Construction of Multipurpose community centre building at Ward no-14 Sonepur Municpality,odisha

Earthwork in excavation in hard soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge Hard soils.

Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-Charge.

Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).

Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height.

Providing and laying plain cement concrete 1:2:4 (1 cement: 2 sand: 4 stone aggregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height.

First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge Sub Structure

Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge (Ground floor).

Terrace floor

Half brick work with Fly Ash brick masonry in cement mortar (1:4) in super structure having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties and taxes of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in- Ground floor

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position Footing. (Footing)

Column up to Plinth and pedestal

Plinth Beam

Column above plinth ( Roof Level)

Roof Beam

Roof slab

Staircase

Terrace Floor (Column up to Roof beam level)

Roof Beam

Roof Slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG)/JINDAL PANTHAR/SAIL/SEL TIGER/SHYAM STEEL make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.Ground floor

Terrace Floor

12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.Ground floor

First Floor

16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights Ground floor

First Floor

6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights Ground floor

Terrace Floor

Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm vertified floor tile of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) Ground Floor

Supplying, fitting & fixing of 10 mm thick and size of 600x600 mm vertified wall tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. Ground floor

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge.

Providing and fixing seasoned sal wood work in frames at any locations including doors, windows,cupboard, clerestory and other frames fixing in position including cost of hinges, M.S. flat (30mm x 6mm) hold fasts lugs or dash fasteners of required dia and length as per drawing / specification, at all floors and all heights Ground Floor

Factory made 30mm/32mm flush door shutter (nonsal hard wood framefixed with 4mm BWR ply on both side of frame) with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect Ground Floor

Providing and fixing factory made 2 track 2 panel Kommerling Upvc white colour sliding window comprising of Upvc multi chamfered frame having section frame 58mmx 49 mm ,window sash 37mm x 61 mm ,made out of lead free green profile with corners fusuin weled ,fully reinforced with Galvanized steel 1.5/2.0 mm .Thge windows profile should fulfill the requirement of Viny 2010 .Temperature ,density ,tensile stregth ,hardness ,weathereability ,impact strength and Modulus of Elasticity should be tested in accordance with ASTM/Din-iso Standards and the thermal conductvity as per IS standards .The window comprising of upvc extruded glazing beads of approciate dimension ,EPDM,gasket ,GI Fastener 100 mmx 8 mm size for fixing frame to finished wall ,plasticv packers plastic caps and neceessary stainless steel . ( Ground floor)

Terrace Floor

Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge Ground Floor

Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge Ground Floor

Terrace Floor

Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. Ground floor

Terrace Floor

Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge ground flooor

Terrace Floor

Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.Ground Floor

Terrace Floor

Painting two coats with plastic emulsion paint Royale shyne over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering ,applying putty whrerever necessary & cost of scaffolding ,staging charges with all cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge. .Ground Floor

Terrace Floor

Painting two coats with approved Enamel Paint on Steel work in Ground Floor Ground Floor

Painting two coats with approved Enamel Paint on Wood work in Ground Floor

2.5 cm thick grading concrete (1 :2:2) on roof slab with 6.7 mm & down grades size hard granite crusher broken chips on new work in Terrace floor.

Earthwork in excavation in hard soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush, shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge Hard soils.

Supplying and filling sand in foundation and over areas including watering, ramming, consolidating and dressing, labours, tools, taxes etc. all complete as per the specification and direction of Engineer-In-Charge.

Diluting and injecting chemical emulsion (to be supplied free of cost at site of work) for PRE CONSTRUCTIONAL Anti-termite treatment and creating a continuous chemical barrier under and all-round the column pits, wall trenches, basement excavation, top perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. complete as per specifications (plinth area of the building at ground floor only shall be measured for payment).

Providing and laying plain cement concrete 1:4:8 (1 cement : 4 sand : 8 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height.

Providing and laying plain cement concrete 1:2:4 (1 cement: 2 sand: 4 stone aggregate 12mm nominal size) as levelling course in foundation and plinth etc. including tempering, curring, shuttering etc.complete all depth and height.

