REPAIR TO STEEL FURNITURE AT AF STN UTARLAI

Amount

Repairs to Almirah large steel by taking out the following worn-out components without damaging the existing components and replacing the same with new componets all as per drawing Drg No: FD-84(M), 1031

S & F locks with duplicate keys & brass levers as per existing size/specification .

S & F handle Chromium plated, cast iron or malleable cast iron, cast type 120mm long fixed with bushes nuts and washers etc.

S & F Mild steel retainer clips suitable for fixing shelves complete all as specified.

S & F internal sliding system (8 ways) including locking form top to bottom.

M&L for one coat for synthetic enamel paint OG to the external steel surfaces after removing dust, grease / removal of dents& welding complete all as specified.

Repairs to Legs & Base Welding and replacing the old unservicable sheet including one coat of red oxide paint complete all as specified.

Repairs to Almirah med steel by taking out the following worn-out components without damaging the existing components and replacing the same with new componets all as per drawing Drg No: FD-84(M), 1032

S & F locks with duplicate keys & brass levers as per existing size/specification.

S & F handle Chromium plated, cast iron or malleable cast iron, cast type 120mm long fixed with bushes nuts and washers etc.

S&F Mild steel retainer clips suitable for fixing shelves complete all as specified.

S&F internal sliding system (8 ways) including locking form top to bottom complete all as specified.

M&L for one coat for synthetic enamel paint OG to the external steel surfaces after removing dust, grease / removal of dents & welding complete all as specified.

Repairs to Legs & Base Welding and replacing the old unservicable sheet including one coat of redoxide paint as directed.

Repairs to Bed Hard MAP with plywood top by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No: FD/E6/MAP/08 (R )

Removing unserviceable long rail Rectangular Pipe and replacing with new 25mm x 65mm mild steel rectangrlar pipe (18 Guage) complete all as specified.

Removing unserviceable Middle Support and replacing with new 25mmx25mm mild steel (18 gauge) 04 Nos equal distance pipe in line with bottom of 25x65 mm section complete all as specified.

Removing unserciveable Legs and frame of Head board and replacing with new 38mmx 38mm mild steel square pipe (18 gauge) complete all as specified.

Removing unserciveable Legs and frame of Foot board and replacing with new 38mmx 38mm mild steel square pipe (18 gauge) complete all as specified.

Removing unserciveable Foot Board and replacing with new 18mm thick both side pre laminated particle board with 4mm teak wood bidding all around shall be screwed to 18mm x18mm square pipes complete all as specified.

Removing unserciveable Head board and replacing with new 18mm thick both side pre laminated particle board with 4mm teak wood bidding all around shall be screwed to 18mm x18mm square pipes complete all as specified.

Removing old unservicable ply top and fixing new 12mm thick ISI marked Plywood BWR grade commerical of required size. all as specified and directed by Engineer-in-charge

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish complete all as specified.

Repairs to Charpoy IP MAP with plywood top by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No: FD/MAP/04

Removing unserviceable long rail Rectangular Pipe and replacing with new 25mmx 65mm mild steel rectangrlar pipe (18 Guage) complete all as specified.

Removing unserviceable short rail Rectangular Pipe and replacing with new 25mmx 65mm mild steel rectangrlar pipe (18 Guage) complete all as specified.

Removing unserviceable stiffiner and replacing with new stiffiner 25mmx25mm mild steel (18 gauge) complete all as specified.

Removing unserviceable legs and replacing with new legs 32x32mm mild steel (16G) complete all as specified.

Removing unserviceable MS cleat and replacing with new MS cleat 25x25x6mm duly welded with frame complete all as specified.

Removing old unservicable ply top and fixing new 12mm thick ISI marked Plywood BWR grade commerical as per existing size complete all as specified .

M&L for painting to the external steel surfaces duly cleaning the surface with emery paper providing one coat of synthetic enamel black paint glossy finish & wherever is applying two coats paint over a coat of red oxide complete all as specified.

Repairs to table 900x600x760mm with drawer steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-1008

Removing unserviceable steel drawers and replacing the same with new drawers, which shall be made out of 1.6mm thick M.S. sheet complete all as specified.

Removing unserviceable legs and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components complete all as specified.

Removing unserviceable long rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components complete all as specified.

Removing unserviceable short rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components complete all as specified.

Removing unserviceable Stiffners and replacing stiffners with 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable locks and replacing the same with new lock, made out of steel body with six brass levers with duplicate keys

Removing unserviceable Hard rubber toe and replacing the same with new Hard rubber toe

Removing old unservicable table top and fixing new 18/19mm thick ISI marked Pre-laminated particle board one side teak face as per existing size . Complete all as specified .

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish complete all as specified.

Repairs to table 900x600x760mm without drawer steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-1009

Removing unserviceable legs and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable long rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable short rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable Stiffners and replacing stiffners with 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable Hard rubber toe and replacing the same with new Hard rubber toe

Removing old unservicable table top and fixing new 18/19mm thick ISI mark Pre-laminated particle board one side teak face as per existing size . Complete all as specified .

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish & where necessary applying two coats paint over a coat of red oxide complete all as specified.

Repairs to table 900x900x760mm steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-1009

Removing unserviceable legs and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable long rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable short rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable Hard rubber toe and replacing the same with new Hard rubber toe

Removing old unservicable table top and fixing new 18/19mm thick ISI mark Pre-laminated particle board one side teak face as per existing size . Complete all as specified .

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish complete all as specified.

Repairs to Chair CBB Steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No: FD-75 (M)

Removing unserviceable damage seat frame and replacing the same with new seat frame made by second class hard wood with canning (Godrej pattern)

Removing unserviceable damage back frame and replacing the same with new seat frame made by second class hard wood with canning (Godrej pattern)

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish complete all as specified.

Repairs to Chair visitor with arm /w/o arm by taking out the following worn out components without damaging the existing components and replacing the same with new componets all as directed by Engr-in-charge Drg No - TP,

Removing of unserviceable cushion with tapestry/leatherite cloth of seat & back and replacing the same with new cushion with tapestry/leatherite cloth including PVC lipping as approved

Repairs to chair revolving high/low back /chair computer, with arm including taking out the following worn out components without damaging the existing components and replacing the same with new components all as directed by Engr-in-charge. Drg No - TP.

Removing of unserviceable cushion with tapestry cloth/ Rexine of seat & backand replacing the same with new cushion with tapestry cloth/ Rexine including all around PVC lipping as approved by GE.

Removing unserviceable / damaged caster wheel and fixing new caster wheel as per sample approved

Remove unserviceable hand rest and supply and fixing new hand rest matching the old hand rest.

S & F new revolving cistern

S & F new base complete

Repairs to Chair writing (MAP) taking out the following worn out components without damaging the existing components and replacing the same with new components all as directed by Engr-in-charge drg No FD/E6/MAP/12

Removing of unserviceable Polyurethane foam and acrylic poly propylene and replacing with new Polyurethane foam shall be 50mm thick with density 50 to 55 KG per Cubic mtr as per approved colour.

Remove unserviceable hand rest and supply and fixing new hand rest matching the old hand rest.

Removing of unserviceable MS tubular frame and replacing with new Cantilever type powder coated MS tubular frame made out of 25mmx10mm section as per existing gauge/size complete all as specified.

Repairs to steel table office officer by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-84(M), 1002

Removing unserviceable steel drawers and replacing the same with new drawers which, shall be made out of 1 mm thick M.S. sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromium primer as directed by Engineer-in -Charge.

Removing unserviceable legs and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable long rails and replacing long rail 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable short rails and replacing short rail 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable Stiffners and replacing satiffiner 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable locks and replacing the same with new lock, made out of steel body with six brass levers with duplicate keys

Removing unserviceable Hard rubber toe and replacing the same with new Hard rubber toe

Removing old unservicable table top and fixing new 18/19mm thick ISI marked Pre-laminated particle board one side teak face as per existing size . Complete all as specified.

