Re-development of Eco Park at Chetpet Chennai

Amount

A. CIVIL WORKS

Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Supplying and laying of M. Sand & Gravel Mix in ratio 1:1 for each layer laying of 15 cm thick using 0.631 m3 of M.sand fo filling and 0.675 M3 of red gravel of 1m3 of volume including cost of sand gravel mix including labour charges for mixing , laying compaction all tools and planks employed etc., complete complying with standard specification and as directed by the departmental officers

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 3 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers.

Supplying and filling approved RIVER SAND of specified quality for sand pits in play zone area. The rate including the cost of sand, labour charges,tools and tackles,royalties, transportation to site for all leads and lifts, loading, unloading, spreading in layer not exceeding 150 mm thick, watering, ramming, compacting with mechanical compactors and/ or other equipment to specified level all complete and as per the standard specification.

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 cement , 4 sand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.

Construction of granular sub-base (GSB) Grade - III by providing close graded Material of size 46.5 mm to 26.5mm, 26.5mm to 4.75mm and 4.75mm below conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cu.m drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

Basement & Foundation

Ground floor at 4.5m height

Providing and constructing cast in situ 450 mm dia hydraulic bored piles of specified diameter in M30 grade concrete using blended cement - slag cement with minimum cement content of 400kg/m³ in accordance with the structural engineers drawings and directions, but exculding reinforcement including cost of mobalization of all necessary plants, equipment's like piling rigs, permanent casing of appropriate length for setting out cardinal points and the removal of the same, boring in overburden, using bentonite mud circulation technique or any other method duly through all strata upto the foundation level of piles etc., complete all as approved by the departmental engineer. Further include dewatering, placing concrete by tremie pipe method, disposal of bored material outside the site. Including Chipping carefully cut off portion of piles as required without any damage to the piles and dressing the top and removing all the debris away from the site with out any extra cost as directed including the cost of all tools, plants, conveyance, all labour, lead and lift required etc .,Conducting standard penetration test to identify the refusal strata for atleast 1 pile in group and atleast 25% of piles, comparing with refusal strata as indentified in soil report and providing socketting into refusal strata by 1.00mt or into hard rock by 100% dia of the pile. (Length of pile for payment shall be measured up to bottom of pile cap).

Supply and Fabrication of Mild steel Liner tube of 450 mm dia with MS Steel plate of 6 mm thick including all charges for Transporting and Bending of the liner tube to the required shape and size including welding with Standard Electrode materials to required Thickness etc complete as Directed by the Departmental officers incharge of work & Installing pitching driving 6mm thick Ms inner tube of up to 450mm dia in all soils including incitental charges , machinery charges and Labour for Holding in Vertical alignment in Position for 450 mm dia Bored cast in situ pile etc complete as directed by Engineers

Installing pitching driving 6mm thick Ms inner tube of up to 450mm dia in all soils including incitental charges , machinery charges and Labour for Holding in Vertical alignment in Position for450 mm dia Bored cast in situ pile etc complete as directed by Engineers

Supplying and conducting Pile integrity test (PIT) on the piles under each cluster by using 6 lbs nylon tipped hand held hammer, glueing sensitive accelerometer on top of the pile by petro wax or petroleum jelly after making the pile head smooth and even by disc grinder, providing stage wise and final report along with relevant conclusions etc. as directed by client / Engineer in charge. as per latest IS - 2911.

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with with relevant standard specification, as directed by the Engineer-in-charge.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

for plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

For Circular / Angular surfaces

Supply and constructing Fly ash Brick masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure using Fly ash Bricks of size 230x110x75mm etc., complete complying with standard specification and drawings and as directed by the Engineer-in-charge.

Basement level

Ground floor level upto 4.5 m height

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine river sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and painting of Two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Ceiling & Internal surface)

Supplying and Laying of Textured Paint of approved colour & shades with one coat primer over a existing / new surface. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer- in-charge.

Supplying and fixing Dadooing the wall with Wall Tileof approved quality, colour and design joint free of size 300x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying of Flooring withVitrifid tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.. (Including Skirting)

Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc.,

Supply and laying flooring with best quality the following materials of Machine Polished granite slab not less than 18 mm thick Grey Granite in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and Laying flooring with best quality approved colour 18mm thick Flamed Steel Grey Granite Slab for flooring of size not less than 1200 x 600 mm machine cut and set in C.M 1:4 (1 of cement: 4 of manufactured sand) 20 mm thick topped with white cement slurry (tor surface contact of the bottom of the granite slab) as per approved pattern, Including tinishing the joints with matching shade cement slurry,cutting, edge chamfering and polishing rough medium, nice and tin-oxide polish.Rate including all materials, labour charges wastages, necessarylead and lifts, working at all levels, transportaton charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel,curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Polishing and Nosing the Granite Slab To Half Edge to round shape and finishing the surface neatly etc. complete complying with standard specification as directed by department officers (Double Nosing)

Cladding the wall with pre polished multi colour granite slabs ( 16 - 18 mm thick ) and best quality free from all the defects and set in CM 1:2 for 10 mm thick / any other adhesive materials etc., Rate including all materials, labour charges wastages, necessary lead and lifts, working at all levels, transportaton charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel,curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply & Laying flooring with best quality approved colour Granite Slab, (Black ribbed / Black Leather granite ) not less than 18 mm thick of size not less than 1200 X 600mm machine cut and set in CM 1:4 20 mm thick topped white cement slurry (for surface contact of the bottom of the slab as per approved pattern including the finish joints with matching shade cement slurry cutting edge chamfering and polishing rough medium nice and tin oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportation charges, loading & unloading charges, preparation of surfaces necessary hacking in RCC surfaces cutting to required shape, edges, tools and plants curing, cleaning, acid wash over finished surface protection with Gypsum / pop layer over plastic sheet and removing the same before handling over as complete with all respect complying with relevant standard specification and as directed by the Engineer in charge

Terrace Waterproofing Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations.i) Making V' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting WaterproofingCompound admixed with cement.The roof slab gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats notless than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO: 1 (or) other approved equivalent make shall be spread over the prepared surface. The gap cement mortar 1:4 admixed with compound like CICO NO:1 or approved equivalent afterwards curing shall be carried out for two days a final layer of cement mortar of 1:3 admixed with water proofing compound like CICO NO:1 or approved equivalent make shall be laid to a thickness of 20 mm and draw a false line of 300 mm x 300 mm. On the spread mortar provide and lay well burnt brick bats (COBA) to a average minimum thickness of 55 mm (i.e.. minimum 40 mm thickness at lower end and 70 mm thickness at higher end). An additional layer of brick bat (COBA) shall be laid over the existing brick bat COBA surface if required to get the required gradient for adequate drainage giving a slope of approximately 1 in 120, which will be measured separately under relevant item.

