Renewal / Reconstruction of Painted Service Road from Yamuna First Stage Pump House Gate to Low Level Feeder Canal Km. 0.315 (Total Length 0.360 Km.)

Amount

WBM Grading- II Providing laying spreding and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80-100 Kn in stages to proper grade and camber applying and brooming stone screening to fill up the intrestices of coarse aggregate watering and compacting to the required density Grading II as per MORD specification clause 405.

WBM Grading- III Providing laying spreding and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheeled roller 80-1000 Kn in stages to proper grade and camber applying and brooming stone screening to fill up the intrestices of coarse aggregate watering and compacting to the required density Grading III as per MORD specification clause 405.

Prime Cost (Slow Setting) Providing and applying prime coat with bitumen emulsion of specified grade on the prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 Kg /sqm as per MORD specification

Track Coat Providing and applying tack coat with bitumen (VG-10) using emulsion distribution at the rate of 0.30 Kg /sqm on the prepared bituminous/ granular base surface cleaned with mechanical broom. As per MORD specification

20mm thick Open Graded Premix carpet using Bituminous Providing laying and rolling of open -graded premix surfacing of 20 mm thickness composed of specified size aggregates eitrher using penetration grade bitumen or cut -back or emulsion serve as wearing coarse on a previosly prepared base including mixing in a hot mix plant transportation to the site, laying with paver finisher to the required grade level and alignment and rolling with a smooth wheeled roller 80-100 kn capacity finished level and grades as per MORD specification.

Seal Coat Providing and laying seal coat sealing the void in bitumionous surface laid to the specified levels gtades and cross fall using Type C seal coat (As per MORD Specified Clause 510)

RAMDAS

BHAMAR SINGH