NIT No-16 EE (SDW) II/ (21-22) Item No.02

Providing /laying of different size LT cables with allied works from main control room to ACE (P)-3 office and sewer dewatering pump house at staff quarters of SDW Okhla by carrying out following works including all the required works, materials, arrangements tools & tackles workmanship, safety arrangements & equipments as per NHRC guidelines etc. and as per site requirement, remodeling all the damages up to standard if occurred any complete in all respect satisfactorily. Dismantling the existing damaged cables from the main control room to ACE office and pump house one by one without complete shutdown of the office and pump house as per instructions of engineer-in-charge with all safety precautions and tool & tackles at the site like cutter, electric gloves, electric shock proof shoes etc. Removing the damaged cables etc from the site and placing them at a safe site/old material store as per instructions of JE-in charge.

Supply of PVC/XLPE insulated PVC inner sheathed armoured aluminum conductor cable of size 50 sqmm 3.5 core, tested upto and including 1100 volts grade as per IS:7098/part-I/1988. Make:- Grandlay/Universal/ICC/Gloster

Supply of PVC/XLPE insulated PVC inner sheathed armoured aluminum conductor cable of size 35 sqmm 3.5 core, tested upto and including 1100 volts grade as per IS:7098/part-I/1988. Make:- Grandlay/Universal/ICC/Gloster

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm (DSR 7.1.2)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35Sq. Mm. (DSR 7.1.1)

Providing/fixing of main switch 3pole, 32Amp with provising of voltmeter and ammeter and at the locations instructed by engineer-in-charge. Make: Havells/C&S or any DJB approved make.

Supplying and making end termination with brass compression gland/aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. 3½ X 50 sq. mm. (DSR 7.1.22)

Supplying and making end termination with aluminum lugs, Insulation tapes etc as required for following size of PVC insulated and PVC sheathed / XLPE aluminum conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm. (DSR 7.1.21)

Testing & commissioning of the all installed cables, joints etc.nas per satisfaction of the engineer in-charge on Load. The Job also includes that part of work/items which are necessary to make the site operational but not taken into the estimate.

P.K. Electricals

HARI ELECTRICAL CO.

HYDROCON ENGINEERS