Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.1 L+₹3.8 L (11.4%)Rejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹38.0 L+₹4.6 L (13.9%)Rejected-Finance | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹38.7 L+₹5.3 L (16.0%)Rejected-Finance 122 SAMHARIYA ASOPUR TANDA AMBEDKAR NAGAR UTTAR PRADESH 224190 | AMBEDKAR NAGAR | UTTAR PRADESH | 224190 | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹38.8 L+₹5.5 L (16.4%)Rejected-Finance | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
Refer Docs
EMD Value
₹82,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jaipur
GE Jaipur
PROVN OF DEFI TOILETS AND BATHROOM FOR SWC CAMP AT JAIPUR MIL STN
2023_MES_596266_1
GE/J-02/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Jaipur
As per Tender Documents
5 documents required · 5 mandatory
₹500
GE Jaipur
₹82,000
Yes
17 Aug 2023
17 May 2023
22 Jun 2023
17 May 2023
20 Jun 2023
7 Jun 2023
Amount
B/R Portion Surface excavation n.exc 30 cm deep and everaging 15cm deep in soft/loose soil and getting out including clearing of bushes herbs etc. complete all as specified and as directed.
Excavation over areas not exc 1.5m deep and getting in soft/loose soil complete all as specified and as directed.
Excavating over areas exceeding 1.5 m & not exceeding 3m deep and getting out in soft / loose soil complete all as specified and as directed.
Excavating over areas exceeding 3m & not exceeding 4.5m deep and getting out in soft / loose soil complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m depth for foundation etc. or for shafts , wells manholes, pier holes etc. n. exc 10 sqm on plan, getting out soft/ loose soil complete all as specified and as directed.
Excavation in trenches n exc 1.5m wide, exc 1.5m in depth and not exc 3m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm om plan and getting out in soft/loose soil complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum getting out, returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface.
M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed.
M&L Sand filling under floors including spreading, levelling watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
M&L hardcore of broken stone or boulders, gauge not exc 63 mm, deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 in foundations, fillings and mass-concrete, sub base of floor complete all as specified and as directed.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in with Cement mortar 1:6 complete all as specified and as directed.
M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.
M&L RCC M-25 (Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.
M&L RCC M-25 (Design Mix) using 20mm graded stone aggregates in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate in slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.
M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate in Columns, pillars, piers, posts and struts for complete all as specified and as directed. Note : Reinforcement & formwork shall be measured and paid for separately.
M&L for rough finish formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for rough finished formwork to sides and soffits of floor or roof beams, beam haunching, girders, lintels, cantilevers, shelves including supports, overhangs etc.for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for rough finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200m thick (horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and as directed.
M&L for rough finished formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and as directed.
M & L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and as directed.
M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape requried, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
,---ditto----- all as per srl item No. 24 above but 6mm to 8mm dia as in stirrups complete all as specified and as directed.
M&L screed bed or bedding layer or mortar 15mm thick over roof finishes in CM 1:4 mixed with WPC finished even and smooth w/o using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately
M&L applied a coat of bituminious primer confirming to [email protected] Kg per Sqm, APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application complete all as specified and as directed.
M&L preparing new surfaces APP based polymeric membrane roof top exc 10cm width or girth and applying two coats of aluminium paint complete all as specified and as directed.
Supply only integral waterproofing compound ISI marked complete all as specified and as directed.
M & L Rendering 10 mm thick cement plaster in CM 1:6 on fair faces of brick work (Internal Surface) finished even and smooth without using extra cement complete all as specified and as directed.
M & L Rendering 15 mm thick cement plaster in CM 1:4 on fair faces on brick masonry (External surface) complete all as specified and as directed.
M&L Rendering 5mm thick cement plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends,etc, complete all as specified and as directed.
M&L preparation of new plastered surfaces of walls, and applying two coat of oil bound distemper over a coat of primer over 3mm thick wall care putty on wall complete all as specified and directed.
M&L preparation of new plastered surfaces of ceiling, and applying two coat of oil bound distemper over a coat of primer over 3mm thick wall care putty on ceiling complete all as specified and directed.
M &L for preparation of new plastered surfaces of walls, AC sheet, soffits of chajjah of any description and at any position and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 Sqm over new surfaces as required complete all as specified and directed.
M&L for 75mm thick plain cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base finished even and fair complete all as specified and directed.
M&L Non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for glazed ceramic tiles 450x 600x 7 mm thick set & jointed in neat cement slurry and pointed in coloured cement to match in Dado/skirting including 10 mm thick rendering in CM 1:4 on fair faces of brickwork or concrete surfaces of wall as backing coat complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain color PVC sheet, reinforced with MS square tube complete all as specified and as directed.
S&F factory made solid PVC moulded 30 mm thick door shutter with particle board core, 28mm to 30mm thick (stiles), with 2, 4 or 6 panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm thick moulded prelam PVC sheet on back face, supplying and fixing in the frame at site complete all as specified and as directed.
S&F 300 mm long brass sliding door bolt with hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed (ISI Marked) complete all as specified and as directed.
,---ditto-- all as serial item no 44 above but 150 mm long complete all as specified and directed.
S&F 150 mm long brass barrel tower bolts of with cast or sheet barrel and rolled or cast bolts and fixed (ISI Marked) complete all as specified and as directed.
S&F 150 mm extruded brass handles, fabricated type polished (ISI Marked) complete all as specified and as directed.
S&F 100 mm long butt hinge cast brass with stainless steel hinge pin heavy weight and fixed to wooden or PVC frame fixed in repairs by staijnless steel screw complete all as specified and as directed.
S&F aluminum door closer hydraulically regulated designation No. 2 universal type (ISI Marked) suitable for door shutters of weight between 36 to 60 Kg complete all as specified and as directed.
S&F 15 mm bore CP brass (fancy type) angle stop cock with wall flange all as specified and as directed. Make- CERA, Model- Kenzo 272210270041 or equivalent in Jaquar, Hindware & Kohler)
S&F 15 mm bore CP brass (fancy type) long nose bib tap with all as specified and as directed. Make- CERA, Model- Thistle 272211140031 or equivalent in Jaquar, Hindware & Kohler)
S&F 15 mm bore CP brass (fancy type) 2- way bib tap with wall flange complete all as specified and as directed. Make- CERA, Model- Thistle 272211140051 or equivalent in Jaquar, Hindware & Kohler)
S&F in 15 mm bore CP brass (fancy type) quarter turn concealed stop cock with built in Non Return Valves (composite one body) along with uper visible part all as specified and as directed. (Make- CERA, Model- Kenzo 272210270161 or equivalent in Jaquar, Hindware & Kohler)
S&F stianless steel Square grating 125 x125mm size with frame over floor trap anti cockroaches all as approved sample complete (Make - CERA, Model - 272150050781 or equivalent in Jaquar, Hindware or Kohler).
S&F Chrome plated square towel ring supported on brackets complete all as specified and as directed(Make- CERA, Model- 272151340021 or equivalent in Jaquar, Hindware & Kohler)
S&F chrome plated single towel rail/ rod 600 mm long with all the fittings complete all as specified and as directed(Make- CERA, Model- 272151340081 or equivalent in Jaquar, Hindware & Kohler)
S&F glass towel rack cum shelf 600 mm long with lower hangers and the required fittings complete all as specified and as directed. (Make- CERA, Model- 272151340101 or equivalent in Jaquar, Hindware & Kohler)
S&F chrome plated dual robe hook with the required fittings complete all as specified and as directed. (Make- CERA, Model- 272151340051 or equivalent in Jaquar, Hindware & Kohler)
S&F Chromium plated Wall mixer 3 in 1 system with provision of both hand shower and over head shower complete all as specified and as directed. (Make- CERA, Model- Thistle 272211140021 or equivalent in Jaquar, Hindware & Kohler)
S&F square overhead shower single flow with air effect (ABS body with face plate white) with rubit cleaning system complete all as specified and as directed.(Make- CERA, Model- Kenzo 272220270011 or equivalent in Jaquar, Hindware & Kohler)
S&F Hand shower of dia 105 mm round shape single flow with air effect (ABS body with face plate white/ black matt finish) with rubit cleaning system complete all as specified and directed.(Make- Jaquar, Cat Part No HSH- WHM - 1715 or equivalent in CERA & Kohler)
S&F health faucet 15 mm bore of 08 mm dia flexible tube of length 1.20 m long with wall hook and N.R.V. complete all as specified and directed. (Make- CERA, Model- 272150680341 or equivalent in Jaquar, Hindware & Kohler)
S&F 15 mm stainless steel, chrome finish, jet spray complete all as specified and directed.
S&F vitreous china single piece EWC with UF slim seat cover, hinges fitting with accessories and cistern fitting 370 x 700 x 715 mm S trap (220 mm)/ P trap 180 (mm) complete all as specified and directed. (Make- CERA, Cat Part Marina or euivalent in Jaquar, Hindware or Kohler)
S & F vitreous china bowl urinal flat back, size of 290 x 240x 520 mm white incl providing and fixing plugs, securing urinal to plugs with and including 60mm long brass screws with grating and union for discharge pipe including PVC waste pipe complete all as specified and directed. Make- CERA, Cat Part- OBLO or equivalent in Jaquar, Hindware, or Kohler
S&F vitreous china urinal divison plates size 145x 310x 695 mm fixed to wall between urinals, fixed with all accessories complete all as specified and directed. (Make - CERA, or equivalent in Jaquar, Hindware or Kohler
S&F square/ rectangular shape Counter top WHB 610 x 390x 135 mm size fixed in position including fixing of taps waste pipes, waste coupling, connection pipe and other connected accessories complete all as specified and as directed. (Make- CERA, Model- SPIRIT or equivalent in Jaquar, Hindware & Kohler)
S&F central hole single lever extended basin mixer pillar cock braided hoses complete all as specified and directed. (Make- CERA, Model- Thistle 272211140021 or equivalent in Jaquar, Hindware & Kohler)
S&F Double arm wall mounted reversible magnifying (X3) pivotal mirror alongwith all the connected fittings complete all as specified and directed. (Make- Jaquar, Cat Part No ACN - 1193N or equivalent in Kohler or cera or hindware)
S&F Soap dish Holder complete all as specified and as directed. (Make- CERA, Model- 272151340031 or equivalent in Jaquar, Hindware & Kohler)
S&F Tumbler Holder complete all as specified and as directed(Make- CERA, Model- 272151340041 or equivalent in Jaquar, Hindware & Kohler)
S&F Soap Dispenser with Glass bottle complete all as specified and as directed. (Make- CERA, Model- 272151340071 or equivalent in Jaquar, Hindware & Kohler)
S&F Glass mobile shelf cum Toilet Paper roll holder complete all as specified and as directed. (Make- CERA, Model- 272151340101 or equivalent in Jaquar, Hindware & Kohler)
S&F Glass shelf 600 mm long complete all as specified and as directed. (Make- CERA, Model- 272130160021 or equivalent in Jaquar, Hindware & Kohler)
S&F Corner Glass shelf (with brackets) complete all as specified and as directed. (Make- CERA, Model- 272130160031 or equivalent in Jaquar, Hindware & Kohler)
S&F 250 mm long Grab bar white, complete all as specified and directed by Engineer-in-Charge. (Make- CERA, Model- 272150050081 or equivalent in Jaquar, Hindware & Kohler)
S&F GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.
S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed..
S&F of CPVC pipes 20 mm outer dia SDR 11 & Plain walls/ceiling or laying in floors complete all as specified and directed.
S&F Rotatinal moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I capacity 1000 ltr
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed.
