Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC 2ND FLOOR SCO 17 HARMILAP NAGAR PHASE 1 DERABASSI PB | PATIALA | PUNJAB | 140401 | ₹41.9 L | L1 | Accepted-AOC in order |
| 2 | L2₹43.3 LRejected-Finance 241 SECTOR 7 PANCHKULA | ₹43.3 L | L2 | Rejected-Finance NOT IN ORDER |
Tender Value
₹44.5 L
EMD Value
₹89,050
Closing Date
30 Jan 2026, 12:00 pmClosed
Executive Engineer Roads Division No 1 MC Chd
Executive Engineer Roads Division No 1 MC Chd
Construction of pedestrian path opposite side of houses on V-5 road Sector 43 A and B as per Chandigarh master plan 2031 after dismantling existing damaged footpath and repair of footpath on houses side.
2026_MCC_90237_1
MCC/R1/2026/021
Open Tender
Civil Works
90 days
work
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,000
₹89,050
27 Apr 2026
23 Jan 2026
30 Jan 2026
23 Jan 2026
30 Jan 2026
23 Jan 2026
Taking out existing cement concrete PCC tile from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.DSR 16.82
Providing and fixing PCC kerbs of size 1’-0” x 1'-0” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes fixing in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. Length of finished kerb edging shall be measured for payment.
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost).
Providing and fixing PCC kerbs of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes fixing in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. Length of finished kerb edging shall be measured for payment.
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil. DSR 2.6.1
Preparation of sub grade including trenching rough dressing of soil, final dressing of earth to give level and camber, watering, rolling with a road roller and compaction of bed complete in all respect to the entire satisfaction of Engineer in Charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) DSR 4.1.10
Providing and fixing 100 x 100 x 75 mm cobble stone block of approved colour & shade ,hand cut and chisel dressed on top laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) DSR 4.1.2
Extra for providing and mixing hardening compound of approved quality as per manufacturer’s specification in cement concrete . DSR 16.44
Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. DSR 11.8
Laying old cement concrete PCC Tile of any design/ shape laid in required line, level, curvature, colour and pattern over 20mm thick compacted bed of cement sand mortar 1:4 including grouting the joints with cement mortar etc. all complete as per the direction of Engineer-in-charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 25.74 MB
BOQ_110362.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid