VILLAGE BAURHAI KALAN BLOCK MALERKOTLA2 DISTRICT SANGRUR PRWSSIP Component 2ai

Amount

Component -1

Providing and installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of reputed make capable of delivering 390 LPM against a head of 80 mtr (15.00 BHP) along with including M.S. Column Pipe of suitable size 80mm=50 mtr (in 3 mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable 4mm2 = 100 mtr. (reputed make) complete in all respect as per standard Specifications.

Providing & Fixing Electric Panel Board (ISI marked) Consisting of electric appliances such as Automatic star Delta Push Button with oil immersed starter, Main switch, VM ampere Meter, E LCB, shunt capacitor, single phase Preconter, including lamps, Kit-kat etc. Complete in all respect.

Repair of Pump Chamber

White washing scraping inside of Pump Chamber.

Scraping of snowcem robbiacem etc.

White washing 2 coats inside of Pump Chamber

Finsing Wall with exiterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade.

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint.

Painting two coats excluding priming coat with ready mixed paint in all shades on old wood work With special quality paint.

Scraping of plastering of Pump Chamber.

Plastering 1:4, 12.5mm thick on Pump Chamber.

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish complete. Inside pump Chamber.

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.

Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled.

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

Repair of terracing consisting of tiles 22.86cmx11.43cmx3.83cm laid of RCC slab

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing of electric tube set of reputed make

Painting Transparency wall & by laws of GPWSC.

Repair of OHSR

Repair of Expansion Joint. Size 100 mm i/d complete in all respects.

Repair of Expansion Joint. Size 80 mm i/d complete in all respects.

Repair of dome and wall leakage including scraping & plastering complete in all respects.

Painting of OHSR pipes including cost of labour & material complete in all respects.

Painting of OHSR stair case railing and pickets including cost of labour & material complete in all respects.

P/F OHSR Jali complete in all respects.

Providing & fixing aluminium ladder inside the tank.

Conglomerate floor 40mm cement concrete topping 1:2:4 for plinth.

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8 & (as per Analysis A-6).

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

12.5 mm thick cement plaster 1:4 Walls outside G.L. & Top for foot path.

Cement concrete 1:8:16 with 40 mm gauge stone aggregate to be used instead of brick ballast for foot path.

Conglomerate floor 40mm cement concrete topping 1:2:4 for foot path.

Detail of Repair and minor Replacement of existing pipe line

Provision for making new connection with exit pipe line as per analysis A-20 complete in all respects.

Hand boring Horizontally for crossing of pipe under road or any other obstacle by using Auger/Bocki method. Including excavation, stringing and jointing of pipe upto 160 mm complete.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Automated water controller switch to start or stop the pump based on water reservoir level complete in all respects.

Component -2

Providing proposed water connection on existing pipe line to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Component -3

Providing, Laying, fixing & jointing of PVC Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including excavation & back filling complete as per specifications for more than 3 mtr street width included excavation.

PVC pipe 63mm o/d 6Kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 2No. With each of Size 0.6m x 06m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 1No. With each of Size 0.9m x 0.9m

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting.

PVC pipe 63 mm o/d

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects as per analysis A-25

PVC pipe 63 mm o/d

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I pipe lines 15mm i/d=2.50 mtr (as per CSR 28.36 (a)) & MDPE pipe 15mm i/d = 2 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3'' i/d clamp with c.i. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approvel make as per CSR 30.65 (b) complete.

Providing & fixing MS Sign Board as per standard size of DWSS as per analysis A-24.

Cost of Component-4 (Operation and maintenance)

Provision for sodium chloride for disinfection of water Complete in all respect.

Credit of old machinery complete in all respect