The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, water proofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )

Supplying and laying of Top of roof with Solar reflective tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as per The the direction of the Engineer-In-Charge. make and brand of the tiles should be got approved by the Executive Engineer before use on works)

UPVC Window: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm125GSMand 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates ashandle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong etc.,

UPVC Ventilator Specification: Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Flush doors : Supplying and fixing single leaf flush door 32/30mm thickness poth side commercial ply and approved brand Century/ Merino/ Greenlam with T.W.frames of size 100x75mm at side verticals and top, 6Nos.of iron hold fast fixed in C.C.1:2:4 and 3Nos.of butt hinges 125mm long including wind appliances furniture iron fittings 2Nos.of iron pad lock 15cm long for locking arrangements and fixed in position as directed during execution.(ISI STD) Rate as per GCC 2023-2024 - Building

Providing and Fixing, overall 25mm thick WPC DOOR of size 0.75 X 2.1 m along with required frame of approved shade/design including providing and fixing 125mm long stainless steel butt hinges [for each shutter (vertical spacing not exceeding 600mm) including material cost, transportation, tools & tackles charges, providing wooden filler/sealer, round lock, fixing with door frame charges,door bush, finishing, labour cost etc . all completes as per the standard specifications and as directed by Engineer-in-Charge.

Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high quality EPDM granules and the bottom layer being 19 mm SBR. There are two types of pigments used in our EPDM which are organic and inorganic pigments. Inorganic pigments are used to manufacture Class 1 colours which are more stable. The granules shall be mixed on site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all weather, resilient, non slip, high impact and easy maintenance EPDM. We have two types of EPDM granules , SR 5560 & SR 6065 for the sports and recreational market. Koosafe EPDM sports granules SR 5560 is resilient to both outdoor weathering and UV exposure. The Koosafe EPDM SR 6065 range is specially designed for high durability. It is suitable for running track applications. The performance requirements and test methods for impact absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards. The supplier must have carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors.

STRUCTURAL STEEL WORKS: Supplying fabricating, hoisting, erecting and fixing in position Mild steel structural steel works of Gazebo roofs,& pavilion with seating area Gate for compound wall and grill at all elevations, levels and heights including aligning, leveling, providing and fixing bolts, nuts, washers, comprising MS plates, flats, squares etc., of various sizes and other structural steel sections conforming to latest IS2062 Grade - A&B including straightening, cutting, welding, bending to shape, bolting and inclusive of the following finishes. The rate including cost of all materials, labour chanrges, scafolding, stagging, transportation, lead & Lifts, wastage, etc., complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. All MS members shall be painted with one coat of zinc chromite primer and 2 Coats of 35 microns DFT of synthetic enamel paint of approved colour and make etc,.The rate includes the cost of all materials,labour,tools,tackle and plants, wastage etc.,as per specification and drawings complete. The rate quoted is to include cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for. The rate to include preparation of fabrication shop drawings for owner's approval.

Supplying & Fixing of MS Grill including cost of materials, cutting, welding and fixing Charges etc., all complete and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)

Supplying and Laying of Saint Gobain roofing Shingles including ridges and starters on the sloped roof by self adhered memberane above the 19mm thick BWP Plyboard which is fixed over the M.S. structural sections with necessary fixtures like fasteners, screws, etc.,also provide ice & water barrier sheets all around the edges before laying the Shingles. It includes all the material cost, transportation charges, loading and unloading charges, labour for laying charges, machinaries, tools & tackles, necessary scaffolding charges etc all completes as per the standard specifications and as directed by Engineer in charge.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for entrance using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete.The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fixing of Wooden Handrails using 75mm x 75 mm thick first quality salwood for all the top and bottom railings and 0.9m height vertical post with the crossed planks to be in 50 X 25 mm thick sal wood fixed to the M.S tubular section by using L angles with screws / fasteners or any other jointing materials. All cornors and the inner planks crossing portions are interlocked / connected by wooden nails by applying fevicol. It includes all the material cost, transportation charges, loading and unloading charges, labour for laying charges, machinaries, tools & tackles, proper finishes, necessary termite treatment, etc all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD DECKING (ON MS FRAMEWORK) :- Everwood composite EWD145x25 deck board fitted on hollow aluminium joist EWD 50x30EDx1.5mm framework. Framework fitted on exisitng MS C-section with intervals not exceeding 350mm c/c with aluminium L-clamp & necessary screws as designed. Composite plank fitted on joist with SS304 grade start & end clips / PA grade center clips fastened with corroshield 7x25CSK screws. Necessary sides to be covered with EWD57X10 trims as specified and finished all complete also ADDITIONAL MS FRAMEWORK FOR BOARD WALK DECKING :-PU finished MS C-section 75X40 elded to the exisitng C-section with necessary L-clamp as specified and all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD DECKING (ON CIVIL) :- Everwood composite EWD145x25 deck board fitted on hollow aluminium joist EWD50x30EDx1.5mm framework. Framework fitted on floor with intervals not exceeding 350mm c/c with aluminium L-clamp & N8/80 screws as designed. Composite plank fitted on joist with SS304 grade start & end clips / PA grade center clips fastened with corroshield 7x25CSK screws. Necessary sides to be covered with EWD57X10 trims as specified and finished all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD CURVED PAVILION PERGOLA :- Everwood composite profile EWD50X50 is fitted on PU finished MS frame with corroshield screw as specified. PU finished MS tube 100x100x3 & 100x50x3mm to be anchored to the floor/slab with necessary grout set as specified at the spacing 50mm c/c and all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD CURVED & ANGULAR PAVILION SEATER :- Everwood composite profile EWD146X21 is fitted on PU finished MS frame as specified.MS tube 50x50x2mm is welded to form a framework is fitted on floor through MS baseplate with necessary fischer as specified. Composite plank fitted on Ms flat with SS304 grade start & end clips / PA grade center clips fastened with corroshield 7x25CSK screws. Necessary sides to be covered with EWD80X10 trims as specified and finished all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD RAILING:- Everwood composite Railing post EWD75X75 with powder coated MS inserts 38X38X3mm to be fitted on the floor through base plate with SxR 10x80 fus fischer as designed. Horizontal fins EWD 70x40 fitted on sides of the post and vertical fins EWD 60x42 fitted in between horizontal fins with Aluminium clips and Corroshield 10X25/38w.h & csk self drilling screws as specified. All post top to be covered with specified WPC end cap and finished all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD SEATER 1:- Everwood composite profile EWD60X42 is fitted on PU finished MS flat with poco rivet as specified.MS tube 50x50x2mm & MS flat 50x6mm welded together to form a framework is fitted on floor through MS baseplate with necessary fischer as specified and finished all completes as per the standard specifications and as directed by Engineer in charge.

SUPPLY OF EVERWOOD SEATER 2:- Everwood composite profile EWD146X21 is fitted on PU finished MS frame as specified.MS tube 50x50x2mm & 50X25X2mm is welded to form a framework is fitted on floor through MS baseplate with necessary fischer as specified. Composite plank fitted on Ms flat with SS304 grade start & end clips / PA grade center clips fastened with corroshield 7x25CSK screws with necessary fischer as specified and finished all completes as per the standard specifications and as directed by Engineer in charge.

Supply & Installation of EVERWOOD WALL CLADDING on M.S. Framework Everwood composite cladd profile EWD175x18D fitted on hollow aluminium joist 50x25x1.5mm framework. Framework fitted on existing MS framework with intervals not exceeding 600mm C/C with corroshield screws. Composite plank fitted on joist with SS304 Start clips fastened with Corroshield 7x25CSK screws as specified and finished all complete as per standard specification and as directed by Engineer in charge.

