PROVN OF SHED AT MAIN GATE LADIES WASHROOM AT AIR WARRIOR CLUB ALUMINUM DOOR AND WINDOWS AT SNCOs MESS AND SPECIAL REPAIR TO INTERNAL WIRING OF MURALI HALL AND DSC MESS ALONGWITH CONNECTED ITEMS AT DINJAN UNDER GE (AF) MOHANBARI

Amount

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavating over areas, exc 1.5 m but not exceeding 3.0m deep and getting out in hard/ dense soil complete all as specified and directed.

M&L for broken stone as hard core of gauge n,exc 63mm, deposited, spread and leveled in layers n,exc 150mm thick, watered and rammed to true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for formwork to sides of rough finished concrete surfaces of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

M&L for formwork rough finished surfaces of concrete to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for RCC M-25 Design Mix Concrete in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 Design Mix Concrete in columns, pillars, piers, posts and struts complete all as specified and as directed.

M & L high strength deformed TMT steel bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L High strength deformed TMT steel bars 8mm dia and over as in stirrups cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well raming in layers, not exc 25cm thick complete all as specified and directed.

Removal of surplus soil to a distance not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, of grade FE-410-W (Gde-E-250) quality-B, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e within 20mm of the length indicated) complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc. using ERW or induction butt welded tubes conforming to IS 4923:1997 (With latest amendment) complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-290(Gde E-165) complete all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290(Gde E-165) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing for 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet having tensile strength of 550 Mpa as in ridge and valley gutter fixed with self taping screws complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Aluminnium composite panel (ACP) of 3mm thick panel with 0.25mm aluminium cover sheet thickness, any colour complete all as specified and directed.

S&F 450mm high Steel letters of 204 Grade SS Sheet at height 8.00m complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and not exc 1.5m depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

M&L for formwork rough finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for RCC M-25 Design Mix Concrete in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L Brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete 1:2:4, Type B-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) 100 mm thick , as in path/ pavement/ floors finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) 75 mm thick, as in sub base of floors finished even and smooth without using extra cement complete all as specified and directed.

M&L Decorative type ceramic wall tiles 8-10mm thick of size 600mm x 300mm laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L Heavy duty Endura tiles of size 600mm x 600mm, 8-10mm thick laid in floor over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site to at any distance outside MD land complete all as specified and directed.

M & L Brick work with flyash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L Brick work with flyash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of cement based primer of any tint/shade including washing floors, etc of drops and splashes complete all as specified and directed.

M&L 25mm thick PCC 1:2:4, Type B0 (using 12.5mm graded stone aggregate) as in sub base of floors complete all as specified and directed.

S&F 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed.

S&F 25mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F of Stop Valve (angle valve) 15 mm dia CP Fancy type cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm dia fancy type pillar taps, cast copper alloy with capstan heads chromium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing of two way tap consisting angle valve to control water suitable for jet cleaner 15 mm dia CP, complete all as specified and directed.

S&F health faucet CP brass with minimum 1.50 m long CP flexible pipe, Hose & Wall Hook connection etc, complete all as specified and directed.

S&F for PVC Connections 15 mm dia and 600 mm long suitable for pipe with PTMT nut complete all as specified and directed.

S & F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges complete all as specified and directed.

S&F PVC flushing cistern 10 Ltrs capacity, valveless, syphonic action type, low level white with inlet, ball valve, float and handle complete including brackets and connection to pipe including dismantling of existing CI flushing cistern incl flush pipe complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) white with 'P' or 'S' trap front or back inlet complete all as specified and directed.

S&F Vittreous China Wash Basin white coloured flat back of size 550 mm x 400 mm including bracket complete all as specified and directed.

S&F brass soap dish of Make : Jaquar Cat No 21731 or equvailent from other specified makes complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour glazed ceramic coloured tiles, 350 mm x 250 mm x 7mm/ 450 x 350 x 7mm thick, in dado/ skirting on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

Supply and fixing Aluminium handles, cast type anodised, 150 mm long complete all as specified and directed.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed.

S&F aluminium anodised sliding door bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for Anodised aluminium window and ventilator shutters, sliding or fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified with powder coating not less that 50 micron complete all as specified and directed.

Supply and fixing 4 mm thick figured glass,pin head type, in squares not exceeding 0.5 Sqm and fixed in aluminium shutters, glazed with oil putty complete all as specified and directed.

M&L for Anodized aluminum frame for doors, windows, ventilators with one or more rebate with powder coating not than 50 micron including joining cleat for fixing etc complete all as specified and directed.

