REPAIR AND MAINT OF INTERNAL WIRING INCL FITTINGS, FIXTURES IN TEMP ACCN AND SUMMER WINTER APPLIANCES LIKE ACS REFRIDGERATOR, GEYSER, VOLTAGE STABLIZER ETC AT OAF UNDER GE 970 EWS

Amount

Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, etc, removing the materials/debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including PVC Casing & Caping double lock type of as required width (not less than 20 mm in width) ISI marked medium grade white colour or Non metallic rigid PVC Conduit not less than 20 mm dia as per ground requirement with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switches, fan regulators etc for one light/fan/exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per item No. 2 here in before, but for one bell/buzzer point controlled by one bell push 5 Amp all as specified and as directed.

All as per item No. 2 here in before, but for one light point controlled by two 2-way switches all as specified and as directed.

All as per item No 2 here in before, but for one 3/5 Pin, 5 Amp switch socket out let on the independent board complete all as specified and as directed

All as per item No 2 here in before, but for one 3/5 Pin, 5 Amp switch socket out let on the same board complete all as specified and as directed

M & L for surface point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including PVC Casing & Caping (double interlock type) of as required width (not less than 20 mm in width) ISI marked medium duty, white colour with all accessories of same grade, fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC Box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed

All as per item No 7 here in before, but one switch socket combination 2 in 1, 3 pin, 5 and 15 Amp drawn through and inculding Non metallic rigid PVC Conduit not less than 20 mm dia fixed on surface of walls / ceilings etc complete all as specified and as directed

Taking down unserviceable any type of copper/aluminium sub main wiring of any type/size/core/ type complete including conduits/casing caping etc, removing the materials/debris and making good the disturbed surfaces of walls, floors and ceilings etc to match with the original existing finish complete all as specified and as directed.

M & L for sub main wiring with two runs of single core 2.5 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)

Description all as per item No 10 here in before, but two run of single core 4 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed.

Description all as per item No 10 here in before, but two run of single core 6 sqmm and one run of 4 sqmm cables as earth continuity conductor all as directed.

Description all as per item No 10 here in before, but four run of single core 10 sqmm and two runs of 6 sqmm cables as earth continuity conductor all as directed.

S & F in repairs Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed

S & F in repairs Switch Piano flush button single pole two way 5 A , 240 V complete all as specified and as directed

S & F in repairs Bell push flush button, single pole, one way, 240 V, 5 A complete all as specified and as directed

S & F in repairs Switch Socket Combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed

S & F in repairs Switch Socket Combination 5A, 2 in 1, 5 pin, 240 volts complete all as specified and as directed

S & F in repairs Socket outlet 2 in 1, 5A, 240 volts complete all as specified and as directed

S & F in repairs Socket outlet 5 in 1, 5/16A, 3 pin, 240 volts complete all as specified and as directed

S & F in repairs Switch Piano flush button single pole one way 15/16 A , 240 V complete all as specified and as directed

S & F in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

S & F in repairs Call bell ding dong AC, 230 volts, single pole all as directed

S & F in repairs Stepped type electronic fan regulator flush type as per exisitng model on the existing board all as directed.

S & F in repairs sheet metal enclosure SPN with a two pin and earth plug and socket complete with one SP MCB 20 Amps complete all as specified.

S & F in repairs MCB DB SPN 8 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.

Description as per item No 26 here in before but MCB DB SPN 4 way DB 230 V with 200 A rated busbar.

Description as per item No 26 here in before but MCB DB SPN 12 way DB 230 V with 200 A rated busbar.

Description as per item No 26 here in before but MCB DB TPN 4 way DB 415 V with 200 A rated busbar.

S & F in repairs MCB DB TPN, 8 way, (MCCB + 24 way O/G) double door, vertical type icluding one MCCB of 100 amps breaking capacity 25 KA , 4 pole without MCB complete all as specified and as directed

Supply and fix in repairs MCCB of 100 to 125 A breaking capacity 25 KA , 4 pole thermal megnetic release, compact type suitable for MCCB DB Vertical type as incoming in the existing DB's complete all as specified and as directed

S & F MCB TPN 40 to 100 amps 415 volts C curve, 50 HZ AC 10 KA, in repairs complete all as specified.

S & F MCB TPN 32 amps 415 volts C curve, 50 HZ AC 10 KA, in repairs complete all as specified.

S & F MCB SPN 32 amps 230 volts C curve, 50 HZ AC 10 KA, in repairs complete all as specified.

S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified.

S & F in repairs LED lamp 1 x 9/11 watts suitable for pin type batten/pandent holder complete all as directed.

Supply and fix in repairs Electronic ballast suitable for decorative fittings 1x36/40 W complete all as specified and as directed.