First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge Sub Structure

Aerated autoclaved fly ash (AAC) Bricks/masonary in filler/inside walls using A.A.C blocks of size 625mm*200mm*200mm Having Compressive strength not less than 4N/mm squre conforming to IS 2185(part-3)-2005 and IS-6441-1972 in cement mortar of mix(1:6) and screend and washed sand for mortar for use in super structure including splays cutting,circular moulding ,corbelling chamfering and similar such type of works, watering and curing eytc including cost conveyance royality loading unloading and taxes of all materials cost of all labour scaffolding sundries,T&P requried for the works etc complete in all respect as directed by the enginner in charge

FOOTING

column up to Plinth

Plinth Beam

column above plinth ( Roof Level)

roof beam

roof slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG)/JINDAL PANTHAR/SAIL/SEL TIGER/SHYAM STEEL make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.Ground floor

12mm cement plaster to out side of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.Ground floor

16mm cement plaster to inside of brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights Ground floor

6 mm cement plaster on RCC surfaces at ceiling/slab soffit and other locations with cement mortar of mix 1:4 (1 cement : 4 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights Ground floor

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.40 sqm. (20mm thick) of approved make in floors laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry including cost of all materials, labour T&P etc. required for the work all complete incl. rubbing as per direction of the Engineer-in-charge.

Supplying, fitting & fixing of 10 mm thick & size of 600x600 mm vertified floor tile of matt finish with veilcraft (VC/FT ) shield( Scratch free/stain free) with water absorption limit between 0.08% to 3% and conforming to IS : 15622:2006 (Group B Ib). laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) Ground Floor

Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. Ground floor

Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface over a coat of wall primer(ISI) water bound including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge ground flooor

Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.Ground Floor

Painting two coats with plastic emulsion paint Royale shyne over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering ,applying putty whrerever necessary & cost of scaffolding ,staging charges with all cost of labour, T&P required for the work etc. complete for all floors as per specification & direction of the Engineer-in-charge. .Ground Floor

GROUP-A

GROUP-B

GROUP-C

Group control of point in Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Make- Finolex/Anchor/Polycab/HAVELLS or equievalant reputed make A catagory ISI marked as approved as approved 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Kinjal or equievalant reputed make A catagory ISI marked as approved with 6A modular type((anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved of modular type G.I box with metallic cover plate (both side)(anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Recessed wirring to group control light point/ fan point call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make A catagory ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/Havells or equievalant reputed make A catagory ISI marked as approved 6A Piano type ( flame retradant type) switch ISI marked Make-Havells/Schneider/legrand /Panasonic/Anchor or equievalant reputed make & model A catagory ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider/legrand) /Panasonic Vision or equievalant reputed make & model A catagory ISI marked as approved of suitable size, GI box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.

Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision)or equievalant make & model ISI marked as approved , complete suitable for office standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 2x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make & model A catagory ISI marked as approved, (For equipement power)complete suitable for office standardoffice.(Maximum 02 nos point in one circuit).All the switch 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) or equievalant reputed make A catagory ISI marked as approved, (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.

2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty flexible conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit.(BDB to LSB/LIGHT CKT/5A PLUG/INVERTER POINT TO EACH QTR) (2X2.5+1X1.5)

4 nos single core 2.5 sq. mm copper wire for phase and neutral and 02 nos of single core 2.5 sq. mm copper wire for earth continuty conductor .in 25 mm dia non metallic heavy duty flexible conduit(LDB to LSB/5A SOCKET) (4X2.5+2X2.5)

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty flexible conduit .(PDB to PSB/ GAYSER POINT/AC POINT/ROOM LIGHT CONTROL TO CORRIDOOR POINT/DG PANEL ESSENTIAL LOAD) (2X4+1X1.5)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. 20mm dia C - PVC pipe

25mm dia C - PVC pipe

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.( 32mm dia PVC ASTM pipe (sch-80)

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)

15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)

15 mm dia CP S.B. Bib cock(CON-CHR-037KN)

20 mm dia consealed stop cock (CON -CHR-037KN)

25mm dia brass full way valve (Shakti make)

32mm dia brass full way valve (Shakti make)

15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)

15mm CP Extension piece

125mm CP grating

15mm size C.P. flange

Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 1000 liters capacity PVC water storage tank

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )

Supplying all materials ,labour ,T & P and fixing glazed earthenware squatting plate of size 600mm x350 mm with integral longitudinal flushing pipe including embedding the plate in 25 mm cement moortar (1:8) laid over 150mm cement concrete (1:5:10) using 40 mm hard granite metal all complete as per specification and dirrection of the engineer in charge

Supplying all materials laboiur ,T & P and fixing Flat back lipped wall (Mini stall urinal -630 mm x180mm ) urinal following sizes including connecting the urinals with 32 mm .dia pvc waste pipe 910mm long by dome waste ,15 mmdia CP spreader incuding cutting hjoles in walls and making good the damages with supply of wooden plugs ,screws and cement etc.all complete as per specification and dirrection of engineer in charge Half stall urinal

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge Under Counter basin(560x450)Hindware-No.10095

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Towel ring

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.Large Size mirror with Frame (6x0.90x0.75)=

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder

Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size 76cmx76cmx46cm with 18” dia RCC MH cover

Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 25.87 x 0.10

Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 30cmx30cm Toilet Block - 2.53 x 3.25 x 2 Passage - 6.50 x 1.45

Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) Kajaria/Somany/Johnson tile 45cmx30cm Toilet Block - 2 x (2.53 + 3.25) x 2 x 2.10

Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 6 x 0.76 x 2.10

Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge 6 x 4.96

Supplying all materials ,labour ,T & p AND LAYING IN TRENCHES ( TO LEVEL OR SLOPE ) un plasticized PVC pipe confirming to IS 4985/2000 of the following side dia for class -3 (0.60 mpa) INCLUDING JOINTING WITH SUPPY OF APPROVED SOLVENT CEMENT BY NON HEAT APPLICATION METHOD /AS PER MANUFACTURES specification ,providing and laying in trench cement concrete (1:4:8) with 40mm size hard grainte metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specifivcation and dirrection of thge engineer in charge.

Suppying all materials ,labour ,T & P and Constructing 1.040 m dia x 2 m deep soak way pit with dry pick having crossing stregth not less than 75 kg /cm2 to 99 kg/cm2 in cm (1:6) for the remaining 0.4572mm height of wall at top CC (1:3) INSIDE AND OUTSIDE INSIDE FILL with dry brick khoa size 38 mm CM thick RCC perforated slab to a height of 1.9012 m from bottom covered by means of 50mm thick RCC wall cover in pieces filled with iron plugs including earth work in excavtion refiiling of cavity around the pit and painting the iron works complete as per PHD desighn and specification including carraige of the all materials to site.

Earth work excavation in all kinds of soil within initial lead of 50 m. And initial lift of 1.5 m. including rough dressing and leveling the bed.

Earth work excavation in all kinds of soil within initial lead of 50 m. And initial lift of 1.5 m. including rough dressing and leveling the bed With 1 extra lift of 1.50 m over intial laft.

Filling foundation with sand including water-ing & ramming with cost,conveyance,royal-ity of sand & labour charges etc.complete.

P.C.C (1:3:6) with 12mm size Crosser broken hard granite metal including watering,curing , with cost of all labour & materials.

Plain Cement Concrete of proportion (1:2:4) with 12mm & down graded size crusher broken H.G. chips including cost, conveyance & royalty of materials with all labour charges.

Supppying all materials ,labour T & P and providing cement concrete (1:1.5:3) with 12 mm size crusher broken hard ganite chips for RCC works including hoisting ,layinbg ,watering ,curing cost of all maerials to worksite ,payment of royality ,all taxex etc all complete as perPWD Specification.

Supplying all materials,labour,T&P and providing steel reinforceement of Fe-415/Fe-500 grade for RCC work including cuttingbending,binding and tying the grills and placing in position including cost of binding wire 18 to 20gauge,cost or steel,conveyance of all materials to work site,payment of royality,all taxes etc all omplete as per PWD specification and dircetion of the Engineer-in-charge

Suppying all materials ,labour ,T & P and providing rigid & smooth centering and shuttering for RCC works including false works and dismentalling them after casting including conveyance of all the materials to worksite ,payment of royality ,taxex etc .all complete as per specification and dirrection of the engineer in charge.

