OT-51/2025-26 of SE/GCC-II

Amount

Supply, fabrication,sand blasting & Zinc painting of 12 mm & 8mm Base plate including cost of all material, labour, lead, lift etc., complete as directed by the department Engineer at site.

Supply, fabrication,sand blasting & Zinc painting (125x65/ 100x50) and MS Channel , MS Angle various size including cost of all material, labour, lead, lift etc., complete as directed by the department Engineer at site.

Supply, Transport, loading and unloading of MS flat (65 x 10mm thick) for earth mat MS Flat (50 x8 mmthick) for earth raiser to site including the cost of all materials, transport, labour, lead, lift etc., complete as directed by the dept.Engineer at site.

Supply and fabrication of earth electrode 6.00mtr. Length. With 40mm MS Rod including transport and other cahrges and erection of earth spikes, including cost of MS Rod 40mm, transport,labour,lead, lift etc., complete as directed by the dept.Engineer at site

Labour charger for erection of structure including the cost of all labour ,lead,lift etc., complete asdirected by the dept.Engineer at site. Heavy section structure.(sectional weight 14 kg/m and above)

Labour charger for erection of structure including the cost of all labour ,lead,lift etc., complete asdirected by the dept.Engineer at site. Light section structure(sectional weight 14 kg/m and below)

Labour charges for Erection with own crane arrangement and connecting link rod ,SF6 Gas filling and other consumables and as directed by the Engineer. SF6 Circuit Breaker 110KV

Labour charges for erection with own crane arrangement including providing holes wherever required ,fixing junction box and other consumables and as directed by the field Engineer. 110KV CT(one single phase unit)

Labour for erection of CT/PT junction box including fabrication of clamp

Labour charges for erection and alignment of AB Switches including the cost of lubricant ,consumable and wiring (if necessary)checking of operation by both manual and electrical (if necessary) including the cost of all materials ,labour,lead,lift etc., complete as per standard specification. With earth hand operated -110KV

Labour charges for erection and alignment of AB Switches including the cost of lubricant ,consumable and wiring (if necessary)checking of operation by both manual and electrical (if necessary) including the cost of all materials ,labour,lead,lift etc., complete as per standard specification. Without earth hand operated -110KV

Labour charges for erection of LAS including the cost of all materials ,labour,lead,lift etc.,complete as directed by the dept.Engineer at site. 110 KV Station Type Single pole stack

Labour charges for erection of single pole stack upright or under hang suspension including the cost of all materials ,labour,lead,lift etc.,complete as directed by the dept.Engineer at site. 110KV

Labour charges for erection bus bar including fabrication and any modification of end clamp wherever necessary and the cost of all ,labour,lead,lift etc.,complete as directed by the dept.Engineer at site. Without making required bends. 75 mm IPS AL Tube

Labour for Providing jumpers and droppers including the cost of all labour,lead,lift etc.,complete as directed by the field Engineer at site.(Under Normal Condition )

Labour,machinereis,consumables for fabrication of earth electrode 10 mtr/ 6 mtr length or required length for yard including the cost of all abour ,lead,lift etc,complete as directed by the dept. Engineerat site

Labour machneries,consumables for erection of Earth mat & Earth raiser including the cost of labour,lead,lift,etc.,complete as directed by the dept Engineer at site.

Providing 140/150 mm dia bore including the all type of soil and erection of earth eiectrode ,supply and providing of A4 Grade Bentonite Powder with 5% common salt with available site clay soil 5 kg per meter depth in earthbore including the cost of all labour,lead,lift etc., complete as directed by the field Engineer at site.

Labour for erection of Panel. Simplex indoor/outdoor

Labour for laying of cable in duct /Trench including the cost of alminium tag foe indentification including the cost of all labour,lead,lift etc., complete as directed by the field Engineer at site.. Upto 8 core

Labour for laying of cable in duct /Trench including the cost of alminium tag foe indentification including the cost of all labour,lead,lift etc., complete as directed by the field Engineer at site. above 8 core

Labour for excavtion and refilling of trench of average width of 0.3 m and average depth of 0.8 m for earthmat and 0.4 m for laying of cable below fixed yard level and any size as required by field Engineer .

Labour for loading and unloading or shifting of materials without board crane (one operation). Non-Fragile

Labour for loading and unloading or shifting of materials without board crane (one operation). Fragile

Labour chargesfor painting earth raisers by green enamel paint (dulex,aian berger preferred)wherever required inclyding removal of dust ,rust using wire brush and painting brush etc,.inculding the cost of all labor,lead,lift etc., complete as directed by the dept Engineer at site.

Hire charges for crane provided (12 tonne) for any erection or loading,unloading or shifting of equipments done by department or by contractor.

Manufacturing and supply of bolt of required length of 18-20mm dia GI rod including cost of GI rod ans 2nos. GI nuts & washer as directed by the field Engineer. Grout bolt & eye bolt.

(a) Supply and provision of M8,M9,M10,M12, & M16 full thread GI bolt & nuts & washers GI various sizes for erection AB Switches & insulators and any other purpose wherever required and as dircted by the fIeld Engineer.

Supply and fixing of equipment board as directed by Executive Engineer including cost of all materials.

Manufacturing and supply of yard light, light box of size 200x175HX150D mm out of out of 18 SWG (1.2MM) MS Sheet with cable entry holes , fixing arrangement for fuse units and mounting clamp as directed by the field Engineer including the cost of all materials.

Supply and erection of LED Lamp 72 W Fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15Amps 2 way strip connector and other consumables

Labour charges for writing details & Earth values in finished surface boards including cost of enamel paint (dulex,asian berger,preferred )and other consumabes as directed by the field Engineer.

Supply and fixing of ISI Mark backlite HRC /Rewirable fuse holder in panel/boxes fro AC/DC/PT Crcuits wherever required as directed by the field Engineer 16 amps

Supply and fixing of ISI Mark backlite HRC /Rewirable fuse holder in panel/boxes fro AC/DC/PT Crcuits wherever required as directed by the field Engineer 32 amps

Supply and fixing of ISI Mark backlite HRC /Rewirable fuse holder in panel/boxes fro AC/DC/PT Crcuits wherever required as directed by the field Engineer 63 amps

Supply & fixing of ISI make MCB in panels/boxes. 1 Pole 16 Amps

Supply & fixing of ISI make MCB in panels/boxes. 3 Pole 32 Amps

Supply & fixing of ISI make MCB in panels/boxes. 3 Pole 63 Amps

Supply & fixing of ISI make MCB in panels/boxes. 2 Pole 32 Amps

Supply and fixing of mounting channel ,suitable for CBTM5 Terminal block in panel/box and as required and directed by field Engineer.

Supply and fixing of Nut Type terminal blocks suitable for CT Circuits in panel /box as required & as directed by the field Engineer.

Supply and fixing of Disconnecd Type terminal blocks suitable for CT Circuits in panel /box as required & as directed by the field Engineer.

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer. 19MM

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer. 25 MM

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer. 28 MM

Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer. 32 MM

Supply & termination of cable core end including the cost of cable socket (lug) ferrules straps etc as per cable schedule and as directed by field Engineer

Supply and fixing of godrej 6 lever navotal lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed by field Engineer.

Supply and providing of 600 mm mean dia ,300 mm height ,36 mm thick cement collar for identifaction of earth electrode location including 1 primer and 2 coat of colour wash as directed by field Engineer.

Supply and fixing of flexible copper tape/rope for interlinking panel earthling and foer any other purpose as directed by field Engineer.

Fabrication and fixing of bell mouth providing jumper connection in the solid core insulator/PT Insulators including the cost of GI Pipe 50 mm dia one meter & other consumables & as directed by the field Engineer at site.

Supply and erection of GI Steel Tublar pole for street light8 Mtr length single bracket pole with base plate (250x250x6 mm) 114.30mm ODX5.40 mm Thick x4500mm Length ,88.90mm OD X4.85mm Thickx1750mm Length , 76.10mm ODX3.25mm Thick x1750mm Length

Supply and fixing of Switch end clamp for Single Zebra

Supply and fixing of T clamp for 75mm Bus to Zebra

Supply and fixing of T clamp for zebra to Zebra

Supply and fixing of switch end clamp for 75mm Bus

Supply and fixing of seating block for 75mm Bus

Supply and fixing of free end clamp for 75mm Bus

Supply and fixing of 75mm Corona Bell

Transport charges for shifting of Departmant materials from various stores & other places to site, including all toll charges etc., (per trip upto 100Kms)

GST for bidders outside TamilNadu (IGST)