Construction of 220/132KV, 2X160 MVA AIS Substation at Morigaon along with associated transmission lines, (Package P-II-E)

Supply_Sub_Morigaon AIS

Supply_LILO

Supply_132kV_Line Shifting

Supply_220kV_TSAT

ETC_ Sub_Morigaon

ETC_Line_LILO

ETC_ 132kV_Line Shifting

ETC_ 220kV_TSAT

F&I_ Sub_Morigaon

F&I_Line_LILO

F&I_ 132kV_Line Shifting

F&I_220kV_TSAT

Civil_Works_Morigaon

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-Supply of Items for 220/132kV Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Isolators and accessories as per specification.

Supply of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Tandem Isolator.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

36kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.

Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Tandem Isolator.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

36kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.

Supply of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required.

220kV, 2x120kN double tension string suitable for Single AAAC Zebra conductor.

220kV, 2x120kN double suspension string suitable for Twin MOOSE conductor.

220kV, 2x160kN double tension string suitable for Twin MOOSE conductor.

132kV, 2x120kN double suspension string suitable for Twin MOOSE conductors

132kV, 2x160kN double tension string suitable for Twin MOOSE conductors

132kV, 2x90kN double suspension string suitable for Twin Zebra conductors

132kV, 2x120kN double tension string suitable for Twin Zebra conductors

132kV, 90kN tension string suitable for Single Panther conductor.

132kV, 70kN suspension string suitable for Single Panther conductor.

Conductors, Clamp Connectors as per specification.

ACSR Moose Conductor

ACSR Zebra Conductor

Clamps, Connectors as per site requirement and EKD

Bus post insulator as per specification.

Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required.

245KV, BPI

145KV, BPI

Suply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required.

245KV, BPI

145KV, BPI

Supply of Station Service Transformer (Energy efficiency level-3) and accessories as per specification.

500 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors.

440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 500KVA Station Service Transformer

33kV DO fuse for 500kVA station service transformer complete with all accessories and support structures.

Surge Arrester as per spefication

Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required.

216KV, 10kA, LA

120kV, 10kA, LA

30kV, 10kA, LA

Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required.

216KV, 10kA, LA

120kV, 10kA, LA

30kV, 10kA, LA

CVT and Wave Trap as per specification.

Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required.

220kV, 4400pF, 3 Wdg CVT.

220KV, 1250A Wave Trap.

Supply of CVT and Wave Trap pipe/Lattice support structure, foundation bolts, nuts bolts etc as required.

220kV, 4400pF, 3 Wdg CVT.

220KV, 1250A Wave Trap.

Outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required as per specification.

245kV, 3-phase, Single Pole, 3150A, 50kA for 3 sec.

245kV, 3-phase, Gange Operated, 3150A, 50kA for 3 sec.

145kV, 3-phase, Gange Operated, 3150A, 40kA for 3 sec.

Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required as per specification.

220kV BMK

132kV BMK

Instrument Transformer (CT & PT) as per specification.

Supply of CT & PT alongwith junction box, clamps & connectors and other accessories as required.

220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT for line bay

220kV, 600-300/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1600-800/1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for Bus coupler bay

132kV, 800-600/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1-ph Potential Transformer (3 wdg, 0.2-3P-3P)

Supply of CT/PT support structures, foundation bolts, nuts bolts etc as required.

220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT for line bay

220kV, 600-300/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1600-800/1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for Bus coupler bay

132kV, 800-600/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1-ph Potential Transformer (3 wdg, 0.2-3P-3P)

SUPPLY of Following Lattice type Gantry Structure with bolt , different type of G.I HT Nuts & Bolts, washer, spring washer including accessories as per technical specifications. All Supply should confirm to the Technical Specification.

220 kV Column (C1) with Peak

220 kV Beam (B1)

220kV Column (C2) without Peak

132 kV Column (C3)

132 kV Beam (B2)

Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required.

220kV AIS

220kV Bus Bar CRP

220kV Line CRP with Line Differential (distance as backup)

220/132/33kV ICT CRP (160MVA)

220kV Bus Coupler CRP

132kV AIS

220/132/33kV Transformer CRP (160MVA)

Relevant software for relay configuration & setting, maintenance etc.

Relay Maintenance Tool Kit as per bid document

Complete Substation System Automation System (As per specification )

Station HMI (Main, Redundant and Metering) with Industrial PC

Maintenance HMI (DR Workstation) with Industrial PC

Gate way with PLCC and Fibre Optic Modem and Panel

SAS Inverter (5kVA)

Laser MFP Printer

GPS Clock System

16 port Ethernet Switch

All interphase equipment for Gateway to SLDC

VDU 75 inch

Aux BCU Panel as per scheme requirement

All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement

Station Ethernet Switch

SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.

Red Box

Annual Maintenance Contract (AMC) as per bid

Integration of all existing CRP, station auxiliary etc. at Baghjap with new SAS

160MVA, 220/132/33kV, ONAN/ONAF/ODAF or ONAN/ONAF1/ONAF2, ICT along with all accessories and below: (including terminal connectors and other acessories as per technical specification

160 MVA, 220/132/33kV, Three phase Transformer with OLTC & Oil

RTCC Panel with AVR (TMS)

10% Extra OIL for each transformer

Rail track for transformer

Pulling block for transformer

Trasformer condition monitoring devices (Oil & winding temperature monitoring system (FO based), Online DGA (Multi gas), Online insulating drying system, Maintainence free breather)

Battery & Battery Chargers, DCDB & ACDB as per specification

110V VRLA Battery 600AH

110V, Dual Float Cum Boost Chargers for 110V Battery 300A

110V, DCDB

48V VRLA type Battery Bank 300AH

48V, Dual Float cum Boost Chargers SMPS based for 48V Battery 60A

48V, DCDB

Main ACDB

Sub ACDB

MLDB with 415V/415V, 100kVA isolation transformer

ELDB with 415V/415V, 50kVA isolation transformer

HVAC DB

MCBDB as per site requirement

Power Line Carrier Communication Equipments

HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)

Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 240 km) for 220kV

IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 240 km(220kV)

LMU and LMDU

CAT 6 armoured cable.

2 wire telephone set

Audio Cable

XLPE Armoured, LT Power Cable (1.1kV grade)

2C, 6sqmm Cu

4C, 16sqmm Cu

3.5C, 35sqmm Al

3.5C, 150sqmm Al

3.5C, 70sqmm Al

3.5C, 400sqmm Al

Cable supports and other cable accessories

Others ( Cable for Fire Fighting, Illumination etc)

PVC Armoured Cu LT Control Cable (1.1 kV grade)

4C, 2.5sqmm

7C, 2.5sqmm

12C, 2.5sqmm

19C, 2.5sqmm

Cable supports and other cable accessories

Others ( Cable for Fire Fighting, Illumination etc)

Earthing

Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc as per technical specification and approved drawing/calculation

75x12 mm Dia GS (HDG) Flat for Main Earthmat and satellite/auxiliary earthmat

Earthing Conductor: 75x12 mm Dia GS (HDG) Flat For Riser From The Burial Earth Mat To Equipment,Structure, Fence Etc)

Earthing Conductor: 75X 12 Mm GS (HDG) Flat For equipment and structure earthing

Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc)

Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.

Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.

75X10mm, 65x12mm,65x10mm,50x8 mm, 50x6 mm and 25x6mm GS Flat as per site requirement

GI Shield 7/3.66 wire/ lightining spikes for column with peak column and LM including shield wire clamps

Other Earthing Accessories ( required for complete earthing of the entire switchyard and the buildings)

Fire Alarm & Detection including all accessories as per specification

Fire Alarm & Detection system for Control Room Building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc.

Trolley mounted portable fire exinguishers (Dry powder chemical type) for transformers ( 25 Kg , DCP Type)

Portable and wheel/trolley mounted Fire Extinguishers for Control room (5kg X 3 nos. and 2kg X 3 nos.), Guard room (Security Booth) (2kg X 3Nos), Store building (2kg X 5 nos), Open store shed (2kg X 4Nos) as per specification.

Dry powder chemical type 5 kg. For 500 kVA transformer

Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification.

Hydrant system along with pumping arrangement & associated Civil works for fire protection system

HVWS system (automatic emulsifier and manual hydrant point both) for 160 MVA ICT-2 no.

NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 2 Nos ICT

Lighting System

Outoor Lighting as per technical speceification

Public Addressing System & CCTV complete with all accessories as per specification.

Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, open store shed, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc.

Lightning protection system (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation.

Miscellaneous item(like MS Channel,Angle, 8 mm Chequered plate,MS Grill plate,Switchyard and Bay Identification Name board, Anchor fastner and Display for Overall single line diagram photo with frame.etc…as per site requirement and for overall completion of the project).

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-Supply of Line Items for 220kV Sonapur-Karbi Langpi D/C LILO at Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification. 220kV Towers and 220kV Multi circuit towers shall be designed to suit Twin AAAC Zebra conductor;

Quad circuit Tower C+0

Quad circuit Tower C+6

Quad circuit Tower D+6

Quad circuit Tower D+15

Adjustable Stub setting template

D type

Quad circuit C type

Quad circuit D type

Galvanized iron nuts & bolts for above template

D type

Quad circuit C type

Quad circuit D type

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/4.00 mm All Aluminium Alloy Conductor Zebra

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables

96 Fibre (DWSM) OPGW fibre optic cable

96 Fibre Optic Approach Cable (DWSM96F)

OPGW HARDWARE/FITTINGS AND TERMINATIONS

OPGW double tension pass through assembly

OPGW Double Tension Assembly for splicing location c/w pre-formed armour rods and tower bond clamps

OPGW Tension Single Dead-end Set for termination/ run-in c/w pre-formed armour rods and tower bond clamps

OPGW Vibration Damper c/w pre-formed armour rods

Down Lead Clamp

OPGW optical Splice/Joint Kit (96 fibre) including junction box (min 4 mm thick)

Loop Bracket

FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails

Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.

Others (For any additional Hardware and Fittings, tenderer to specify)

LONG ROD INSULATOR

Long rod insulator for 220 KV TL-90 KN (Suspension insulator)

Long rod insulator for 220 KV TL-120 KN (Tension insulator)

HARDWARE FITTINGS

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single "I" Suspension String (Pilot)

Hardware fittings for 220kV AC with AAAC ‘ZEBRA Conductor-Double Tension String 120X2 kN

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single Tension

Tower earthing accessories

40 mm dia, 3 mtr long GS pipe electrode (driven) with test link

50x6 mm GS flat as required

Other earthing accessories like GI steel wires, lugs, etc

Design Services

Design services for two types of Quad Citrcuit towers suitable for 96F OPGW (Design and type test)

GI Shield wire including shield wire clamps for tower peaks without OPGW

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-Supply of Line Items for shifting of 132kV Sonapur-Morigaon D/C line at Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/3.15 mm All Aluminium Alloy Panther Conductor

7/3.66 mm GI sheild/earth wire

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

LONG ROD INSULATOR

Long rod insulator for 132 KV TL-70 KN (Suspension insulator)

Long rod insulator for 132 KV TL-90 KN (Tension insulator)

HARDWARE FITTINGS

Hardware fittings for 132kV AC with AAAC ‘Panther Conductor-Single "I" Suspension String (Pilot)

Hardware fittings for 132kV AC with AAAC ‘Panther Conductor-Single Tension

Tower earthing accessories

40 mm dia, 3 mtr long GS pipe electrode (driven) with test link

50x6 mm GS flat as required

Other earthing accessories like GI steel wires, lugs, etc

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-Supply of Line Items for 220kV Morigaon-TSAT D/C (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification. 220kV Double circuit towers shall be designed to suit Twin AAAC Zebra conductor;

Adjustable Stub setting template

B type

C type

D type

Galvanized iron nuts & bolts for above template

B type

C type

D type

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/4.00 mm All Aluminium Alloy Conductor Zebra

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables

96 Fibre (DWSM) OPGW fibre optic cable

96 Fibre Optic Approach Cable (DWSM96F)

OPGW HARDWARE/FITTINGS AND TERMINATIONS

OPGW double tension pass through assembly

OPGW Double Tension Assembly for splicing location c/w pre-formed armour rods and tower bond clamps

OPGW Tension Single Dead-end Set for termination/ run-in c/w pre-formed armour rods and tower bond clamps

OPGW Vibration Damper c/w pre-formed armour rods

Down Lead Clamp

OPGW optical Splice/Joint Kit (96 fibre) including junction box (min 4 mm thick)

Loop Bracket

FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails

Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.

Others (For any additional Hardware and Fittings, tenderer to specify)

LONG ROD INSULATOR

Long rod insulator for 220 KV TL-90 KN (Suspension insulator)

Long rod insulator for 220 KV TL-120 KN (Tension insulator)

HARDWARE FITTINGS

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single "I" Suspension String (Pilot)

Hardware fittings for 220kV AC with AAAC ‘ZEBRA Conductor-Double Tension String 120X2 kN

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single Tension

Tower earthing accessories

40 mm dia, 3 mtr long GS pipe electrode (driven) with test link

50x6 mm GS flat as required

Other earthing accessories like GI steel wires, lugs, etc

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-ETC of Items for 220/132kV Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Erection, Testing and commissioning of Isolators

Erection of Isolator mounting structure including contsruction of foundation and supply of all foundation materials and labour

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Tandem Isolator.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

36kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.

Erection Testing and Commissioning of Isolators with all accessories, laying and termination of LT power & control cables, fitting fixing of clamps and jumpers etc. as required.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Tandem Isolator.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

36kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.

Hoisting and erection of hardware fittings complete set with nuts bolts, clamps and other accessories as required and stringing of Bus/conductor/jumpers as required.

220kV, 2x120kN double tension string suitable for Single AAAC Zebra conductor.

220kV, 2x120kN double suspension string suitable for Twin MOOSE conductor.

220kV, 2x160kN double tension string suitable for Twin MOOSE conductor.

132kV, 2x120kN double suspension string suitable for Twin MOOSE conductors

132kV, 2x160kN double tension string suitable for Twin MOOSE conductors

132kV, 2x90kN double suspension string suitable for Twin Zebra conductors

132kV, 2x120kN double tension string suitable for Twin Zebra conductors

132kV, 90kN tension string suitable for Single Panther conductor.

132kV, 70kN suspension string suitable for Single Panther conductor.

ACSR Moose Conductor

ACSR Zebra Conductor

Clamps, Connectors as per site requirement and EKD

Erection and Testing Commissioning of Bus post insulator including support structures, clamp connectors,and other accessories as required.

Erection of BPI mounting structures including contsruction of foundation and supply of all foundation materials and labour

245KV, BPI

145KV, BPI

Erection, Testing & Commissioning of 1 phase Solid core bus post insulator including clamp connectors and other accessories as required.

245KV, BPI

145KV, BPI

Erection Testing and Commissioning of Station Service Transformer, PRP (with structure, if applicable) and its accessories as below including laying and termination of LT power and control cables

500 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors.

440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 500KVA Station Service Transformer

33kV DO fuse for 500kVA station service transformer complete with all accessories and support structures.

Erection Testing & Commissioning of Surge Arrester

Erection of LA mounting structure including contsruction of foundation and supply of all foundation materials and labour

216KV, 10kA, LA

120kV, 10kA, LA

30kV, 10kA, LA

Erection, Testing & Commissioning of Surge Arrester alongwith erection of mounting structure, Including fitting and fixing of all accessories, clamps and connectors etc complete.

216KV, 10kA, LA

120kV, 10kA, LA

30kV, 10kA, LA

Erection Testing & Commissioning of CVT and Wave Trap

Erection of CVT mounting structure including contsruction of foundation and supply of all foundation materials and labour

220kV, 4400pF, 3 Wdg CVT.

220KV, 1250A Wave Trap.

Erection Testing & Commissioning of CVT and Wave Trap alongwith erection (for CVT), of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc.

220kV, 4400pF, 3 Wdg CVT.

220KV, 1250A Wave Trap.

Erection Testing & Commissioning of Circuit Breaker (Outdoor AIS) alongwith erection of mounting structures, laying and termination of LT power and control cables including fitting and fixing of all accessories, clamps and connectors and including contsruction of foundation and supply of all foundation materials and labour complete.

245kV, 3-phase, Single Pole, 3150A, 50kA for 3 sec.

245kV, 3-phase, Gange Operated, 3150A, 50kA for 3 sec.

145kV, 3-phase, Gange Operated, 3150A, 40kA for 3 sec.

Erection Testing & Commissioning of Bay Marshalling Kiosk alongwith structure including laying and termination of LT power and control cables, construction of foundation alongwith supply of all foundation materials and labour as required.

220kV BMK

132kV BMK

Erection Testing & Commissioning of Instrument Transformer (CT & PT)

Erection of Instrument Transformer (CT & PT) mounting structure including contsruction of foundation and supply of all foundation materials and labour

220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT for line bay

220kV, 600-300/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1600-800/1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for Bus coupler bay

132kV, 800-600/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1-ph Potential Transformer (3 wdg, 0.2-3P-3P)

Erection Testing & Commissioning of Instrument Transformer (CT & PT) alongwith erection of Junction box, laying and termination of cables. Including fitting and fixing of all accessories, clamps and connectors etc complete.

220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT for line bay

220kV, 600-300/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1600-800/1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for Bus coupler bay

132kV, 800-600/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1-ph Potential Transformer (3 wdg, 0.2-3P-3P)

Concreting of Gantry foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.Also provide 300 mm boulder soiling below the foundation

220 kV Column (C1)

220kV Column (C2)

132 kV Column (C3)

Erection of following Gantry tower type galvanised steel s with bolts different type of GI HT Nuts & Bolts, washers for the towers, all accessories, tower superstructure complete including step bolts

220 kV Column (C1) with Peak

220 kV Beam (B1)

220kV Column (C2) without Peak

132 kV Column (C3)

132 kV Beam (B2)

Erection Testing & Commissioning and installation of Control, Relay & Protection Panels (Simplex Type) including laying and termination of LT power and control cables

220kV AIS

220kV Bus Bar CRP

220kV Line CRP with Line Differential (with Distance as backup)

220/132/33kV ICT CRP (160MVA)

220kV Bus Coupler CRP

132kV AIS

220/132/33kV Transformer CRP (160MVA)

Existing 132 kV Line CRP (Baghjap-Sonapur Line 1 & 2)

Complete Substation System Automation System (As per specification )

Station HMI (Main, Redundant and Metering) with Industrial PC

Maintenance HMI (DR Workstation) with Industrial PC

Gate way with PLCC and Fibre Optic Modem and Panel

SAS Inverter (5kVA)

Laser MFP Printer

GPS Clock System

16 port Ethernet Switch

All interphase equipment for Gateway to SLDC

VDU 75 inch

Aux BCU Panel as per scheme requirement

All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement

Station Ethernet Switch

SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.

Red Box

Integration of all existing CRP, station auxiliary etc at Baghjap with new SAS

Erection, testing and commissioning of 160MVA, 220/132/33 kV, ONAN/ONAF/ODAF or ONAN/ONAF1/ONAF2, ICT and all accessories, terminal connectors as per technical specification including laying and termination of LT power and control cables and other signalling cables as required.

160 MVA, 220/132/33kV, Three phase Transformer with OLTC & Oil

RTCC Panel with AVR (TMS)

Rail track for transformer

Pulling block for transformer

RTCC Panel with AVR (TMS)

Trasformer condition monitoring devices (Oil & winding temperature monitoring system (FO based), Online DGA (Multi gas), Online insulating drying system, Maintainence free breather)

Erection, Testing & Commissioning of Battery & Battery Chargers, DCDB & ACDB as per specification including laying and termination of LT power and control cables as required.

110V VRLA Battery 600AH

110V, Dual Float Cum Boost Chargers for 110V Battery 300A

110V, DCDB

48V VRLA type Battery Bank 300AH

48V, Dual Float cum Boost Chargers SMPS based for 48V Battery 60A

48V, DCDB

Main ACDB

Sub ACDB

MLDB with 415V/415V, 100kVA isolation transformer

ELDB with 415V/415V, 50kVA isolation transformer

HVAC DB

MCBDB as per site requirement

Erection, Testing & Commissioning of Power Line Carrier Communication Equipments including laying and termination of LT power and control cables

HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)

Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 240 km) for 220kV

IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 240 km(220kV)

LMU and LMDU

CAT 6 armoured cable.