Brick work with Fly Ash bricks having crushing strength not less than 75kg/cm2 in cement mortar(1:3) in including watering ,curing ,cost of all materials covayance of all materials to work site ,payment of royality taxex etcll complete as per specification and dirrection of the engineer in charge

Suppying all materils ,labour T and P and providing 12 mm thick cement plaster (1:3) on brick work including watering ,curing ,cost of all materials covayance of all materials to work site ,payment of royality taxex etcll complete as per specification and dirrection of the engineer in charge. .

Supplying all Materials labour T&P and fitting and fixing 12mm dia MS/CI step iron incccluding supply of necessary CC (1:2:4) For fixing etc.complete as per PH specification

Supplying all Materials,labour T&P for providing fitting &fixing 100mm*100 mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing Conveyance of all Materials to work site payment of royality all complete as specificatons and dircetion of Engineer in Charge

Labour drilling a perfectly vertical bore hole of specified dia for a specified depth below ground levelthrough consolidated and unconsolidated roc with down the hole hammer drilling rig or combination rig as required suit the sif required to ite condition as per the direction of the Engineer in charge including use of own rig with its accessories,tools and plant and consumables etc for lowering of 200mm/150mm diaG.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft,medium,hard and boulder(G.I/P.V.C/M.S Casing pipes if required to prevent collapse ofoverburden is to be provided by the contractor including lowering and with drawing after completion of the tube well),200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore (only00mtr to30mtr)

30 mtr to 215.00 mtr

Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity rom ground level up to 45.00 mtr depth andfitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials,tools and plant etc all complete and keeping tjhe top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials Lowering of 200mm dia P.V.Ccasing pipes 00 mtr to 30 mtrs

Supplying polyvinyl chloride pipes asc per ASTM-D-1785-89 having threads in accordance with DIN 2999 Part-1/DIN-42225 Part-II specification length of pipe (laying length ) will be 3 mtrs.The pipes shall be supplied with both external and threaded with free socket.the pipe having external thread at one end i.e female and or belled end.The female end having internal thread is to be belled in order to accept the male and while jointing pipes with a bread threading shall be provided with a grave at the roof of the male thread accomodate flexible PVC/Rubber'O' ring to make the joint water tight colour of the pipe shall be blue.The name of manufacture along with batch No class of pipe shall be standard royality each pipe l;ength 200 mm dia PVC 9(sch-80)pipe

Supplying all materials ,labour,T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe up tyo 5m below gropund level(as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the engineer in charge.Minimum one meter of casing pipe to be inserted in bore in the work at bottom to ensure sanitary sealing(excluding cost of cement which will supplied directly by the department)

Cleaning and Developing the tube well with supply of compreesor worked till cleqar and eduquate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge (By DTH Rig)

Supplying all materials,equipment,labour, T&P providing,fitting and fixing submersible pump with squirrel cage induction type submersible electric moter to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conformiong to IS;8034/89 with Specification with suitable control panel jointing with GI/PVC/HDPE PIPES,Electrification,testing,commissioning,trail running,conveyence of all materials to work site,payment of taxes etc all complete as per specification and direction of the engineer in charge (1H.P Single phase/three phase head renge of 20 to 30 mtr with discgharge capacity 1456 to 110 L.P.M with outlet dia 25mm 9(keeping 100% standby)

DOLcontrol panel

40mm dia steel short piece

Well cap

50mm sizer CI bracket

2.50sqmm flat cable

20mm dia rigid UPVC pipes

steel rope with cover

Labour charges for lowereing including transporation

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS:4984/2000910Kgf/sqcm) of the following nominal bore with clamps and jointing by fushion welding method including testing,making good the wall,ceiling and floor all complete as per specification and direction of the enginner in charge. (32 mm ( HDPE Pipes Finolex and supreme make )

Please Enable Macros to View BoQ information