Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹2.4 L
Closing Date
15 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT GEN
15 conditions · 4 needing a document upload
Only those firms which in their individual capacity, satisfy Standard Financial Criteria(s) need to quote for this tender. :The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. The tenderers shall submit Certificates to this effect which may be an attested Certificate from the concerned department / client and/or Audited Balance Sheet duly certified by the Chartered Accountant etc.
The tenderers must submit the copy of valid Electrical contractor license along with their offer. Offer shall be rejected summarily, if tenderer does not have valid Electrical contractor license on the name of an individual / Proprietor / Partner / firm issued by the State / Central government.
As a proof of Technical Eligibility, the Tenderer(s) have to submit details (Technical Eligibility) as per Annexure-13 Tender Document, indicating that Contractor have completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Format of completion certificate to be produced is provided as annexure-18 of tender docuemnts. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: Similar work is defined as under: "Wiring, Rewiring in Buildings with associated electrical works or Lighting arrangement in buildings, circulating area, yard streets etc with associated electrical works or Wiring/ Rewiring, Lighting arrangement in buildings with associated electrical works."
30 conditions · 7 needing a document upload
GSTIN number: Bidder shall submit attested or self attested copy of GSTIN certificate.
Following documents shall be submitted by the tenderer: (A)SOLE PROPRIETOR SHIP FIRM: (i)All other documents in terms of clause 1.1.12 of tender document . (B)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of clause 1.1.12 of tender document. (C)PARTNERSHIP FIRM:(i)A notarised copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarised or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.(iv)All other documents in terms of clause 1.1.12 of tender document . (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING MORE THAN Rs.10.00 Cr. Not applicable for this tender. (E)Company registered under Companies Act- 2013:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.(ii)A copy of Certificate of Incorporation.(iii)A copy of Authorization / Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)All other documents in terms of clause 1.1.12 of tender document. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: (i)A copy of LLP Agreement.(ii)A copy of Certificate of Incorporation.(iii)A copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (G)Registered Society & Registered Trust: The tenderer shall submit: (i)A copy of the Certificate of Registration.(ii)A copy of Memorandum of Association of Society/Trust Deed.(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv)A copy of Rules & Regulations of the Society.(v)All other documents in terms of clause 1.1.12 of tender document .
The tenderer shall submit a copy of certificate (Annexure 19(A)) in case of other than Company/Proprietary firm by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Note:- As per railway board letter No. 2022/CE-I/CT/GCC Correspondence Dated: 14.05.2024 "On IREPS Module, a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by the tenderer had been discontinued on IREPS".
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid-security in respect of E- tendering will be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA of GCC Works 2022 and shall be valid for a period of 90 days beyond the bid validity period and any offer without the same will be treated as invalid. Details of bank account no. and technical details have been provided for in the software (IREPS) to which prospective registered tenderers will have access at the time of tendering.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv)The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v)The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi)The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right-hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii) If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Any typographical error shall not be construed to be benefit of the contractor; in such cases the interpretation and decision of Sr. DEE/G/JAT shall be final and binding upon the tenderer.
The tenderer shall study the Northern Railway General Conditions of Contract Regulations for Tenders & Contracts - 2022 or latest along with tender documents before submission of the tender.
Applicable charges/recoveries/Advance etc. (Deployment of Technical supervisors per attached Annexure XIII) is applicable.
There is an option of payment to contractor through a letter of credit (LC) arrangement (Authority Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2018) as given in clause 1.3.14 of tender document.
GCC works 2022(or latest if any) should be the integral part of this tender.
Electrical Work in c/w Improvement of Lighting Arrangements in Ventilated Tunnels T-25, T-23, T-07, Station Yards, Circulating Areas, Colonies, etc., over BJPL-SVDK SECTION.