2 wire telephone set

Audio Cable

Installation & Testing of complete Earthing system as per technical specification.

Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc. as required.

75x12 mm Dia GS (HDG) Flat for Main Earthmat and satellite/auxiliary earthmat

Earthing Conductor: 75x12 mm Dia GS (HDG) Flat For Riser From The Burial Earth Mat To Equipment,Structure, Fence Etc)

Earthing Conductor: 75X 12 Mm GS (HDG) Flat For equipment and structure earthing

Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc)

Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.

Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.

75X10mm, 65x12mm,65x10mm,50x8 mm, 50x6 mm and 25x6mm GS Flat as per site requirement

Soil Resistivity Test And Soil Treatment As And When Required

Separate Earthing For control room building, fencing etc. with earth electrodes, GS earthing conductors etc. complete with all respects

GI Shield 7/3.66 wire/ lightining spikes for column with peak column and LM including shield wire clamps

Other Earthing Accessories ( required for complete earthing of the entire switchyard and the buildings)

Installation and Testing & Commissioning of Fire Alarm & Detection including laying and termination of LT power and control cables

Fire Alarm & Detection system for Control Room Building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Cabling, ISOLATING MODULE etc.

Fire fire fighting system (sprinkler system) for control room building as per requirement

Erection and Testing & Commissioning of Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including laying and termination of LT power and control cables

Hydrant system along with pumping arrangement & associated Civil works for fire protection system

HVWS system (automatic emulsifier and manual hydrant point both) for 2 Nos 160 MVA ICT

NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 2 Nos ICT

Lighting System

Outoor Lighting

Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, open store shed, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc.

Lightning protection system (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) along with foundation for complete substation

Miscellaneous item(like MS Channel,Angle, 8 mm Chequered plate,MS Grill plate,Switchyard and Bay Identification Name board, Anchor fastner and Display for Overall single line diagram photo with frame.etc…as per site requirement and for overall completion of the project).

Works related to dismantaling and shifting of existing substation equipments and buildings

De-stringing of panther Conductor as per site requirement and shifting the same to existing store building

Dismantling and shifting of 33kV, 11kV and LT lines and cables as per site requirement for extention of switchyard

Shifting of all the spare materials, store materials and other scrap items as per site requirement

Shifting & ETC of all the bay equipments from existing 132kV Baghjap-Sonapur-1 & 2 to new bay location

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-ETC of 220kV Sonapur-Karbi Langpi D/C LILO at Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Erection of following type tested lattice type galvanised steel suspension/Angle tower with stubs and cleats, different type of GI HT Nuts & Bolts, washers for the towers, hangers and all accessories, tower superstructure complete including step bolts

DD+0 (4 Nos)

DD+9 (2 Nos)

DD+25 (4 Nos)

Quad circuit Tower C+0 (2 Nos)

Quad circuit Tower C+6 (5 Nos)

Quad circuit Tower D+6 (7 Nos)

Quad circuit Tower D+15 (4 Nos)

Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc.

Quad circuit Tower C+0

Quad circuit Tower C+6

Quad circuit Tower D+6

Quad circuit Tower D+15

Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.Also provide 300 mm thick boulder soiling below foundation

For D+0 Type Tower

(i) Fully Submerged Type

For D+9 Type Tower

(i) Fully Submerged Type

For D+25 Type Tower

(i) Fully Submerged Type

. For Quad circuit Tower C+0 Type Tower

(i) Fully Submerged Type

. For Quad circuit Tower C+6 Type Tower

(i) Fully Submerged Type

For Quad circuit Tower D+6 Type Tower

(i) Fully Submerged Type

For Quad circuit Tower D+15 Type Tower

(i) Fully Submerged Type

Construction of cast in situ RCC Caisson foundation for 220 kV tower of inner dia 1200 mm and outer dia 1400 mm for tower foundation as per approved drawing and technical specifications including sinking of the Caisson through all strata of soil (clay, sand, silt, gravel, rock etc.) upto the depth of approved drawing, filling the caisson with M20 concrete, dewatering, carriage of material to work site, site preparation to facilitate construction work and storing of tools and materials, transportation, batching, mixing, placing, protection of work site and adjacent properties, shuttering, shoring, supply of all materials, equipment, excavation, head loading, back filling etc. complete inclusive of cost of cement and reinforcement steel etc. complete as per drawing & specifications. (Payment will be made as per actual sinking length of Caisson.)

For D+0 Type Tower

(i) Cassion Type

For D+9 Type Tower

(i) Cassion Type

For D+25 Type Tower

(i) Cassion Type

Providing, driving with hydralic piling rigs with power unit and installing driven cast-in-situ reinforced cement concrete piles of grade M25 including the cost of reinforcement steel, cost of boring with temporary guide casting bentonite solution (length of the pile for payment shall be measured from the Ground Level). The pile top should be chipped off to remove laitance concrete above cut off level 0.75m from the top of the pile (no additional payment shall be done for latience concrete and its removal). The unit rate should include excavation, dewatering, socketing, anchoring (if required), backfilling, form work for placing plain or reinforced cement concrete, supply & providing MS liner of 6 mm thick in piles through out the lenght from the Ground Level, necessary labour, materials, plants, tools and tackles and mobilization of piling rig including preparation of work space, approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work and construction and supply of all materials & labours of temporary island/platform to faciallitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing. (Payment will be made as per actual length of the piles executed)

1200 mm diameter R.C.C vertical bored pile upto 12 m from ground level

For D+0 Type Tower

(i) Pile foundation Type

For D+9 Type Tower

(i) Pile foundation Type

For D+25 Type Tower

(i) Pile foundation Type

Construction of cast in situ RCC Caisson foundation for 220 kV tower of inner dia 1700 mm and outer dia 2000 mm for tower foundation as per approved drawing and technical specifications including sinking of the Caisson through all strata of soil (clay, sand, silt, gravel, rock etc.) upto the depth of approved drawing, filling the caisson with M20 concrete, dewatering, carriage of material to work site, site preparation to facilitate construction work and storing of tools and materials, transportation, batching, mixing, placing, protection of work site and adjacent properties, shuttering, shoring, supply of all materials, equipment, excavation, head loading, back filling etc. complete inclusive of cost of cement and reinforcement steel etc. complete as per drawing & specifications. (Payment will be made as per actual sinking length of Caisson.)

For Quad circuit Tower C+0 Type Tower

(i) Cassion Type

For Quad circuit Tower C+6 Type Tower

(i) Cassion Type

For Quad circuit Tower D+6 Type Tower

(i) Cassion Type

For Quad circuit Tower D+15 Type Tower

(i) Cassion Type

Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km of line.