Everwood composite louver with Ms 122X61 3mm thick bending and welded to form a structure as designed and EWD100X40 Louvers with powder coated ms inserts 50X25X1.6mm at 80mm centre to centre spacing in between including cutting bending as per required shape and size finishing weld joint to produce smooth surface painting the exposed ms surface with pu paint ( to Match wpc plank colour) over a primer coat including thorough scrapping clean removal of dirt etc all complete as per drawing and specifications..

Supply and Installation of Tensile Structures by using I.S.800 with the design wind speed as defined by IS: 875 based on location and site conditions and load combinations as defined by IS 875. The complete structure is finished with two coats of epoxy primer and two coats of epoxy paint colour approved by the client. The membrane should be minimum of 750Gsm and 950Gsm Tensile Membrane Fabric The above fabric will be patterned, welded with the high frequency welding machine, end pockets to accommodate kedar profile and will be fixed using special aluminium extrusions to suit the structure.The complete structure will be designed for wind load, live loads etc as specified and finished all completes as per the standard specifications and as directed by Engineer in charge. .

CHILDREN'S PLAY EQUIPMENT

Supply & fixing of Children multi play equipment ZEPHYR : with spiral slide, monkey bar with number pannel .All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The equipment comprises of 4 numbers of Upright structural posts of height 2.47 m, 2 numbers of Upright structural posts 2.6 m and 4 numbers of Upright structural posts 4.2 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm thickness of the tubing. Four numbers of Deck of size 1.14 x 1.14m and Staircase of size 1.5m x 0.77 m are fabricated from 2mm perforated solid punched steel. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Handrail of height 2.2 m and Dia 32 mm. Frisbee Climber, Piped walls of size 2.7 m. Roof of size 1.9 m x 1.7 m x 0.77m, Spiral Slide of size 1.16 m x 1.6 m x 3.6 m, Double Slide of size 2.2 m x 1.5 m x 1.45 m, Panels with color molded in and minimum thickness of 6 - 8mm. Toprails Of Monkey Bar of size 1.8 m x 1.3 m. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 6.81 m x 5.13 m x 5 m.

Supply and fixing of children Multi Play Equipment BRIGHTON" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. with curved slide, tunnel and side panels.The equipment comprises of 2 numbers of Upright structural posts of height 2.2 m, 4 numbers of Upright structural posts of height 2.4 m, 4 numbers of Upright structural posts of height 2.7 m, 4 numbers of Upright structural posts of height 2.8 m, 2 numbers of Upright structural posts of height 3.0 m and 4 numbers of Upright structural posts of height 4.5 m and 2.2mm thickness of the tubing. 7 numbers of Deck of size 1.14 x 1.14 m, Staircase of size 1.74m x 1.32 m and Impending stairs of size 0.80 m x 0.60 m and 1.05 m x 0.68 m are fabricated from 2mm perforated solid punched steel. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Monkey loop climber 1.87 m x 1.15 m x 0.6 m which has thickness of 48 mm curved bar. Crab Roof of size 2.00 m x 1.78 m, Spiral tube Slide of size 3.2 m x 1.82 m x 2.7 m, Triple Slide of size 3.95 m x 2.93 m x 1.80 m, L - curved Slide of size 1.7 m x 1.8 m x 1.2 m, Double Slide of size 2.3 m x 1.4 m x 1.2 m Panels with color molded in and minimum thickness of 6 - 8mm. PLAY EQUIPMENT DIMENSIONS: 12.33 m x 7.63 m x 5.69 m.

Supply and Fixing of 4 Seater See Saw: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. All Joints are Robotic Welded. PLAY EQUIPMENT DIMENSIONS: 3.10 m x 0.44 m x 0.80 m

Supply and Fixing of Fiero A Swing: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. Shaped structural posts of height 2.31 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Plastic Components such as swing seats [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. All Joints are Robotic Welded. PLAY EQUIPMENT DIMENSIONS: 3.21 m x 1.54 m x 2.50 m

Supply and Fixing of ( INFINITY BOWL ) : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The infinity bowl was designed to sit at an angle. This, paired with the dipped edge feature, allows ease of transfer. The deep bowl area provides supportive and comfortable seating for all users. The angle enables the bowl to self-propel. A child need only shift their weight slightly to get the bowl moving. The Infinity Bowl encourages both independence and cooperation when playing.Dipped access point, silver sparkle finish.Galvanised and Powder Coated steel bowl.Spinning, supportive movement, self propelled movement.All Joints are Robotic Welded. Dimensions LxWxH : 735 x 660 x 555 mm

Supply and Fixing of Horse Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. All Joints are Robotic Welded. HDPE of size 0.90 m x 0.40 m x 0.45 m..

Supply & Fixing of PIG RIDER: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.0.95 m x 0.47 m x 0.76 m.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 0.95 m x 0.47 m x 0.76 m

Supply & Fixing of Sea Horse Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. "All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. HDPE of size 0.83 m x 0.31 m x 0.87 m. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: 0.83 m X 0.31 m

Supply & fixing of Teddy Bear Rider: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. HDPE of size 0.68 m x 0.38 m x 0.74 m.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps. All joints are Robotic welded. All components designed and manufactured to meet with EN 1176 safety standards. PLAY EQUIPMENT DIMENSIONS: 0.68 m x 0.38 m x 0.74 m

Supply & Fixing of SATURN RIDER: " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. HDPE of size 0.70 m x 0.38 m x 0.76 m, Plastic Components [super thick plastic] shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with “color molded” in not “added in”. All rotational molding is carried out in state of the art, precision, bi axial roto moulding machines which helps achieve guaranteed uniform wall thickness, seamless joints, accurate process control, one part construction to make it stress free. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with safety caps as a safety. All joints are Robotic welded. PLAY EQUIPMENT DIMENSIONS: HDPE of size 0.90 m x 0.40 m x 0.45 m..

SENSORY WALL

Supply and Fixing of KPSNK 005 :" The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The new HDPE play panels include different games, each with their own unique HDPE panel design. All panels are available in other colours or languages on request. The mounting holes must be drilled on installation. 3 IN A ROW- form three discs of your colour in a row in this classic game for two .Unique HDPE panel design.Solid HDPE material - thickness 19 mm. Available in other colours/languages on request.Mountingnting holes to be drilled depending on installation.All joints are Robotic welded. All components designed and manufactured to meet with EN1176 safety standards. Dimensions LxWxH : 735 x 735 mm

Supply and Fixing of KPSNK 008 : " The product to match the colours, design, size, contours and aesthetics exactly as per the image attached. " All components designed and manufactured to meet with EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only.The new HDPE play panels include different games, each with their own unique HDPE panel design. All panels are available in other colours or languages on request. The mounting holes must be drilled on installation.race your sliding disc as quick as possible from start to finish.Unique HDPE panel design.Solid HDPE material - thickness 19 mm.Available in other colours/languages on request.Available in other colours/languages on request.All joints are Robotic welded. All components designed and manufactured to meet with EN1176 safety standards. Dimensions LxWxH : 980 x 735 mm

OUTDOOR GYM EQIPMENT

All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot rest of size 320 mm x 132 mm are attached to the Standing Bars 998 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.02 m x 0.53 m x 1.52 m

The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.5 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. A single seat of size 330 mm x 250 mm fixed to the top of the vertical post and two Pedals & Bars of size 145 mm x 50 mm and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.91 m x 0.65 m x 1.27 m

The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.35 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably.Bearings : Maintenance- free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. Equipment Dimensions: 1.44 m x 1.29 m x 1.35 m

The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot Rest of size 361 mm x 161 mm are attached to the Standing Bars 957mm x 60 mm fabricated from 60 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.18 m x 0.553 m x 1.25 m

All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Foot rest of size 365 mm x 164 mm and Standing Bars of length 1640 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm O.D. The poles are welded on to a base plate made from steel with 114mm inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings : Maintenance-free sealed ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.61 m x 0.50 m x 1.50 m

The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.15 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 477 mm made with the pipe Dia of 32 mm fabricated from 32 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.25 m x 1.09 m x 1.49 m

The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.47 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 0.69 m and Dia 42 mm fabricated from 42 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 0.69 m x 0.61 m x 1.94 m

The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 1.02 m and Dia 40 mm while the handles are placed at a spacing of 698 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings : Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery : 1 completely pre- assembled equipment modules. Maintenance : Maintain according to EN16630 and the maintenance guide. EQUIPMENT DIMENSIONS: 1.82 m x 0.69 m x 1.88 m

PLAY COURT EQUIPMENTS

Volleyball nets span the entire width of the court (29’6” | 9 m) and are held rigid by outer poles typically set 3’(.91 m) from the court. The center height of a volleyball net differs for men’s and women’s play with men’s nets regulated at a height of 7’ 11.69” (2.43 m) and women’s at 7’ 4.35” (2.24 m). The dimensions of the playing court are often identified on the net surface by two antenna extending 32” (80 cm) above the net. Volleyball nets have a surface height of 39” (1 m) from top to bottom and are constructed with a polypropylene or nylon netting with a mesh size of 3.9” (10 cm) and are capped with stiff headbands along the perimeters.

Badminton Nets span the entire 20’ (6.1 m) width of the court and are placed over the doubles sidelines, even when singles games are played. The net has a height of 5’1” (1.55 m) at the edges and sags slightly at the center resulting in a height of 5’ (1.52 m). Badminton nets are split into a 1:1 ratio with a 30’ (76 cm) opening below the mesh and an equal surface above.

Supply and fixing of Badmiton poles for the multi purpose court that support the net. These posts are 1.55 meters (or 5 feet and 1 inch) in height from the surface of the court. The net, that goes on top of the posts, is also 1.55 meters (or 5 feet and 1 inch) on the sides and has to be installed in a way that the measurement is 1.524 meters (or 5 feet) at the center

Supply and fixing of green colour square chain link 2" X 2" using 10 guage galvanised iron wire of all sizes. The rate shall be includes material cost, labour charges, transport charges etc.,complete as per specifications and as directed by Engineer-in-Charge.

Supplying and fixing of 6mm thick galvanized iron Laser design with frame coated by P.U paint finish of required sizes and designs as per the drawings. It includes material cost, transportation, loading & unloading, shifting charges, scaffolding charges, Laser design / CNC cutting, hotdip galvanizing, buffing the surfaces, zinc coating primer,putty works, double coat of MRF P.U paint finishes etc., all completes as per the standard specification and as directed by Engineer in charge.

Dismantling & removing the existing Reinforced Cement Concrete work etc., by using required mechinaries including stacking of steel bars and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

Dismantling & removing the existing Plain Cement Concrete work etc., by using required mechinaries and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

Dismantling brickwork manually by mechanical means including stacking of serviceaboe material and disaposal of unservice material within 50 meters lead as per direction of Engineer in charge..

Dismantling , removing and carefully stacking Doors & windows including removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supply and fixing of PREFABRICATED SHOP CABIN (6' X 4' X 7.5') PUF model mild steel base frame, 16mm bison board with 1mm thick vinyl sheet for flooring, 30 - 40 mm thick PUF wall panels, 20-30mm thick PUF roof panels, PUF doors of size 2.25' X 6.5', UPVC sliding window of size 3' X 2' and other electrical fixtures like lights, fan points, sockets etc., overall one coat primer and two coat of paint finishes. It includes all the material cost, transportation, site installation, labour charges, loading & unloading all completes as per the standard specifications and as directed by EIC

Supplying and fixing of Metallic Sculptures of brass or equivalent material over a concrete surface of 4' height as per drawings with proper curing compacting etc., The rate shall be includes material cost, labour charges, transport charges etc.,complete as per specifications and as directed by Engineer-in-Charge.

Providing and Fixing Precast slab of 100 mm thick in Cement Concrete 1:2:4 using 20 mm thick hard broken stone jelly and M.Sand including the cost of reinforcements and Fabrication charges, moulding, curing, finishing and fixing in position neatly etc., complete complying with standard specification and as directed by the departmental officers

Supplying and Laying of Alluminium and Reflective Vinyl Signage board with proper design / drawing position, the cost includes material cost, labour charges, transport charges etc.,as directed by Engineer-in-Charge

Supplying and Laying of ACP name board with LED strips supports on the MS frame, Individual letter free standing with approved quality colour of the materials and fixtures approved by the client. It includes cost of the material, Labour charges, loading and unloading, transportation, etc., all completes as per the standard specification and as directed by Engineer in charge.

Supplying and laying Tamin Paver Block with pattern 80mm thick, Grey , Black and Red colour of approved sample as per designed Pattern / drawing made of M40 concrete - 80 mm thick including transportation of the blocks to the site preparation of surface including supplying and filling with manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.

Supplying and Fixing of Rolling shutter manual of size 2.45 X 2.1 M M.S Laths of size 80 X 120 mm Interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets side guages, and arrangements for inside and outside locking with push and pull operation to be suitable size and shape as per drawings etc., complete including the cost of providing and fixing necessary 27.5 cm long good quality wire springs grade No 2 and M.s top cover of 1.2 mm thickness for rolling Shutter the rate shall be inclusive of one coat of red oxide primer and two coats of synthetic enamel paint of approved quality and colour. rate including all material, labour charges wastages necessary lead and lifts transportation charges loading and unloading charges scaffolding staging installation charges as complete with all respect complying with relevent standard specification and as directed by the Engineer in Charge

FALSE CEILING WITH GYPSUM PLAINTILES Providing and fixing true horizontal level false ceiling using SAINT - GOBAIN GYPROC or Equivalent make with 24 mmGrid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C.C Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at 1200mm c/c max by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying with 12mm Gypsum plain Tiles the rate including all material, labour charges wastages necessary lead and lifts transportation charges loading and unloading charges scaffolding staging installation charges as complete with all respect complying with relevent standard specification and as directed by the Engineer in Charge

Renovating lift 6 passenger capacity of size 1.5 X 1.5 m with mordenised materials and sensor controls. The rate includes dismantling, handling, shifting the materials, labour charges, replacing with new materials etc. all completes as per the standard specifications and as directed by Engineer in charge

B. SOFT LANDSCAPE WORKS

Excavating of existing soil in overall landscape area for filling and levelling with the soil mixture maitained proper slope etc., It includes labour charges, clearing the excavating soil from the site, level maintaining, required slope maintaining etc., all completes as per the standard specification and as directed by the Engineer in charge

Supplying and Stacking of red earth at site to the departmental guage for Premeasurements which is of light textured, crystalline, porous and firable and not of generally acidic or neutral but not of alkaline and should not of alkaline and shoulde be fertile including seignior age charges, cost of transportation, loading & unloading, stacking and inclusive of all taxes etc., complete

Supplying and stacking of sand (supply & stacking of sand at site to the depatmental guage for premeasurements obtained from natural disintegrated rock which has been deposited by streams or glacial agenciesed of hard silicons materails and should be clean, sharp and angular type free of adherent coatings)

Supply of well decomposed farm yard Manure in a powdery form devoid of soil sand, stones, plastics and other materials highly nutrient and which supports plant Growth

Mixing charges of red soil, sand and manure uniformly (1:1:1) for preparation of soil Mixture (excluding material cost)

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness including hire charges of roller

Supplying and Planting Red palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Kentia palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Royal palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Washington palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Mirchimeri palm green 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Foxtail palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Champange palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bismarckia palm 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Terminalia mentalis 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nagalingam tree 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Kadhambam tree 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Panneer tree 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria white 7'-8' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Plumeria pudicca 4'- 5' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Lantana rubra red 4'- 5' feet height with necessary earth work excavation of size 600 X 600 mm and 600mm depth, the excavated pit is to be filled with red earth, sand and manure mix ratio of 1:1:1 ( 1 Part of red earth, 1 part of sand and 1 part of manure) up to 600 mm depth after planting the tree. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Table palm plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Umbrella palm plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Raphish palm plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nikotia plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting TMC Mini plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Song of india plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ceylon gold plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ixora singaporensis plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Dianella plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Nerium Dwarf plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Golden duranta plant of 2' height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Spider lilly plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Allamanda shrub plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Pentanus grass plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Ginger lilly plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Jatropha plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Eugenia plant of 2' Height by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Heliconia plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Cleodendrum inerme plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Dracena tricolour plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Dracena mahatma plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Galphimia plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Aralia plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Schefflara plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Junipers plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Adenium plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bougainvilla plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bamboo grass plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting African grass plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Bull rush marsh plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Allamanda creeper of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Rangoon creeper of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Vernonia creeper of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Money plant of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Monstera of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Planting Wedelia Ground cover of Bushy by excavating 300 X 300 mm size and 300 mm depth with soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 pard of sand) up to 300mm height. The rate includes cost of tree, filling soil mixture, labour charges for earth work excavation, planting, watering, loading, unloading and transportation charges etc., complete and as directed by Engineer in charge.

Supplying and Turfing Mexican grass over a soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 part of sand) up to 230mm thick. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and laying of Shade grass over a soil mixture of ratio 1:1:1 ( 1 Part of red earth, 1 part of cow manure and 1 part of sand) up to 230mm thick. The cost includes all the material, labour charges for Excavating, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge

Supplying and laying of Precast Cement pots of size 3' X 1.6' X 1.6' with approved colour / make for planting shrubs & creepers. The cost includes all the material, labour charges for, planting, watering, filling of soil mixture, loading and unloading, transportation etc., all complete as per standard specification and as directed by Engineer in charge.

C. MUSICAL FOUNTAIN

2D ROBOTIC JET 2D Robotic Nozzles : SITC of single axis robotic nozzle with 40mm inlet and 12mm outlet capable of smooth rotation complete with SS304 bends, gear box, water proof stepper motor, sensor and operating electronics designed for operating at 90 degree. Including necessary pipes, fittings, and accessories required to connect it to the pumps = 6 Nos Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 6 Nos Lights (RGB LED 18x3w with DMX control): SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required. for connecting the light power and signal cables to the main = 6 Nos

Cable for Pumps: 1.5 sq mm 3 core double PVC sheathed copper cable = 600 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 100 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 100 Rmt Cable for Stepper motor: 1.5 sq mm 4 core double PVC sheathed copper cable = 600 Rmt Cable for Stepper sensor: 1 sq mm 3 core double PVC sheathed shielded copper cable = 600 Rmt. Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 1 Nos.

SS Frame with uPVC / FRP Floats: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 6 Nos

The above description of all works to be considered as single set

CHASING JET Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height = 32 Nos SS header 50NB: 3m long SS Header with 4 SS nipples each = 8 Nos Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 8 Nos. Lights (RGB LED 18x3w with DMX control): SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main = 32 Nos

Nozzle: SITC of Vertical jet nozzle with 25mm inlet and 12mm outlet in SS / Solenoid Valve: Fast acting Solenid Valve in Brass / SS 25mm = 32 Nos Cable for Pump: 2.5 sq mm 3 core double PVC sheathed copper cable = 800 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 400 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 400 Rmt Cable for Solenoid: 1 sq mm 2 core double PVC sheathed shielded copper cable = 3200 Rmt Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 4 Nos.

SS Frame with uPVC / FRP Floats & Anchor Belts: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 8 Nos.

The above description of all works to be considered as single set

ARCHING JETS Nozzle: SITC of Vertical jet nozzle with 50mm inlet and 15mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height = 2 Nos. Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 2 Nos Lights (RGB LED 18x3w with DMX control): SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main = 6 Nos

Cable for Pumps: 2.5 sq mm 3 core double PVC sheathed copper cable = 200 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 200 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 200 Rmt Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 2 Nos.

SS Frame with uPVC / FRP Floats & Anchor Belts: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 2 Nos.

The above description of all works to be considered as single set

SUNBURST JET Nozzle: SITC of Vertical jet nozzle with 25mm inlet and 10mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height = 1 Nos. SS header 50NB: 2m long SS Header with 7 SS nipples each = 1 Nos Bal lvalves: 25mm ball valves in SS / Brass = 7 Nos Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 1 Nos.

Lights (RGB LED 18x3w with DMX control): SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main = 7 Nos. Cable for Pump: 2.5 sq mm 3 core double PVC sheathed copper cable = 100 Rmt Cable for Pump: 2.5 sq mm 3 core double PVC sheathed copper cable = 100 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 100 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 100 Rmt

Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 1 Nos. SS Frame with 2m uPVC / FRP Floats & Anchor Belts: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and/ or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 1 Nos.

The above description of all works to be considered as single set

TALL JET Nozzle: SITC of Vertical jet nozzle with 80mm inlet and 25mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height = 6 Nos. Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 6 Nos Lights (RGB LED 18x3w with DMX control): SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main = 18 Nos

Cable for Pump: 2.5 sq mm 3 core double PVC sheathed copper cable = 600 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 300 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 300 Rmt. Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 3 Nos. SS Frame with 2m uPVC / FRP Floats & Anchor Belts: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and/ or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 6 Nos.

The above description of all works to be considered as single set

CENTER JET Nozzle: SITC of Vertical jet nozzle with 65mm inlet and 20mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height = 2 Nos. Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 2 Nos. Lights (RGB LED 18x3w with DMX control): SITC of DMX controlled 54W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main = 6 Nos

Cable for Pump: 2.5 sq mm 3 core double PVC sheathed copper cable = 200 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 200 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 200 Rmt Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 2 Nos. SS Frame with uPVC / FRP Floats & Anchor Belts: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 2 Nos.The above description of all works to be considered as single set

OUTWARD CROWN RING Nozzles: SITC of Vertical jet nozzle with 20mm inlet and 6mm outlet in SS / Brass construction capable of a 15 degree + / - adjustment from vertical with integrated flow straightner for smooth flow of the water jet for the required jet height = 216 Nos. SS header 50NB: 2m long SS Header with 12 SS nipples each = 18 Nos Submersible Pump: SITC of high discharge and high head IP68 rated pump in SS 304 suitable for operating the above nozzle. MOC of pump housing, shaft and impeller is SS 304 and insulation class is H = 18 Nos. Lights (RGB LED 12x3w with DMX control): SITC of DMX controlled 36W RGB LED light with LED Chips mounted on a multilayered aluminium PCB plate with high quality narrow beam optics, inside a temperature regulated Noryl body with IP68 rating. Cable entry points to be filled with electrical grade epoxy for added protection. Light should be suitable for dry as well as underwater operation complete with submersible cables, connectors and consumables etc required for connecting the light power and signal cables to the main = 54 Nos

Cable for Pump: 2.5 sq mm 3 core double PVC sheathed copper cable = 1800 Rmt Cable for Light Power: 2.5 sq mm 2 core double PVC sheathed copper cable = 800 Rmt Cable for Light Signal: 1 sq mm 2 core double PVC sheathed shielded copper cable = 800 Rmt Junction Box for DMX 512 Lights: SITC of IP67 rated junction box in polycarbonate body and polyamide cover screws with suitable sized IP68 PVC cable glands with neoprene seals, Cable entry points in the junction box to be filled with electrical grade silicon sealant for complete protection from water ingress = 8 Nos. SS Frame with 2m uPVC / FRP Floats & Anchor Belts: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Jet with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 18 Nos.

The above description of all works to be considered as single set

LASER UNIT 5w RGB Laser with integrated software: LPS / Pangolin / Able = 1 Nos Software for Laser operation: Pangolin / Moncha software = 1 Nos DMX to USB: DMX Converter = 1 Nos Cable Laser Power: 1.5mm 3 core Flat double PVC sheathed copper cable = 100 Rmt Cable Laser Data: Cat 6 cable with necessary connectors etc = 100 Rmt

SS Frame with 4 Nos uPVC / FRP Floats: SITC of modular floating structure made of 25x25mm SS304 Tig welded square pipe frame with SS304 fastners custom designed to install the above Laser with suitably sized uPVC floats and ends sealed with FRP covers to protect it from water ingress. The frames to be fixed in place with SS tie frames and / or suitable sized concrete anchors fixed with minimum 3 ton holding capacity nylon tie belts with galvanised metal hooks and locking mechanism = 1 Nos. Enclosure for Laser with forced air cooling and RDM Panel: SITC of Weather Proof Laser enclosure to mount the Lasers outdoors in powder coated aluminium body with automatic temperature and humidity control at preset levels suitable for a 5W Laser. Air intake and exits to be suitably sized and protected with filters to protect the laser from dust and insects, complete with IP55 control panel for 24hr monitoring of temperature and humidity with interconnecting cables = 1 NosThe above description of all works to be considered as single set

FOUNTAIN ASSEMBELING AND ANCHORING SYSTEM (FOR FLOATING FOUNTAIN) Tie Frames to fix modular frames to each other: SITC of SS 304 Tie Frames custom designed to fix individual sets of floating frames to each other, complete with SS U clamps, SS fastners and all required accessories and consumables = 20 Nos Floating Cable Trays: SITC of SS 304 Floating Cable trays 6m long with 4 uPVC floats with die moulded FRP endcaps of min 8mm thickness and separate raceway for low and high voltage cables = 18 Nos Anchoring Belts to tie the fountain frame to the anchors and hold the fountain in place: SITC of Polyester belts of minimum 3 Ton holding capacity with Snap Hook and Buckle Cam made of GI of length depending upon the depth of the waterbody = 35 Nos Anchors to hold the fountain in place: SITC of concrete anchor blocks cast at site of 450mm x 450mm x 300mm with steel hookto be placed on the lake floor at various locations to hold the fountain in place = 35 Nos. The above description of all works to be considered as single set

CONTROL PANELS Starter Panel for Pumps x 2 No: SITC of custom made indoor type Motor Control Panels with MCB's, Contactors, Overload Relays, Single Phase Preventers, for automatic operation of pumps = 43 Pumps DMX Control panel for lights x 1 No: SITC of custom made indoor type Light Control Panel with power supplies, DMX 512 transmitter cards, MCB's ctc for automatic operation of lights = 129 lights DMX Control panel for Pumps & Solonoids x 1 No: SITC of custom made indoor type Control Panel with DXM cards, Electronic relays, Power Supplies & MCB's for automatic switching of solenoid valves and pumps = 75 Pumps / SV's Control panel for 2D Nozzles x 1 No: SITC of custom made indoor type Control Panel with Stepper Drives, DMX Relays and DMX Stepper Drivers for the automatic operation of 2D Nozzles = 6 2Ds Main Distribution Panel: Custom made indoor type Panel with MCCB's and main bus bar for supply to the above no of panels = 1 Panels. The above description of all works to be considered as single set

PANEL INTERCONNECTING CABLES & PVC DOUBLE WALL CONDUIT Wire 16mm Four Core double PVC sheathed copper cable: SITC of 16mm four core cable for connecting the Panels = 35 Rmt Wire 35mm Four Core double PVC sheathed copper cable: SITC of 35mm four core cable for connecting the Panels = 35 Rmt Wire 1 Pair (Communication Cable ) ( RS 485 , 1 Pair 24a4wg ) - DMX: SITC of DMX interconnecting cable = 50 Rmt PVC Double Wall Conduit 4": SITC of PVC Double Walled Conduit for interconnecting the cable trenches = 100 Rmt The above description of all works to be considered as single setThe above description of all works to be considered as single set

SOUND SYSTEM

Harman (JBL) / VAL Audio / QSC/ Sound System, 2 Subwoofers and 11 Main Speakers, Amplifiers, Digital Signal Processor, 2 Monitor Speakers, Cables, Stands etc: SITC of professional audio system suitable for the outdoor venue with complete accessories mounting poles etc

FOUNTAIN CONTROL SYSTEM & PROGRAMMING Fountain Show controller Hardware & Software for Musical Fountain control (Syncronorm Germany): SITC of 4 universe DMX show Server with 120GB of storage, multiple timecode options and show scheduling option = 1 Nos Computer Core i5, with 4GB graphic card SSD 240 GB, 15 inch monitor: SITC of desktop computer for operating the show = 1 Nos. Fountain Programming (Music Copyright is in client scope): Programming of the show, fountain nozzles, lights, lasers, etc = 3 Nos The above description of all works to be considered as single set

Consumables, Transportation, Maintenance & Operation Charges for 12 months: Electrical tape, cable joint waterproofing rubber & packaging of equipment for road transport & Equipment Warrenty etc.,

D. PLUMBING & SANITARY FITTINGS

supplying,installing,testing and commisioning the best quality approved make of white glazed floor mounted european water closet with inbuid porcelin cistern 6/3 LPF and wash basin for physically challenge persons (hindware -matrix -70002)with necc0esary grap railes,hinged railes for support,pan connecter bend ,checknut,stopcock etc,. colour solid seat and cover with polythene buffer and flap,CP flanges, CP bolts and nuts,brackets with nuts and boults wall flanges etc, complete ,wash basin shall include 15mm dia CP liver oprareted piller cock with waste coupling , 32mm dia CP cbottle trap with extension pipe,supporting bracket with neccesary steel to support basin 1 No,15mm CP angle valve with 450mm long CP connection pipe and CP wall flamnges all of approved make etc., complete complying with standard specification and as directed by the department officers.the quality and mak of EWC & wash basin with full se should be got approved by concern department Engineer before use on work.

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.e Engineer-in-Charge.

Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work.

supplying and fixing the best quality approved make of bip cock with C.P health faucet wall hook one metre long fixable tube,angle cock with wall flangle including cutting and making good the walls whewrever requred etc complete, complying with standerd specification and as directed by the department officers. the quality and make of health faucet should be got approved by concern department Engineer before use on work

Supplying and fixing the best quality approved make of SS heavy duty long body Tap including cutting and making good walls wherever required etc.complete,complying with standerd specification and as directed by the department officers. The quality and make of angular stop cock should be got approved by concern department engineer before use on work.

Supplying and fixing in position Mirror of size 500x450mm of approved quality and brand of size with necessary plastic back PVC frame with bottom stand of approved color with brass screws rowel plugs etc complete complying with standard specification and as directed by the Departmental officers The quality of mirror should be got approved by the Executive Engineer before use on work

Supplying,installing,testing and commissioning of approved make CONCELD STOP COCK including neccesary accessories etc,complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work.

STAINLESS STEEL SINK

CP ANGLE COCK TAP

32mm CP HEAVY DUTY BOTTLE TRAP

CP Shower Arm with Overhead Shower Rose

b) 50 mm dia

c) 75 mm dia

Supplying & fixing in position C.I.Nahini trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).

a) 110 x 75 mm dia (20 mm water seal)

Supplying and fixing in position the best quality and variety sizes PVC soil waste pipes 6Kg cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.

a) 75 mm dia(Soil Waste pipe)

b) 110 mm dia(Soil Waste pipe)

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Constructing brick masonry manhole with second sort ground moulded (Chamber burnt) bricks in CM 1:5 (one of cement, fivr of sand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate) 20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard specification.

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of UPVC pipes and specials should be got approved by Concern department Engineer before use on work.

a) 20 mm dia

b) 25 mm dia

a) 40 mm dia

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of UPVC pipes and specials should be got approved by Concern department Engineer before use on work.

a) 32 mm dia

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not less than 20 Kg / sqcm with threaded joints complete.

a) 25 mm dia

E. ELECTRICAL & CCTV CAMERA WORKS

HT RMG Panel - Supply, Installation, Testing and Commissioning of11 KV, 25 KA, 630 A, HT Outdoor Three Panel Ring Main Gear

11kV HT Outdoor RMG Panel Supply,Installation,Testing and Commissioning of OUTDOOR Weather & Dust proof Type, floor mounting, free standing type 11KV Ring Main Gear unit made out of M.S sheet steel clad dust and vermin proof with 630A Copper Busbars, Interconnections, necessary protections, Measuring Instruments, Indicating Instruments, necessary Protection Relays, CTs, PT with necessary control fuses/MCBs, Termination arrangements for Incoming and Outgoing Cable of as per EB authorities approval ,earthed cable, Terminal Blocks, Earthing, Powder coated painting, Sign writing and Base channels etc., with complete all accessories as required for satisfactory operations and as per the detailed Technical Specifications enclosed and as per TANGEDCO Requirements comprising of the following. Remote Communication and operation. 11 KV, 630 A, 25 KA Horizontal Draw out, vertical / horizontal Isolation 1 No. VCB fitted with manual / Motor operated spring charging Mechanism with 230 V AC, shunt trip coil of 110 V DC, closing coil of 110 V DC, Auxiliary Contact 8 NO + 8 NC, Mechanical ON / OFF indicator, mechanical operation counter, Automatic safety shutters, Push button and breaker position indicator including epoxy insulator - 1 set

HT Panel - Supply, Installation, Testing and Commissioning of11 KV, 25 KA, 630 A, HT Outdoor Single Panel VacCu.m Circuit Breaker complete as per specification 11 kV outdoor type Single Panel VCB l, Metal Clad, Totally Enclosed, dust vermin proof, floor mounting, free standing, horizontal/vertical isolation, draw out type, dust and vermin proof, made up of 2 mm thick CRCA sheet steel with powder coated of approved shade, with Vacuum circuit breaker of vertical/Horizontal isolation, 1500A Capacity Copper busbar generally conforming to IS : 62271-200 and section 2 of CEIG General specification for Electrical works, mounted on suitable channel iron including grouting the channels etc., as required.

HT Transformer - Supply, Installation, Testing and Commissioning of 630 KVA, 11 KV / 433 V Outdoor Oil Cooled Transformer with off Circuit

Rate shall inclusive of factory witness test as specified in the technical specification and all necessary test to satisfy the TANGEDCO/CEIG Requirements. Erection shall inclusive with complete all accessories as required for satisfactory operations and as per the detailed Technical Specifications enclosed and as per CMDA/TANGEDCO/CEIG Requirements.

Supply, Laying of 185 sq.mm. 3 core HT XLPE 11KV UG cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and Clamping of 3 core 185 Sq.mm Aluminium, HT XLPE 11 kV(E), XLPE PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and providing 11 kV (E) Outdoor cable end termination for 3 Core x 185 Sq.mm XLPE 11KV (E) - EPKT 3362 insulated HT UG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing 11 kV (E) Indoor cable end termination for 3 Core x 185 Sq.mm XLPE 11KV (E) - EPKT 3111 insulated HT UG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and Clamping of 31/2C x 400 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.

Supply and Laying of 3 1/2 x 400 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 3-1/2 x 400 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 31/2C x 400sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI Pipe of dia not less than 40mm, with copper earth plate of size 600mm x 600mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and run of 50mm x 6mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

Supply and run of 50mm x 6 mm Cu flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

FENCING YARD: OUTDOOR Fencing yard for outdoor 11kV HT Panel, Transformer area. (Plan Area) Supply and laying of Fencing details of height of 2.1 mtr with chain link mesh made of 10 SWG GI wire with mesh size of 50mm x 50mm welded to angle iron frame made of 50mm x 50mm X 5 mm size on all four sides and 1 no. horizontal intermediate member of 50mm x 50mm x 5mm welded to 25mm x 5mm flat to form 'T' section (The angle iron frame shall be fabricated in section of width not more than 1.5 mtr and assembled at site to form the required fencing). The vertical members of frame shall be extended by 75cm for erection in ground, including erections of the angle iron frames in 1:3:6 cement concrete.).

