Purchase of Secondary collection vehicle Tipper Lorry in Vathalagundu Town Panchayat

Amount

PURCHASE OF SECONDARY COLLECTION VEHICLE

Supply and delivery of Mini Tipper Lorry with Power Take of arrangement, Driver cabin having a payload varying between 3.00 MT to 4.00 MT Capacity and hydraulic tipper body with wheel base of 2955 mm , Wheels and Tyres (7.00 R 16-12PR Radial Ply 4+1) . The diesel engine shall be of suitable capacity notified by the manufacturer without exceeding the turning radius beyond 5.50 m, GVW -4.45 M.T , MAXIMUM PERMISSIBLE (Front axle weight) FAW 2050 kg , MAXIMUM PERMISSIBLE (Rear axle weight) RAW 2400 kg , BODY SIZE of 2.627m x 1.98m x 0.526m = 2.74 Cum , ENGINE POWER of TURBO INTERCOOLED - 75 Ps at 3050 RPM , GEAR BOX of G - 380 Synchromesh- 5 Forward 1 Reverse, BRAKES of Vaccum assisted dual circuit hydraulic with tandem master cylinder, (12V, 70Ah capacity BATTERY) , 60 Litres TANK CAPACITY, SERVICE INTERVAL for 20,000 Kms , and Power Steering including cost of chassis, cabin and hydraulic tipping arrangements for automatic unloading of solid waste complying with standard specification and satisfying relevant BIS including registration, insurance etc. for delivering the vehicle with suitable guarantee clause in a serviceable condition. The accessories should include side mirrors, bumpers, bottle holder, mobile phone charger, tarpaulin sheet and poly propylene roped nylon net with maximum 25 mm opening for coverage of vehicle during rainy season and other important items needed for safety of the vehicle etc. The Tipping cylinder / Ramp Kit / Jacky should be of reputed make with BIS mark. The Tipper body shall be of sufficient size to convey 3 to 4 tonne. The cargo body shall be not less than 12*6.5*3 feet in size. It shall be fabricated from chassis sub frame of size not leaner than 5” * 205” and body main frame of 4” * 2” MS channel supported by cross members of 3” * 1.5 MS channel. The platform plate shall be not less than 4 mm thick Jappan plate and the door and side plate (Double door) shall be not less than 3 mm thick Jappan plate. The Specification in general should conform to the standards postulated under relevant BIS and should bear its certification mark. The cost includes Taxes and duties, Road tax (life)Ï Registration, Insurance, etc, complete. The colour coding should be as per departmental officers instructions. The specification should conform to the standard postulated under relevant BIS and should bear its certification mark. The cost includes taxes, registration and insurance. The cost of the above vehicles chassis should be covered under DGS&D rate contract price if available or special Government price if available.

Jayaraj Automobile Agency