REPAIR TO JOINERY SANITARY PLUMBING FLOORING ETC TO CENTRAL AMENITIES BLDGS UNDER AGE B/R-II OF GE(N) PATIALA

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement with WPC paid and WPC to be measured separately complete all as specified and directed.

Supply only Water proofing compound complete all as specified and directed.

M & L for Rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified and directed.

M & L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed.

Preparation of new plastered surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat and over two coat of acrylic wall care putty 1.5 to 2.5 mm as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of new plastered surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sqm/ litre/ 2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sqm/ litre/ 1 coats and over two coat of acrylic wall care putty 1.5 to 2.5 mm as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of new plastered surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sqm/ litre/ 2 coats by using roller/brush to ceiling / false ceiling surfaces over & including a coat of interior wall primer @ 10 sqm/ litre/ 1 coats and over two coat of acrylic wall care putty 1.5 to 2.5 mm as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 05 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat and over two coat of acrylic wall care putty 1.5 to 2.5 mm as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces and applying 02 coats of interior emulsion paint (light shade) @ 5 sqm/ litre/ 2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sqm/ litre/ 1 coats and over two coat of acrylic wall care putty 1.5 to 2.5 mm as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces and applying 02 coats of interior emulsion paint (light shade) @ 5 sqm/ litre/ 2 coats by using roller/brush to ceiling surfaces over & including a coat of interior wall primer @ 10 sqm/ litre/ 1 coats and over two coat of acrylic wall care putty 1.5 to 2.5 mm as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

M&L for prepation of old/new plastered surfaces of walls and applying two coat of white wash complete all as specified and directed.

M&L for preparing old/new surfaces of ceiling and applying two coat of white wash on ceiling surfaces complete all as specified and as directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M & L for preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.

M&L for applying two coats of cement base paint incl preparation of surfaces and coat of primer with alkali- resistant priming paint complete all as specified and directed.

M&L for preparing old surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

Preparation of surfaces and applying one coat of exterior emulsion paint (light shade) @ 10 sq.m/litre/1 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion over and including filling any holes with putty complete all as specified and directed.

Complete removal of existing treatment including washing rubbing down and stopping of painted surfaces and applying 1-2 mm thick metallic texture painting (Top quality) on walls in any colour/shade/pattern/design including preperatory work for base by applying primer/putty coat by any authorised applicator complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.

M&L for machine cut Pre polished kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry complete all as specified and directed. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for machine cut Pre polished kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete, all as specified and directed.

M&L for single charge, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 100 mm and 9-10 mm thick in any pattern of light & dark tiles as approved,on vertical surfaces such as in skirting/dado etc ,length of each unit not less than 600 mm and height not more than 150mm, set and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Skirting should be flushed with the wall plastering.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Granite (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 18-20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified . Note : Single piece should be used in steps/cills/jambs/shelves.

Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set & jointed in neat cement slurry ,pointed in matching colored polymer cement based grout to match complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 20 mm thick including bull-nose the front length, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified and directed. Note : Single piece should be used in steps/cills/jambs/shelves.

M & L 75mm thick PCC 1: 4: 8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate 25mm thick as in bedding layer under floor tiles etc complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mmthick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position / height( single storey/ double storey/ tripple storey) by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, including scaffolding upto tripple storey, complete all as specified and directed. Note : (i) The extra area of 300mm around the actual affected area will be checked and repaired and only repaired portion will be taken for measurement. (ii) Rate of scaffolding is deemed to be included in quoted rate.

Taking down aluminium door/ windows incl frames and complete fittings of area exc 1.00 sqm but n. exc 4 sqm complete all as specified and directed.

Taking down aluminium partition of any type and size incl all necessary fitting and making good to disturbed portion complete all as specified and directed.

Powder coated 50 microns extruded aluminium frame for fixed type partition made out of powder coated aluminium section of size 101.60 x 44.45 x 1.93mm, comprising of 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) inserted in and including necesary jointing cleats, rubber packing/EPDM gasket, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete all as specified and directed.

S&F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.28mm min thickness for chowkats or frame & shutters made of size 44.45x44.45x1.29mm min thickness for side rails and middle rail, 114.3X44.45X1.29mm min thickness for top rails and bottom rails complete all as specified and directed.

S&F aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm min thickness and shutters made of 63.5X31.75X1.29mm min thickness complete all as specified and directed.

S&F Powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm min thickness, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm min thickness, with built in locking system for each leaf complete all as specified and directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm min thickness complete fixed in all respect complete all as specified and directed.

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed.

S&F 5mm thick glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete all as specified and directed.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete all as specified and directed.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 200mm long complete all as specified and directed.

S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.

S&F powder coated aluminium handles 150mm complete all as specified and directed.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed.

Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows complete in all respect as specified and directed.

S&F in repair amluminium door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg complete all as specified and directed.

S&F in repairs Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square exceeding 0.5 sqm in each pane complete all as specified and directed.

Taking down Aluminium door / window shutters for repairing and re-fixing in same opening including tightening frame etc all as specified and directed as under:- (i) Rectification of open joints by refixing of cleats, tightening of screws (ii) Replacement of unserviceable rubber beading of aluminium door / window shutter glass pannels etc all as specified and directed. (iii) Replacement of unserviceable satinless steel butt hinges (iv) Replacement of unserviceable brass mortice lock of size 75mm with 4 lever complete all as specified and directed. (v) Replacement of unserviceable PVC panel inserts 5mm thick

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified and directed. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items).

S&F Pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified and directed. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items).

S&F factory made flush shutters 35mm thick, BWP conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and incl supply and fixing following items:- (a) Mild Steel Butt Hinges 150mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:- (a) Mild Steel Butt Hinges 150mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete.

S&F Stainless steel tubing of 25mm bore 1.6mm thick as in curtain rod complete incl fixing fancy type brackets, stops etc all as specified & directed as in repair (For the purpose of measurement and payment running length of curtain rod only shall be considered).

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.10 mm and fixedd with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts bolts etc complete fixed as in repair complete all as specified.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed.

S&F of venetian blinds screen fabric with 5% openness factor roller type for windows of colour/shade as approved by Ac cepting Officer complete fixed in position inclusive S&F of all accessories and hardwares for fixing and operation, all as recommended by manufacturer, all as specified incl taking down old curtain rods of any type complete all as specified and directed.

S&F PVC hollow Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified and directed.

S&F false ceiling of 12.5mm thick gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by Accepting Officer and including supply and fixing of items all as specified as below :-

(a)Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa,Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. (b)Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. (c) Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} (d)Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. (e)Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. (f)Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape and applying 02 coats of interior emulsion over a coat of wall care putty including a coat of primer all as specified. Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed.

M&L for Suspension System for false ceiling consisting of Prelude 32 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsmas per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability complete as with the followings :-

Suspension System Details 20-06-2020 :- Base Material Hot dipped galvanized steel of 90 gsmas per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability Construction Method Roll formed double stroked rotary stitched construction to mechanically lock together the two metal layers of the vertical web Deflection Loading 18 kg/m with deflection limit less then L/360 as per ASTM C635 Pull-out Strength 100 kg Main Runner Dimensions 3600(L) x 38(H) x 24(W) mm Cross Tee Dimensions 1200/ 600(L) x 38(H) x 24(W) mm Cross Tee End Detail The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam” Wall Angle dimensions 3000(L) x 19(H) x 19(W) mm Main Runner Rout Spacing 150 mm Hanger-wire Material Galvanized Steel with 0.7 micron coating Hanger-wire Dimensions 2.5 mm Ø x 1800 mm Hanger-wire Tensile Strength 344-413 MPa Hanger-wire Pull Strength 110 Kgs Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed.

M&L minimum 12 mm thick mineral fibre tile with NRC 0.45, pin holed texture for false ceilings, 595x595 (±5) mm in size fixed in false ceiling as per manufacturer's instructions to frame work or on snap grid as in repairs complete all as specified and directed. Note: Frame work for false ceiling shall be measured and paid separately

Dismantling Asbestos Cement (corrugated, semi-corrugated,etc.) sheet in roof coverings complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as sepcified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as sepcified and directed.

S&F work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes complete all as sepcified and directed.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete, all as sepcified and directed.

Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description complete, all as sepcified and directed.

S&F in repair ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs complete all as specified and directed.

Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 all as directed and specified.

S/F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, PVC flush pipe 32 mm bore and fixing as per manufacturers instruction incl taking down HL/LL flushing cistern and making good the disturbed surfaces in CM 1:3 complete all as specified and directed.

S&F Vitreous china urinal, stall type, of size 330x300x450mm incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, waste coupling 32mm , bottle trap, pointing urinal back in cement; connection for discharge pipe incl necessary packing,union and 15mm CP urinal spreader and CP connection pipe complete all as specified and directed.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish without any beading, including ends/edges of the mirror to be tapered etched smooth finish etc.complete fixed in position all as specified and directed.

M&L for toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size Complete all as specified and directed. Note : The items for counter will be measured and paid separately.

S&F vitreous china premium/1st quality wash basin (counter top), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed. Note : The items for counter will be measured and paid separately.

S&F vitreous china premium/1st quality wash down water closet wall hung EWC P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified and directed.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified and directed.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified and directed.

S&F fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed.

S&F Single liver 3-inlet divertor consisting of exposed parts kit with operating lever, wall flange and button and concealed body for 3-inlet single lever divertor with button assembly, cartidge sleeve and also including spout with wall flange chromium plated, screwed down high pressure complete all as specified and directed by Engineer in Charge.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified and directed.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed.

S&F Vitreous china premium/1st quality urinal sensor type white colour, of size 310x305x620mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union, including sensor type flushing, complete all as specified and directed.

S&F urinal spreader for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed.

S&F in repair Stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore pipe fixed in repair complete all as specified and directed.

All as per sl item No 102 hereinbefore but for 20mm bore complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S & F in repair brass shower rose 125 mm size (Chromium plated) with swivel joint complete, suitable for 15 mm bore iron pipe complete all as specified and directed.

M & L coloured chequred cement concrete tiles 30 cm x 30 cm x 20mm thick,made of grey cement set and jointed in neat cement slurry with grey cement and pigments as in floors to match the shade over screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 for laying floor finished, complete all as spcified and directed.

M & L 60 mm thick rubber moulded, lacqured finished, coloured Machine pressed precast concrete interlocking of M-30 paver block any shape and size confirming to IS 15658 - 2006 filled with grey cement and pigment over sand cushioning 25mm thick, complete all as specified

DELTA CONSTRUCTION CO

Buttar Construction Co.

KK BUILDERS

Nanotech Construction

HARJIT CONTRACTS

Arneja Builders