251-J-Elect-T-20-2025-26~NR
251-J-Elect-T-20-2025-26
Open
Works - General
6 Months
Jammu, Jammu And Kashmir
₹0
₹2.4 L
15 Jan 2026
24 Dec 2025
1 Jan 2026
77 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,81,43,065.03 | ||
| — | 2.00 | — | — | ||
| Supplying, erection, testing & commissioning of 16 Meter high mast system with its accessories. Mast shall be in two sections, hot dip galvanised and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame, steel wire rope 6mm dia 7/19 construction) double drum winch, Galvanised lantern carriage arrangement suitable for 8 luminaries symmetrically and its control gear boxes and its lighting finial. The mast shall have an integral power tool installed inside the base compartment for its operation. Erection and commissioning of the high mast with the help of suitable equipments. | — | — | — | 4,70,666.66 | |
| — | 40.00 | — | — | ||
| Supply, installation, testing and commissioning of 150 Watt LED based flood light fitting, operating voltage single phase 230V AC, 50Hz complete with led lamp & all mounting arrangement, accessories & flexible copper wire for connection as per ISS/IR rules & as per CEE/NR Specification No. CEE/NR/121 Elect/PS/2018 (Rev.03) dated 28.06.2018 & CEE/NR/121-Elect/PS /2019 (Rev.4) dated 04.11.2019 respectively or latest. | — | — | — | 5,12,378.4 | |
| — | 2.00 | — | — | ||
| Fabrication, supply and erection of Fencing around the high mast in square shape size 2M x 2M and height 1.5M from ground level fabricated from MS angle size 40x40x6mm, MS Flat size 40x6mm and wire mesh made of 8SWG wire and 1M wide hinged type lockable door as per drawing approved by Railway including grouting, CC platform around the high mast above 0.30M above ground level and painting etc. and as per technical specification. | — | — | — | 9,768.98 | |
| — | 2.00 | — | — | ||
| Design, manufacturing, supply, erection, testing and commissioning of astronomical timer switch along with TPN 63 Amps and associated accessories as per detail (a) Astronomical time switch model SEL-170 tiop of Indo Asian or equivalent MDS, Legrand, Siemens, L&T, ABB, AEG (b) 65 Amps TP contactor model No. LBF 650 A or equivalent of L&T, Siemens, ABB, AEG (c) TPN MCB 63 Amps (d) Accessories like wiring, locks, hinges, gaskets, nuts & bolts etc.( e) MS fabrication box 2 mm CRCA sheet size 17"x12"x6" powder coated to 50 micron thickness. | — | — | — | 37,666.66 | |
| — | 2.00 | — | — | ||
| Supplying, Installation, testing & commissioning of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates including design and casting of suitable shallow foundation with M-15 concrete for the high mast considering the safe soil bearing capacity at site as 10 T/Sq. Mtrs. at 2 mtrs depth | — | — | — | 38,360.28 | |
| — | 2.00 | — | — | ||
| Supplying, Installation, testing & commissioning of twin dome aviation obstruction light with 2 nos. LED lamps. (One fitting per mast is necessary if no taller structure are in near vicinity). | — | — | — | 3,081.88 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of minimum 75 Watt LED based High Bay light fitting complete & as per CEE/NR Specification. No. CEE/NR/121- Elect/PS/2018 (Rev '3') Dated 28.06.2018 | — | — | — | 82,559.44 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of minimum 150 Watt LED based High Bay light fitting complete & as per CEE/NR Specification. No.CEE/NR/121- Elect/PS/2018 (Rev '3') Dated 28.06.2018 | — | — | — | 1,13,060.8 | |
| — | 30.00 | — | — | ||
| Supply and erection of 36 W recess type LED light fitting (2x2 ft) complete with control panel & all accessories including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing, commissioning & earthing required and as per CEE/NR specification No. CEE/NR/121- Elect/PS/2018 (Rev.03) dated 28.06.2018 & CEE/NR/121- Elect/PS/2019 (Rev.4) dated04.11.2019 or latest | — | — | — | 1,30,986.3 | |
| — | 60.00 | — | — | ||