S&F Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 25 mm bore complete all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed..
S&F ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified and directed.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia complete all as specified and directed.
S&F PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.
M&L 50 mm thick plain cement concrete type C-1 1:3:6 (Using 20 mm graded stone aggergates ) as in plinth protections finished even and fair with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar complete all as specified and directed..
S & F 18 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side decorative as in Sink/ Wash Basin cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of REHAU or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer complete all as specified and directed.
S & F 8 mm thick HDHMR (High density high moisture resistant) board of 'Action Tesa' or equivalent one side white laminate and other side un decorative as in back of kitchen cabinets complete all as specified and directed..
S & F auto close hinges, stainless steel of grade SS-304, bright finish fixed complete all as specified and directed. (Make : Hettich or equivalent)
S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed
M & L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform counters for wash hand basins and like in 12mm thick in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Rounding to edges of stone slabs one edges such as in steps, cooking platform, shelves and other similar situations complete all as specified and directed.
S&F Salt-glazed stoneware gully traps, square or round mouthed, type `P' size 150mmx150 mm complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 75 mm complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 110 mm complete all as specified and directed.
S & F of Rain Water Downtake pipelines fixing done with Pipe Supporting Clamping System having Rain Water Bracket Set with Support + U Bolt System - Rain Water Down take pipes 4" PVC - 1 no. running Vertical Fixed line from Terrace to Ground floor with wall distance 3": Pipe Support Clamping made of 1. Rain Water Bracket Set 4" x 3" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. and U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.: 1. Rain Water Bracket Set with Support 4" x 3" and U Bolt R/M for 4" PVC Pipe Dia. - 1 No.; and 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. (Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make : Shaivi or equivalent
S & F for Bathroom Duct Pipelines for Waste Water Pipe, Domestic Water Pipes and Riser supply downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Waste Water Pipe 2 1/2" PVC, 2. Water Supply Down take lines 3/4" GI - 2 nos. and 3. Riser Supply Downtake pipelines 3/4" GI - 1 nos. running from Terrace to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 20" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade :- IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.:- 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 20" - 1 No.; 3. U Bolt R/M for 2 1/2" PVC Pipe Dia. - 1 No.; 3/4" GI pipe Dia. - 3 nos. 4. Mono Bracket for 3/4" Pipe Wall Distance 3" - 1 no. and 5. Justi Khilla GI coated 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. (Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make :- Shaivi or equivalent
S & F of Toilet Duct Pipelines for Soil Water Down take pipe fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt System - 1. Soil Water Pipe 4" PVC - 2 pipe and running from Terrace to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Type A2 (Wall Distance 3") made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 22" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade :- IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.:- 1. Profile Bracket of A2 Type (Wall distance 3") - 2 Nos. 2. Slotted C Channel of B3 Type Size 22" - 1 No.; 3. U Bolt R/M for 4" PVC Pipe Dia.- 2 Nos.; 4. Mono bracket for 4" CI pipe wall distance 4" - 1 no. and 4. Justi Khilla GI coated 2 1/2" - 4 nos.Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing.( Refer CE Jaipur Zone Technical Drawing no. TD/2022/01.) Make :- Shaivi or equivalent
M&L cement concrete 1:4:8 tyep D2 100 mm thick as in flooring complete all as specified and as directed.
M&L Machine pressed precast concrete coloured interlocking paver block, rubber moulded, any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/pavement/parking laid over 50 mm thick (compacted) fine sieved sand complete all as specified and as directed. Note : Sand shall be measured and paid seperately
M & L precast PCC blocks or slabs (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints, Kerb stone on road side etc as directed complete in walls setting in CM (1:6) complete all as specified and as directed.
M&L for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified
M&L PCC 1:3:6 (Type C2 with 40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and as directed.
S&F Rolled MS in joist channel angle or tee section/ tubular posts fixed independently without connecting plates etc( cut to ordinary lengths ie ,with in 20 mmof length indicated with Fe 410.0 or Fe-250 complete all as specified and directed.
S&F MS work in roof trusses (framed), trussed purlins, rials and fastenings and heavy bracket. Framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc with Fe 410.0 or Fe-310.0 complete all as specified and directed.
S & F Plates (plain or chequered) channels, square cut or notched(ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.
S&F galvatume aluminium zinc coating GI based corrugated steel sheet (straight or curved) 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.
M&L applying two coat synthetic enamel paints over a coat of red oxide zinc chrome primer on new steel surfaces including preparation of all as specified and as directed.
M/Lfor walling of random rubble, uncoursed, well bonded, brought upto courses built in CM 1:6 complete all as specified and as directed.
M/Lfor walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work brought upto courses dia nexc 6m complete all as specified and as directed.
M&L Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.
M&L cutting into existing man holes for connecting new drains of 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqd complete all as specified and as directed.
Supply and laying DWC pipes ( Double wall corrugated) of class SN-4, IS-16098 (Part-II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bends, tee, reducers etc complete all as specified & directed. Make: Ultra plus DWCPE pipe of Supreme/ Corfit of Prince/ D-Rex DWC of Astral.
Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 4 complete all as specified and as directed.
M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (inner girth only to be measured) complete all as specified and as directed.
M&L PCC type B1 (1:2:4) using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
E/M Portion M&L for concealed point wiring with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed, multi-stranded copper conductor cable drawn through and including rigid non-metallic PVC concealed conduit of size 20mm dia, with all fittings, concealed in wall/roof /floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc. along with necessary MS sunken sheet metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified and directed by Engr-In-Charge. (a) One light/fan/ Exhaust fan point controlled by one switch 6 Amps 1 way. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour complete all as specified and directed by Engr-in-Charge. .
,---ditto--- all as per serial item No 122 above but for One 3 pin 5 Amp socket out let on same board.
,---ditto--- all as per srl item No.122 above but point wiring with 4 sqmm PVC insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let on independent board.
S & F Modular switch 6 Amp one way 230 V AC 1 module complete all as specified and directed by Engr-In-Charge.
S & F Modular switch 16 Amp one way 230 V AC 1 module complete all as specified and directed by Engr-In-Charge.
S & F Socket outlet, 6A - 2/3 pin combined 2 module, multi socket for all pins 230 V AC complete all as specified and directed by Engr-In-Charge.
S & F Socket 6A/16A - 2/3 pin combined 2 module multi socket for all pins 230 V AC complete all as specified and directed by Engr-In-Charge.
S&F Ceiling rose PVC polycarbonate, isolated body 3 terminals 230 V complete all as specified and directed by Engr-In-Charge.
S & F Sub main wiring with PVC insulated cable 2 single core 6 sq mm 1100 V grade with stranded copper conductor (for ups) on and incl rigid PVC conduit concealed in wall / roof/ceiling incl all specials like joint elbow, Tee, junction, bend etc and provision of PVC insulated copper conductor single core 6.0 sq mm for earth continuity all as directed. Note : Two run of single core PVC insulated multistraded copper conductor (FRLS) cable and one length of earth cable and one run of PVC conduit shall be measured and paid for one length
S & F factory made powder coated sheet metal enclosure Distribution board SPN 8 Way double door, protection class, IP 43, concealed in wall suitable for mounting MCBs/MCCBs fitted with copper bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply complete all as directed
S&F Residual Current Circuit Breakers of 40 A currrent rating 300mA sensitivity 2 module / 2 pole complete all as specified and directed.
S&F MCBs SP 6- 32Amp 10 KA in DBs (catered above) confirm to IS-8828 : 1996, IEC- 898 : 1995
S&F LED Innovative and compact batten luminaire of 20 watt compraising of thermally conductive material, pre wired with high efficiency electronic driver and high translucent frosted diffuser for glare free , anoised aluminium extruded luminare housing complete all as specified and directed, Make:cat No ENDURALINEARNEOBS20WLED865SPCWH of havells or equivlent in Bajaj /Phillips /wipro crompton
Supply and fixing of Aesthetically designed LED linear mirror light of 7 watt , comprising of high out put PMMA diffuser for glare free lighting and pre wired driver complete all as specified and direceted. Make: cat No. LCL-07-CDL of crompton or equivalent in Bajaj/ Philips
Supply and fixing of Aesthetically designed LED linear mirror light of 14 watt, comprising of high out put PMMA diffuser for glare free lighting and pre wired driver complete all as specified and direceted. Make: cat No. LCL-014-CDL of crompton or equivalent in Bajaj/ Philips
Supply and fixing of LED Bldg security light fitting Luminare of 30 Watt comprising of pre wired driver, pressure die cast aluminum housing heat resistant glass, with IP 65 protection complete with 1.5 meter suitable size GI tube and fixing clamps and 3 core copper cable complete all as specified and directed . Cat no. LSTS-30-CDL of crompton or equivalent in Philips/bajaj
S & F Exhaust fan 300mm sweep, 1440 RPM, Heavy Duty Exhaust Fan, metal body type with ISI, working on single phase, 230volt, 50Hz AC supply complete with Lovers and fixing acessories with insulated 3 core copper cable of size 0.75 sq.mm for connection complete as as directed.
S & F 20 amps single pole and neutral socket outlet with 2 pole and earth metal enclosed plug top in powder coated CRCA steel sheet enclosre recess mounted with chained metal cover for socket out let with and incl one no single pole MCB 20 Amps .
S&F water heater 25 litre capacity, BEE 5 star rating in approved colour, heating element 2.0 KW, adjustable temperature setting knob for temperature setting between 25° C to 75° C, outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insullation complete all as specified and directed.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.
Supplying, laying, connecting and testing steel water tubes 25mm bore, medium grade galvanised with all fittng laid in trenches or fixed in walls and ceiling or laid in floors of size complete all as specified and directed
M&L for cutting & screwing the existing line up to 80 mm dia and make new connection including all necessary item for leak proof conection complete.
M&L for costruction of valve pit chamber of size 900 x 900 x 1000mm including necessary excavation and earth work in any type of soil, PCC 1:3:6 in bed concrete, brick work in CM 1:6 with 10 mm thick plaster internally & 10 mm thick externally (above ground level) in CM 1:4, 3mm thick MS cover with hinges and locking arrangement, handle fixed to angle iron frame made out of 40mmX40mmX6mm MS angle including fabrication work hold fast duly painted with one coat of black bituminous paint of approved quality and including provn of 40 mm dia godrej lock coplete all as specified and directed complete all as specified and directed.
Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 25 Sqmm, 3.5 core laid in trenches, ducts, drawn through pipes across the road/ path /along poles / wall/ floors/ equipments etc including jointing and testing complete all as specified and directed by the Engr-in-Charge
M & L bricks for protection cover to UG cable (with old size sub class B bricks) with width equal to length of brick, laid dry and flat abutting each other with gaps between adjecent bricks not exceeding 10mm complete all as specified and directed.
Material and labour for sand cushioning to under ground electric cable all as per clause No 19.75 of MES SSR Part-I (1991) complete all as specified and directed.
S&F LT panel out door (kiosk type) type, weather & vermin proof MS sheet housing 3.15mm thick, powder coated over a coat of primer, double door, front & rear openable type mounted on 40X40X6 mm angle iron frame, floor mounted type with one MCCB 4 pole 63 Amps, 25 KA 415 volts as incomer and 2 No 40 Amp 25 KA MCCB as outgoint with copper bus bar 200 amp of length not less than 60 cm, 4 pole duly drilled with hole for cable connection, after due approval of panel drawing including PCC pedestrian of suitable size, making good the area complete all as specified and directed.
ABHOG INFRASTRUCTURE PRIVATE LIMITED
MSR INFRATECH
Shiv Construction Company
UNIVERSAL INFRAPROJECT PVT LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .