REPAIR MAINTENANCE OF CERTAIN B AND R RELATED WORK SERVICES AT VARIOUS LOCATIONS IN CERTAIN MD ACCN AT CHAF BANGALORE

Amount

Taking down cement or cement lime plaster any description on brick or stone walls, over RCC slab, ceiling etc., including raking out joints, hacking for key, scrubbing down with water, etc., including necessary scaffolding complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 15mm thick on fair faces of brick works/ block works or concrete surfaces cement plaster 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for rendering 5mm thick cement plaster in cement mortar 1:3, on concrete sufaces as in ceiling/ chajja, finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered surfaces of wall and applying three coats of white wash through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered surfaces of ceiling and applying three coats of white wash through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1mm thick wall care putty complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1mm thick wall care putty on ceiling complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of walls including pillasters, cornices, etc., by washing, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying two coat of distemper oil emulsion through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment on wall surfaces and appling two coats of distemper oil emulsion through mechanical means over a coat of 1mm thick wall care putty complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of walls including pillasters, cornices, etc., by washing, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat of distemper oil emulsion through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of ceiling including cornices by washing down, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying two coats of distemper oil emulsion through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment on ceiling surfaces and appling two coats of distemper oil emulsion through mechanical means over a coat of 1mm thick wall care putty complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of ceiling including cornices by washing down, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat of distemper oil emulsion through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of walls, including cornices, pillasters, etc., by washing, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying two coats of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment on wall surfaces and appling two coats of white wash through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of walls, including cornices, pillasters, etc., by washing, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of ceilings by washing, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying two coats of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment on ceiling surfaces and appling two coats of white wash through mechanical means complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping including filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat of white wash complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and fix health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm bore fancy type chromium plated stop valves, cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm CP wall mixer with bend pipe for over head shower connecting legs and wall flanges for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed by Engr-in-charge. Make: Cera Cat part No.F2014401 or Techno-commercially equivalent in Prayag/ Somany/ Parryware/ Hindware

Supply and fix in repairs 15mm CP sink mixer (wall mounted) with 150mm long swivel spout connecting legs and wall flanges for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed by Engr-in-charge. Make: Cera Cat part No.F2014511 or Techno-commercially equivalent in Prayag/ Somany/ Parryware/ Hindware

Supply and fix in repairs CP soap tray fixed to wall with chromium plated brackets/ screws complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs conner glass shelf (medium) 225x225mm side consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and as directed by Engr-in-charge. Make: Cera Cat part No. F5005102 or Techno-commerically equivalent in Prayag/ Parryware/ Hindware/ Somany

Supply and fix in repairs chromium plated over head shower rose 125x125mm dia with arm size 200mm long and wall flange, including fixing to steel pipe or union complete all as specified and as directed by Engr-in-charge. Make: Cera Cat part No. F7020111AB or Techno-commercially equivalent in Prayag/ Somany/ Hindware/ Parryware

Supply and fix in reparis 15mm bore CP pillar cock with swan neck spout (left) and aerator, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. Make: Cera Cat part No.F2002105 or Techno-commercially equivalent in Prayag/ Hindware/ Parryware/ Somany

Supply and fix in reparis 15mm bore CP sink cock (wall mounted) with 150mm long swivel spout and wall flange, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. Make: Cera Cat part No.F2014261 or Techno-commercially equivalent in Somany/ Prayag/ Hindware/ Parryware

Supply and fix in repairs bathroom cabinet mirror of moulded PVC of size 431.80x355.60mm including fixed to wall complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 15mm bore fancy type chromium plated two in one bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair stainless steel plate rack made out of 1.00mm thick sheet 900x900x200mm complete all as specified and as directed by Engr-in-charge.

Grinding and polishing of existing terrazzo tile floorings using mechanical means including filling the openings/ joints using white cement mixed with pigments as required to achieve the desired finish and finishing with oxalic acid complete all as specified and as directed by Engr-in-charge.

Grinding and polishing of existing vertical terrazzo tile surfaces such as dados, skirting, etc., including filling the openings /joints using grey or white cement as required to achieve the desired fnish and finishing with oxalic acid complete all as specified and as directed by Engr-in-charge.

Dismantling floor hearth or wall tiling including cement mortar bedding and backing coat plastering of any thickness removing serviceable tiles to store and rubbish off premises etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Material and labour for glazed ceramic tiles coloured of size 350x250x7mm /450x350x7mm thick thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles with 10mm thick rendering CM 1:4 for laying wall finishes complete all as specified and as directed by Engr-in-charge.

Demolition of stone slabs and tiles laid bedded and pointed in cement mortar of any description or thickness in floors, aprons etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including the like laid over cement mortar 1:4, 20mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match including grinding and polishing complete all as specified and as directed by Engr-in-charge.

Material and labour for rounding to edges of granite /stone slab such as in steps, cooking platform and other similar situations etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for 25mm thick cement concrete type B-1, 1:2:4 (Using 20mm graded stone aggregate) in sub floors and finishing cement concrete surface even and rough complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level complete all as specified and as directed by Engr-in-charge. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost.

Material and labour for welding mild steel members of thickness not exc 6mm as in repairs, welds exc 2.5cm not exc 5cm in length complete all as specified and as directed by Engr-in-charge.

Material and labour for welding mild steel members of thickness not exc 6mm as in repairs, welds not exc 2.5cm in length complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys, including cutting holes into existing pressed steel frames complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with beads or stainless steel wire staples complete all as specified and as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins /spring clips glazed with putty and removing materials from site of work complete all as specified and as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and removing materials from site of work complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Supply and fix for 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-charge.

Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and as directed by Engr-in-charge.

Material and labour in repairs for second class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, fixed with screws of size exc 13 sqcm and not exc 25 sqcm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs 18/19mm block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed by Engr-in-charge.

Supply and fix for 0.90mm decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed by Engr-in-charge.

Material and labour in repiars 18/19mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium frame work as in panel, etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed by Engr-in-charge.

Taking down steel window /ventilator (without taking off shutter from the frame) of any size, making good disturbed surfaces and removing materials from site of work complete all as specified and as directed by Engr-in-charge.

Dismantling existing alumiinuim doors/ sliding doors /aluminium partition etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for powder coated aluminium sliding windows of three tracks outer frame top, side sections, bottom frame (track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh (total 3 Nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40x18x1.5mm including glass 5mm thick and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for powder coating (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for anodised aluminium grill (anodised transparent or dry required shed according to IS: 1868 with minimum anodic coating of grade AC15) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass /stainless steel screws @ 200mm centre to centre, including cutting to grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs harrison curtain rails of anodised aluminium alloy with fixing brackets, stops, rollers etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs floor door stopper aluminum alloy and tounge, anodised over all length of cover plate 140mm, with hard drawn steel spring complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames not exc 1.5 sqm with shutter (without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and stacking at site where directed complete all as specified and as directed by Engr-in-charge.

Material and labour for forming jambs, with cement mortar 1:6 etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete all as specified and as directed by Engr-in-charge.

Supply and fix solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15x15mm MS square tube inside the 19x19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6 Nos screws to be provided for each frame complete all as specified and as directed by Engr-in-charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, with particle board core supplying and fixing in frame at site complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm long extruded aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-22 complete all as specified and as directed by Engr-in-charge.

Supply and fix for 125mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge.

Supply and fix for 125mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engr-in-charge.

Supply and fix for 75mm long brass handle, cast type, polished bright fixed with nuts and screws to cupboard shutter complete all as specified and as directed by Engr-in-charge.

Supply and fix for 125mm aluminium anodised hasp and staple, safety type fixed with screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and as directed by Engr-in-charge.

Removing demolished material i.e., building material concrete debris of any type etc., to a distance of 9 KM beyond and upto 10 KM out of premises of metropolition area including loading, unloading by manually or by mechanical means (JCB and to be transported through trolly or tipper and staking at the destination as and when during execution) complete all as specified and as directed by Engr-in-charge.

M/S Suresh Raju (BID ID -3502257)

M/s BHOOMI ELECTRICALS (BID ID -3501763)