| Supply, erection, testing and commissioning of 30W LED flood light fitting complete with all accessories including testing, commissioning and earthing including connections with 2x2.5sq.mm PVC insulated multi-stranded FRLSH ISI marked copper conductor cable from Jn. Box to fitting as per CEE/NR Specification. No. CEE/NR Specification. No. Pr.CEE/NR/121 Elect./PS/2019/Rev.- 3 &Rev.4 or latest including fabrication MS box and asper explanatory note. | — | — | — | 3,27,382.8 | |
| — | 450.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED tube light system wattage 18 Watt to 20 Watt complete with all mounting arrangement & accessories & flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement as per CEE/NR Specification No. CEE/NR/121 Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121 Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, | — | — | — | 2,50,942.5 | |
| — | 280.00 | — | — | ||
| Supply and erection of 45 W LED Street light fitting operating voltage single phase 230 volts AC, 50Hz complete with all accessories as per CEE/NR Specification No.CEE/NR/121 Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121-Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing, commissioning & earthing required as per specification | — | — | — | 9,53,562.4 | |
| — | 130.00 | — | — | ||
| Supply & erection of 5M pole with single arm bracket hot dip galvanized octagonal pole with top 70 mm and bottom 130 mm around face made of 3 mm thick, steel base plate size 200x200x12 mm complete with appropriate sleeve at the top of the pole for mounting arm bracket 300 mm long suitable for LED street light fittings including casting, muffing with cement concrete foundation (1:2:4) painting, earthing and foundation GI nut, bolts with washer and smart pack junction box with single pole MCB and terminals as per explanatory note. | — | — | — | 10,40,767 | |
| — | 60.00 | — | — | ||
| Supply & erection of 5M pole with double arm bracket hot dip galvanized octagonal pole with top 70 mm and bottom 130 mm around face made of 3 mm thick, steel base plate size 200x200x12 mm complete with appropriate sleeve at the top of the pole for mounting arm bracket 300 mm long suitable for LED street light fittings including casting, muffing with cement concrete foundation (1:2:4) painting, earthing and foundation GI nut, bolts with washer and smart pack junction box with single pole MCB and terminals as per explanatory note. | — | — | — | 6,07,879.8 | |
| — | 25.00 | — | — | ||
| Supply and fixing of bracket on pillar or as required made out of GI pipe 1 M 40mm dia class B GI pipe with ISI marked of approved make & shape suitable bracket shall be fixed with double clamp made of 40x5 mm GI clamp & suitable GI nut bolt & washer & as per explanatory note & as per site. | — | — | — | 12,058.25 | |
| — | 10.00 | — | — | ||
| Supply, erection testing & commissioning of 6 meter height single arm decorative GI pole with cast aluminium arms including 1 nos 80 watt tear drop pendant LED fitting along with foundation as per manufacturer''s design complete. | — | — | — | 3,19,930 | |
| — | 10.00 | — | — | ||
| Supply, erection testing & commissioning of 6 meter height double arm decorative GI pole with cast aluminium arms including 2 nos 80 watt tear drop pendant LED fitting along with foundation as per manufacturer's design complete. | — | — | — | 4,11,239.7 | |
| — | 300.00 | — | — | ||
| Design, Manufacture, supply, fixing, testing and commissioning of double sided LED type signages at platforms of suitable size as CEE/NR specification No. CEE/NR/121-Elect/PS/2018 (Rev'3') Dated 28.06.2018 or latest. and as per site requirement. Note:- Static/Double sided board of different sizes name is required. prior approval of message color and size to be taken from competent authority. | — | — | — | 4,98,414 | |
| — | 800.00 | — | — | ||