M&L for Anodized door shutters, aluminum section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle four No’s in each door, hinges anodized aluminum snap beading screws etc complete all as specified with powder coating. Thickness not less than 50 micron complete all as specified and directed.

Supply and fixing in repair Mortice lock , 2 lever ,vertical type , size 100mm, complete all as specified and directed.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares exceeding 0.5 Sqm and fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified and directed.

Taking down carefully aluminium/ copper point wiring (light, fan, socket, power point) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified and directed.

Material and labour for point wiring with 1.5 Sqmm PVC insulated and unsheathed copper cable 1100V, FRLS grade multistranded drawn in and including 20mm dia PVC conduit in walls/ceiling with tee, bend, elbows,junction box etc. with provision of PVC insulated 1.5 sqmm copper conductor cable as earth continuity including 2.0mm thick pre fabricated galvanised boxes with white modular cover plate of suitable size for fixing modular switches, sockets regulator and connected the earth wire to common earth dolly for following point controlled by one switch complete all as specified and as directed.

Light/ Fan/ Bell point controlled by one switch

One socket outlet, three pin, 5/6 Amp, on same board.

One socket outlet, three pin, 5/6 Amp, on independent board.

All as per item No 68 here in before but 4.0 sqmm PVC insulated unsheathed cable with stranded copper conductor for 6 pin, 6/16 Amp switch socket combination on independent board complete all as specified and directed.

Supply and fixing of Socket, 6A - 2/3 pin combined 2 module, 230 volt, multipurpose complete all as specified and directed.

Supply and fixing of Socket 6A/16A - 2/3 pin combined 2 module, 230 volt, multipurpose complete all as specified and directed.

S&F ceiling rose 3 terminal/ PVC/ polycarbonate, isolated body, surface type complete all as specified and directed.

Supply and fixing of modular fan regulator step type, 120W - 2 module complete all as specified and directed.

Supply and fixing Modular switch 1 way 6A, 1 module single pole complete all as specified and directed.

Supply and fixing Modular switch 1 way 16A, 1 module single pole complete all as specified and directed.

S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed.Make :- Havells/CG/Wipro/GE/Phillips

S&F in repair of recessed mounted 36 Watt (Warm white) LED panel light 2x2 feet, ultra slim design, 230 volts, 50 Hz with CRCA sheet housing precoated white colour and high quality diffuser for uniform light and high efficiency with separate replaceable electronic driver including lamp complete all as specified and directed.Make :- Havells/CG/Wipro/GE/Phillips

S&F in repair recessed mounted LED light of round type, minimum 1200 Lumen (12Watt ) warm white with all accessories internally prewired and including connecting up with twisted copper conductor cable of suitable size complete all as specified and as directed. Make :- Havells/CG/ Wipro/ GE/ Phillips

S&F in repair LED step luminaire environmental friendly, ultra modern, energy saving, surface mounted, decorative type luminaire comprising of high brightness LEDs 07 Watt, 230 Volts, 50 Hz including lamp, connection wire complete all as specified and directed. Make :- Havells/CG/ Wipro/GE/ Phillips

S&F in repair LED Track mounted LED light with modern design, compact size with High power COB LED to provide focussed light integrated LED ensures long-lasting and energy-efficient with environmental friendly, ultra modern, energy saving, including surface mounted on track of suitable size and shape , decorative LED luminaire comprising of high brightness LEDs 15 Watt (warm white) , 230 Volts, 50 Hz including lamp, connection wire complete all as specified and directed. Make :- Havells/CG/Wipro/GE/Phillips

S&F in repair LED spot luminaire crafted from Aluminum Die Cast with Four-Directional Beam withintegrated LED ensures long-lasting and energy-efficient with IP65 Protected environmental friendly, ultra modern, energy saving, surface mounted, decorative LED luminaire comprising of high brightness LEDs 07 Watt (warm white) , 230 Volts, 50 Hz including lamp, connection wire complete all as specified and directed. Make :- Havells/CG/Wipro/GE/Phillips

S&F building security light LED type of minimum 2500 Lumens (25watts) pressure die cast aluminium housing IP 66 protection with all accessories internally prewired and including connecting up with twisted copper conductor cable of suitable size including bracket made of 32mm dia GI light grade pipe of 1.2m long bent to shape fixed with suitable MS clamps, bolts, nuts and washers duly painted including taking down old fittings complete all as specified and directed. Make :- Havells/CG/Wipro/GE/Phillips

M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC conduit medium grade of required size complete all as specified and directed. ( For AC Points)

M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including PVC conduit medium grade of required size complete all as specified and directed.

M&L in repair for sub main wiring with 5 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including PVC conduit medium grade of required size complete all as specified and directed.

Supply and fixing in replacement of Factory made sheet metal enclosure for VTPN DBs double door (Fixed flush to the wall), suitable for 250 Amps MCCB as incommer & outgoing as TPN 415 volt, 8 Way, IP-43 protection with 300 Amp rated bus bar and 4.0 Sqmm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified and directed. (Note :- MCCB/MCB will be measured and paid separately under respective items)

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, TPN, 415 volt, 4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 8 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity with connection and testing complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity with connection and testing complete all as specified and directed.

Supply and fixing in repair of 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps current carrying capacity with connection and testing complete all as specified and directed.

Supply and fixing in repair of 415V 10KA 'C' curve miniature circuit breaker (MCB) TP 63 Amps current carrying capacity with connection and testing complete all as specified and directed.

S&F in repair of sheet metal enclosure, single pole and neutral with two pin and earth plug and socket, 20 Amps, 230 Volts, 50 Hz complete with and including one single pole MCB of 20 Amps, 10KA, 230 volts, 50Hz, C curve type complete all as specified and directed.

Supply and fixing in repair of 415V 16KA curve MCCB TPN 200 Amps current carrying capacity with connection and testing complete all as specified and directed.

Supply & fixing in replacement of plastic body ventilation fan of 200mm sweep complete all as specified and directed.

S & F in repair UPVC panel trunking system 75mm width, 75mm depth elongated flexible botom mounting fixed with and including necessary end joints, T bends and other accessories, clamps, nuts, bolts fixed to walls / ceiling and top cover of 75mm width complete all as specified and directed.

S & F in repair UPVC panel trunking system 45mm width, 45mm depth elongated flexible botom mounting fixed with and including necessary end joints,T,bends and other accessories, clamps, nuts, bolts fixed to walls / ceiling and top cover of 45mm width complete all as specified and directed.

Supply, laying, jointing and testing cable XLPE Insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.

Supply and fixing of GI Pipe of 50 mm dia light grade for cable protection pipe with and including GI/MS clamp and nut, bolts of suitable size complete all as specified and directed.

Material and laboul for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 20 cm girth complete all as specified and directed.

Preparation of newly plastered surfaces of any description and any grith, not otherwise described and applying Birla putty on wall surface 3mm thick to achive even and smooth suface and aplying two coats of oil bound distmper over a coat of primer complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 4mm galvanised iron/GI wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI wire of 4mm dia earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type B1 cover slab 54cm x 54cm x 5cm reinforced with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.

Supply, laying, jointing and testing cable XLPE Insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed.

Supply and fix of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 205 x 255 x 112 mm suitable for 10/16/25 sqmm cable fixed to pole/ wall with suitable FI clamp 20X3 mm nuts, bolts and washers including provision of 01 No MCB, single pole, 240 volts, 10 KA 16 Amps, and suitable aluminium bus bar/ connector complete all as specified and directed.

Supply and fixing of PVC insulated and PVC round sheathed, copper conductor industrial cable 1.5 sqmm, 1100 volts grade, three core of copper conductor including PVC conduit of 20mm dia medium grade for connection of highbay/spot lights etc. fittings on pole/ wall/ pillar/ from over head conductor / junction box / DB including termination clip complete in all respect all as specified & directed.

Supply and fixing of LED high bay round light 100 W, 230 volts, 50 Hz, made up of pressure diecast aluminium constructed, new generation energy saving and environmental friendly long life LED with 10KV SPD and ingress protection of IP66 & high power LED as lighting source and lens embedded PC cover having driver compartment suitable for mounting truss of building including GI bracket of suitable size and shape etc complete all as specified and directed.

Supply and fixing of LED spot light 15 W, 230 volts, 50 Hz, luminaries new generation energy saving decorative and environmental friendly long life LED with ingress protection of IP66 & high power LED as lighting source and lens embedded PC cover suitable for mounting truss/Chanel etc of building including GI bracket etc complete all as specified and directed.

Supply and fixing of GI Pipe of 25 mm dia light grade for cable protection pipe complete all as specified & directed.

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying and stretching the cable complete all as specified. Note: Punned thickness of sand shall be measured & paid.

M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick including taking out old complete all as specified and directed.

M/S. UDDUG CONSTRUCTION

M/S D G ENTERPRISE

M/S CHAKRA GOHAIN

HIND CONSTRUCTION

M/s PRABIR ENTERPRISE

KP GHOSH AND CO

R K CHAKRABORTY AND CO