IMPROVEMENT PATODA TO DEVLA ROAD VR.NO.72 K.00 4/00 Actual Km. NO.0/100 To 0/500/1/200 CD. WORK TO AMBAJOGAI

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. D.LNO.2.09 P.NO.23

Excavation for catch/side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. D.I.NO.2.18P.ΝΟ.24

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)D I NO.24.01 P NO.175

Providing and laying in situ / ready mix M20 CC of trap/ granite/quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/pan mixer with fine agreegates of required specifications (VSI sand finely washed etc) DI NO.14.39 P NO.96

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm size chips compacting with three wheel static roller having weight 8 to 10 MT to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) D.L.NO.3.35aP.NO.31

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry/Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) D.I.NO.3.31P.NO.30

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime /tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive atrates) D.L.NO.4.12P.NO.36

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) D.L.NO.4.01P.NO.35

Providing and fixing RCC 200 meter Stone in CC 1:4:8 metre stones as per I.R.C. standard including fixing in standard size block including curing, painting lettering etc. complete. D.I.NO.6.02P.NO.46

Supplying hard murum/kankar at the road site, including conveying and stacking complete c D.L.NO.2.29aP.NO.25

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete. D.I.NO.2.30P.NO.25

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.D.I.NO.2.31P.NO.25