Painting Polishing Roller blinds sofa repairing and other misc civil work at cabin No401 and 405 of 4 th floor of shakti bhawan extn building lko

Amount

Laying and Jointing PVC Pipe. Heading

Repairng of old cushioned 3 seater Sofa at cabin no -405 of SB Extn building, removing of old damage upholstery then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, Approved. The work include cost of all labour,material T&P required for proper completion of work.

Scrapping old white or colour wash or distemper including disposal of refuse as directed by the Engineer-I/C within a distance of 60 M

Applying BIRLA PUTTY or equivalent putty on previousaly birla putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work

Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) .

Same as above in item no. 06 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint.

Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950

As in item 05 above but for every coat after first coat.

Spirit polish over new wood work after rubbing down the surface, with sand paper to give smooth and shining surface including cost of all materials, labour, T&P required for proper completion of the work.

Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. (CSI No. 8.57)

Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work

Supply and fixing brass polished godrej mortise lock of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work.

Existing old damage Tile nad Fixing New false ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work.

Providing & Fixing of Roller Blinds Johnson make of approved shade as per drawing & specification as approved by the Architect/Engineer-in-Charge.

Providing & Making & Fixing of Wall Panneling as per drawing frame work to be covered with 12 mm thick plywood from the help of fevicol,nails and screw. then making grooves with 6mm MDF Ply with the help of fevicol,nails and screw. The final surface to be finished with 1mm thick laminate and grooves to polished as per design.. as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work.

Providing & Making & Fixing of Wall Pannelingas on damaged surface The surface cladded with 6mm Water Proof & Fire Retardent ply fitted with the help of nails sulution on wall surface as per the approved design all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge.

AAKRITI ENTERPRISES

M/S OM SERVICES