Grounding of towers with 3 metre long 40 mm dia G I pipe along with 50x6 GI flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification.

Painting of towers with bituminous paints of approved quality up to 5 metres from ground level including the cost of paints.

Erection of Danger plates. (1 no per tower)

Erection of Phase plates. (6 nos per tower as required)

Erection of Number plates. (1 no per tower)

Erection of Bird guard. (6 nos per tower as required)

Erection of anti climbing device (1 set per tower)

Erection of Circuit Plate

Check Survey as per Specification

OPGW cable & characteristic

Stringing of 96 Fibre (DWSM)OPGW Fibre Optic cable in live line condition including transportation and distribution of OPGW and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line

Installation of Hardware set for above 96 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, tension double end set for splice location, vibration dampers, earthing clamps, down lead clamps, in-line spice enclosures etc.

Joint box (96 Fibre) (min 4 mm thick)

Installation of FODP

FODP 96F : Indoor Type, rack mounted with FCPC coupling and pig tails

Fibre Optic approach cable (DWSM 96F)

Installation of 96 Fibre (DWSM) Fibre Optic approach cable

Installation of hardware set for above 96 Fibre, Fibre Optic Approach Cable ties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-ETC Line Items for shifting of 132kV Sonapur-Morigaon D/C line at Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Dismentaling and destringing of 3 Nos of 132kV D/C tower including dismentaling of foundation and removal & disposal of unserviceable materials outside campus as per site requirment and storage of tower matterial at location as per instruction of AEGCL

SUPPLY & Erection of 132kV D/C DD type Monopole BXA@15 m for DD+0 and BXA@22m for DD+6 type Monopole including foundation bolt,hardware fitting and all accessories, tower super structure complete .All Supply should confirm to the Technical Specification. 132kV Double circuit Monopole towers shall be designed to suit single AAAC Panther conductor;

Monopole BXA@15 m for DD+0

Monopole BXA@20m for DD+6

Design and construction of Cassion foundation for 132 kV D/C monopole tower including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.

Monopole BXA@15 m for DD+0

Monopole BXA@20m for DD+6

Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km of line.

Grounding of towers with 3 metre long 40 mm dia G I pipe along with 50x6 GI flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification.

Painting of towers with bituminous paints of approved quality up to 5 metres from ground level including the cost of paints.

Erection of Danger plates. (1 no per tower)

Erection of Phase plates. (6 nos per tower as required)

Erection of Number plates. (1 no per tower)

Erection of Bird guard. (6 nos per tower as required)

Erection of anti climbing device (1 set per tower)

Erection of Circuit Plate

Check Survey as per Specification

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-ETC of 220kV Morigaon-TSAT D/C (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Erection of following type tested lattice type galvanised steel suspension/Angle tower with stubs and cleats, different type of GI HT Nuts & Bolts, washers for the towers, hangers and all accessories, tower superstructure complete including step bolts

Welding of all nuts & bolts up to the bottom cross arm level including all charges of transportation, materials etc.

Concreting of foundation including all Labour, materials, equipment, excavation shuttering, head loading, back filling etc complete for handling, transportation, batching, mixing, placing, levelling, curing etc complete inclusive of cost of cement and reinforcement steel.Also provide 300 mm thick boulder soiling below foundation

For B+3 Type Tower

(i) Fully Submerged Type

For B+6 Type Tower

(i) Fully Submerged Type

For D+3 Type Tower

(i) Fully Submerged Type

For D+6 Type Tower

(i) Fully Submerged Type

For D+12 Type Tower

(i) Fully Submerged Type

For D+25 Type Tower

(i) Fully Submerged Type

Construction of cast in situ RCC Caisson foundation for 220 kV tower of inner dia 1200 mm and outer dia 1400 mm for tower foundation as per approved drawing and technical specifications including sinking of the Caisson through all strata of soil (clay, sand, silt, gravel, rock etc.) upto the depth of approved drawing, filling the caisson with M20 concrete, dewatering, carriage of material to work site, site preparation to facilitate construction work and storing of tools and materials, transportation, batching, mixing, placing, protection of work site and adjacent properties, shuttering, shoring, supply of all materials, equipment, excavation, head loading, back filling etc. complete inclusive of cost of cement and reinforcement steel etc. complete as per drawing & specifications. (Payment will be made as per actual sinking length of Caisson.)

For C+6 Type Tower

(i) Cassion Type

For D+9 Type Tower

(i) Cassion Type

For D+12 Type Tower

(i) Cassion Type

For D+25 Type Tower

(i) Cassion Type

Providing, driving with hydralic piling rigs with power unit and installing driven cast-in-situ reinforced cement concrete piles of grade M25 including the cost of reinforcement steel, cost of boring with temporary guide casting bentonite solution (length of the pile for payment shall be measured from the Ground Level). The pile top should be chipped off to remove laitance concrete above cut off level 0.75m from the top of the pile (no additional payment shall be done for latience concrete and its removal). The unit rate should include excavation, dewatering, socketing, anchoring (if required), backfilling, form work for placing plain or reinforced cement concrete, supply & providing MS liner of 6 mm thick in piles through out the lenght from the Ground Level, necessary labour, materials, plants, tools and tackles and mobilization of piling rig including preparation of work space, approach road, dewatering, arrangement of electricity, jungle clearing, earth filling and making all arrangement for completion of the work and construction and supply of all materials & labours of temporary island/platform to faciallitate the construction of foundation including platform for storage of construction materials such as stone chips, sand, cement, steel reinforcement bar, mixture machines, tools & plants all foundation materials keeping & mixing. (Payment will be made as per actual length of the piles executed)

1200 mm diameter R.C.C vertical bored pile upto 12 m from ground level

For B+0 Type Tower

(i) Pile Foundation Type

For B+3 Type Tower

(i) Pile Foundation Type

For D+3 Type Tower

(i) Pile Foundation Type

Stringing of power conductors including transportation from Stores and distribution of conductors and accessories to sites and laying, stringing, tensioning , clamping, jointing, jumpering and hoisting of insulators complete including cost of all fittings and accessories not specifically mentioned elsewhere per route Km of line.

Grounding of towers with 3 metre long 40 mm dia G I pipe along with 50x6 GI flat, including cost of all materials, such as GI pipes, GI bolts & nuts and washer, salt, coke etc as per Specification.

Painting of towers with bituminous paints of approved quality up to 5 metres from ground level including the cost of paints.

Erection of Danger plates. (1 no per tower)

Erection of Phase plates. (6 nos per tower as required)

Erection of Number plates. (1 no per tower)

Erection of Bird guard. (6 nos per tower as required)

Erection of anti climbing device (1 set per tower)

Erection of Circuit Plate

Check Survey as per Specification

OPGW cable & characteristic

Stringing of 96 Fibre (DWSM)OPGW Fibre Optic cable in live line condition including transportation and distribution of OPGW and accessories to site and laying, stringing, tensioning , clamping, jointing , complete including all fittings and accessories not specifically mentioned elsewhere per route Km of line

Installation of Hardware set for above 96 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories like suspension assembly, tension assembly, dead end tension assembly at line terminations, tension double end set for splice location, vibration dampers, earthing clamps, down lead clamps, in-line spice enclosures etc.

