Improvements of Reporting Centre by way of upgradation and Providing and Fixing of Chain-link Fencing at Manloo. Gamma Unit K-04 Forest Protection Force Pulwama.

Amount

E/W in excavtion in foundation trenches or drains ( not exceeding 1.5 mts in width as well as 10 sqmts on plan) including dressing of sides & ramming of botoms, lift up to 1.5mts & lead of 50 mts including getting out the execavated soil and disposal of surplus execavated soil as directed.

Providing & laying dry stone soling, sand/dust under room floor and packed including ramming, watering and dressing including all carriages, Head load etc from approved source up to site of work complete.

Centering and shuttering including strutting, propping etc and removal of form work for. Foundations, footings, bases of columns etc. including all carriages, Head load etc from approved source up to site of work complete.

Providing & laying cement concrete of specificied grade excl cost of centering and shuttering 1:2:4 (1cement, 2 coarse sand, 4 graded stone aggregate 20mm nominal size) including Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job. Crushed.

Providing & fixing of Angle Iron Posts made of MS Angles (50x50x6 mm) including cutting, hoisting, fixing in position and applying a priming coat of approved red oxide steel primier with Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job.

Providing & fixing of Black annealed Wire Crate made out of 4.00 mm B.A. Wire (Wire as per IS: 280) machine woven both ends bent of 50x50 mm mesh size including strengthing with nuts, bolts and washers as per required qunatity & size and as per directions of Engineer-in-charge. with Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job.(Chain Link fencing).

Providing & fixing of Angle Iron 7.5 feet length (50x50x6 mm), Flate Iron 50x6 mm with welded mesh 2''x2'' including fixing in concrete blocks with all necessary fittings with a premixing coat of steel primer and two coats of steel paint with Mechnical carriage, Head load, loading & unloading etc from approved source up to actual site of work complete job. (Enterance Gate).

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry. But excluding the cost of nosing of steps etc complete. (50 mm thick with 20 mm nominal size stone. including all carriages, Head load etc from approved source up to site of work complete. CRUSHED.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge (In Cement Mortor)

Brick work with F.S.P bricks of class designaion 75 in foundation & plinth, in cement mortor (1 cement :6 coarse sand). including all carriages, Head load etc from approved source up to site of work complete.

Fixing of availible wood work in frames of Doors, windows, clerestory windows and other frames, wrought framed and fixed in position, 3’’x5”.

Fixing of availible 30 mm thick paneled or paneled & glazed shutters for doors, windows and clerestory windows including ISI marked MS pressed butt hinges bright finished of required size with necessary screws.

Fixing of availible 30 mm thick Wire gauze shutters using galvanized MS wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows including ISI marked MS butt hinges bright finished, butt hinges of required size with necessary screws.

Providing 40x5 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix. (1 cement: 3 coarse sand : 6 graded stone 20 mm nominal size) Including all carriages of material from approved source up to site of work complete.

12 mm cement plaster of mix 1:4. (1 cement : 4 coarse sand). Including all carriages of material from approved source up to site of work complete job. Outer & Inner Walls.

Providing & fixing ISI marked oxidized M.S tower bolts black finish (Barrel Type) with necessary screws etc complete job. 200X10 mm including all carriages of material from approved source up to site of work complete job.

Providing & fixing ISI marked oxidized M.S Handles with necessary screws etc complete job. 125 mm including all carriages of material from approved source up to site of work complete job.

Providing & fixing ISI marked 85 mm x 42 mm oxidized M S pull bolt lock with necessary screws, nuts, bolts etc including all carriages of material from approved source up to site of work complete job.

Providing & fixing oxidized M S casement stays (straight peg type) with necessary screws etc complete job. 250 mm weight not less than 150 gram including all carriages of material from approved source up to site of work complete job.

Providing & fixing of Glass pans with beading and nails etc. Including all carriages of material from approved source up to site of work complete job.

Providing & fixing Marble of Standrad /approved make in all colours & shades over 20mm thick bed of cement mortor 1:4 mix (1 cement :4 course sand) including all pointing the joints with white cement including moulding with all carriages of material from approved source up to site of work complete job.

Providing & fixing Ist quality ceramic glazed tiles of minimum thickness 5 mm of approved make in all colours & shades in cement motor 1:3 mix. Including all carriages of material from approved source up to site of work complete.

Providing & fixing ceramic glazed floor tiles 300x300 mm (thickness to be specificed of ist quality ) of approved make in all colours & shades in cement motor 1:4 mix.Including all carriages of material from approved source up to site of work complete.

Sanitary work Including all carriages of material from approved source up to site of work including all required accessories/parts with all fittings complete job. C P fittings & Chinaware of standrad quality for below mentioned items

Providing & fixing of English WC pan with seat cover.

Providing & fixing of Low level cistern PVC 10 litrs of standrad quality.

Providing & fixing Flat back Washbasin with pedestral.

Providing & fixing of CP Angle value.

Providing & fixing of CP health faucet.

Providing & fixing of looking mirror of standrad quality.

Providing & fixing of towel ring.

Providing & fixing of soap cases.

Providing & fixing of Glass Shelves

Providing & fixing of centre hole basin mixer of approved quality for wash basins.

Providing & fixing of wall mixer non telephonic for bath Rooms of approved quality.

Providing & fixing of 50 litre capacity geezer of ISI mark including all fittings & fixtures complete job.

Providing & fixing PVC pipes 100mm. B Class

Providing & fixing PVC pipes 75mm. B Class

Providing & fixing bib cocks

Providing & fixing of concealed G.I.pipes 15mm complete with G.I.fittings. C Class

Providing & fixing of concealed G.I.pipes 20mm complete with G.I.fittings. C Class

Providing & fixing of PVC Storage Tank including all fittings & fixtures complete job.

Providing & fixing of Concealed Electrification of standrad quality passing through plastic channels / conduits in 3/20 & 7/20 wire incld cost of channels, conduits, nails, wiring, etc & labour charges comp job.

Lighting points (1.5mm sq. wire).

Lighting Circuits with (2.5mm sq. wire).

Heating Points with (4mm wire ,15 Amp).

Fan Points.

5 Amp Power Points with (2.5mm wire).

Half/ Indicator Points.

Iron D Box of standrad make, 18 way.

MCB 6-32 Amp

MCB DP 32- Amp

MCB DP 63- Amp

18 inch Sweep ceiling Fans of approved quality.

Three pin Sockes points.

Exausters

Clf saver

Service Line (7/20 wire)

Applying Primier with ready mixed red oxide Zinc Chromate primier of approved brand and manafacture on steel galvanised iron/steel works. including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete.

Painting with ready mixed synthetic enamel paint of approved brand and manafacture in all shades to given an even shade. (two or more coats on new steel work) including Mechnical carriage, Head load, loading & unloading etc from approved source up to site of work complete.

Applying priming coat with ready mixed pink or grey primer of approved brand and manafacture on wood work. (Hard & soft wood).

Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work.

Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly.

Distempering with oil bound washable distemper of approved brand and manafacture to give an even shade two or more coats on new work and including priming coat with cement primer.

Finishing walls with textured exterior paint of required shade on new work (two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofig cement paint applied @ 2.20kg/10sqm. (Exterior finishing).

Prince Parvez Ahmed Bhat

M/S M. I. CONSTRUCTIONS