| Design, Manufacture, supply, fixing, testing and commissioning of single sided LED type signages at platforms of suitable size as CEE/NR specification No. CEE/NR/121-Elect/PS/2018 (Rev'3') Dated 28.06.2018 or latest. and as per site requirement. Note:- Static/single sided board of different sizes name is required. prior approval of message color and size to be taken from competent authority. | — | — | — | 11,50,744 | |
| — | 8.00 | — | — | ||
| Supply and providing of Maintenance Free Earthing with primary MS conductor 40 mm dia 3000 mm long and secondary MS Electrode 80 mm dia 3000 mm long including digging pit of size 5ft.x5ft.x10ft. and using earth enhancement chemical compound minimum 75 kg. Per pit suitable for 40 KA current capacity and as per RDSO specification No. RDSO/PE/SPEC/PS/0109(REV- 0)-2008 and as per explanatory note. | — | — | — | 1,14,802.64 | |
| — | 40.00 | — | — | ||
| Connection with GI strip 300mm deep in ground/recessing in floor/clamping in Trenches of sub station by grouting clamps manufacture with MS sheet 14 SWG, from earth electrode strip to HT panel/LT panel/AMF panel/Transformer/DG set etc. as per approved drawing and technical specification including supply of material, of size: 40 X 5 mm | — | — | — | 5,540 | |
| — | 35.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly. Representative, cover with locking arrangement shall be provided. | — | — | — | 77,055.3 | |
| — | 350.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as mentioned in explanatory note. | — | — | — | 3,507 | |
| — | 2500.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Above 25 sq.mm | — | — | — | 1,48,325 | |
| — | 2500.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Upto 25 sq.mm | — | — | — | 1,42,750 | |
| — | 35.00 | — | — | ||
| Design, manufacturing of floor mounted MS feeder post made of MS sheet 16 SWG Die pressed of size 550mm x 450mm x 275mm deep complete with 400A Aluminium bus bars four Nos. having cable glands 2 Nos. duly grouted with cement concrete ratio 1:2:4 duly earthed with earthing terminals. | — | — | — | 1,26,191.45 | |
| — | 1000.00 | — | — | ||
| Excavation of cable trench by cutting/breaking station platform concrete/pucca floor digging 400 mm deep and then refilling after laying of cable as per IS 1255:1983 and technical specification enclosed on a cushion of sand 100mm below and providing protective bricks as per drawing and soil and ramming, leveling and repairing and finishing the said portion of platform with 1:2:4 cement concrete mixture100 mm deep from top. I)Trench width 300mm wide for laying up to 3 cables with 9 protective bricks per meter. | — | — | — | 3,81,400 | |
| — | 2200.00 | — | — | ||
| Supply & erection of 103 mm Inner dia Double Walled Corrugated pipe in ground under Railway track/road as required and as per explanatory note. | — | — | — | 7,61,662 | |
| — | 100.00 | — | — | ||
| Provision of cutting & removing of all type pole including dismantling of foundation & pole to be deposited in SSE/P store | — | — | — | 71,500 | |
| — | 250.00 | — | — | ||
| Supply of paint and painting of Rail/Tubular poles and brackets with superior quality aluminium paint after scrubbing the old paint on top and green enamel at the bottom of the poles upto 1.5 Mtrs height from ground level. The poles should be painted in two coats of paint. | — | — | — | 27,000 | |
| — | 150.00 | — | — | ||
| Supply, fixing, testing and commissioning of pole mounted junction box made of SMC base and door having lockable cover with 2x15 Amps kit kat fuse/6A DB MCB with 3 way neutral links for incoming and outgoing cables etc as per technical specification and site conditions, ISS/IE rules. Similar to be approved by Railway representative. The box shall have cable termination for loop in/loop out for 4 core 16/25 sq.mm cable. Make: Sintex model No. GS-JB 2014 or similar. This work includes connection with wire of suitable size an MS conduit pipe for fixing of junction box including earthing. | — | — | — | 93,157.5 | |
| — | 1.00 | — | — | ||
| "Design, Manufacture, supply, erection, testing & commissioning of the outdoor type LT Feeder Pillar , suitable for 3Phase, 4 wire 415 Volts, AC supply system comprising with : Incoming MCCB 4P 250Amp with adjustable thermal magnetic release & 35KA B/C =01 No. Outgoing MCCB 4 Pole 125 A 35 KA B/C - 02Nos. Outgoing MCCB 4Pole 63 A 35 KA B/C - 06Nos. Outgoing MCCB 4Pole 32 A 35 KA B/C - 04Nos. The feeder pillar shall be complete with 250ACopper Bus Bars for Phases and 125A for Neutral as per drawing approved by Railways and explanatory note. Note: Design and mounting arrangement of feeder pillar shall be got approved from competent authority." | — | — | — | 1,88,000 | |
| — | 1.00 | — | — | ||
| Design, manufacturing, supply erection testing & commissioning of outdoor type feeder pillar type panel LT distribution system suitable for 3phase 4 wire 415 V AC supply comprising : i) I/C MCCB 4P 125A with adjustable thermal magnetic release & 35A KA B/C-1No. ii) Out going MCCB 4P 63 A with 35 KAB/C -2 Nos. iii) Out going MCCB 32A 4P with 5KAB/C- 6Nos. The feeder pillar shall be complete with copper bus bars 150Amps. for phases and 75Amps for neutral as per drawing approved by railways and explanatory Notes | — | — | — | 1,22,370.02 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos. | — | — | — | 14,704.27 | |
| — | 100.00 | — | — | ||
| Supply and fixing of MS powder coated perforated cable tray made out of 2 mm thick CRCA sheet of size 300x100x100 mm with cover 2 mm thick. | — | — | — | 2,07,000 | |
| — | 500.00 | — | — | ||
| Supply of paint and painting of various electrical equipment viz; small panels, water cooler cages, switch boards and fire hose cabinets etc after scrubbing the old paint. | — | — | — | 4,655 | |
| — | 26.00 | — | — | ||
| Supply, fixing, testing and commissioning of All in One Solar Street Light with luminaire Wattage 20 Watt LED ,solar PV module 12V 75 W mono-crystalline, battery (liFeP04) with BMS 12.8V 30 Ah, backup 24 hours with dimming, solar charge controller MPPT, Color temperature 5700K, Luminous Efficiency >110 Lumen/watt, life span>50000 hours, driver In built AC-DC type, IP 65 standards, low voltage indication red light, charging indication Green light, temperature range - 10 to +55 degree C as per site requirement. | — | — | — | 12,61,000 | |
| — | 1500.00 | — | — | ||
| Supply, installation, testing, and commissioning of lighting fixtures for permanent and emergency tunnel lighting, wall-mounted of symmetrical type. The armatures shall be fitted with accessory cabinets equipped with all electrical accessories required for correct operation of LED lamps, with a power factor not less than 0.95. The fixtures shall have a stainless steel corrosion- resistant body, specular aluminium flow recuperator reflector, polycarbonate diffuser with smooth outer and photo-engraved inner surface, ceramic lamp holder with silver-plated contacts, silicon rubber gasket, nylon grommet dia. ½ gas, corrosion-proof and seizure-proof nuts & bolts, and a thermally isolated watertight wiring box with quick coupling system. Protection shall be IP65 or better, suitable for LED lamps of 18/20W (minimum 2000 lumens for 18/20W fitting) as per specifications. The scope of work includes supply of LED lighting fixtures (18/20W ), supply and erection of point wiring using 3-core 1.5 sq mm copper conductor PVC insulated cable including laying , terminations and jointing up to each fixture, supply and ,earthing arrangements for fixtures and associated equipment, as well as all necessary accessories, connections, consumables, clamps, fasteners, and mounting hardware. The work also includes complete testing and commissioning of the lighting system. The cost of this item shall be deemed to include supply of fixtures, point wiring with 3-core 1.5 sq mm copper cable, cabling, accessories, and commissioning in full, with no extra payment admissible unless otherwise specified in the BOQ. | — | — | — | 74,20,995 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .