Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC 34 KAISER GANJ MANDI DIST MEERUT UP 250002 | MEERUT | UTTAR PRADESH | 250002 | L1 | Accepted-AOC Awarded | |
| 2 | L2₹43.4 L+₹1.4 L (3.28%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹43.4 L+₹1.4 L (3.35%)Rejected-Finance 84 POLO HILLS OPPOSITE SBI BRANCH EAST KHASI HILLS SHILLONG MEGHALAYA 793001 | EAST KHASI HILLS | MEGHALAYA | 793001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹43.8 L+₹1.8 L (4.17%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹44.2 L+₹2.2 L (5.22%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | M/S BISWA CONSTRUCTION L2 | M/s Gupta Construction L1 | M/S DEEDAR ENTERPRISE L6 | M/s B.Citymai Syiem L3 | M/S RAGHU NATH SAH L4 | S K ENTERPRISE L8 | M/S Shillong Supply Syndicate L7 | MAHINDER ELECTRICALS L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each. Including hold fasts and PCC block all as specified. | 70 | Each | 365 ₹25,550 | 350 ₹24,500 | 360 ₹25,200 | 345 ₹24,150 | 370 ₹25,900 | 410 ₹28,700 | 380 ₹26,600 | 300 ₹21,000 Lowest |
| 2.00 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exceeding 4.00 Sqm each. Including hold fasts and PCC block all as specified. | 50 | Each | 425 ₹21,250 | 400 ₹20,000 | 420 ₹21,000 | 395 ₹19,750 | 420 ₹21,000 | 480 ₹24,000 | 440 ₹22,000 | 380 ₹19,000 Lowest |
| 3.00 | Taking down Shutters of any description not exceeding 1.0 sqm for each leaf all as specified. | 10 | Each Leaf | 65 ₹650 | 50 ₹500 | 45 ₹450 | 45 ₹450 | 55 ₹550 | 60 ₹600 | 55 ₹550 | 40 ₹400 Lowest |
| 4.00 | Taking down Shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm for each leaf all as specified. | 10 | Each Leaf | 95 ₹950 | 100 ₹1,000 | 110 ₹1,100 | 110 ₹1,100 | 120 ₹1,200 | 120 ₹1,200 | 125 ₹1,250 | 90 ₹900 Lowest |
| 5.00 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified. | 70 | Square Meter | 95 ₹6,650 | 98 ₹6,860 | 100 ₹7,000 | 110 ₹7,700 | 115 ₹8,050 | 110 ₹7,700 | 115 ₹8,050 | 90 ₹6,300 Lowest |
| 6.00 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified. | 4.5 | Cubic Meter | 1,550 ₹6,975 | 1,600 ₹7,200 | 1,650 ₹7,425 | 1,500 ₹6,750 | 1,800 ₹8,100 | 1,800 ₹8,100 | 1,700 ₹7,650 | 1,400 ₹6,300 Lowest |
| 7.00 | Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. | 30 | Square Meter | 2,950 ₹88,500 | 2,800 ₹84,000 | 2,700 ₹81,000 | 2,900 ₹87,000 | 3,200 ₹96,000 | 3,000 ₹90,000 | 2,850 ₹85,500 | 2,500 ₹75,000 Lowest |
| 8.00 | Dismantling of wall/ceiling boards (fibre, pulp,insulation etc) or insulation boards/ slabs/blanket any thickness including cover fillets all as specified. | 100 | Square Meter | 55 ₹5,500 | 50 ₹5,000 | 55 ₹5,500 | 55 ₹5,500 | 55 ₹5,500 | 55 ₹5,500 | 65 ₹6,500 | 40 ₹4,000 Lowest |
| 9.00 | Supply and fix 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. | 30 | Running Meter | 2,550 ₹76,500 | 2,600 ₹78,000 | 2,800 ₹84,000 | 2,650 ₹79,500 | 2,800 ₹84,000 | 2,850 ₹85,500 | 3,000 ₹90,000 | 2,500 ₹75,000 Lowest |
| 10.00 | Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified. | 5.6 | Running Meter | 1,350 ₹7,560 | 1,250 ₹7,000 | 1,400 ₹7,840 | 1,300 ₹7,280 | 1,400 ₹7,840 | 1,400 ₹7,840 | 1,500 ₹8,400 | 1,200 ₹6,720 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Jul 2025, 6:00 pmClosed
GE I AF Shillong
GE (I) (AF) Shillong Elephant Falls Camp PO Nonglyer Shillong-793009
REPAIR AND MAINTENANCE TO JOINERY, FALSE CEILING AND MISC BNR WORKS OF MARRIED ACCOMODATION AT HQ EAC (U) AF UNDER GE (I) (AF) SHILLONG
2025_MES_716819_1
8021/25/E8
Open Tender
Civil Works
Item Rate
180 days
GE I AF SHILLONG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE I AF SHILLONG
₹80,000
Yes
10 Sept 2025
26 Jun 2025
24 Jul 2025
26 Jun 2025
17 Jul 2025
10 Jul 2025
Amount
Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each. Including hold fasts and PCC block all as specified.
Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exceeding 4.00 Sqm each. Including hold fasts and PCC block all as specified.
Taking down Shutters of any description not exceeding 1.0 sqm for each leaf all as specified.
Taking down Shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm for each leaf all as specified.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified.
Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
Dismantling of wall/ceiling boards (fibre, pulp,insulation etc) or insulation boards/ slabs/blanket any thickness including cover fillets all as specified.
Supply and fix 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified.
Demolition of cement concrete of any description and in any position complete all as specified.
Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.
Area not exceeding 2.00 sqm each
Area exceeding 2.00 sqm each
Material and labour for 75 mm thick PCC 1:3:6, type C2 with using 40 mm graded stone aggregate as in sub base, sub floor, floor and paving complete all as specified.
Material and labour for 25 mm thick PCC 1:2:4, type B0 with using 12.50 mm graded stone aggregate as in flooring finished fair and even complete all as specified and directed by Engr-in-charge.
Material and labour for 10 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finshed even and smooth without using extra cement complete all as specified.
Supply and fix second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.
Material and labour for 35 mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified.
Supply and fix 30 mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars,. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.
Supply and fix galvanised mild steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified.
Supply and fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fix powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.
Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified .
Supply and fix 4 mm thick sheet glass, ordinary quality and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.
Supply and fix 5.5 mm thick sheet glass, ordinary quality and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.
Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.
Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .
Supply and fix 100 mm long aluminium anodised barrel tower bolts of extruded section all as specified.
Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section all as specified.
Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.
Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.
Supply and fix 100 mm long aluminium alloy handles, fabricated type, anodized all as specified.
Supply and fix 150 mm long aluminium alloy handles, fabricated type, anodized all as specified.
Supply and fix 100 mm long hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
Supply and fix in repairs Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.
Material and labour for 12 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified.
Dismantling of boarding of any description and any thickness all as specified.
Supply and fix 50 mm thick second class hardwood boarding clean sawn with butt joints, with nails in any situation (except flooring and skirting) complete all as specified.
Material and labour for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified.
Material and labour for 6 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified.
Supply and fix 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.
Supply and fix 25 mm thick insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2 mm thick wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing
Supply and fix 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
Material and labour for 10 mm thick joint free premium quality light shed vitrified ceramic tiles of size 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces laid over 20 mm thick screed bed in cement mortar 1:4 inclusive dismantling of old tiles complete all as specified and directed.
Material and labour for prepration new or previously untreated wood or wood base materials of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 450 mm x 350 mm as in skirting / dado or in vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 inclusive dismantling of old tiles complete all as specified.
Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 inclusive dismantling of old tiles complete all as specified.
Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 inclusive dismantling of old tiles complete all as specified.
Supply and fix as in repairs corner glass shelf of size 300 mm radius (with brass chromium plated brackets) fixed in wall with necessary screws etc. complete all as per directed by Engineer-In-Charge.
Supply and fix as in repair brass peg set of six complete as per manufacturer instructions.
Supply and fix as in repairs CP towel ring complete all as per manufacturer instructions.
Supply and fix as in repairs CP towel rack complete all as per manufacturer instructions.
Supply and fix as in repairs, stainless steel kitchen plate rack of size 610 mm x 914 mm x 254 mm made out of 1 mm thick stainless steel sheet complete all as per manufacturer instruction.
Supply and fix as in repairs PVC toilet mirror cabinet with mirror of overall size 400 mm x 550 mm and fixed to wall complete all as per directed by Engineer-In-Charge.
Supply and fix as in repairs 20 mm dia brass chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified. Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103
Supply and fix Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified.
Supply and fix as in repairs,15 mm bore Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Parryware Cat No G0304A1/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030
Supply and fix as in repairs aluminium (die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 kg to 80 kg and fixed complete all as specified.
Supply and fix as in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.
Supply and fix as in repairs mortice loc, vertical type, 4 lever of size 100 mmm (set of two keys) including set of two handles 130 mm all as specified and directed
Supply and fix floor door stopper 140mm of aluminium alloy body and tongue, anodised with hardc drawn steel spring fixed in floor all as specified and directed
Running welding in repairs thickness of metal not exceeding 6 mm complete all as specified.
M/S BISWA CONSTRUCTION (BID ID -3356767)
M/s B.Citymai Syiem (BID ID -3361462)
M/S RAGHU NATH SAH (BID ID -3361591)
MAHINDER ELECTRICALS (BID ID -3361750)
M/S DEEDAR ENTERPRISE (BID ID -3361384)
M/S Shillong Supply Syndicate (BID ID -3360312)
S K ENTERPRISE (BID ID -3361656)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .