Maintenance and Operation of Street Light and High Mast on Delhi PWD Road under PWD DHC , ND/Central, New Delhi (SH- Maintenance , Operation of LED Street Lights, High Mast Lightson various Roads under Jurisdiction of M-4512).

SH-I (Comprehensive Maintenance of Street Lights) Providing services for comprehensive and routine maintenance of following LED/HPSV street lights, high mast lights including LED strip light on existing pole with the help of using tower wagon of appropriate height along with all tools and tackles required for maintenance purpose complete with supplying and replacement of HPSV lamp, HPSV ingnitor, HPSV choke, pole wiring, pole connection box cover, feeder pillar accessories such as MCB, MCCB, contactors, relay, bus bar, astro timers, push button, indicating lights, selector switch, voltmeter, ammeter, earthing cover, connector, panel wiring, lugs, nutsbolts, LED driver etc. and to prevent theft of electricity from existing street light including dismantling/ shifting of damaged/ accidental/ tilted street light/ high mast poles from site to PWD Store (whenever required) complete with accessories complete as per Inventory-I, II & terms and conditions enclosed etc. complete as required. (a) LED Street Lights (1977 Points)

(b) LED High Mast Lights (215 Points)

(c) HPSV Street Light (2639 Points)

(d) HPSV High Mast Light (104 Points)

LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching)respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). (a) 200 watt

LED Flood Light, powder coated pressure die cast aluminum body (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66, IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq. mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (a) 250 watt

Less for credit of old dismantled street light/flood light under buyback arrangement complete as required.