S&F in repairs Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repairs energy efficient surface Mounted LED Luminire 18/20 watts (4' long), with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed. Make : - Bajaj Cat No BCLSB 18 WH /NW or equivalent in Philips/CG/Havells)

S&F in repairs energy efficient surface Mounted LED Luminire 10 watts 2' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed. Make : - Bajaj Cat No BCLSB 10 WH / NW or equivalent in Philips/CG/Havella

S & F in repairs LED light fitting 1 x 36 watts white Ultra modern recess mounting luminaire of size 60x60 cm suitable for armstrong/grid ceiling in MS housing with high brightness LEDs complete all as directed. (Make : Bajaj Cat No BZRSQL 36W GZi WH or equivalent in Philips / CG/Havells/Wipro).

S & F in repairs 1 x 45 watts LED street light made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection for building security lights all as specified. (Make : Bajaj Cat No BRTFG 45W LED I or equivalent in Philips/Havells/CG)

Material and labour in repair for earthing complete with galvanized steel plate electrode 60cm X60cm X6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron, protected by galvanized steel pipe 15 mm bore (light grade) upto 57.5m & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 20mm thick RCC(1:2:4) type B-1 cover & frame etc) including GI protecton pipe for earth lead complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed.

Supply, laying and testing of LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 10 sqmm 2 Core fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed

Supply, laying and testing of LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 16 sqmm 2 Core fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed

Supply, laying and testing of LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 16 sqmm 4 Core fixed to poles/walls with suitable saddle & glands including taking out old cable complete all as specified and directed

M&L for opening the unserviceable/burnt ceiling fan 1200/1400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, testing and connecting for satisfactory run, complete all as specified and directed (NOTE:- Taking down/dismantling of ceiling fan and refixing after repair shall deemed to be include in this unit rate.)

Supply and fixing in replacement of ball bearing of the ceiling fan (any sweep) as per existing size incl greasing/oiling, complete all as specified and directed by engr-In-Charge. Make:- SKF/ NBC

Supply and fixing in replacement of gun metal bushes of suitable size for ceiling fan incl necessary mechanical work, complete all as specified and directed by Engr-In-Charge.

Supply and fixing in replacement of flexible cable, three core 1 Sqmm PVC insulated copper conductor cable for connecting ceiling fan, complete all as specified and directed. Make:- Plaza/ Polycab/ Havells .

Supply and fixing in replacement capacitor of of 2.5 MFD for ceiling fan, complete all as specified and directed.

Supply and fixing in replacement capacitor of 4 Mfd for exhaust fan, complete all as specified and directed.

Supply and fixing in replacement of ceiling fan blade set of three, heavy duty suitable for 1200/1400mm sweep of as per existing make as direcetd.

Supply and fixing in replacement of PVC canopy for ceiling fan 1200/1400mm sweep complete for existing various makes/model of fan, complete all as specified and directed.

M&L in repair for opening and cutting of old burnt copper winding of exhaust fan and rewinding of exhaust fan motor of sweep 450mm with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, re-assembling, testing and connecting for satisfactory run, complete all as specified and directed as specified and directed. (NOTE:- Taking down/dismantling of exhaust fan and refixing after repair shall deemed to be include in this unit rate.)

All as per srl item No. 55 here-in-before, but 300mm sweep -ditto-

Supply and fixing in replacement ball bearing of exhaust fan of any size/make as per the existing, complete all as specified and directed. Make: SKF/NBC

M&L for painting the exhaust fan including louvers of size 300/450mm sweep with two coats of synthetic enamel paint after cleaning and making the surface of oil/dust free, complete all as specified and directed.

M&L for servicing of geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet and assembling back the geyser including re-installation on wall with studs, nuts & bolts complete and testing after reconnecting electric and water connections, complete all as specified and directed.

Supply and fixing in replacement heating element for geyser of capacity 1.5KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed. Make:- Usha/ Bajaj/ Havells

Supply and fixing in replacement Heating element for geyser of capacity 2.0/3.0KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed. Make:- Usha/ Bajaj/ Havells

Supply and fixing in replacement thermostat for Geyser of capacity 25/35/50 ltr (long size) with temperature setting adjustment range from 40 to 85°C, ISI Marked, complete all as specified and directed. Make:- Philips/ Bajaj/ Venus

Supply and fixing in replacement geyser syphon assembly Set suitable for 25 ltr capacity geyser, fixed in replacement, as per existing complete all as specified and directed by engr-in-Charge.

All as per item Srl No. 63 above but for 35 Ltr capacity -ditto-

All as per item Srl No. 63 above but for 50 Ltr capacity -ditto-

Supply and fixing in replacement rubber gasket for water heater storage type of any capacity and suitable as per the existing, complete all as specified and directed

Supply and Fixing in replacement plug top 15/16 Amps for Geyser, complete all as specified and directed. Make:- Havells/ Anchor/Leader/Plaza

Supply and fixing in replacement PVC sheathed three core copper conductor flexible wire of size 2.5 Sqmm for connecting geyser, complete all as specified and directed. Make:- Finolex/Polycab/L&T

Supply and fixing in replacement of safety valve for geyser of 25/35/50 litre capacity, as per existing make complete all as specified and directed

Supply and fixing in replacement of non return valve 15mm dia for geyser of 25/50 litre capacity, complete all as specified and directed.

Supply and fixing in replacement heavy duty PVC connector 600mm long 15mm dia with PTMT nut for geyser of 25/50 litre capacity, complete all as specified and directed.

Supply and fixing in replacement copper inner tank of geyser capacity 15/25 litre and refilling of glass wool, refixing, connecting and testing, complete all as specified and directed.

All as per item Srl No. 72 above but for 35 Ltr capacity -ditto-

All as per item Srl No. 72 above but for 50 Ltr capacity -ditto-

Supply & fixing in repair stop cock brass 15mm dia, complete all as specified and directed.

M&L for preparation of surface of Geyser of capacity 25/35/50 Ltr by scraping, removing old paint etc and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fixing in replacement of GI anchor bolt 100mm long with nut and washer complete all as spcified and directed.

Supply and fixing in replacement of compressor fo refrigerator of 165 to 200 ltr capacity as per the existing complete all as specified and directed.

M & L for servicing and overhauling of regrigerator of 165 to 200 ltr capacity of various make and model complete all as specified and directed.

Supply and fixing in replacement of thermostat for refrigerator of 165 to 200 ltr capacity.

Supply and fixing in replacement of thermal relay for refrigerator of 165 to 200 ltr capacity.

M&L for Charging refrigerant R134A and testing for proper cooling and leakage complete for refrigerator of 165 to 200 ltr capacity all as specified and directed.

Supply and fixing in replacement of compressor fo refrigerator of 210 to 335 ltr capacity as per the existing complete all as specified and directed.

M & L for servicing and overhauling of regrigerator of 210 to 335 ltr capacity of various make and model complete all as specified and directed.

Supply and fixing in replacement of thermostat for refrigerator of 210 to 335 litre capacity.

Supply and fixing in repair of thermal relay for refrigerator of 210 to 335 litre capacity.

M&L charging refrigerant R134A and testing for proper cooling and leakage complete for refrigerator of 210 to 335 ltr capacity all as specified and directed.

Supply and fixing in replacement of compressor for deep freezer of 210 to 400 ltr capacity as per the existing complete all as specified and directed.

M & L for servicing and overhauling of deep freezer of 210 to 400 ltr capacity of various make and model complete all as specified and directed.

Supply and fixing in replacement of thermostat for deep freezer of 210 to 335 litre capacity.

Supply and fixing in replacement of thermal relay for deep freezer of 210 to 335 litre capacity.

M&L for Charging refrigerant R134A and testing for proper cooling and leakage complete for deep freezer of 210 to 400 ltr capacity all as specified and directed.

M&L for disconnecting the electric supply from the mains, transporting the window/split type air conditioner capacity 1.5/2.0 ton from original location to workshop to carry out the servicing complete and re-fixing at the original position after repairs and making the ACs fully functional and testing for satisfactory working, complete all as specified and directed.

Taking out old burnt/unserviceable compressor from the air conditioner 1.5/2.0 ton capacity and supply and fixing new compressor as per the existing, re-fixing in position incl testing satisfactory working complete all as directed.

M&L for charging refrigerant gas R134A in 1.5/2.0 ton capacity window /Split type air conditioner complete including testing for satisfactory working after flushing out and cleaning the surface with nitrogen gas for checking the leakage, complete all as specified and directed.

Supply and fix in replacement blower motor suitable for 1.5/2.0 ton capacity air conditioner all as directed.

Supply and fix in replacement thermostat suitable for 1.5/2.0 ton capacity air conditioner all as directed.

Supply and fix in replacement of running condenser 36 Mfd, complete all as directed.

Supply and fix in replacement of starting condenser 100/120 Mfd, complete all as directed.

Supply and fix in repair of relay suitable for 1.5/2.0 ton capacity air conditioner, complete all as directed.

Taking out unserviceable/burnt stabilizer of 3 KVA to 5 KVA capacity, rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, replacement of knobs, LED's etc. and making fully functional on load as connected to Refrigerator/Deep freezer/AC complete all directed.

All as per item Srl No. 101 above but for capacity 0.25 to 1 KVA -ditto-

Material and labour for servicing of 1 KW Hot water dispenser of capacity 20 Ltr including replacement of unserviceable parts i.e bushes, bearings, heating coil of cap , burnt cable and other essential parts to make the dispenser fully functional complete all as specified and drected.

Supply and fix in replacement of heat pillar of 2kw capacity including plug top 15 Amp complete all as directed.

M&L for Dismantling the complete fuel injector pump of water heating plant of various capacity upto 2000 ltrs, transporting to trade workshop for repairs and complete servicing and refixing the same after satisfactory repairs, reinstallation, testing and commissioning complete, all as specified and directed.

Material and labour for calibration and complete repair of fuel injection pump of water heating plant of various capacity upto 2000 ltrs, on work bench for fine spray and machining work and refixing the same for satisfactory functioning, complete all as specified and directed.

Supply and fix in replacement nozzle of hot water plant as per existing size complete all as specified and directed.

Supply and fix in replacement pressure meter suitable for hot water generator as per existing size complete all as specified and directed.

Supply and fix in replacement fuel filter suitable for hot water generator as per existing size complete all as specified and directed.

Supply and fix in replacement solenoid switch for hot water generator as per existing size complete all as specified and directed.

Supply and fix in replacement ball valve 15mm dia bore size complete all as specified

Supply and fix in replacement burner gasket suitable for hot water generator as per existing size complete all as specified and directed.

Supply and fix in replacement digital type electronic temprature gauge with thermostat control relay suitable for 2,00,000 K Cal/hr capacity hot water generator as per existing size and testing complete all as specified and directed.

Supply and fix in replacement photo ignition transformer suitable for hot water generator/plant as per existing size and testing complete all as specified

Supply and fix in replacement fire proof current lead suitable for hot water generator/plant as per existing size and testing complete all as specified.

Supply and fix in replacement indicator assembly, complete all as specified

Supply and fix in replacement bimetallic overload relay 4.0 - 6.5 Amps type ML complete all as specified

Supply and fix in replacement electromagnetic rod combined with positive/ negative terminals suitable for hot water generator of any capacity as per existing size and testing complete all as specified and directed.

Supply and fix in replacement photo censor suitable for hot water generator/plant as per existing size and make incl testing complete all as specified and directed.

Supply and fix in replacement USB relay box incl sequence meter suitable for hot water plant as per existing size and make incl testing complete all as specified and directed.

Supply and fix in replacement high pressure diesel/fuel pipe with internal and outer threads suitable for hot water generator/plant as per existing size incl testing complete all as specified and directed.

M&L for dismantling fuel tank of water heating plant, servicing, decarboning, cleaning, removing of of complete water plant and reassembling the same after cleaning properly by removing all deposited particles, dust, carbon etc, complete all as specified and directed.

Supply and fix in replacement 40mm dia safety valve as per existing complete all as specified

M&L for disconnecting and taking out burnt hot water plant blower motor, transporting to workshop, dismantling carefully, cutting out burnt windings, cleaning the slots and rewinding with super enamelled copper winding wire of appropriate gauge & weight incl all insulating materials, varnishing, drying, heating etc and incl replacement of ball bearings as per existing, reassembling and refixing at original site and testing, complete all as specified and directed.

Supply and fix replacement sensor board suitable for water heater 15/ 25 Ltr capacity complete all as specified and directed. Make :- Venus/bajaj/Usha

S & F in replacement water heater outer body cover along with glass wool insulation suitable for 25 ltr capacity as per existing make and model complete all as specified and directed

Ditto as per item No 126 here in before but of water heater capacity 35 ltr -ditto-

Ditto as per item No 126 here in before but of water heater capacity 50 ltr -ditto-

S & F in replacement Condensing unit suitable for outdoor unit of 1.5 / 2 TR Split/window type AC unit, complete all as specified and directed. Make : Voltas/Carrier/Hitachi

Supply and fix in replacement strainer drier for 1.5 ton window/ split type AC complete all as directed.

S & F in replacement cooling coil for refrigerator of any capacity complete all as directed.

S & F in replacement Freezer chest door suitable for any capacity refrigerator complete all as directed.

Supply and fix in replacement legs of refrigerator/water cooler of existing size/guage made of mild steel complete and applying anti rust paint complete all as directed.

S & F in replacement copper pipe for suction and discharge 5/8'' & 3/8" dia incl provn of new insulation over the pipes for split ACs complete all as directed.

S & F in replacement copper pipe for suction and discharge 1/2'' & 1/4" dia incl provn of new insulation over the pipes for split ACs complete all as directed

S & F in replacement new PCB unit (remote control) of 1.5 / 2 TR capacity of Split type AC unit of existing make & model complete all as directed

M/S Sultan Enterprises

FIRDOUS AHMAD BABA

ms new dar water star

M/S M.Y Enterprises

M/s GHULAM NABI HAJAM

M/S Noor Mohammad Shalla

M/s Jaipal Associates

Top Mind Industries Pvt Limited