Joint box (96 Fibre) (min 4 mm thick)

Installation of FODP

FODP 96F : Indoor Type, rack mounted with FCPC coupling and pig tails

Fibre Optic approach cable (DWSM 96F)

Installation of 96 Fibre (DWSM) Fibre Optic approach cable

Installation of hardware set for above 96 Fibre, Fibre Optic Approach Cable ties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-Civil Works. (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

CIVIL WORK (As per technical specification)

Soil Investigation

Site Clearance including necessary excavation, tree cutting, vegetation and removal of stumps or any other obstacle, disposal of unserviceable materials outside campus including dismentaling existing gentry/tower structure and foundtaion as per site requirment

Site Preparation : Earthfilling and compaction

Dismantling of existing building, boundary wall, or any other existing structure

Construction of Boundary Wall with retaining wall

With earthfilling less than 2m

With earthfilling more than 2m

Construction of Brick Boundary Wall

Buildings (including All services i.e. electrical, indoor lighting, indoor cable trench for CRB, internal water supply, sanitary works and furniture complete)

G+2 Control Room Building with pile foundation

Store Building

Open store yard

Security booth

Water supply system

Supply and installation of Deep tubewell, with appropriate depth required to reach aquifer with PVC casing pipe (200 mm diameter minimum), 3 HP submersible mortor pump, 40 mm diameter CPVC column pipe, one unit RCC (M-25 grade) Slow Sand Filter (Capacity 10,000 Ltr/hr) along with RCC (M-25 grade) reservoir 600 mm above FGL (Capacity 35,000 Ltr) Supply and Installation of distribution network with CPVC pipe of 40 mm diameter and 25 mm diameter for connecting to Overhead tank of all buildings.

Construction of Transformer pad for 220/132kV, 160MVA Transformer with oil pit (suitable for 200 MVA) with pile foundation including supply of all foundation materials and labour

Construction of 500KVA, 33/0.4KV Station Transformer pad including supply of all foundation materials and labour

Construction of burnt oil pit connecting 2 tranformer foundations and including supply of all foundation materials and labour

Fire Protection Wall with pile foundation including supply of all foundation materials and labour

Construction of cable trench as per technical specification including supply of all foundation materials and labour

Type-A

Type-B

Type-C

Type-D

HDPE pipe of 100 mm dia

Road crossing cable trech for A type (8.0m)

Drain

Storm Water Drain

Sump Pit with 2 HP electric motor pump set

Antiweed treatment

PCC in Switchyard

Stone Spreading(Gravelling) in switchyard

Security Fencing

Main gate

Roads (Inter locking Concrete Block Pavement (ICBP) Block Road)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-F&I of Items for 220/132kV Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Isolators and accessories as per specification.

Supply of Isolators, with both manual and motor driven operating mechanisms along with Support Insulators, clamps & connectors as required.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Tandem Isolator.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

36kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.

Supply of Isolator mounting structures, foundation bolts, nuts bolts etc. as required.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

245KV, 3150A, 50kA for 3 sec, Horizontal Double Breaktype Tandem Isolator.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator with single earth switch.

145KV, 2000A, 40kA for 3 sec, Horizontal Double Breaktype Isolator without earth switch.

36kV,1250A, 31.5kA for 3sec Horizontal Double Break type Isolator without earth switch.

Supply of insulator string assembly with antifog insulators and hardware fittings complete set with nuts bolts, clamps and other accessories as required.

220kV, 2x120kN double tension string suitable for Single AAAC Zebra conductor.

220kV, 2x120kN double suspension string suitable for Twin MOOSE conductor.

220kV, 2x160kN double tension string suitable for Twin MOOSE conductor.

132kV, 2x120kN double suspension string suitable for Twin MOOSE conductors

132kV, 2x160kN double tension string suitable for Twin MOOSE conductors

132kV, 2x90kN double suspension string suitable for Twin Zebra conductors

132kV, 2x120kN double tension string suitable for Twin Zebra conductors

132kV, 90kN tension string suitable for Single Panther conductor.

132kV, 70kN suspension string suitable for Single Panther conductor.

Conductors, Clamp Connectors as per specification.

ACSR Moose Conductor

ACSR Zebra Conductor

Clamps, Connectors as per site requirement and EKD

Bus post insulator as per specification.

Supply of 1 phase Solid core bus post insulator with creepage distance 31mm/kV including clamp connectors and other accessories as required.

245KV, BPI

145KV, BPI

Suply of bus post insulator support structures, foundation bolts, nuts & bolts and other accessories as required.

245KV, BPI

145KV, BPI

Supply of Station Service Transformer (Energy efficiency level-3) and accessories as per specification.

500 KVA, 33/0.4kV StationTransformer, including Terminal Clamps & Connectors.

440V MCCB with Power receiving Panel as per scheme requirement (with structure, if applicable) for 500KVA Station Service Transformer

33kV DO fuse for 500kVA station service transformer complete with all accessories and support structures.

Surge Arrester as per spefication

Supply of Surge Arrester complete with Surge Counter, leakage current meter, clamps & connectors and other accessories as required.

216KV, 10kA, LA

120kV, 10kA, LA

30kV, 10kA, LA

Supply of Surge Arrester support structures, foundation bolts, nuts bolts etc as required.

216KV, 10kA, LA

120kV, 10kA, LA

30kV, 10kA, LA

CVT and Wave Trap as per specification.

Supply of CVT and Pedestal Mounted Wave Trap complete with support insulators, hardware fittings, clamps & connectors, Junction Box and other accessories as required.

220kV, 4400pF, 3 Wdg CVT.

220KV, 1250A Wave Trap.

Supply of CVT and Wave Trap pipe/Lattice support structure, foundation bolts, nuts bolts etc as required.

220kV, 4400pF, 3 Wdg CVT.

220KV, 1250A Wave Trap.

Outdoor AIS Circuit Breaker along with clamps & connectors, support structures, foundation bolts and all other accessories as required as per specification.

245kV, 3-phase, Single Pole, 3150A, 50kA for 3 sec.

245kV, 3-phase, Gange Operated, 3150A, 50kA for 3 sec.

145kV, 3-phase, Gange Operated, 3150A, 40kA for 3 sec.

Bay Marshalling Kiosk alongwith support structures, foundation bolts and all other accessories as required as per specification.

220kV BMK

132kV BMK

Instrument Transformer (CT & PT) as per specification.

Supply of CT & PT alongwith junction box, clamps & connectors and other accessories as required.

220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT for line bay

220kV, 600-300/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1600-800/1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for Bus coupler bay

132kV, 800-600/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1-ph Potential Transformer (3 wdg, 0.2-3P-3P)

Supply of CT/PT support structures, foundation bolts, nuts bolts etc as required.

220kV, 1600-800/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 Ph, CT for line bay

220kV, 600-300/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1600-800/1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for Bus coupler bay

132kV, 800-600/1-1-1-1-1 (0.2S-PX-PX-PX-PX); 1 ph CT for 160MVA trafo bay

220kV, 1-ph Potential Transformer (3 wdg, 0.2-3P-3P)

SUPPLY of Following Lattice type Gantry Structure with bolt , different type of G.I HT Nuts & Bolts, washer, spring washer including accessories as per technical specifications. All Supply should confirm to the Technical Specification.

220 kV Column (C1) with Peak

220 kV Beam (B1)

220kV Column (C2) without Peak

132 kV Column (C3)

132 kV Beam (B2)

Control, Relay & Protection Panel(Simplex Type) as per specification along with all accessories as required.

220kV AIS

220kV Bus Bar CRP

220kV Line CRP with Line Differential (distance as backup)

220/132/33kV ICT CRP (160MVA)

220kV Bus Coupler CRP

132kV AIS

220/132/33kV Transformer CRP (160MVA)

Relevant software for relay configuration & setting, maintenance etc.

Relay Maintenance Tool Kit as per bid document

Complete Substation System Automation System (As per specification )

Station HMI (Main, Redundant and Metering) with Industrial PC

Maintenance HMI (DR Workstation) with Industrial PC

Gate way with PLCC and Fibre Optic Modem and Panel

SAS Inverter (5kVA)

Laser MFP Printer

GPS Clock System

16 port Ethernet Switch

All interphase equipment for Gateway to SLDC

VDU 75 inch

Aux BCU Panel as per scheme requirement

All other accessories like FO armoured cables, HDPE Conduit/GI conduit Patch cords,furnitures for HMIs and printers, cables etc as per requirement

Station Ethernet Switch

SAMAST compliant ABT meters including DCU, modems, FO cables and other related accessories etc.as per specification.

Red Box

Annual Maintenance Contract (AMC) as per bid

Integration of all existing CRP, station auxiliary etc. at Baghjap with new SAS

160MVA, 220/132/33kV, ONAN/ONAF/ODAF or ONAN/ONAF1/ONAF2, ICT along with all accessories and below: (including terminal connectors and other acessories as per technical specification

160 MVA, 220/132/33kV, Three phase Transformer with OLTC & Oil

RTCC Panel with AVR (TMS)

10% Extra OIL for each transformer

Rail track for transformer

Pulling block for transformer

Trasformer condition monitoring devices (Oil & winding temperature monitoring system (FO based), Online DGA (Multi gas), Online insulating drying system, Maintainence free breather)

Battery & Battery Chargers, DCDB & ACDB as per specification

110V VRLA Battery 600AH

110V, Dual Float Cum Boost Chargers for 110V Battery 300A

110V, DCDB

48V VRLA type Battery Bank 300AH

48V, Dual Float cum Boost Chargers SMPS based for 48V Battery 60A

48V, DCDB

Main ACDB

Sub ACDB

MLDB with 415V/415V, 100kVA isolation transformer

ELDB with 415V/415V, 50kVA isolation transformer

HVAC DB

MCBDB as per site requirement

Power Line Carrier Communication Equipments

HF armoured co-axial cable (ALONGWITH HDPE /GI CONDUIT)

Digital Carrier Equipment Panel (Twin channel and should support transmission band for line length 240 km) for 220kV

IEC 61850 compliant Digital Tele- Protection Coupler, 16 command with redundant power supply card and CPU along with analog PLCC interface card, E1 interface card and optical interface card to support 240 km(220kV)

LMU and LMDU

CAT 6 armoured cable.

2 wire telephone set

Audio Cable

XLPE Armoured, LT Power Cable (1.1kV grade)

2C, 6sqmm Cu

4C, 16sqmm Cu

3.5C, 35sqmm Al

3.5C, 150sqmm Al

3.5C, 70sqmm Al

3.5C, 400sqmm Al

Cable supports and other cable accessories

Others ( Cable for Fire Fighting, Illumination etc)

PVC Armoured Cu LT Control Cable (1.1 kV grade)

4C, 2.5sqmm

7C, 2.5sqmm

12C, 2.5sqmm

19C, 2.5sqmm

Cable supports and other cable accessories

Others ( Cable for Fire Fighting, Illumination etc)

Earthing

Main earth mat conductor, GI risers, treated /Untreated earth pit, equipment earth connections etc as per technical specification and approved drawing/calculation

75x12 mm Dia GS (HDG) Flat for Main Earthmat and satellite/auxiliary earthmat

Earthing Conductor: 75x12 mm Dia GS (HDG) Flat For Riser From The Burial Earth Mat To Equipment,Structure, Fence Etc)

Earthing Conductor: 75X 12 Mm GS (HDG) Flat For equipment and structure earthing

Earthing Conductor: 50X10Mm GS(HDG) Flat For Riser For Console Box,Lt Panels,Dc Panels,Marshalling Boxes, Cable Trenches Etc)

Earthing Device & Associated Accessories (50 Mm dia Heavy Duty GI Perforated Pipe 3 Mtrs Long For Treated Earth Pit with CI Cover.

Earthing Device & Associated Accessories 40Mm dia MS Rod 3 Mtrs Long For Non Treated Earth Pit with CI Cover.

75X10mm, 65x12mm,65x10mm,50x8 mm, 50x6 mm and 25x6mm GS Flat as per site requirement

GI Shield 7/3.66 wire/ lightining spikes for column with peak column and LM including shield wire clamps

Other Earthing Accessories ( required for complete earthing of the entire switchyard and the buildings)

Fire Alarm & Detection including all accessories as per specification

Fire Alarm & Detection system for Control Room Building including Fire Alarm panel, Multi Sensor detector, Smoke detector, manual Call point, Hooter, Response Indicators, Beam Detector, Cabling, ISOLATING MODULE etc.

Trolley mounted portable fire exinguishers (Dry powder chemical type) for transformers ( 25 Kg , DCP Type)

Portable and wheel/trolley mounted Fire Extinguishers for Control room (5kg X 3 nos. and 2kg X 3 nos.), Guard room (Security Booth) (2kg X 3Nos), Store building (2kg X 5 nos), Open store shed (2kg X 4Nos) as per specification.

Dry powder chemical type 5 kg. For 500 kVA transformer

Hydrant & HVWS (High Velocity Water Spray) system/NIFPES including all accessories as per specification.

Hydrant system along with pumping arrangement & associated Civil works for fire protection system

HVWS system (automatic emulsifier and manual hydrant point both) for 160 MVA ICT-2 no.

NItrogen injection Fire protection and emergency service with complete accessories and related Civil and Electrical works for 2 Nos ICT

Lighting System

Outoor Lighting as per technical speceification

Public Addressing System & CCTV complete with all accessories as per specification.

Outdoor LED lighting for Approach road, Switchyard area, Colony area, Road area, Car parking, Security outpost, open store shed, Bore and OHT area, etc, including Lighting panel, Cabling, street lighting, Switches, Distribution boards, Socket, auxiliary receptacle, complete with GI Poles etc.

Lightning protection system (lightning masts 50 metres high, Lightning Spike, shield wire(7/4mm GI Shield wire), down conductors etc.) for complete substation.

Miscellaneous item(like MS Channel,Angle, 8 mm Chequered plate,MS Grill plate,Switchyard and Bay Identification Name board, Anchor fastner and Display for Overall single line diagram photo with frame.etc…as per site requirement and for overall completion of the project).

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-F&I of Line Items for 220kV Sonapur-Karbi Langpi D/C LILO at Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification. 220kV Towers and 220kV Multi circuit towers shall be designed to suit Twin AAAC Zebra conductor;

Quad circuit Tower C+0

Quad circuit Tower C+6

Quad circuit Tower D+6

Quad circuit Tower D+15

Adjustable Stub setting template

D type

Quad circuit C type

Quad circuit D type

Galvanized iron nuts & bolts for above template

D type

Quad circuit C type

Quad circuit D type

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/4.00 mm All Aluminium Alloy Conductor Zebra

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables

96 Fibre (DWSM) OPGW fibre optic cable

96 Fibre Optic Approach Cable (DWSM96F)

OPGW HARDWARE/FITTINGS AND TERMINATIONS

OPGW double tension pass through assembly

OPGW Double Tension Assembly for splicing location c/w pre-formed armour rods and tower bond clamps

OPGW Tension Single Dead-end Set for termination/ run-in c/w pre-formed armour rods and tower bond clamps

OPGW Vibration Damper c/w pre-formed armour rods

Down Lead Clamp

OPGW optical Splice/Joint Kit (96 fibre) including junction box (min 4 mm thick)

Loop Bracket

FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails

Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.

Others (For any additional Hardware and Fittings, tenderer to specify)

LONG ROD INSULATOR

Long rod insulator for 220 KV TL-90 KN (Suspension insulator)

Long rod insulator for 220 KV TL-120 KN (Tension insulator)

HARDWARE FITTINGS

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single "I" Suspension String (Pilot)

Hardware fittings for 220kV AC with AAAC ‘ZEBRA Conductor-Double Tension String 120X2 kN

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single Tension

Tower earthing accessories

40 mm dia, 3 mtr long GS pipe electrode (driven) with test link

50x6 mm GS flat as required

Other earthing accessories like GI steel wires, lugs, etc

Design Services

Design services for two types of Quad Citrcuit towers suitable for 96F OPGW (Design and type test)

GI Shield wire including shield wire clamps for tower peaks without OPGW

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-F&I of Line Items for shifting of 132kV Sonapur-Morigaon D/C line at Morigaon AIS (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/3.15 mm All Aluminium Alloy Panther Conductor

7/3.66 mm GI sheild/earth wire

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

LONG ROD INSULATOR

Long rod insulator for 132 KV TL-70 KN (Suspension insulator)

Long rod insulator for 132 KV TL-90 KN (Tension insulator)

HARDWARE FITTINGS

Hardware fittings for 132kV AC with AAAC ‘Panther Conductor-Single "I" Suspension String (Pilot)

Hardware fittings for 132kV AC with AAAC ‘Panther Conductor-Single Tension

Tower earthing accessories

40 mm dia, 3 mtr long GS pipe electrode (driven) with test link

50x6 mm GS flat as required

Other earthing accessories like GI steel wires, lugs, etc

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE-F&I of Line Items for 220kV Morigaon-TSAT D/C (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SUPPLY of Following type tested Lattice type Galvanized steel suspension / Angle tower with stubs and cleats , different type of G.I HT Nuts & Bolts, washer, spring washer for the towers, hanger and all accessories, tower super structure complete including step bolts. Supply of black bituminous paint for three coats up to a height of 500mm above the cooping (legs & bracing members). All Supply should confirm to the Technical Specification. 220kV Double circuit towers shall be designed to suit Twin AAAC Zebra conductor;

Adjustable Stub setting template

B type

C type

D type

Galvanized iron nuts & bolts for above template

B type

C type

D type

Procurement of Danger plates.

Procurement of Phase plates.(Set of Three)

Procurement of Number plates.

Procurement of Bird guard. (Set of Three)

Procurement of anti climbing device

Procurement of Circuit Plate

37/4.00 mm All Aluminium Alloy Conductor Zebra

POWER CONDUCTOR ACCESSORIES

Stock bridge type Vibration Damper

Preformed Armoured Rods

Mid Span Compression Joint for Conductor

Repair Sleeve for Conductor

FIBRE OPTIC CABLES AND HARDWARE FITTINGS & Fibre Optic Cables

96 Fibre (DWSM) OPGW fibre optic cable

96 Fibre Optic Approach Cable (DWSM96F)

OPGW HARDWARE/FITTINGS AND TERMINATIONS

OPGW double tension pass through assembly

OPGW Double Tension Assembly for splicing location c/w pre-formed armour rods and tower bond clamps

OPGW Tension Single Dead-end Set for termination/ run-in c/w pre-formed armour rods and tower bond clamps

OPGW Vibration Damper c/w pre-formed armour rods

Down Lead Clamp

OPGW optical Splice/Joint Kit (96 fibre) including junction box (min 4 mm thick)

Loop Bracket

FODP 96F: Indoor Type, rack mounted with FCPC coupling and pig tails

Installation hardware set for above 96 Fibre, Fibre Optic Approach Cable vizties/clips/cleats, conduits, ducts, supports, fittings, accessories etc for extending OPGW from sub-station end tower/gantry to FODP at control/ communication room by splicing fibres of OPGW with FOAC in joint box at tower/gantry and splicing FOAC in FODP at control/ communication room.

Others (For any additional Hardware and Fittings, tenderer to specify)

LONG ROD INSULATOR

Long rod insulator for 220 KV TL-90 KN (Suspension insulator)

Long rod insulator for 220 KV TL-120 KN (Tension insulator)

HARDWARE FITTINGS

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single "I" Suspension String (Pilot)

Hardware fittings for 220kV AC with AAAC ‘ZEBRA Conductor-Double Tension String 120X2 kN

Hardware fittings for 220kV AC with AAAC ‘Zebra Conductor-Single Tension

Tower earthing accessories

40 mm dia, 3 mtr long GS pipe electrode (driven) with test link

50x6 mm GS flat as required

Other earthing accessories like GI steel wires, lugs, etc