug top 15 amps three pin complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of of plug top 5 amps three pin complete all as specified and directed by Engineer-in-Charge.
M & L in replacement for galvanvised steel tubing 15mm dia medium grade (ISI marked) including fitting and fixing arrangements on wall/ceiling/roof etc complete all as specified and directed .
Supply and fixnig in repalcement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 2 core all as specifieda and as directed.
Supply and fixnig in repalcement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core all as specifieda and as directed.
Supply only L hook fastener size 10 mm dia and 10 cm long with connected washers fixing on wall for hanging of geyser all as specified and as directed.
S&F for MCB 6 to 32 Amp single pole ,240 V, 10 KA, 'B' Series all as specified and as directed by Engr-in-Charge.
S&F for Exhaust fan blades including nuts and bolts any size any type as specified and directed.
S&F for MCB SPN 20 Amp single pole ,240 V, 10 KA, 'B' Series all as specified and as directed by Engr-in-Charge.
S & F for FRLS PVC insulated & unsheathed stranded copper conductor single core cable 1100 volts grade of size 1.5 sqmm conforming to IS 694 complete all specified and directed.
Supply and fixing in replacement of PVC flexible copper cable 1.5 sqmm 3 core upto 3.0 metre length complete all specified and directed.
S & F for FRLS PVC insulated & unsheathed stranded copper conductor single core cable 1100 volts grade of size 2.5 sqmm conforming to IS 694complete all specified and directed.
S & F for FRLS PVC insulated & unsheathed stranded copper conductor single core cable 1100 volts grade of size 4 sqmm conforming to IS 694 complete all specified and directed.
shri ram enterprises
JASSI TRADERS
SUNRISE ENGINEERS AND CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .