REPAIR OF ROOFING SHEET, FALSE CEILING, JOINERY ITEM, STORM WATER DRAIN, CULVERT, DESILTING OF DRAINS AND REPLACEMENT OF SAND CUSHIONING AT AFS THANJAVUR

Amount

Dismantling of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, incl cover fillets.

S&F Aluminium snap grid false ceiling of standard aluminium section such as wall angle of size 38 x 25 x 2.4mm weighing 0.36 kg/rm main/cross ties of size 36.5 x 25 x 1.4mm weighing 0.24kg/rm grid size not exceeding 610 x 610mm suspended with 4mm dia GI wire at interwal not exceeding 600mm centre to centre for cross and main tees fixed to roof slab / roof truss fixed with suitable size hooks of MS and fastening bolts etc include board classic 4mm thick oceanic sheet of size not exceeding 610 x 610mm fixed in ceiling with clips to snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Dismantling Asbestos cement (corrugated , semicorrugated,etc.) sheets in roof covering.

M&L for 6mm thick asbestos cement corrugated sheets in roof fixed with J bolts.

M&L for 6mm thick asbestos cement serrated ridge for corrugated sheets fixed with 'J' bolts.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.45 to 0.50mm thick of any colour having tensile strength 550mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45 to 0.50mm thick of any colour having tensile strength 550mpa as in ridges, fixed with self tapping screws all as specified and as directed.

S&F in repair 100mm size Butt Hinges, medium weight, cold rolled mild steel.

S&F for 100mm size Butt Hinges, medium weight, cold rolled mild steel.

S&F in repair 200mm long Aluminium anodised barrel tower bolts of extruded Section.

S&F for 200mm long Aluminium anodised barrel tower bolts of extruded Section.

S&F in repair 150mm size Aluminium handles, cast type, anodised.

S&F for 150mm size Aluminium handles, cast type, anodised.

Taking down shutters exceeding 1sqm and not exceeding 2 sqm all as specified and as directed.

M&L for Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed

S&F 35mm thick plain, framed, factory made panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated.

S&F in Stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples all as specified and as directed.

S&F in repair anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, 200 mm long tower bolt ,anodised aluminum snap beading screws complete all as specified and as directed.

S&F in for 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections.

S&F in repairs for 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work all as specified and as directed.

S&F for sheet glass, 5.5mm thick and glazing complete with beads fixed with brass screws exceeding 0.5sqm in each pane.

S&F of Mortice lock of 75mm made of aluminium (4 lever) all as specified and as directed.

S&F in repair of Mortice lock of 75 mm made of aluminium ( 4 lever) all as specified and as directed.

Taking down chowkats or frames n.exc 1.5sqm each but with shutters (without taking off shutters from the frames) all as specified and as directed..

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed.

Welding in repairs exceeding 2.5cm but not exceeding 5cm in length of steel gate, doors, windows, etc all as specified and as directed.

S&F for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

M&L preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Cleaning / desilting of existing drains constructed in any masonry including removal of vegetation, growth or brushes or small vegetation and getting out and removing the roots including disposing off excavated silt,soil vegetarian, shrubs etc to a distance not mexc 50m where directed and deposited to a level not exc 1.50m above the starting point complete all as specified and as directed.

Demolition brick masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above ground level).

M & L cement concrete 1:3:6 type C-2 (40mm graded aggregate) in surface channels and drains.

M & L providing cement concrete 1:4:8 type D2 (40mm graded agggregate) in foundation filling and mass concrete.

M&L brick work with sub class "B" bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:6.

M&L brick work with sub class "B" bricks, in brick on edge wall (less than half brick) built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc,

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and as directed..

M&L providing cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as in coping complete including formwork complete all as specified and as directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

S.RAMACHANDRAN