Attending the faults of Electrical Installations and accessories in Telephone Exchanges in OA Meerut.

(SH-I Labour Charges for attending the fault) (1) Providing of one Semi-Skilled (Electrician) and one un-skilled labour for attending faults on call basis without material for rectification of fault of non functioning of the E.I, Compound Light, power supply from meter to panel, Distribution board, changeover switch i/c removing the fault, testing etc. complete as reqd. (a) The semi-skilled person (Electrician) should be able to work on electrical components, such as Electrical wiring, testing, circuit breakers, Distribution board and Electrical panel work. (b) At least 2 years' experience as an Electrical Technician. (c ) General duty hours from 10:00 am to 05:30 pm but in emergency the maintenance staff shall be available at any time. (d) The sitting arrangement and telephone for the staff engaged by the agency should be arranged by the firm at his own cost. The Enquiry office space & electricity shall be made available by the Department free of cost. (e) Replacement of defective/damaged material shall be provided separately. Recovered item from replacement shall be property of contractor.

(2) Transportation charges for attending faults from enquiry office to site and site to Enquiry office etc. complete as reqd. (The journey shall be performed by two wheeler /Motor cycle /scooter, the vehicle shall be arranged by agency) (a) Within 25 Kmtrs

2(b)Within 50 Kmtrs

(SH-II Replacement of Electrical Installation and accessories) Replacement of following electrical, mechanical component and accessories etc. complete as required. (1) Tube light 36 W (M/s Philips/Bajaj/Crompton Make)

2) Choke copper for 36 W Tube light (Electronic)

3) Starter for 20/40/80 W for tube light

4) LED Tube light 20 W for 4 fit fitting

5) 5/6 Amps switch piano type (Anchor Make)

6) 3 Pin 5/6 A socket outlet piano type (Anchor Make)

7) 15/16 Amps switch piano type (Anchor Make)

8) 6 Pin 15/16 A socket outlet piano type (Anchor Make)

9) Fan Regulator ISI marked

10) 5/6 Amps switch modular type (Anchor Roma Make)

11) 3 Pin 5/6 A socket outlet modular type (Anchor Roma Make)

12) 15/16 Amps switch modular type (Anchor Roma Make)

13) 6 Pin 15/16 A socket outlet modular type (Anchor Roma Make)

14) Stepped typoe Electronic fan regulator (modular) (Anchor Roma Make)

15) Call bell/buzzer suitable for D.C./A.C. single phase, 230 volts

16) 18 Watt LED Bulb (M/s Crompton/ Philips make)

17) 20 Watt LED Bulb (M/s Crompton/ Philips make)

18) 23 Watt LED Bulb (M/s Crompton/ Philips make)

19) 40 Watt LED Bulb (M/s Crompton/ Philips make)

20) Energy eificient 30 Watt LED Street Lights fitting (M/s Crompton Model Astra NEO LSTS-30-CDL-M / SS make)

21) Energy eificient 40 Watt LED Street Lights fitting (M/s Crompton Model Freedom NEO LSTS-40-CDL-M / SS make)

22) Brass Batten holder

23) Dome/ Cover for Gate Light Fitting (M/s Philips, S.S. make)

24) Water proof FRP/SMC Single pic.molded box (M/s Sintex make)

25) 5-32 Amp SP MCB 'C' Series (M/s Legrand / S.S make)

26) 5-32 Amp DP MCB 'C' Series (M/s Legrand / S.S make)

27) 5-32 Amp TP MCB 'C' Series (M/s Legrand / S.S make)

28) 63 Amp Double Pole Isolater (M/s Legrand / S.S make)

29) 63 Amp Four Pole Isolater (M/s Legrand / S.S make)

30) 2 Way DP Enclosure (M/s Legrand / S.S make)

31) 63 Amp 4 pole 'ON LOAD' changeover switch with sheet steel enciosure (M/s HPL / S.S make)

32) 63 Amp 4 pole 'ON LOAD' changeover switch without sheet steel enciosure (M/s HPL make).

33) 100 Amp 4 pole 'ON LOAD' changeover switch with sheet steel enciosure (M/s HPL make)

34) 100 Amp 4 pole 'ON LOAD' changeover switch without sheet steel enciosure (M/s HPL make)

35) 63 Amp TPN, SDFU with HRC fuse (M/s L&T make)

36) 96 mm x 96 mm Digital Voltmeter, (0-500) V (M/s A.E./ Rishabh/ HPL make)

37) 96 mm x 96 mm Digital Ammeter, (0-200) Amp (M/s A.E./ Rishabh/ HPL make)

38) LED incication lamp Red/ Yellow

39) LED incication lamp Blue

40) 100 Amp 4 Pole MCCB, 25 KA breaking capacity, release range (80-100A) [M/s L&T DN0-100C make]

41) 125 Amp 4 Pole MCCB, 36 KA breaking capacity, release range (100-125A) [M/s L&T DN0-125D make]

42) 63 Amp Porocilin Kitkat fuse carrier & Base

43) 100 Amp Porocilin Kitkat fuse carrier & Base

44) HRC Fuse 5-32 Amp

45) Supplying and drawing/laying of following size FRLS PVC insulated copper conductor, single core multistrand wire/ cable in the existing conduit/surface/casing caping etc complete as reqd. (a) 3 x 1.5 Sqmm

45(b) 3 x 2.5 Sqmm

45(c ) 3 x 4.0 Sqmm

46) Supplying & Laying of following size PVC insulated PVC sheathed Al. conductor armored cable of 1.1 KV grade on surface/ wall etc. complete as required. (a) 2 x 6 Sq.mm

46(b) 4 x 16 Sq.mm

46(c ) 3 1/2 x 35 Sq.mm

47) Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade size not exceeding 35 Sqmm in the following manners :- (a) Direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

47(b) On Surface as required

47(c ) In the Existing RCC/HUME/METAL pipe as required

47(d) In the Existing masonry open duct as required.

48) Supplying & making end termination with brass compression gland and Alum. Lugs for following size PVC insulated and PVC sheathed/XLPE Alum. conductor cable of 1.1 KV grade as required. (a) 2 x 6 Sq.mm (19mm)

48(b) 4 x 16 Sq.mm (28 mm)

48(c ) 3 1/2 x 35 Sq.mm (32 mm)

(SH-III Rewinding work) 1.) Rewinding and assembling of following submersible pump motor with oil seal and including replacement of all necessary spares parts in motor and pump required as impleller, bushing etc for smooth functioning of submersible pump complete in all respect i/c dismantling and lowering of pump etc complete as reqd. (a) 1.0 HP

2.) Rewinding and overhauling of following exhaust fan replacement of bushes bearing shaft including capacitor etc. complete as required. (a) 9" Exhaust fan

2(b) 12" Exhaust fan

2(c ) 18" Exhaust fan

3.) Rewinding and overhauling of following ceiling fan including bushes, bearing, bearing shaft and capecitor etc. complete as required. (a) 48" Ceiling fan

3(b) 56" Ceiling fan

Harsh Electrical