Design, supply, fixing, testing and commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed. (SUB SWITCH BOARD) Incoming : 2 Nos 400A TPN 25 kA MCCB with Changover Switch. Incomers shall have 1 set - Digital Combined meter (Having the parameters of Ammeter,Voltmeter and KWH meter). 1 set - LED type RYB,ON,OFF,TRIP indication lamps. 1 set -400 /5A CT CL 1.0 10VA Outgoings: 1 No - 250 A 25KA TPN MCCB, 1 No - 315 A 25KA TPN MCCB, 5 Nos - 63 A 16KA TPN MCCB. Note : All the Outgoing feeder shall be having 'on',off,trip' indication lamps..All switch boards shall be fabricated as per the detailed specification enclosed. Suitable size outgoing cable chamber and extra busbars should be provided for connecting the number of outgoing cables as per the schematic drawing. The board shall be fabricated for future extension of the panel board. Note:-The panel should be having provision to monitor the On, Off, trip status. BUS BAR RATING: 400A TPN 25 KA for 1 sec. Aluminium bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus. Earthing : 25 x 6mm Aluminium flat, Cable Entry & Exit : Bottom, Cable Gland Plate : 3mm thick MS sheets

Supply and fixing of 7 segment 8 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 Nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.

Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing on wall with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like MDS / Legrand make ) (Higher End)

Supply and Laying of 31/2C x 240 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.

Supply and Laying of 31/2C x 25 Sq.mm PVC armoured LTUG aluminium cable in existing trench, hume pipe, tray etc, The Rates complete including transport charges of UG cable.

Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and fixing of brass cable gland for 31/2C x 240 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 31/2C x 25 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland suitable for 4C x 10 PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 31/2C x 240 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 31/2C x 25sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 C x 10sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / Fan point (for electronic regulator) ( 5 points / Coil) Higher End

Wiring, testing and commissioning of 2Rx1.5Sq.mm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Secondary Point) with Out Switch

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and run of 4R of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC conduit pipe concealed in wall with continuous earth wire connection of 1.5 Sq.mm(22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V wire and making good of the concealed portion with suitable colour

Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC LTUG armoured cable with earth connection

Wiring with 2Rx1.5 sq.mm. (22/0.3) PVC insulated Single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 1no. 6A one way module switch and 1no. 6A 3/2 Pin module socket with module front plate with continuous earth wire connection of 1 run of 1.5 Sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Pipe 5A Plug Point ( 8 Points / Coil )

Wiring with 2Rx4sq.mm PVC insulated Single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module Plastic switch box in flush with wall with 1no. 16A one way module switch and 1no. 16A 3/2 Pin module socket with module front plate with continuous earth wire connection of 4.0Sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC Pipe 15A Power Plug Point ( 8 Points / Coil ) ( Higher End )

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 2Nos.6A two module 5 pin socket , 2 Nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 20W, 4FT LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. ( Reputed Make like : Philips / Crompton / wipro )

Supply and fixing of 18W LED 3000 K round type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 20W LED 2 ft mirror light on wall with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 3x60W Flood Light fitting on 9mtr pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Aston - 4202 & Merlin - 8322 ) - 8 x 60W

Supply and fixing of under water 12W underwater fountain light Ip68 with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (KLITE:2812 & 8205)

Supply and fixing of 50W streetLight fitting on 4.2mtr pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Navira mini - 4445 & Quadra Lighting pole-4774)

Supply and fixing of spike light 6W fitting on floor with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KL-Trioscope - 7052

Supply,installation and commissioning of 6W LED Recess fitting on wall with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work Sudo mini - 2757 -

Supply and fixing of Neon Flex LED Light 9W/Meter LED cove light in complete accessories. The rate inclusive of all taxes and transportation charges etc. (KL:3230 )

Supply and fixing of Neon Flex LED Light 9W/Meter LED Driver complete accessories. The rate inclusive of all taxes and transportation charges etc. (KL: 8198)

Supply and fixing of 6W LED Wall mounted Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:3665 Wall Dena

Supply and fixing of 12W LED Bollard Light fitting (1000mm)with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4710-Carley Square Bollard

Supply and fixing of 30W streetLight fitting on 3.0mtr pole with metal support with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (Zuchini - 4849 & Flat Lighting pole-4790)

Supply and fixing of 40W LED Wall mounted Light fitting with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. (KLITE:3652 Wall Cylin)

Supply and fixing of 18W (IP65)LED round type Surface light on ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.

Supply and fixing of 12W LED Bollard Light fitting 300mm with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work. KLITE:4710-Carley Square Bollard

Supply and Fixing of 300mm (12") sweep ( Heavy duty ) AC Exhaust fan complete with necessary wall opening and making good of the wall.,

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work

Coil Earth to Street light poles with No 8 SWG GI wire of 11.5 Mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length (75 mm to 100 mm dia) connected suitable with Hexagonel earth bolt of size 8mm to 25 mm welded on the pole at one end with a coil position fixed on the earth and etc to complete the work

Supply of First Aid Box complete with all First Aid Medicines

Supply and fixing of Shock Treatment chart with Glass frame

Supply and fixing of Danger Boards (415Volts & 230Volts)

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers

Supply and erection of '2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

Hand Gloves 11KV Grade

Earth Discharge Rod

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT /SAFETY FIRST / EQUIVALEN

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply, Installation, Testing and commissioning of 32 channel 2 SATA NVR, with 8TB Hard Disk Drive 2 Nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony.

Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,

● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand. (Make: Dahua/Panasonic)

Supply, Installation, Testing and Commissioning of 32" smart LED TV with following specifications a) Full HD 4K monitor b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator

i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3Nos m) USB -3Nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and Clamping of CAT 6 armoured cable in 50mm HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)

Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)

Supply and Fixing of Rack with Accessories -Higher end 12u Rack with fan extra for the above rack. (speaker/data/cctv)

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up and battery stand.

Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with Suitable foundation Charges.

Supply and Run of 3C X 2.5 Sq.mm insulated multistrandad flexible copper Trailing Flat/round cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour.

Supply, erection, testing, commissioning of 250KVA DG Set with Acoustic Enclosure with Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 250 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 1day capacity Litters fuel tank, 2x12V 120 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., all inclusive.

Preparation of the drawing and submission to the Chief Electrical Inspecter to Govt.of Tamilnadu ( CEIG) and other statutory authorities for commissioning the system including arranging inspection and for necessary approval & obtaning electrical safety certificate.The rate includes submission of 6 Sets of "As Built " Drawings.

Getting approval from TNEB including doCu.ment submission, load sanction, Panel inspecion, drawing approval, MRT inspection, Establishment and supervision Charges , co-ordination for charging of HT

VIJAYSREE BUILDERS (BID ID -1271979)

SRI VENKATACHALAPATHY CONSTRUCTIONS PRIVATE LIMITED (BID ID -1271470)