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish.

Repairs to steel table office clerk by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-Charge. Drg : FD-1004,

Removing unserviceable steel drawers and replacing the same with new drawers which, shall be made out of 1 mm thick M.S. sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide zinc chromium primer as directed by Engineer-in -Charge.

Removing unserviceable legs and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable long rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable short rails and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable Stiffners and replacing legs 25 mm square 16 gauge M.S. tubing and fixing the same by welding to the table in place of removed components

Removing unserviceable locks and replacing the same with new lock, made of steel body with six brass levers with duplicate keys

Removing unserviceable Hard rubber toe and replacing the same with new Hard rubber toe

Removing old unservicable table top and fixing new 18/19mm thick ISI mark Pre-laminated particle board one side teak face as per existing size. Complete all as specified .

M&L for painting to the external steel surfaces duly cleaning the surface with emery paper providing one coat of synthetic enamel black paint glossy finish.

Taking out the following worn out components of table dining OR's without damaging the existing component and replacing the same with new components made out of 25 mm square 16 guage M.S. tubing and fixing the same by welding to the table in place of removed components all as per drawing and directed by Engr-in-charge Drg:FD-165

Long rails

Short rails

Stiffners long

Stiffners short

Removing old unservicable table top and fixing new 18/19mm thick ISI marked Pre-laminated particle board one side teak face as per existing size. Complete all as specified .

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish.

Removing of damaged/ unserviceable Newar/canning from Chair Verandha and canning with 4 mm wide cane shall be used, canning shall be Godrej pattern all as per shown in drawing (colour of white / ivory) and all as directed by Engr-in-charge. Drg: FD-256

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel white paint glossy finish complete all as specified.

Repairs to Chair Verandah steel/Chair Verandah with PVC Seat by taking out the following worn-out components without damaging the existing components and replacing the same with new componets all as per drawing Drg No: FD/E6/MAP/11, FD - 256, FD/MAP- II/06

MS Flat

Welding at any point

Supply and fixing of PVC seat and back shall be of 4mm thick with weight not less than 1.85 kg /each and grooves 90 x 10 mm 10 Nos seat and back

M&L for painting to the external steel surfaces duly cleaning the surface with emery paper providing one coat of synthetic enamel black/white paint glossy finish.

Removing old unserviceable nylon newar from GI Charpoy and reweaving the same closely with new vergin nylon newar 50 / 55 mm width white colour Ist quality (as per sample approved by GE) the weight of nylon newar shall not be less than 1.5 Kg each charpoy, all as specified and directed by Engineer-in-Charge Drg : FD 220.

Removing old unserviceable plywood from GI Charpoy ply top and fixing with new 12mm thick plywood commercial BWR gde , all as specified and directed by Engineer-in-Charge Drg : FD 220.

Tightening of loose charpoy GI pipe complete with all respect and all as per directed by Engr-in-charge. Drg No. FD-220

Repairs to Chair CBA Steel by taking out the following worn out components without damaging the existing components and replacing the same with new components all as per drawing and as directed by Engr-in-charge. Drg No: FD-75 (M)

Removing unserviceable damage seat frame and replacing the same with new seat frame made out of second class hard wood with canning (Godrej pattern)

Removing unserviceable damage back frame and replacing the same with new back frame made out of second class hard wood with canning (Godrej pattern)

Removing unserviceable damage wooden handle and replacing the same with new second class hard wood handle duly black polished complete all as specified

M&L for painting to the external steel surfaces duly cleaning the old surfaces with emery paper providing one coat of synthetic enamel black paint glossy finish complete all as specified.

Vinayak Distributors

L.BHIMSEN

M/S CHANDER SHEKHAR

M/S Dharam Chand Lal Chand Jain

SK INDUSTRIES